A review on progress of heavy metal removal using adsorbents of microbial and plant origin

Characterization of heavy metal-associated bacteria from petroleum-contaminated soil and their resistogram and antibiogram analysis

The aim of the current study was to screen and identify heavy metal (chromium, cadmium, and lead) associated bacteria from petroleum-contaminated soil of district Muzaffarabad, Azad Jammu and Kashmir, Pakistan to develop ecofriendly technology for contaminated soil remediation. The petroleum-contaminated soil was collected from 99 different localities of district Muzaffarabad and the detection of heavy metals via an atomic absorption spectrometer. The isolation and identification of heavy metals-associated bacteria were done via traditional and molecular methods. Resistogram and antibiogram analysis were also performed using agar well diffusion and agar disc diffusion methods. The isolated bacteria were classified into species, i.e., B. paramycoides, B. albus, B. thuringiensis, B. velezensis, B. anthracis, B. pacificus Burkholderia arboris, Burkholderia reimsis, Burkholderia aenigmatica, and Streptococcus agalactiae. All heavy metals-associated bacteria showed resistance against both high and low concentrations of chromium while sensitive towards high and low concentrations of lead in the range of 3.0 ± 0.0 mm to 13.0 ± 0.0 mm and maximum inhibition was recorded when cadmium was used. Results revealed that some bacteria showed sensitivity towards Sulphonamides, Norfloxacin, Erythromycin, and Tobramycin. It was concluded that chromium-resistant bacteria could be used as a favorable source for chromium remediation from contaminated areas and could be used as a potential microbial filter.

Comprehensive assessment of carbon-, biomaterial- and inorganic-based adsorbents for the removal of the most hazardous heavy metal ions from wastewater

Owing to the high cost of recycling waste, underdeveloped countries discharge industrial, agricultural, and anthropogenic effluents without pretreatment. As a result, pollutant-loaded waste enters water bodies. Among the diverse toxic contaminants, heavy metal ions are the most detrimental because of their chronic toxicity, non-degradability, prevalence, and bioaccumulation. The growing shortage of water resources demands the removal of heavy metal ions from wastewater. Three SDGs of the sustainability agenda of the United Nations appeal for clean water to protect life beneath water and on land depending on the water sources. Therefore, efficient environmentally friendly approaches for wastewater treatment are urgently required. In this regard, several methods have been developed for the removal of heavy metal ions from wastewater, including adsorption as the most widely used method owing to its eco-friendly, cost-effective, and sustainable nature. The present review discusses the progress in the preparation and application of various adsorbents based on carbon, micro-organisms, agricultural waste and inorganic materials for the extraction of toxic metal ions such as Pb2+, Cr6+, As3+, As5+, Hg2+ and Cd2+. Herein, we provide information on the role of the homogeneity and heterogeneity of adsorbents, kinetics of the adsorption of an adsorbate on the surface of an adsorbent, insights into adsorption reaction pathways, the mechanism of the sorption process, and the uptake of solutes from solution. The present review will be useful for researchers working on environmental protection and clean environment.

Microbial strategies for copper pollution remediation: Mechanistic insights and recent advances

Environmental contamination is aninsistent concern affecting human health and the ecosystem. Wastewater, containing heavy metals from industrial activities, significantly contributes to escalating water pollution. These metals can bioaccumulate in food chains, posing health risks even at low concentrations. Copper (Cu), an essential micronutrient, becomes toxic at high levels. Activities like mining and fungicide use have led to Copper contamination in soil, water, and sediment beyond safe levels. Copper widely used in industries, demands restraint of heavy metal ion release into wastewater for ecosystem ultrafiltration, membrane filtration, nanofiltration, and reverse osmosis, combat heavy metal pollution, with emphasis on copper.Physical and chemical approaches are efficient, large-scale feasibility may have drawbackssuch as they are costly, result in the production of sludge. In contrast, bioremediation, microbial intervention offers eco-friendly solutions for copper-contaminated soil. Bacteria and fungi facilitate these bioremediation avenues as cost-effective alternatives. This review article emphasizes on physical, chemical, and biological methods for removal of copper from the wastewater as well asdetailing microorganism's mechanisms to mobilize or immobilize copper in wastewater and soil.

Enzymes Involved in Antioxidant and Detoxification Processes Present Changes in the Expression Levels of Their Coding Genes under the Stress Caused by the Presence of Antimony in Tomato

Currently, there is an increasing presence of heavy metals and metalloids in soils and water due to anthropogenic activities. However, the biggest problem caused by this increase is the difficulty in recycling these elements and their high permanence in soils. There are plants with great capacity to assimilate these elements or make them less accessible to other organisms. We analyzed the behavior of Solanum lycopersicum L., a crop with great agronomic interest, under the stress caused by antimony (Sb). We evaluated the antioxidant response throughout different exposure times to the metalloid. Our results showed that the enzymes involved in the AsA-GSH cycle show changes in their expression level under the stress caused by Sb but could not find a relationship between the NITROSOGLUTATHIONE REDUCTASE (GSNOR) expression data and nitric oxide (NO) content in tomato roots exposed to Sb. We hypothesize that a better understanding of how these enzymes work could be key to develop more tolerant varieties to this kind of abiotic stress and could explain a greater or lesser phytoremediation capacity. Moreover, we deepened our knowledge about Glutathione S-transferase (GST) and Glutathione Reductase (GR) due to their involvement in the elimination of the xenobiotic component.

One-Step Fabrication of Recyclable Konjac Glucomannan-Based Magnetic Nanoparticles for Highly Efficient Cr(VI) Adsorption

Recently, the natural polymer polysaccharide konjac glucomannan (KGM) has received attention as a promising adsorbent in water treatment due to its low toxicity, cost-effectiveness and biocompatibility. However, the high-level water absorbency of KGM makes it difficult to recover in water treatment. In this study, by combining KGM with magnetic nanoparticles, KGM-based magnetic nanoparticles (KGM-Fe3O4 NPs) with excellent adsorption properties and recyclability for heavy metals were prepared using an one-step precipitation method. The as-prepared KGM-Fe3O4 NPs have a spherical morphology of superparamagnetism with a small particle size (ca. 7.0 nm) and a large specific surface area (160.1 m2·g-1). Taking Cr(VI) as the target heavy metal ion, the above nanoparticles have a high adsorption capacity and fast adsorption rate for Cr(VI). The pseudo-second order kinetic model is more suitable to describe the adsorption process of Cr(VI) by KGM-Fe3O4 NPs, and the maximum adsorption capacity of Cr(VI) onto KGM-Fe3O4 NPs was calculated to be 41.67 mg·g-1 using the Langmuir isotherm model. In addition, KGM-Fe3O4 NPs with adsorbed heavy metal ions can be quickly recovered from a solution, regenerated, and reused in the next cycle. KGM-based Fe3O4 nanoparticles are promising adsorbents that show significant reusability for the removal of metal ions in water and wastewater treatment.

Adsorption of Pb2+ and Cu2+ in wastewater by lignosulfonate adsorbent prepared from corn straw

The heavy metal ions contained in industrial wastewater are a great threat to human health. Exploring a adsorbent which have low-cost, green environmental friendly, high adsorption capacity, good recycle is key to solve heavy metal ions pollution. Lignin sulfonate was obtained by treating corn stover, and then modified lignin sulfonate was obtained by hydrothermal method. The porous structure makes heavy metal ions occupy more internal adsorption sites. Modified lignosulfonate adsorbent efficiency removes heavy metals in wastewater especially Cu2+ and Pb2+. The adsorption capacity of Cu2+ on modified lignosulfonate is 450.3 mg g-1, Pb2+ is 475.4 mg g-1. In addition, for 40 mg L-1 Cu2+ and Pb2+ using 0.4 g L-1, the adsorption equilibrium is only reached within 60 min. Meanwhile, the removal ratio of Pb is 83 %, Cd is 72 %, Cu is 87 %, Zn is 36 %, Mn is 25 %, Cr is 95 %, and Fe is 99 % in wastewater using 0.4 g L-1 adsorbent in 2 h. This research develops a practical adsorbent to remove heavy metals from actual wastewater.

Rhizospheric bacteria: the key to sustainable heavy metal detoxification strategies

The increasing rate of industrialization, anthropogenic, and geological activities have expedited the release of heavy metals (HMs) at higher concentration in environment. HM contamination resulting due to its persistent nature, injudicious use poses a potential threat by causing metal toxicities in humans and animals as well as severe damage to aquatic organisms. Bioremediation is an emerging and reliable solution for mitigation of these contaminants using rhizospheric microorganisms in an environmentally safe manner. The strategies are based on exploiting microbial metabolism and various approaches developed by plant growth promoting bacteria (PGPB) to minimize the toxicity concentration of HM at optimum levels for the environmental clean-up. Rhizospheric bacteria are employed for significant growth of plants in soil contaminated with HM. Exploitation of bacteria possessing plant-beneficial traits as well as metal detoxifying property is an economical and promising approach for bioremediation of HM. Microbial cells exhibit different mechanisms of HM resistance such as active transport, extra cellular barrier, extracellular and intracellular sequestration, and reduction of HM. Tolerance of HM in microorganisms may be chromosomal or plasmid originated. Proteins such as MerT and MerA of mer operon and czcCBA, ArsR, ArsA, ArsD, ArsB, and ArsC genes are responsible for metal detoxification in bacterial cell. This review gives insights about the potential of rhizospheric bacteria in HM removal from various polluted areas. In addition, it also gives deep insights about different mechanism of action expressed by microorganisms for HM detoxification. The dual-purpose use of biological agent as plant growth enhancement and remediation of HM contaminated site is the most significant future prospect of this article.

Beneficial Microorganisms Improve Agricultural Sustainability under Climatic Extremes

The challenging alterations in climate in the last decades have had direct and indirect influences on biotic and abiotic stresses that have led to devastating implications on agricultural crop production and food security. Extreme environmental conditions, such as abiotic stresses, offer great opportunities to study the influence of different microorganisms in plant development and agricultural productivity. The focus of this review is to highlight the mechanisms of plant growth-promoting microorganisms (especially bacteria and fungi) adapted to environmental induced stresses such as drought, salinity, heavy metals, flooding, extreme temperatures, and intense light. The present state of knowledge focuses on the potential, prospective, and biotechnological approaches of plant growth-promoting bacteria and fungi to improve plant nutrition, physio-biochemical attributes, and the fitness of plants under environmental stresses. The current review focuses on the importance of the microbial community in improving sustainable crop production under changing climatic scenarios.

Cocoyam powder extracted from Colocasia antiquorum as a novel plant-based bioflocculant for industrial wastewater treatment: Flocculation performance and mechanism

In the current investigation, the comparative study of cocoyam bioflocculant (CYBF) and chemical flocculant for the removal of heavy metals, COD, BOD, TDS, TSS, sulphate and nitrate from tannery effluent, and dyes from synthetic dye wastewater were examined. Different analytical techniques, including Fourier transforms infrared (FTIR), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDX), were used to characterise the extracted bioflocculant. FTIR spectral measurement of the bioflocculant demonstrated the presence of hydroxyl, carboxyl, and amino groups. By using bioflocculant, the highest removal of TSS (85.5%), TDS (76.2%), BOD (74%), COD (50.5%), sulphate (54.4%), nitrate (52%), Lead (65%), Chromium (60%), Nickel (57.9%), from tannery effluent was achieved at pH 6 and bioflocculant dosage of 8 mg/L. While, 80% congo red, 79% methyl orange, 73% safranin, and 72% methylene blue were removed from synthetic dye wastewater by cocoyam bioflocculant. Two flocculation mechanisms were found for dye removal, electrostatic force of attraction, and hydrogen bonding. In the case of metal adsorption, only electrostatic interactions were observed between metal ions and functional groups of bioflocculant. The cocoyam bioflocculant exhibited excellent flocculation efficacy and thus can be used in wastewater treatment to remove heavy metals and other pollutants.

Treatment and remediation of metal-contaminated water and groundwater in mining areas by biological sulfidogenic processes: A review

Heavy metal pollution in the mining areas leads to serious environmental problems. The biological sulfidogenic process (BSP) mediated by sulfidogenic bacteria has been considered an attractive technology for the treatment and remediation of metal-contaminated water and groundwater. Notwithstanding, BSP driven by different sulfidogenic bacteria could affect the efficiency and cost-effectiveness of the treatment performance in practical applications, such as the microbial intolerance of pH and metal ions, the formation of toxic byproducts, and the consumption of organic electron donors. Sulfur-reducing bacteria (S⁰RB)-driven BSP has been demonstrated to be a promising alternative to the commonly used sulfate-reducing bacteria (SRB)-driven BSP for treating metal-contaminated wastewater and groundwater, due to the cost-saving in chemical addition, the high efficiency in sulfide production and metal removal efficiency. Although the S⁰RB-driven BSP has been developed and applied for decades, the present review works mainly focus on the developments in SRB-driven BSP for the treatment and remediation of metal-contaminated wastewater and groundwater. Accordingly, a comprehensive review for metal-contaminated wastewater treatment and groundwater remediation should be provided with the incorporation of the SRB- and S⁰RB-driven BSP. To identify the bottlenecks and to improve BSP performance, this paper reviews sulfidogenic bacteria presenting in metal-contaminated water and groundwater; highlight the critical factors for the metabolism of sulfidogenic bacteria during BSP; the ecological roles of sulfidogenic bacteria and the mechanisms of metal removal by sulfidogenic bacteria; and the application of the present sulfidogenic systems and their drawbacks. Accordingly, the research knowledge gaps, current process limitations, and future prospects were provided for improving the performance of BSP in the treatment and remediation of metal-contaminated wastewater and groundwater in mining areas.

Guar gum, a low-cost sustainable biopolymer, for wastewater treatment: A review

Rapid population growth and the resultant pollution of freshwater resources have created a water stress condition reducing the availability of safe and affordable water. Guar gum, a biocompatible macromolecule obtained from the endosperm of the seeds of Cyamopsis tetragonolobus, is a fascinating raw material for multifunctional adsorbents. This review assembled the work conducted by various researchers over the past few decades and discussed the structure, properties, and different modifications methods employed to develop versatile guar gum-based adsorbent. The paper also summarized the recent progress of guar gum-based nanocomposites for the remediation of multiple hazardous substances such as organic dyes, toxic heavy metal ions, oil-water separation as well as inhibiting the growth of bacterial pathogens. Thus, the important contribution of guar gum composites to safeguard the water quality is highlighted which will overcome the limitations and streamline the future course of innovative research.

N-doped carbon fibers in situ prepared by hydrothermal carbonization of Camellia sinensis branches waste for efficient removal of heavy metal ions

N-doped carbon fibers (NCFs) were in situ prepared by Camellia sinensis branches waste through hydrothermal carbonization with urea/ZnCl2 at 160-280 °C under 0.8-8.9 MPa. The structural characteristics of NCFs were investigated by elemental analysis, SEM, TEM, XRD, XPS, Raman spectra, and BET surface area. The highest N content of NCFs obtained at 280 °C was 8.96%, and the main forms of doped N were pyridinic N, pyrrolic N, and graphitic N. Moreover, NCFs were applied to remove metal ions successfully. The results showed that NCF-240 had the maximum adsorption amounts of 106.52, 125.23, and 153.49 mg/g for Cu2+, Pb2+, and Zn2+, respectively, while NCF-280 had the best removal ability on Cr6+ (145.67 mg/g). Finally, it demonstrated that the adsorption behavior of NCFs was well fitted by the pseudo-second-order kinetic and the Langmuir adsorption isotherm models.

A critical and recent developments on adsorption technique for removal of heavy metals from wastewater-A review

This review provides a quantitative description of the nano-adsorbent processing and its viability against wastewater detoxification by extracting heavy metal ions. The impact of nano-adsorbent functionalities on specific essential attributes such as the surface area, segregation, and adsorption capacity were comprehensively evaluated. A detailed analysis has been presented on the characteristics of nanomaterials through their limited resistance to adsorb some heavy metal ions. Experimental variables such as the adsorbent dosage, pH, substrate concentration, response duration, temperature, and electrostatic force that influence the uptake of metal ions have been studied. Besides, separate models for the adsorption kinetics and isothermal adsorption have been investigated to understand the mechanism behind adsorption. Here, we reviewed the different adsorbent materials with nano-based techniques for the removal of heavy metals from wastewater and especially highlighted the nano adsorption technique. The influencing factors such as pH, temperature, dosage time, sorbent dosage, adsorption capacities, ion concentration, and mechanisms related to the removal of heavy metals by nano composites are highlighted. Lastly, the application potentials and challenges of nano adsorption for environmental remediation are discussed. This critical review would benefit engineers, chemists, and environmental scientists involved in the utilization of nanomaterials for wastewater treatment.

Role of microbes in bioaccumulation of heavy metals in municipal solid waste: Impacts on plant and human being

The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.

Microbial application in remediation of heavy metals: an overview

Heavy metal contamination poses a menacing threat to all living forms in the natural world due to its catastrophic consequences, contributing to environmental pollution. The need for human beings increasing each day along with anthropological activity is contributing directly to the destruction of the environment with the release of a large number of heavy metals into the food chain. These metals can be accumulated in the food chains and are very extremely toxic even at low concentrations. Heavy metals aggregation can deteriorate the healthy ecosystem of the water bodies as well. One of the major concerns is the diminution and administration of the heavy metals aggregating in marine water bodies and lakes. Heavy metals are not degradable and thus tend to remain in the environment for a prolonged time period. Heavy metal aggregation can demonstrate immediate repercussions such as DNA damage, inhibition of respiration and photosynthesis, and rapid reactive oxygen species generation. Conventional or standard chemical and physical methods for remediation of heavy metals are uneconomical and lead to the production of a large magnitude of chemical waste. This shifts the focus and interest towards the utilization of microbes in remediation of heavy metals from the environment which is eco-friendly and economical. To contend with heavy metals, microorganisms have a specific mechanism such as biotransformation, biosorption, and homeostasis. The microbial system is responsive to the toxicity that is created by the heavy metals which are easily water-soluble and available in the environment. The current review article describes the sources and effects of metal ions in the environment followed by bioremediation strategies followed in their remediation. Microbial approaches in remediation of metal ions from extraterrestrial materials are depicted in the paper.

Efficient removal of a low concentration of Pb(II), Fe(III) and Cu(II) from simulated drinking water by co-immobilization between low-dosages of metal-resistant/adapted fungus Penicillium janthinillum and graphene oxide and activated carbon

Drinking water safety cannot be overemphasized. Filamentous fungi have many excellent features for metal removal. Both graphene oxide (GO) and activated carbon (AC) are conventional metal adsorbents, but they are not suitable for large-scale use due to high cost. In this study, a low dosage of conidia (2.0 × 10⁴ conidia/mL) of metal-resistant/adapted filamentous fungus Penicillium janthinillum strain GXCR were co-immobilized with a low dosage of 0.5 mg/L GO or 0.5 mg/L AC by embedding in 2% polyvinyl alcohol (PVA)-3% sodium alginate (SA), generating six types of microbead adsorbents (MBAs) to remove metals from a low concentration of either single metal (100 mg/L) or mixed metals (100 mg/L each) of Pb (II), Fe (III) and Cu (II) in drinking water. Fungus GXCR-containing MBAs had higher specific surface areas (SSAs), better mesoporous structures, and a higher removal rate (85-98.99%) of single or mixed metals. Singl-metal adsorptions of MBAs were almost unaffected by temperature changes. MBAs showed a stable removal rate of 87-94% during four cycles of adsorption-desorption of single metal. Single-metal adsorptions were well described by multiple models of Freundlich isotherm with constant values of 0.21-0.432, Langmuir isotherm with constant values of 0.037-0.17, Pseudo-fist-order, Pseudo-second-order, and intra-particle diffusion (IPD). In conclusion, co-immobilization between GXCR, GO and AC can make metal removal more efficient. Adsorption capacity is increased with SSAs but not in the same proportion. Single-metal adsorptions involve multiple mechanisms of monolayer and multilayer adsorptions, external mass transfer, and IPD. IPD is important but not the only one rate-controlling step for single-metal adsorptions.

A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils

Heavy metal pollution remains a global environmental challenge that poses a significant threat to human life. Various methods have been explored to eliminate heavy metal pollutants from the environment. However, most methods are constrained by high expenses, processing duration, geological problems, and political issues. The immobilization of metals, phytoextraction, and biological methods have proven practical in treating metal contaminants from the soil. This review focuses on the general status of heavy metal contamination of soils, including the excessive heavy metal concentrations in crops. The assessment of the recent advanced technologies and future challenges were reviewed. Molecular and genetic mechanisms that allow microbes and plants to collect and tolerate heavy metals were elaborated. Tremendous efforts to remediate contaminated soils have generated several challenges, including the need for remediation methodologies, degrees of soil contamination, site conditions, widespread adoptions and various possibilities occurring at different stages of remediation are discussed in detail.

Recent Developments in Microbe-Plant-Based Bioremediation for Tackling Heavy Metal-Polluted Soils

Soil contamination with heavy metals (HMs) is a serious concern for the developing world due to its non-biodegradability and significant potential to damage the ecosystem and associated services. Rapid industrialization and activities such as mining, manufacturing, and construction are generating a huge quantity of toxic waste which causes environmental hazards. There are various traditional physicochemical techniques such as electro-remediation, immobilization, stabilization, and chemical reduction to clean the contaminants from the soil. However, these methods require high energy, trained manpower, and hazardous chemicals make these techniques costly and non-environment friendly. Bioremediation, which includes microorganism-based, plant-based, microorganism-plant associated, and other innovative methods, is employed to restore the contaminated soils. This review covers some new aspects and dimensions of bioremediation of heavy metal-polluted soils. The bioremediation potential of bacteria and fungi individually and in association with plants has been reviewed and critically examined. It is reported that microbes such as Pseudomonas spp., Bacillus spp., and Aspergillus spp., have high metal tolerance, and bioremediation potential up to 98% both individually and when associated with plants such as Trifolium repens, Helianthus annuus, and Vallisneria denseserrulata. The mechanism of microbe's detoxification of metals depends upon various aspects which include the internal structure, cell surface properties of microorganisms, and the surrounding environmental conditions have been covered. Further, factors affecting the bioremediation efficiency and their possible solution, along with challenges and future prospects, are also discussed.

Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment

Water is required for the existence of all living things. Water pollution has grown significantly, over the decades and now it has developed as a serious worldwide problem. The presence and persistence of Hazardous pollutants such as dyes, pharmaceuticals and personal care products, heavy metals, fertilizer and pesticides and their transformed products are the matter of serious environmental and health concerns. A variety of approaches have been tried to clean up water and maintain water quality. The type of pollutants present in the water determines the bulk of technological solutions. The main objective of this article was to review the occurrences and fate of hazardous contaminants (dyes, pharmaceuticals and personal care products, heavy metals, and pesticides) found in wastewater effluents. These effluents mingle with other streams of water and that are utilized for a variety of reasons such as irrigation and other domestic activities that is further complicating the issue. It also discussed traditional treatment approaches as well as current advances in hazardous pollutants removal employing graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other innovative forms of useable materials. It also discussed the identification and quantification of harmful pollutants using various approaches, as well as current advancements. Finally, a risk assessment of hazardous pollutants in water is provided in terms of the human health and the environment. This data is anticipated to serve as a foundation for future improvements in hazardous pollutant risk assessment. Furthermore, future studies on hazardous pollutants must not only emphasize on the parent chemicals, as well as on their possible breakdown products in various media.

Advances in nanocellulose-based materials as adsorbents of heavy metals and dyes

In recent years, nanocellulose-based materials have been increasingly applied as a lot of biosorbents for the treatment of water pollutants due to their large specific surface area, easy modification, environmental friendliness, and reproducibility. In this review, surface modification of nanocellulose-based adsorbents with various effective adsorption groups is described, as well as polymer grafting and hybrid composite fabrication. The adsorption mechanisms involved in the adsorption process of pollutants by adsorbents are further analysed and summarized. The regeneration methods of nanocellulose adsorbents with different adsorption mechanisms are also demonstrated. In addition, this paper also briefly describes the forms of nanocellulose-based adsorbents with large-scale application including membranes, gels, flocculants and magnetic composites.

Modification of Enteromorpha prolifera with dielectric barrier discharge plasma to enhance malachite green adsorption

Dyes, a kind of visible chemical, have severe deleterious effects on human health and ecological environment. In this work, batch biosorption experiments were carried out under various experimental conditions such as pH value and agitation time to optimize the potentiality of Enteromorpha prolifera for the removal of malachite green (MG) dye from aqueous solution (70·7%). Then, the algal biomass was treated with a dielectric barrier discharge (DBD) in helium for 4 and 10 min to enhance MG removal efficiency (84·7 and 96·6%). In addition, Fourier-transform infrared spectroscopy in combination with scanning electron microscopy was employed to monitor the chemical and physical changes of algal cells treated by DBD. This study illustrates that DBD may serve as an effective tool to activate the functional groups on the cell wall surface for dye binding, and it even offers an alternative new technique to improve the adsorption properties of native biosorbents for the removal of toxic dyes from wastewater.

Continuous and efficient immobilization of heavy metals by phosphate-mineralized bacterial consortium

Traditional sewage treatment technology cannot remove heavy metals, which needs to be improved urgently. Lysinibacillus with the function of bio-mineralization was screened and loaded on granular sludge to form a phosphate-mineralized bacterial consortium, which demonstrated the ability of self-regulating pH and automatic solid-liquid separation. Heavy metals could be fixed on the bacterial consortium to produce stable and harmless phosphate minerals. The highest removal efficiency of Pb(Ⅱ), Cd(Ⅱ), and Ni(Ⅱ) were 97.9%, 70%, and 40%, respectively. Organic matter and other metal ions in actual polluted water had little effect on the Pb(Ⅱ) removal efficiency. Mechanism analysis was conducted through 3D-EEM, XRD, SEM-EDS, XPS, FTIR, and high-throughput sequencing analyses. The bacterial consortium was a multi-species coexistence system, but Lysinibacillus played a major role in removing Pb(Ⅱ). C-O and O-H bonds of tyrosine and phosphorous organics were broken by enzyme catalysis and the metal-oxygen bond (Pb-O) was formed. Mineral crystals in the reactor accumulated, transforming from the initial phase non-crystalline structure to the metaphase Pb₃(PO₄)₂ and eventually to the Pb₅(PO₄)₃OH. This research obtained a promising technique for immobilizing Pb(Ⅱ) or other hazardous metals continuously and efficiently.

The use of Phanerochaete chrysosporium for modification of bentonite for preconcentration and determination of heavy metals

In this study, a solid phase extraction method was successfully applied in the preconcentration and determination of trace levels of Cu(II) and Cd(II) ions and Phanerochaete chrysosporium (white rot fungus) modified bentonite was used as adsorbent. After the biosorption of Cu(II) and Cd(II) ions, metal concentrations in the samples were determined by atomic absorption spectrophotometry. pH, adsorbent amount, eluent type, sample volume, and flow rate, which are effective in the adsorption of metal ions, have been studied. 1 M HCl was used for desorption of these metal ions retained (recovery 95–100%). In addition, the effect of interfered ions has also been investigated. Sorption data were examined according to Langmuir and Freundlich adsorption equations. The results obtained show that the applied method has a high metal biosorption capacity, and Cu(II) and Cd(II) ions are successfully recovered. It was also successful in applying the proposed enrichment method to real water samples.

Recovery values between 92.3% and 97.3% were obtained for the studied metal ions. According to the results, the proposed method can be successfully applied to water analysis at 95% confidence interval.

Closing the loop in a constructed wetland for the improvement of metal removal: the use of Phragmites australis biomass harvested from the system as biosorbent

Among the numerous clean-up techniques for water treatment, sorption methods are widely used for the removal of trace metals. Phragmites australis is a macrophyte commonly used in constructed wetlands for water purification, and in the last decades, its use as biosorbent has attracted increasing attention. In view of a circularly economy approach, this study investigated improvement of trace metal removal by recycling the biomass of P. australis colonizing a constructed wetland, which operates as post-treatment of effluent wastewater from an activated sludge plant serving the textile industrial district of Prato (Italy). After the annual mowing of the reed plants, the biomass was dried and blended to derive a sustainable and eco-friendly biosorbent and its sorption capacity for Fe, Cu, and Zn was investigated comparing the batch system with the easier-to-handle column technique. The possibility of regeneration and reuse of the biosorbent was also evaluated. The biomaterial showed an interesting sorption capacity for Cu, Fe, and Zn, both in batch and in column experiments, especially for Fe ions. The immobilization of the biosorbent in column filters induced some improvement in the removal efficiency, and, in addition, this operation mode has the advantage of being much more suitable for practical applications than the batch process.

In situ phytoremediation of heavy metal-contaminated soil and groundwater: a green inventive approach

The heavy metal contamination of soil and groundwater is a serious threat to environment worldwide. The survival of human being primarily relies upon soil and groundwater sources. Therefore, the remediation of heavy metal-contaminated soil and groundwater is a matter of utmost concern. Heavy metals are non-degradable and persist in the environment and subsequently contaminate the food chain. Heavy metal pollution puts a serious impact on human health and it adversely affects our physical body. Although, numerous in situ conventional technologies have been utilized for the treatment purpose, but most of the techniques have some limitations such as high cost, deterioration of soil properties, disturbances to soil native flora and fauna and intensive labour. Despite that, in situ phytoremediation is a cost-effective, eco-friendly, solar-driven and novel approach with significant public acceptance. The past research reflects rare discussion addressing both (heavy metal in situ phytoremediation of soil and groundwater) in one platform. The present review article covers both the concepts of in situ phytoremediation of soil and groundwater with major emphasis on health risks of heavy metals, enhanced integrated approaches of in situ phytoremediation, mechanisms of in situ phytoremediation along with effective hyperaccumulator plants for heavy metals remediation, challenges and future prospects.

Long-term domestication to Mn stresses alleviates the inhibition on anammox process

Heavy metals such as Mn²⁺ are common contaminants in ammonium-rich wastewater. The information of Mn²⁺ effect on anammox process needs further investigation. The short- and long-term effects of Mn²⁺ on anammox were explored by anammox granular sludge. Batch tests showed that the half inhibition value (IC₅₀ ) of Mn²⁺ was 4.83 mg/L. The anammox activity was severely inhibited in 0.5 hr under 15 mg/L Mn²⁺ . However, after long-term domestication by increasing the concentration of Mn²⁺ , both the low-load reactor (R1) and the high-load reactor (R2) performed well, achieving volumetric nitrogen removal rate of 6.36 kg/(m³ ·d) and 13.99 kg/(m³ ·d), respectively. The average ammonium and nitrite removal efficiency of both reactors under 200 mg/L Mn still maintained above 90%. The results from long-term reactors' operation showed that the serious inhibition effect indicated by the batch test was significantly exaggerated. The granules became dispersed after long-term operation in the high-load reactor (R2) which might be correlated to the high osmotic pressure caused by high Mn²⁺ load, and the mechanism needs to be investigated further. PRACTITIONER POINTS: The half inhibition value of Mn2+ on anammox sludge was 4.83 mg/L in batch experiment. 200 mg/L Mn2+ did not cause any inhibition on anammox process during long-term operation. Granular sludge is finer under high nitrogen loads with 200 mg/L Mn stress.

Micromonospora metallophores: A plant growth promotion trait useful for bacterial-assisted phytoremediation?

Heavy metal pollution in the environment is an increasing problem due to natural and anthropogenic activities. The use of bacteria for bioremediation of soils contaminated with heavy metals has gained a lot of attention as it can be considered effective, economic and environmentally sustainable. In this work, we investigated the capacity of endophytic Micromonospora strains isolated from different legumes, to produce metallophores against a variety of heavy metals in vitro. Genome mining using available endophytic Micromonospora genome sequences revealed the presence of genes related to metal acquisition, iron metabolism and resistance to toxic compounds. In vitro production of metallophores demonstrated that all strains tested produced chelates against arsenic, cobalt, copper, chromium, iron, mercury, molybdenum, nickel, vanadium and zinc in different amounts. In addition, the plant growth promotion effect of strains GAR05 and PSN13 on Arabidopsis thaliana grown in the presence of several heavy metals was tested. Under these conditions, the plants inoculated with the strain GAR05 showed significant growth when compared to the control plants suggesting a plant growth promotion effect in the form of tolerance to the toxic substances. Furthermore, during this plant-bacterium interaction, a new bacterial structure named root-bead was observed on the roots of A. thaliana suggesting a strong interaction between the two organisms and a clear positive effect of the bacterium on the plant. Overall, these results highlight the potential use of endophytic Micromonospora strains for bacterial-assisted phytoremediation of contaminated sites.

Selective, highly efficient extraction of Cr(III), Pb(II) and Fe(III) from complex water environment with a tea residue derived porous gel adsorbent

A novel macroporous (~150 μm) double network hydrogel (TR/PAA) was prepared from tea residue and acrylic acid, and its performance was systematically evaluated. The static adsorption experiments showed that gel exhibited high selectivity and adsorption capacity, ultrafast kinetics (~10 min) for Cr(III), Pb(II) and Fe(III). The adsorption behavior showed heterogeneous and chemisorption process adsorption capacities of 206.19, 253.16, and 94.88 mg g^-1 for Cr(III), Pb(II) and Fe(III), respectively. In pluralistic systems, TR/PAA showed the adsorption order of Fe(III) > Cr(III) > Pb(II). Mechanism studies confirm that nitrogen and oxygen-containing functional groups play a major role in the adsorption process. In the fixed-bed column experiments, the treatment volume of simulated wastewater reached 1400 bed volumes (BV) (21.6 L), producing only 7 BV (323 mL) eluent. This work provides a new avenue for the combination of TR/PAA reuse and heavy metal removal, which is expected to be applied in actual wastewater treatment.

A fixed bed column study of natural and chemically modified Lagerstroemia speciosa bark for removal of synthetic Cr(VI) ions from aqueous solution

The present study evaluates the feasibility of using natural Lagerstroemia speciosa bark (NLSB) and chemically modified Lagerstroemia speciosa bark (CLSB) in removing Cr(VI) from aqueous solution in fixed bed column process. The effect of influent flow rate, bed depth and inlet Cr(VI) ion concentration on the Cr(VI) removal capacity of NLSB and CLSB was investigated. The column exhaustion time increased with increase in bed depth and reverse trend was obtained with increase in flow rate and influent Cr(VI) ion concentration. The Bohart-Adams, Thomas and Yoon-Nelson dynamic models were applied at various studied experimental conditions to predict the breakthrough curve behavior and to determine the characteristics fixed bed column parameters that are very crucial in scale up of the column process for its industrial scale application. Both Thomas and Yoon-Nelson models showed very good agreement with the column data and explained the mechanism of Cr(VI) adsorption by NLSB and CLSB in column process. The high Cr(VI) adsorption capacity and regeneration efficiency of NLSB and CLSB in column suggest its applicability in removal of Cr(VI) present in industrial effluents.

Remediation techniques for removal of heavy metals from the soil contaminated through different sources: a review

Heavy metal pollution is one of the serious problems and contaminates the environment by different means with the blow of industries in several countries. Different techniques like physical, chemical, and biological have been used for removal of heavy metal contaminants from the environment. Some of these have limitations such as cost, time consumption, logistical problems, and mechanical involvedness. Nowadays, in situ immobilization of metals, phytoremediation and biological techniques turned out to be best solution for elimination of metal(loid) s from the soil. Here, we reviewed the different remediation techniques for extraction of heavy metals from soil and especially highlighting in situ immobilization technique. The aim of remediation efforts at the contaminant site is to restrict the heavy metal to enter in the environment, food chain, and exposure to humans beings. The type of method used at a given site depends on the various factors like natural processes take place at the contaminated site, soil type, type of chemicals, and the depth of contaminated site.

Eco-Friendly β-cyclodextrin and Linecaps Polymers for the Removal of Heavy Metals

Environment-friendly nanosponges, having a high content of carboxyl groups, were synthesized by crosslinking β-cyclodextrin and linecaps, a highly soluble pea starch derivative, with citric acid in water. Additionally, pyromellitic nanosponges were prepared by reacting β-cyclodextrin and linecaps with pyromellitic dianhydride in dimethyl sulfoxide and used in comparison with the citric nanosponges. After ion-exchange of the carboxyl groups H⁺ with sodium ions, the ability of the nanosponges to sequester heavy metal cations was investigated. At a metal concentration of 500 ppm, the pyromellitate nanosponges exhibited a higher retention capacity than the citrate nanosponges. At lower metal concentrations (≤50 ppm) both the citrate and the pyromellitate nanosponges showed high retention capacities (up to 94% of the total amount of metal), while, in the presence of interfering sea water salts, the citrate nanosponges were able to selectively adsorb a significantly higher amount of heavy metals than the pyromellitate nanosponges, almost double in the case of Cu²⁺.

Bioaccumulation of potentially toxic elements by submerged plants and biofilms: A critical review

The accumulation of potentially toxic elements (PTEs) in aquatic ecosystems has become a global concern, as PTEs may exert a wide range of toxicological impacts on aquatic organisms. Submerged plants and the microorganisms attached to their surfaces, however, have displayed great potential as a means of coping with such pollution. Therefore, it is crucial to understand the transport pathways of PTEs across sediment and organisms as well as their accumulation mechanisms in the presence of submerged plants and their biofilms. The majority of previous studies have demonstrated that submerged plants and their biofilms are indicators of PTE pollution in the aquatic environment, yet relatively little is known about PTE accumulation in epiphytic biofilms. In this review, we describe the transport pathways of PTEs in the aquatic environment in order to offer remarkable insights into bioaccumulation mechanisms in submerged plants and their biofilms. Based on the literature cited in this review, the roles of epiphytic biofilms in bioaccumulation and as an indicator of ecosystem health are discussed.

Novel Colorimetric Method for Simultaneous Detection and Identification of Multimetal Ions in Water: Sensitivity, Selectivity, and Recognition Mechanism

Accurate recognition and speciation analysis of heavy-metal ions in complex hydrological environments is always a serious challenge. In this work, we proposed a small-molecule-based ultrasensitive colorimetric detection strategy and successfully applied it to the accurate detection of Fe²⁺, Fe³⁺, Co²⁺, and Hg²⁺ in groundwater through the specific recognition of multiple ligands of different metal ions. The detection limits for Hg²⁺, Co²⁺, Fe²⁺, and Fe³⁺ are calculated to be 6.51, 0.34, 0.49, and 1.01 ppb, respectively, which are far below the drinking water standards and superior to most of the reported colorimetric sensors. Remarkably, the speciation analysis of Fe²⁺/Fe³⁺ also has been successfully realized by a one-step method without complex pretreatment. The speciation and concentration of Fe²⁺ and Fe³⁺ in actual water samples can be accurately identified and monitored. In addition, as an attempt of visual onsite detection, we have developed a simple test strip, which has been applied to visual monitoring of four metal ions with the detection limit estimated by the naked eye to be as low as ppb level. This proposed colorimetric method realizes the rapid, sensitive, and portable multiple metal ions recognition and Fe²⁺/Fe³⁺ speciation analysis, displaying great potential for onsite rapid water quality analysis.

Bioremediation of Waste Water to Remove Heavy Metals Using the Spent Mushroom Substrate of Agaricus bisporus

The presence of heavy metals in waste water brings serious environmental pollution that threatens human health and the ecosystem. Bioremediation of heavy metals has received considerable and growing interest over the years. Thus, this paper presents the use of the Spent Mushroom Substrate (SMS) of Agaricus bisporus cultivation as a bioremediating agent to remove heavy metals that are present in industrial waters. These metals include chromium, lead, iron, cobalt, nickel, manganese, zinc, copper and aluminium. In particular, this study analyses the performance of SMS bioreactors with different groups of heavy metals at various concentrations. Between 80% and 98% of all contaminants that were analysed can be removed with 5 kg of SMS at hydraulic retention times of 10 and 100 days. The best removal efficiencies and longevities were achieved when removing iron (III), nickel and cobalt from contaminated water at a pH of 2.5. These results suggest that SMS can successfully treat waste water that has been contaminated with heavy metals.

Impacts of the heavy metals Cu (II), Zn (II) and Fe (II) on an Anammox system treating synthetic wastewater in low ammonia nitrogen and low temperature: Fe (II) makes a difference

In this study, the impacts of heavy metals (1 mg L^-1) on the nitrogen removal, bioactivity of anaerobic ammonia-oxidizing bacteria (AAOB) and the microbial community of anaerobic ammonium oxidation (Anammox) process were investigated. It was observed that short-term exposure in Cu (II) and Zn (II) both improved AAOB bioactivity, while long-term exposure significantly lowered the nitrogen removal to 0.218 and 0.302 kg m^-3 d^-1, when treated the wastewater with 100 mg L^-1 nitrogen under 14-16 °C. Fe(II) had slight impact on Anammox in short-term experiment but deeply enhanced nitrogen removal during the long-term contact, and finally increased the that to 0.58 kg m^-3 d^-1. The impact on Anammox was Cu(II) > Zn(II) > Fe(II). Cu(II) and Zn(II) lowered the share of Candidatus Kuenenia to 3.32% and 3.80%, while Fe(II) improved that to 11.30% from 7.99%. Extracellular polymeric substance in biofilm had prominent iron adsorption capacity, which was the key factor that help AAOB resist Fe(II).

Hydration of Ordinary Portland Cement in Presence of Lead Sorbed on Ceramic Sorbent

Lead, a highly toxic element, is frequently present in various solid wastes as well as in industrial effluents. Sorption with a low cost sorbent is a simple way of Pb removal from liquid streams, but stabilization of spent sorbent has to be ensured in order to prevent Pb leaching out and possible environmental contamination. In previous research, ceramic sorbent, generated as waste product in brick industry, was tested as sorbent and proved high sorption capacity for lead. Lead was sorbed partially as hydrocerussite and partially as adsorbed surface layer. The Pb leaching from sorbent was very high and thus further immobilization of sorbent was necessary. Lead, as well as other heavy metals, is known as retarder of the hydration process of Ordinary Portland Cement (OPC), used for the immobilization. In this paper, influence of sorbed Pb and PbO, as reference compound, on cement hydration was studied by calorimetry, thermogravimetry and Magic Angle Spinning Nuclear Magnetic Resonance Spectroscopy (MAS NMR). The sorbed lead was found to be less detrimental to hydration retardation due to the lower solubility of precipitated hydrocerussite in basic environment compared to PbO, which forms plumbate anion.

Assessment of Cadmium Scavenging Potential of Canna indica L

The aquatic plant, Canna indica L. (Indian shoot) of Cannaceae family was investigated to assess cadmium scavenging potential at 5, 10, 25, 50, 100 and 150 mg Cd L^-1 exposers. The results showed that Canna has considerable potential of cadmium accumulation, which was up to 58.69 and 10.13 mg Cd kg^-1 dry weight in root and shoot of Canna, respectively. The effects of different cadmium levels on biomass production of plant tissues were significantly (p = 0.05) showed negative relation due to cadmium toxicity. The root concentration factor was higher than the bioconcentration factor which indicated the lower translocation factor of Canna. Considering the high root concentration factor, average bioconcentration factor, rapid growth and optimum adaptive properties up to 100 mg Cd L^-1 level, the Canna could be employed as an eco-friendly and efficient aquatic plant for cadmium scavenging. This study plays a potential role in remediation of cadmium contaminated wastewater.

Toxicity and Bioremediation of Heavy Metals Contaminated Ecosystem from Tannery Wastewater: A Review

The discharge of untreated tannery wastewater containing biotoxic substances of heavy metals in the ecosystem is one of the most important environmental and health challenges in our society. Hence, there is a growing need for the development of novel, efficient, eco-friendly, and cost-effective approach for the remediation of inorganic metals (Cr, Hg, Cd, and Pb) released into the environment and to safeguard the ecosystem. In this regard, recent advances in microbes-base heavy metal have propelled bioremediation as a prospective alternative to conventional techniques. Heavy metals are nonbiodegradable and could be toxic to microbes. Several microorganisms have evolved to develop detoxification mechanisms to counter the toxic effects of these inorganic metals. This present review offers a critical evaluation of bioremediation capacity of microorganisms, especially in the context of environmental protection. Furthermore, this article discussed the biosorption capacity with respect to the use of bacteria, fungi, biofilm, algae, genetically engineered microbes, and immobilized microbial cell for the removal of heavy metals. The use of biofilm has showed synergetic effects with many fold increase in the removal of heavy metals as sustainable environmental technology in the near future.

Bagasse Cellulose Grafted with an Amino-Terminated Hyperbranched Polymer for the Removal of Cr(VI) from Aqueous Solution

A novel bio-adsorbent was fabricated via grafting an amino-terminated hyperbranched polymer (HBP-NH₂) onto bagasse cellulose. The morphology and microstructure of the HBP-NH₂-grafted bagasse cellulose (HBP-g-BC) were characterized and its adsorption capacity for Cr(VI) ions in aqueous solutions was investigated. The rough surface structure of HBP-g-BC that is beneficial for improving the adsorption capacity was observed by scanning electron microscopy (SEM). The grafting reaction was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. The adsorbent performance was shown to be better with a lower pH value, a higher adsorbent dosage, or a higher initial Cr(VI) concentration. Moreover, the kinetics study revealed that the adsorption behavior followed a pseudo-second-order model. The isotherm results showed that the adsorption data could be well-fitted by the Langmuir, Freundlich, or Temkin models. Moreover, HBP-g-BC could maintain 74.4% of the initial removal rate even after five cycles of regeneration. Thus, the high potential of HBP-g-BC as a bio-adsorbent for heavy metal removal has been demonstrated.

Green solid synthesis of polyaniline-silver oxide nanocomposite for the adsorptive removal of ionic divalent species of Zn/Co and their radioactive isotopes 65Zn/ 60Co

A comparative study between two nanosorbents, nanopolyaniline (NPANI) and nanopolyaniline coated with nanosilver oxide (NPANI-NAg₂O) is explored to dispose the divalent species of Zn/Co from water and radioactive isotopes ⁶⁵Zn/⁶⁰Co from radioactive wastewater using batch and column techniques. NPANI-NAg₂O nanocomposite was synthesized via solid-solid reaction. Characterization was achieved using FT-IR, TGA, XRD, SEM, HR-TEM, and surface area analysis. The images of SEM and HR-TEM confirmed the success of the modification process and the particle size was found in the range 28.78-68.28 nm (NPANI) and 25.74-85.71 nm (NPANI-NAg₂O), respectively. Solution pH, contact time, solid dosage, and ionic concentration of the metals were studied as fundamental factors. The obtained results indicated that the optimum conditions to dispose Zn/Co divalent species using NPANI were pH 7 and 30-33 min, while NPANI-NAg₂O exhibited the optimum conditions at pH 7 and 20-30 min. The maximum removal capacities were 100.1 and 139.75 mg/g for Zn(II) and 57.93 and 112.1 mg/g for Co(II) using NPANI and NPANI-NAg₂O, respectively. Graphical abstract ᅟ.

Using Myriophyllum aquaticum (Vell.) Verdc. to remove heavy metals from contaminated water: Better dead or alive?

This study aimed to investigate the potential of the invasive macrophyte Myriophyllum aquaticum to remove heavy metals. The elements tested were Cd, Cr, Ni, and Zn, in single-metal trials, and experiments were performed with both the living and dead biomass of the plant. In respect of metal removal by living plants, the element that was removed the most was Zn, though Cd showed the highest concentration in plant shoots. The metal negative effect on plant growth was, therefore, more important than the level of metal concentration in plant tissue in determining the removal percentages. All the metals were mostly accumulated in the roots, where a considerable fraction of the element was simply adsorbed to root cell wall, except in the case of Cr. In shoots, the fraction of the adsorbed metal was extremely low in respect to roots, thereby implying a lower apoplastic binding capacity. As regards a possible use of the dead biomass for metal removal, we proposed the generation of a hybrid biosorbent enclosing the dried and grounded plant biomass in cotton bags to improve its handling and its adsorption capacity, in view of a valid alternative to reduce the problems of packed beds. Cadmium-and especially Zn-were the elements removed most efficiently with respect to the other metals. On comparing the removal percentages of the living biomass and the hybrid biosorbent, our data deposed in favour of the use of M. aquaticum as dead biomass for a possible application of this invasive macrophyte in the biological treatment of metal-contaminated water. Our findings may be beneficial to metal removal application accompanying wetland management, devising a possible use of M. aquaticum waste material after its removal from the invaded habitats.