Comparison of phenanthrene biodegradation by free and immobilized cell systems: formation of hydroxylated compounds

A novel approach to modify Stenotrophomonas sp. D6 by regulating the salt composition in the growth medium: Enhanced removal performance of Cr(VI)

In this study, a novel and effective modified microbial reducing agent was developed to detoxify Cr(VI) from aqueous solutions. This was achieved by carefully controlling specific salt components in the growth medium. Based on the single-salt modification, several effective modified salts were selected and added to the medium for synergistic modification. The results showed that the synergistic modification with NH4Cl and KH2PO4 had the best detoxification effect on Cr(VI), reaching 98.5% at 100 mg/L Cr(VI), which was much higher than the 43.7% of the control (original Luria-Bertani medium). This enhancement was ascribed to the ability of NH4Cl and KH2PO4 to stimulate the growth of Stenotrophomonas sp. D6 promoted chromate reductase secretion. The protein content of the modified medium supernatant was significantly increased by 10.76% compared to that before modification. Based on the micro-characterization, the main process for the elimination of Cr(VI) is microbial reduction rather than biosorption. Most of the reduced Cr was found in the extracellular suspension, thereby suggesting that the primary reduction occurred outside the cells, whereas only a small fraction was detected intracellularly. Overall, this study provides a simple and effective method for microbial treatment of heavy metals in aqueous solutions.

Investigating the effect of electrosprayed alginate/PVA beads size on the microbial growth kinetics: Phenol biodegradation through immobilized activated sludge

The presence of cyclic organic compounds, including phenol, in the wastewater of many industries has made phenol removal an important issue. Meanwhile, the biological methods of removing phenol have attracted the attention of researchers in recent years. Recently, the use of immobilized microbial cells is proposed as a new approach in industrial wastewater treatment. In this research, the aim is to study the effect of immobilized beads size on the phenol biodegradation efficiency and specific microbial growth rate. For this purpose, electrospray technique was used to immobilize activated sludge in hybrid matrix of alginate and polyvinyl alcohol (PVA). The fabricated alginate/PVA beads were characterized using Fourier transform infrared spectroscopy (FTIR). Evaluation of the results related to the free and immobilized cell systems in the shake flask experiments showed that at low phenol concentrations the immobilized cell system had the same performance as the free cell system, while the immobilized cell system at higher concentrations had a better performance in removing phenol so that at a concentration of 2000 mg/L, removal percentage has increased from 15% to 25-34%. On the other hand, in this survey, the kinetic behavior of activated sludge was in good agreement with Haldane's equation. Moreover, the maximum specific growth rate was measured 0.033 and 0.041 (h^-1) beside 544 and 636 mg/L substrate inhibition constant, for free and immobilized cell systems, respectively. This result shows that the phenol biodegradation has been improved by using the cell immobilization technique especially with applying the smaller beads, which is due to improved mass transfer and microbial cell protection from harsh environments.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

Accelerated PAH Transformation in the Presence of Dye Industry Landfill Leachate Combined with Fungal Membrane Lipid Changes

The ascomycete fungus Nectriella pironii, previously isolated from soil continuously contaminated by dye industry waste, was used for the biodegradation of phenanthrene (PHE), benz[a]anthracene (B[a]A), and benz[a]pyrene (B[a]P). The degradation of polycyclic aromatic hydrocarbons (PAHs) by N. pironii was accelerated in the presence of landfill leachate (LL) collected from the area of fungus isolation. The rate of cometabolic elimination of PHE and B[a]P in the presence of LL was, respectively, 75% and 94% higher than in its absence. LC-MS/MS analysis revealed that PAHs were converted to less-toxic derivatives. The parallel lipidomic study showed changes in membrane lipids, including a significant increase in the content of phosphatidylcholine (PC) (almost double) and saturated phospholipid fatty acids (PLFAs) and a simultaneous reduction (twofold) in the content of phosphatidylethanolamine (PE) and unsaturated PLFAs, which may have promoted the fungus to PHE + LL adaptation. In the presence of PHE, an intense lipid peroxidation (fivefold) was observed, confirming the stabilization of the cell membrane and its extended integrity. Determining the course of elimination and adaptation to harmful pollutants is essential for the design of efficient bioremediation systems in the future.

Immobilization of Biomass Materials for Removal of Refractory Organic Pollutants from Wastewater

In the field of environmental science and engineering, microorganisms, enzymes and algae are promising biomass materials that can effectively degrade pollutants. However, problems such as poor environmental adaptability, recycling difficulties, and secondary pollution exist in the practical application of non-immobilized biomass materials. Biomass immobilization is a novel environmental remediation technology that can effectively solve these problems. Compared with non-immobilized biomass, immobilized biomass materials have the advantages of reusability and stability in terms of pH, temperature, handling, and storage. Many researchers have studied immobilization technology (i.e., methods, carriers, and biomass types) and its applications for removing refractory organic pollutants. Based on this, this paper reviews biomass immobilization technology, outlines the mechanisms and factors affecting the removal of refractory organic pollutants, and introduces the application of immobilized biomass materials as fillers for reactors in water purification. This review provides some practical references for the preparation and application of immobilized biomass materials and promotes further research and development to expand the application range of this material for water purification.

Preparation of Micron-Scale Activated Carbon-Immobilized Bacteria for the Adsorption–Biodegradation of Diesel Oil

This paper investigated the micron-scale activated carbon (MAC) immobilized diesel-oil-degrading bacteria (bio-MAC) used as remediation materials for the removal of diesel-oil-contaminated water. The high-efficiency indigenous diesel-oil-degrading bacteria were firstly screened and enriched, then the MAC was used as a diesel oil sorbent and biocarrier for the immobilization of degrading bacteria to prepare the bio-MAC material. The removal performance of the bio-MAC was evaluated via a comparison with the freely degrading bacteria and MAC. The SEM results demonstrated that the diesel-oil-degrading bacteria were effectively immobilized and grew well on the surfaces of MAC particles. The concentration of MAC significantly influenced the growth and activity (DHA and LPS) of immobilized bacteria, and the MAC addition of 3.0 g/L was proven to be an optimum amount for the preparation of bio-MAC. The high-throughput sequencing analysis further indicated that the bacteria immobilized on MAC showed higher abundance levels and diversities index values compared to freely suspended bacteria, such as Pseudomonas, Rhodococcus, Bacillus and Microbacterium. The FTIR spectroscopy results showed that the bio-MAC could effectively degrade the aliphatic hydrocarbons, alkenes and aromatic compounds of diesel oil to carboxylic acids, esters, alcohols and other metabolites. When the concentration of diesel oil was 1 g/L, the removal efficiency for the diesel oil of bio-MAC reached 86.35% after 15 days, while only 23.82% and 70.97% of the diesel oil was removed using the same amount of free bacteria and MAC, respectively. The prepared bio-MAC showed a synergic effect of adsorption and biodegradation and efficiently removed diesel oil from wastewater.

Influence of Membrane Vibration on Particles Rejection Using a Slotted Pore Membrane Microfiltration

A new method is proposed to increase the rejection in microfiltration by applying membrane oscillation, using a new type of microfiltration membrane with slotted pores. The oscillations applied to the membrane surface result in reduced membrane fouling and increased separation efficiency. An exact mathematical solution of the flow in the surrounding solution outside the oscillating membrane is developed. The oscillation results in the appearance of a lift velocity, which moves oil particles away from the membrane. The latter results in both reduced membrane fouling and increased oil droplet rejection. This developed model was supported by the experimental results for oil water separation in the produced water treatment. It was proven that the oil droplet concentration was reduced notably in the permeate, due to the membrane oscillation, and that the applied shear rate caused by the membrane oscillation also reduced pore blockage. A four-times lower oil concentration was recorded in the permeate when the membrane vibration frequency was 25 Hz, compared to without membrane vibration. Newly generated microfiltration membranes with slotted pores were used in the experiments.

Construction of biotreatment platforms for aromatic hydrocarbons and their future perspectives

Aromatic hydrocarbons (AHCs) are one of the major environmental pollutants introduced from both natural and anthropogenic sources. Many AHCs are well known for their toxic, carcinogenic, and mutagenic impact on human health and ecological systems. Biodegradation is an eco-friendly and cost-effective option as microorganisms (e.g., bacteria, fungi, and algae) can efficiently breakdown or transform such pollutants into less harmful and simple metabolites (e.g., carbon dioxide (aerobic), methane (anaerobic), water, and inorganic salts). This paper is organized to offer a state-of-the-art review on the biodegradation of AHCs (monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs)) and associated mechanisms. The recent progress in biological treatment using suspended and attached growth bioreactors for the biodegradation of AHCs is also discussed. In addition, various substrate growth and inhibition models are introduced along with the key factors governing their biodegradation kinetics. The growth and inhibition models have helped gain a better understanding of substrate inhibition in biodegradation. Techno-economic analysis (TEA) and life cycle assessment (LCA) aspects are also described to assess the technical, economical, and environmental impacts of the biological treatment system.

Sustainable biodegradation of phenol by immobilized Bacillus sp. SAS19 with porous carbonaceous gels as carriers

In this study, high-efficient phenol-degrading bacterium Bacillus sp. SAS19 which was isolated from activated sludge by resuscitation-promoting factor (Rpf) addition, were immobilized on porous carbonaceous gels (CGs) for phenol degradation. The phenol-degrading capabilities of free and immobilized Bacillus sp. SAS19 were evaluated under various initial phenol concentrations. The obtained results showed that phenol could be removed effectively by both free and immobilized Bacillus sp. SAS19. Furthermore, for degradation of phenol at high concentrations, long-term utilization and recycling were more readily achieved for immobilized bacteria as compared to free bacteria. Immobilized bacteria exhibited significant increase in phenol-degrading capabilities in the third cycle of recycling and reuse, which demonstrated 87.2% and 100% of phenol (1600 mg/L) degradation efficiency at 12 and 24 h, respectively. The present study revealed that immobilized Bacillus sp. SAS19 can be potentially used for enhanced treatment of synthetic phenol-laden wastewater.

Pyrene biodegradation with layer-by-layer assembly bio-microcapsules

Biotechnology is considered as a promising technology for the removal of polycyclic aromatic hydrocarbons from the environment. Free bacteria are often sensitive to some biotic and abiotic factors in the environment to the extent that their ability to effect biodegradation of organic pollutants, such as polycyclic aromatic hydrocarbons, is hampered. Consequently, it is imperative to carry out investigations into biological systems that will obviate or aid tolerance of bacteria to harsh environmental conditions. Chitosan/alginate bio-microcapsules produced using layer-by-layer (LBL) assembly method were tested for pyrene (PYR) biodegradation under harsh environmental conditions. Morphology observation indicated that the flake bio-microcapsules could be successfully prepared through LBL assembly method. Surface analysis showed that the bio-microcapsules had large fractions of mesopores. The results of the biodegradation experiments revealed that the 95% of 10mgL^-1 PYR could be removed by the bacteria encapsulated chitosan/alginate bio-microcapsules in 3 days, which was higher than that of the free bacteria (59%). Compared to the free cells, the bacteria encapsulated chitosan/alginate bio-microcapsules produced 1-6 times higher PYR biodegradation rates at a high initial PYR concentration (50mgL^-1) and extremely low pH values (pH =3) or temperatures (10°C or 40°C), as well as high salt stress. The results indicated that bacteria in microcapsules treatment gained a much higher tolerance to environmental stress and LBL bio-microcapsule could be promising candidate for remediating the organic pollutants.

Polyvinyl alcohol-immobilized Phanerochaete chrysosporium and its application in the bioremediation of composite-polluted wastewater

A novel biosorbent, polyvinyl alcohol (PVA)-immobilized Phanerochaete chrysosporium, was applied to the bioremediation of composite-polluted wastewater, containing both cadmium and 2,4-dichlorophenol (2,4-DCP). The optimum removal efficiency achieved was 78% for Cd(II) and 95.4% for 2,4-DCP at initial concentrations of 20 mg/L Cd(II) and 40 mg/L 2,4-DCP. PPBs had significantly enhanced the resistance of P. chrysosporium to 2,4-DCP, leading to the degradation rates of 2,4-DCP beyond 90% with varying initial 2,4-DCP concentrations. This research demonstrated that 2,4-DCP and secreted proteins might be used as carbon and nitrogen sources by PVA-immobilized P. chrysosporium beads (PPBs) for Cd(II) removal. Fourier transform infrared spectroscopy analysis showed that hydroxyl and carboxyl groups on the surface of PPBs were dominant in Cd(II) binding. The mechanism underlying the degradation of 2,4-DCP into fumaric acid and 1-hexanol was investigated. The adsorption-desorption studies indicated that PPBs kept up to 98.9% of desorption efficiency over three cycles.

Bioremediation of pesticide-contaminated water resources: the challenge of low concentrations

The use of pesticides in agricultural and urban environments has improved quality of life around the world. However, the resulting accumulation of pesticide residues in fresh water resources has negative effects on aquatic ecosystem and human health. Bioremediation has been proposed as an environmentally sound alternative for the remediation of pesticide-contaminated water resources, though full-scale implementation has thus far been limited. One major challenge that has impeded progress is the occurrence of pesticides at low concentrations. Recent research has improved our fundamental understanding of pesticide biodegradation processes occurring at low concentrations under a variety of environmental scenarios and is expected to contribute to the development of applied bioremediation strategies for pesticide-contaminated water resources.