Concentration-dependent effects of carbon nanotubes on growth and biphenyl degradation of Dyella ginsengisoli LA-4

Effect of Different Tolerable Levels of Constitutive mcr-1 Expression on Escherichia coli

To study the effect of different tolerable levels of constitutive mcr-1 expression on Escherichia coli, and to provide direct evidence for moderate resistance mediated by mcr-1, construction of E. coli strains carrying mcr-1 on the chromosome with promoters of different strengths was conducted using λ-red recombination. Our results demonstrated that over-high expression of mcr-1 cannot be tolerated, and seven constructs with more than 200-fold mcr-1 transcriptional expression differences were obtained. The colistin MICs of the seven strains increased with the increase of MCR-1 levels, and the highest MIC was 8 μg/mL. Lower expression of mcr-1 didn't demonstrate many effects on bacteria, while higher tolerable expression of mcr-1 tended to show fitness costs in growth rate, competitive ability, and cell structures, but no obvious change of virulence was observed in mice. Bacteria demonstrated colistin MICs of 4-8 μg/mL at mcr-1 expression levels similar to clinical isolates, which were the mcr-1 expression levels with relatively lower fitness costs. IMPORTANCE The effects of relatively lower tolerable levels of mcr-1 were not evaluated thoroughly, and direct evidence for moderate resistance mediated by mcr-1 was lacking. In the present study, we made constructs carrying mcr-1 on the E. coli K12 chromosome under the control of serial constitutive promoters of different strengths and studied the effects of different tolerable levels of mcr-1 expression in vitro and in vivo. The results demonstrated that generally, except QH0007 (the construct with the highest mcr-1 expression that showed some extent of cell death), the fitness costs of tolerable mcr-1 expression on bacteria were not apparent or low. Bacteria demonstrated colistin MICs of 4-8 μg/mL at mcr-1 expression levels similar to clinical isolates, which corresponded to the lower levels of mcr-1 expression that can lead to colistin resistance, indicating the cleverness of bacteria to balance the benefit and cost of MCR-1-mediated colistin resistance.

Fenton-like reaction driving the degradation and uptake of multi-walled carbon nanotubes mediated by bacterium

Carbon nanotubes (CNTs) have been widely studied because of their potential applications. The increasing applications of CNTs and less known of their environmental fates rise concerns about their safety. In this study, the biotransformation of multi-walled carbon nanotubes (MWCNTs) by Labrys sp. WJW was investigated. Within 16 days, qPCR analysis showed that cell numbers increased 4.92 ± 0.36 folds using 100 mg/L MWCNTs as the sole carbon source. The biotransformation of MWCNTs, which led to morphology and functional group change, was evidenced by transmission electron microscopy and X-ray photoelectron spectroscopy analyses. Raman spectra illustrated that more defects and disordered carbon appeared on MWCNTs during incubation. The underlying biotransformation mechanism of MWCNTs through an extracellular bacterial Fenton-like reaction was demonstrated. In this bacteria-mediated reaction, the OH production was induced by reduction of H₂O₂ involved a continuous cycle of Fe(II)/Fe(III). Bacterial biotransformation of MWCNTs will provide new insights into the understanding of CNTs bioremediation processes.

Biogenic fenton-like reaction involvement in aerobic degradation of C60 by Labrys sp. WJW

Buckminster fullerene (C₆₀), the most representative type among fullerenes, has attracted widely attentions because of its many potential applications. The increasing application of fullerene and limited knowledge of its environmental fate are required concerns. Herein, the biotransformation of C₆₀ by Labrys sp. WJW was investigated. Cell numbers reached 25.76 ± 1.85 folds within 8 days using 100 mg/L C₆₀ as sole carbon source. The biotransformation of C₆₀ by Labrys sp. WJW was analyzed by various characterization methods. Raman spectra indicated that strain WJW broke the soccer ball like structure of C₆₀. After 12 days, over 60% of C₆₀ was degraded evidenced by UV-vis spectrophotometry and liquid chromatography-mass spectrometry. The underlying biotransformation mechanism of C₆₀ through an extracellular Fenton-like reaction was illustrated. In this reaction, the ^•OH production was mediated by reduction of H₂O₂ involving a continuous cycle of Fe(II)/Fe(III). Bacterial transformation of C₆₀ will provide new insights into the understanding of C₆₀ bioremediation process.

Mesocosm-based simulations to optimize a bioremediation strategy for the effective restoration of wildfire-impacted soils contaminated with high-molecular-weight hydrocarbons

AIMS

We obtained four microbial isolates from soil exposed to forest fire and evaluated their potential bioremediation activity when combined with a biosurfactant-producing bacterial strain for the decontamination of wildfire-impacted soil polluted with high-molecular-weight (HMW) hydrocarbons.

METHODS AND RESULTS

We established mesocosm trials to compare three bioremediation strategies: natural attenuation, bioaugmentation and biostimulation. Chemical analysis, culture-dependent and culture-independent methods were used to evaluate the bioremediation efficiency and speciation of the microbial cenoses based on these approaches. After treatment for 90 days, bioaugmentation removed 75·2-75·9% of the HMW hydrocarbons, biostimulation removed 63·2-69·5% and natural attenuation removed ~22·5%. Hydrocarbon degradation was significantly enhanced in the mesocosm supplemented with the biosurfactant-producing bacterial strain after 20 and 50 days of treatment compared to the other bioremediation strategies.

CONCLUSIONS

We found that the bioaugmentation approach was more effective than biostimulation and natural attenuation for the removal of HMW hydrocarbons from fire-impacted soil.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our study showed that micro-organisms from wildfire-impacted soil show significant potential for bioremediation, and that biosurfactant-producing bacterial strains can be combined with them as part of an effective bioremediation strategy.

Bacteria mediated Fenton-like reaction drives the biotransformation of carbon nanomaterials

Carbon nanomaterials (CNs), which gain heightened attention as novel materials, are increasingly incorporated into daily products and thus are released into the environment. Limited research on CNs environmental fates lags their industry growth, only few bacteria have been confirmed to biotransform CNs and the mechanism behind has not been revealed yet. In this study, four types of commercial CNs, i.e. graphene oxide (GO), reduced graphene oxide (RGO), single walled carbon nanotubes (SWCNTs), and oxidized (carboxylated) SWCNTs, were selected for investigation. The biotransformation of CNs by Labrys sp. WJW, which could grow with these CNs as the sole carbon source, was investigated. The bacterial transformation was proved by qPCR, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, liquid chromatography/time-of-flight/mass spectrometry, and gas chromatograph-mass spectrometry analyses. The biotransformation resulted in morphology change, defect increase and functional group change of these CNs. Furthermore, the underlying mechanism of CNs biodegradation mediated by extracellular Fenton-like reaction was demonstrated. In this reaction, the OH production was mediated by reduction of H₂O₂ involved a continuous cycle of Fe(II)/Fe(III). These findings reveal a novel degradation mechanism of microorganism towards high molecular weight substrate, which will provide a new insight into the environmental fate of CNs and the guidance for their safer use.

Microbial Communities Associated with Methylmercury Degradation in Paddy Soils

Bioaccumulation of the neurotoxin methylmercury (MeHg) in rice has raised worldwide concerns because of its risks to human health. Certain microorganisms are able to degrade MeHg in pure cultures, but the roles and diversities of the microbial communities in MeHg degradation in rice paddy soils are unknown. Using a series of microcosms, we investigated MeHg degradation in paddy soils from Hunan, Guizhou, and Hubei provinces, representing three major rice production regions in China, and further characterized one of the soils from the Hunan Province for microbial communities associated with MeHg degradation. Microbial demethylation was observed in all three soils, demonstrated by significantly more MeHg degraded in the unsterilized soils than in the sterilized controls. More demethylation occurred in water-saturated soils than in unsaturated soils, but the addition of molybdate and bromoethanesulfonic acid as the respective inhibitors of sulfate reducing bacteria and methanogens showed insignificant effects on MeHg degradation. However, the addition of Cu enhanced MeHg degradation and the enrichment of Xanthomonadaceae in the unsaturated soil. 16S rRNA Illumina sequencing and metatranscriptomic analyses of the Hunan soil consistently revealed that Catenulisporaceae, Frankiaceae, Mycobacteriaceae, and Thermomonosporaceae were among the most likely microbial taxa in influencing MeHg degradation in the paddy soil, and they were confirmed by combined analyses of the co-occurrence network, random forest modeling, and linear discriminant analysis of the effect size. Our results shed additional light onto the roles of microbial communities in MeHg degradation in paddy soils and its subsequent bioaccumulation in rice grains.

Azolla filiculoides L. as a source of metal-tolerant microorganisms

The metal hyperaccumulator Azolla filiculoides is accompanied by a microbiome potentially supporting plant during exposition to heavy metals. We hypothesized that the microbiome exposition to selected heavy metals will reveal metal tolerant strains. We used Next Generation Sequencing technique to identify possible metal tolerant strains isolated from the metal-treated plant (Pb, Cd, Cr(VI), Ni, Au, Ag). The main dominants were Cyanobacteria and Proteobacteria constituting together more than 97% of all reads. Metal treatment led to changes in the composition of the microbiome and showed significantly higher richness in the Pb-, Cd- and Cr-treated plant in comparison with other (95–105 versus 36–44). In these treatments the share of subdominant Actinobacteria (0.4–0.8%), Firmicutes (0.5–0.9%) and Bacteroidetes (0.2–0.9%) were higher than in non-treated plant (respectively: 0.02, 0.2 and 0.001%) and Ni-, Au- and Ag-treatments (respectively: <0.4%, <0.2% and up to 0.2%). The exception was Au-treatment displaying the abundance 1.86% of Bacteroidetes. In addition, possible metal tolerant genera, namely: Acinetobacter, Asticcacaulis, Anabaena, Bacillus, Brevundimonas, Burkholderia, Dyella, Methyloversatilis, Rhizobium and Staphylococcus, which form the core microbiome, were recognized by combining their abundance in all samples with literature data. Additionally, the presence of known metal tolerant genera was confirmed: Mucilaginibacter, Pseudomonas, Mycobacterium, Corynebacterium, Stenotrophomonas, Clostridium, Micrococcus, Achromobacter, Geobacter, Flavobacterium, Arthrobacter and Delftia. We have evidenced that A. filiculoides possess a microbiome whose representatives belong to metal-resistant species which makes the fern the source of biotechnologically useful microorganisms for remediation processes.

Effects of carbon nanotubes on biodegradation of pollutants: Positive or negative?

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment.

Exogenous Zn2+ enhance the biodegradation of atrazine by regulating the chlorohydrolase gene trzN transcription and membrane permeability of the degrader Arthrobacter sp. DNS10

Enhancing the biodegradation efficiency of atrazine, a kind of commonly applied herbicide, has been attracted much more concern. Here, Zn²⁺ which has long been considered essential in adjusting cell physiological status was selected to investigate its role on the biodegradation of atrazine by Arthrobacter sp. DNS10 as well as the transmembrane transport of atrazine during the biodegradation period. The results of gas chromatography showed that the atrazine removal percentages (initial concentration was 100 mg L^-1) in 0.05 mM Zn²⁺ and 1.0 mM Zn²⁺ treatments were 94.42% and 86.02% respectively at 48 h, while there was also 66.43% of atrazine left in the treatment without exogenous Zn²⁺ existence. The expression of atrazine chlorohydrolase gene trzN in the strain DNS10 cultured with 0.05 mM and 1.0 mM Zn²⁺ was 7.30- and 4.67- times respectively compared with that of the non-zinc treatment. In addition, the flow cytometry test suggests that 0.05 mM of Zn²⁺ could better adjust the membrane permeability of strain DNS10, meanwhile, the amount of atrazine accumulation in the strain DNS10 co-cultured with this level Zn²⁺ was 2.21 times of that of the strain without Zn²⁺. This study may facilitate a better understanding of the mechanisms that exogenous Zn²⁺ enhances the biodegradation of atrazine by Arthrobacter sp. DNS10.

Carbon nanotubes/carbon fiber hybrid material: a super support material for sludge biofilms

Carbon fiber (CF) is widely used as a sludge biofilm support material for wastewater treatment. Carbon nanotubes/carbon fiber (CNTs/CF) hybrid material was prepared by ultrasonically assisted electrophoretic deposition (EPD). CF supports (CF without handling, CF oxidized by nitric acid, CNTs/CF hybrid material) were evaluated by sludge immobilization tests, bacterial cell adsorption tests and Derjaguin -Landau -Verwey -Overbeek (DLVO) theory. We found that the CNTs/CF hybrid material has a high capacity for adsorbing activated sludge, nitrifying bacterial sludge and pure strains (Escherichia coli and Staphylococcus aureus). CNTs deposited on CF surface easily wound around the curved surface of bacterial cell which resulted in capturing more bacterial cells. DLVO theory indicated the lowest total interaction energy of CNTs/CF hybrid material, which resulted in the highest bacteria cell adsorption velocity. Experiments and DLVO theory results proved that CNTs/CF hybrid material is a super support material for sludge biofilms.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.