Removal of As(III) and As(V) from water by chitosan and chitosan derivatives: a review

Synthesis and Dye Adsorption Dynamics of Chitosan-Polyvinylpolypyrrolidone (PVPP) Composite

One major environmental issue responsible for water pollution is the presence of dyes in the aquatic environment as a result of human activity, particularly the textile industry. Chitosan-Polyvinylpolypyrrolidone (PVPP) polymer composite beads were synthesized and explored for the adsorption of dyes (Bismarck brown (BB), orange G (OG), brilliant blue G (BBG), and indigo carmine (IC)) from dye solution. The CS-PVPP beads demonstrated high removal efficiency of BB (87%), OG (58%), BBG (42%), and IC (49%). The beads demonstrated a reasonable surface area of 2.203 m2/g and were negatively charged in the applicable operating pH ranges. TGA analysis showed that the polymer composite can withstand decomposition up to 400 °C, proving high stability in harsh conditions. FTIR analysis highlighted the presence of N-H amine, O-H alcohol, and S=O sulfo groups responsible for electrostatic interaction and hydrogen bonding with the dye molecules. A shift in the FTIR bands was observed on N-H and C-N stretching for the beads after dye adsorption, implying that adsorption was facilitated by hydrogen bonding and Van der Waals forces of attraction between the hydroxyl, amine, and carbonyl groups on the surface of the beads and the dye molecules. An increase in pH increased the adsorption capacity of the beads for BB while decreasing OG, BBG, and IC due to their cationic and anionic nature, respectively. While an increase in temperature did not affect the adsorption capacity of OG and BBG, it significantly improved the removal of BB and IC from the dye solution and the adsorption was thermodynamically favoured, as demonstrated by the negative Gibbs free energy at all temperatures. Adsorption of dye mixtures followed the characteristic adsorption nature of the individual dyes. The beads show great potential for applications in the treatment of dye wastewater.

Application of manganese oxide-based materials for arsenic removal: A review

In the context of growing arsenic (As) contamination in the world, there is an urgent need for an effective treatment approach to remove As from the environment. Industrial wastewater is one of the primary sources of As contamination, which poses significant risks to both microorganisms and human health, as the presence of As can disrupt the vital processes and synthesis of crucial macromolecules in living organisms. The global apprehension regarding As presence in aquatic environments persists as a key environmental issue. This review summarizes the recent advances and progress in the design, strategy, and synthesis method of various manganese-based adsorbent materials for As removal. Occurrence, removal, oxidation mechanism of As(III), As adsorption on manganese oxide (MnOx)-based materials, and influence of co-existing solutes are also discussed. Furthermore, the existing knowledge gaps of MnOx-based adsorbent materials and future research directions are proposed. This review provides a reference for the application of MnOx-based adsorbent materials to As removal.

Static and dynamic adsorption of arsenate from water by Fe3+ complexed with 3-aminopropyltriethoxysilane-modified carboxymethyl chitosan

Fe3+ complexed with 3-aminopropyltriethoxysilane (APTES)-modified carboxymethyl chitosan (CMC) named Fe-ACMC was synthesized by a one-step method at room temperature and pressure. The surface morphology and chemical structure of Fe-ACMC were characterized by SEM-EDS, XRD, BET, FT-IR, XPS, and ζ-potential. In batch adsorption, the optimum pH for arsenate [As(V)] adsorption onto Fe-ACMC was 3-9 with removal efficiency > 99%. The adsorption of As(V) could reach equilibrium within 25 min and the maximum adsorption capacity was 84.18 mg g-1. The pseudo-second-order model fitted well the kinetic data (R2 = 0.995), while the Freundlich model well described the adsorption isotherm of As(V) on Fe-ACMC (R2 = 0.979). The co-existing anions (NO3-, CO32-, and SO42-) exhibited a slight impact on the As(V) adsorption efficiency, whereas PO43- inhibited As(V) adsorption on Fe-ACMC. The real applicability of Fe-ACMC was achieved to remove ca. 10.0 mg L-1 of As(V) from natural waters to below 0.05 mg L-1. The regeneration and reuse of Fe-ACMC for As(V) adsorption were achieved by adding 0.2 mol L-1 HCl. The main adsorption mechanism of As(V) on Fe-ACMC was attributed to electrostatic attraction and inner-sphere complexation between -NH2···Fe3+ and As(V). In fixed-bed column adsorption, the Thomas model was the most suitable model to elucidate the dynamic adsorption behavior of As(V). The loading capacity of the Fe-ACMC packed column for As(V) was 47.04 mg g-1 at pH 7 with an initial concentration of 60 mg L-1, flow rate of 3 mL min-1, and bed height of 0.6 cm.

The effect of synthesis conditions on the in situ grown MIL-100(Fe)-chitosan beads: Interplay between structural properties and arsenic adsorption

Efficient sequestration of arsenic from drinking water is a global need. Herein we report eco-friendly porous hybrid adsorbent beads for removal of arsenic, through in situ synthesis of MIL-100(Fe) in the chitosan solvogel. To understand the structural vs. performance correlation, series of hybrid adsorbents were synthesized by modulating synthesis conditions like temperature, crystallization time, and concentration. Adsorbents were investigated using PXRD, FT-IR, SEM, and ICP-OES. Intriguing correlation between crystallinity and adsorption performance was observed as low and high crystalline MIL-100(Fe)-chitosan (ChitFe5 and ChitFe7, respectively) exhibited exceptional adsorption towards As5+ by removing it from water with 99% efficiency, whereas for As3+ species removal of about 85% was afforded. Adsorption isotherms indicated that increase in crystallinity (ChitFe5 -> ChitFe7), adsorption capacities of As5+ and As3+ increased from 23.2 to 64.5, and from 28.1 to 35.3 mg/g, respectively. Selectivity tests of the adsorbents towards As5+ and As3+ over competitive anions in the equimolar competitive systems having nitrates, sulfates, and carbonates demonstrated that the performance of the absorbents was fully maintained, relative to the control system. Through this study a highly selective and efficient adsorbent for arsenic species is designed and a clear insight into the structural tuning and its effect on adsorption performance is provided.

A review on versatile applications of biomaterial/polycationic chitosan: An insight into the structure-property relationship

Chitosan is a versatile and generous biopolymer obtained by alkaline deacetylation of naturally occurring chitin, the second most abundant biopolymer after cellulose. The excellent physicochemical properties of polycationic chitosan are attributed to the presence of varied functional groups such as amino, hydroxyl, and acetamido groups enabling researchers to tailor the structure and properties of chitosan by different methods such as crosslinking, grafting, copolymerization, composites, and molecular imprinting techniques. The prepared derivatives have diverse applications in the food industry, water treatment, cosmetics, pharmaceuticals, agriculture, textiles, and biomedical applications. In this review, numerous applications of chitosan and its derivatives in various fields have been discussed in detail with an insight into their structure-property relationship. This review article concludes and explains the chitosan's biocompatibility and efficiency that has been done so far with future usage and applications as well. Moreover, the possible mechanism of chitosan's activity towards several emerging fields such as energy storage, biodegradable packaging, photocatalysis, biorefinery, and environmental bioremediation are also discussed. Overall, this comprehensive review discusses the science and complete information behind chitosan's wonder function to improve our understanding which is much needful as well as will pave the way towards a sustainable future.

Immobilizing arsenic in soil via amine metal complex: a case study using iron-ethylenediamine

Fe-based nanomaterials have been extensively investigated for their application in mitigating arsenic (As) pollution in groundwater, sediment, and soils. Here, an iron-ethylenediamine (Fe-EDA) complex was synthesized and characterized using Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy before its use as an amendment to ameliorate As-polluted soils. Column leaching tests at three Fe-EDA application rates (1%, 3%, and 5%) were conducted, and their results were compared with those acquired after using nano zerovalent iron (nZVI) and Fe₃O₄, to assess their efficiency to amend As-contaminated paddy soils. After leaching, stabilization efficiency and soil chemical characteristics were determined. Additionally, As fractions were measured using inductively coupled plasma-mass spectroscopy by employing a sequential extraction procedure to evaluate the performance of the treatments and understand the underlying their mechanisms. Compared with the control treatment, the Fe-EDA treatment reduced As release by more than 35.33% in the 2nd leaching cycle, whereas nZVI and Fe₃O₄ decreased the As release by 11.84% and 24.60%, respectively. Moreover, the optimal addition of the Fe-EDA chelate was 5%, which stabilized more than 50% As in the soil from the 7th to 11th leaching cycles. After sequential extraction, the Fe-Mn oxide binding fraction, which was originally 12.65%, increased to 21.5%, 18.23%, and 21.71% after the application of nZVI, Fe₃O₄, and Fe-EDA amendments, respectively. Furthermore, our treatments promoted the binding of the As fraction with crystalline Fe (III) (oxyhydr)oxide (F3); however, other fractions did not increase considerably, suggesting that the Fe-EDA complex could effectively stabilize As through electrostatic attraction between the arsenate anion and EDA, as well as As-O-Fe bond formation via a coordinating reaction. Overall, Fe-EDA was found to be a potent amendment for mitigating As-polluted soil.

As(III) removal by a recyclable granular adsorbent through dopping Fe-Mn binary oxides into graphene oxide chitosan

Graphene oxide chitosan composite (GOCS) is recognized as an environmentally friendly composite adsorbent because of its stability and abundant functional groups to adsorb heavy metals, and Fe-Mn binary oxides (FMBO) have attracted increasing interest due to their high removal capacity of As(III). However, GOCS is often inefficient for heavy metal adsorption and FMBO suffers poor regeneration for As(III) removal. In this study, we have proposed a method of dopping FMBO into GOCS to obtain a recyclable granular adsorbent (Fe/MnGOCS) for achieving As(III) removal from aqueous solutions. Characterization of BET, SEM-EDS, XRD, FTIR, and XPS are carried out to confirm the formation of Fe/MnGOCS and As(III) removal mechanism. Batch experiments are conducted to investigate the effects of operational factors (pH, dosage, coexisting ions, etc.), as well as kinetic, isothermal, and thermodynamic processes. Results show that the removal efficiency (R_e) of As(III) by Fe/MnGOCS is about 96 %, which is much higher than those of FeGOCS (66 %), MnGOCS (42 %), and GOCS (8 %), and it increases slightly with the increasing molar ratio of Mn and Fe. This is because amorphous Fe (hydro)oxides (mainly in the form of ferrihydrite) complexation with As(III) is the major mechanism to remove As(III) from aqueous solutions, and it is accompanied by As(III) oxidation mediated by Mn oxides and the complexation of As(III) with oxygen-containing functional groups of GOCS. Charge interaction plays a weaker role in As(III) adsorption, therefore R_e is persistently high over a wide range of pH values of 3-10. But the coexisting PO₄^3- can greatly decrease R_e by 24.11 %. As(III) adsorption on Fe/MnGOCS is endothermic and its kinetic process is controlled by pseudo-second-order with a determination coefficient of 0.95. Fitted by the Langmuir isotherm, the maximum adsorption capacity is 108.89 mg/g at 25 °C. After four times regeneration, there is only a slight decrease of <10 % for the R_e value. Column adsorption experiments show that Fe/MnGOCS can effectively reduce As(III) concentration from 10 mg/L to <10 μg/L. This study provides new insights into binary polymer composite modified by binary metal oxides to efficiently remove heavy metals from aquatic environments.

Green synthesis of chitosan/erythritol/graphene oxide composites for simultaneous removal of some toxic species from simulated solution

In this study, chitosan (Ch) is adapted via green methodology including sonication induced crosslinking with different weight ratios of erythritol (Er) from (Ch-Er)1 to (Ch-Er)4. The products were casted in the form of thin films. The chemical modification was proved via FTIR spectroscopy. Then, the modified products were verified via an atomic force microscopy (AFM) investigation for their topography and surface properties. The data revealed that the optimized sample was (Ch-Er)3. This sample was further modified by different weight ratios of graphene oxide 0.1, 0.2, 0.4, and 0.8 wt./wt. (symbolized as (Ch-Er)3GO1, (Ch-Er)3GO2, (Ch-Er)3GO4, and (Ch-Er)3GO8 respectively). The prepared samples were investigated by different analytical tools. Then, the adjusted sample (Ch-Er)3GO2 was irradiated by electron beam (e-beam) at 10 and 20 kGy of irradiation doses to give samples (Ch-Er)3GO2R10 and (Ch-Er)3GO2R20, respectively. The AFM data of the irradiated samples showed that the pore size decreases, and surface roughness increases at higher energy e-beam due to the formation of more crosslinking points. The optimum samples of the prepared formulations were tested as sorbent materials for simultaneous elimination of methylene blue (MB) dye and mercury cation (Hg2+) from simulated solutions. The maximum removal of both MB dye and Hg2+ cation was achieved by (Ch-Er)3GO2R10 (186.23 mg g-1 and 205 mg g-1) respectively.

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

This work aims at exploring a novel environment-friendly nanomaterial based on natural clay minerals for arsenic removal in aqueous samples. Halloysite nanotubes (HNTs) were selected as the substrate with Mn oxides loaded on the surface to enhance its arsenic adsorption ability and then grafted onto the SiO₂-coated Fe₃O₄ microsphere to get a just enough magnetic performance facilitating the material's post-treatment. The prepared composite (Fe₃O₄@SiO₂@Mn-HNTs) was extensively characterized by various instruments including Fourier transform infrared spectroscope (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TG), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscope (XPS), and X-ray diffraction (XRD). Batch experiments were carried out to get the optimum test conditions for arsenic adsorption by the composite, including pH, loading amount of Mn oxides, adsorbent dosage, and the co-existing ions. The adsorption of As^III and As^V on Fe₃O₄@SiO₂@Mn-HNTs were both well fitted with the pseudo-second-order kinetic model as well as the Langmuir adsorption isotherm model revealing the chemisorption between arsenic and Fe₃O₄@SiO₂@Mn-HNTs. The adsorption process of As^III and As^V were both endothermic and spontaneous displayed by the thermodynamic study. The capacities of the prepared composite are 3.28 mg g^-1 for As^III and 3.52 mg g^-1 for As^V, respectively, which are comparable or better than those of many reported materials in the references. Toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) tests were carried out to access the secondary environmental risk of the composite and showed that it was quite environmentally stable and can be safely disposed. The composite was successfully applied in environmental water samples indicating its great potential applicability in future.

A comparative study on Fe(III)-chitosan and Fe(III)-chitosan-CTAB composites for As(V) removal from water: preparation, characterization and reaction mechanism

Fe(III)-chitosan and Fe(III)-chitosan-CTAB composites were prepared using an ionotropic gelation method. Various techniques were used to analyze the morphology, structure, and property of the adsorbents, including SEM, EDS, FT-IR, XPS, and zeta potential. Compared with Fe(III)-chitosan, Fe(III)-chitosan-CTAB was more effective for As(V) adsorption at a wide range of pH (3.0-8.0). The adsorption of As(V) onto Fe(III)-chitosan and Fe(III)-chitosan-CTAB could reach equilibrium in 20 min, and their maximum adsorption capacities were 33.85 and 31.69 mg g^‒1, respectively. The adsorption kinetics was best described by the pseudo-second-order model (R² = 0.998 and 0.992), whereas the adsorption isotherm was fitted well by the Freundlich model (R² = 0.963 and 0.987). The presence of H₂PO₄^- significantly inhibited the adsorption of As(V) onto Fe(III)-chitosan and Fe(III)-chitosan-CTAB, and humic acid also led to a slight decrease in As(V) adsorption by Fe(III)-chitosan-CTAB. Over 94% of As(V) at the initial concentration of no more than 5 mg L^-1 was removed from real water by the two adsorbents. 1% (w/v) NaOH solution was determined to be the most suitable desorption agent. Fe(III)-chitosan and Fe(III)-chitosan-CTAB still maintained their initial adsorption capacities after five adsorption-desorption cycles. Based on different characterization results, both electrostatic attraction and surface complexation mechanisms played important roles in As(V) adsorption on Fe(III)-chitosan and Fe(III)-chitosan-CTAB.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pHPZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

Performance of novel GO-Gly/HNTs and GO-GG/HNTs nanocomposites for removal of Pb(II) from water: optimization based on the RSM-CCD model

For the first time, in this study, two novel glycogen-graphene oxide/halloysite nanotubes (GO-Gly/HNTs) and guar gum-graphene oxide/halloysite nanotubes (GO-GG/HNTs) nanocomposites were synthesized as the adsorbents for removal of Pb(II) from water, and the ionic liquid was used in the synthesis as a green solvent. According to the SEM, TEM, EDS, BET, zeta potential, FTIR, and XRD results, GO-Gly/HNTs and GO-GG/HNTs were synthesized successfully. Response surface methodology (RSM) was applied to optimize the experimental conditions. Nanocomposites followed the Langmuir equilibrium model and were best fitted to the pseudo-second-order model. According to the thermodynamic model, the adsorption process was endothermic. Due to several features, these two novel nanocomposites can be considered the proper candidate for Pb(II) removal from water and wastewater. First, these nanocomposites have good adsorption capacity for Pb(II) removal, which is 219 mg/g for GO-Gly/HNTs and 315 mg/g for GO-GG/HNTs. Moreover, nanocomposites can be recycled with proper adsorption capacity after four repeated cycles. These materials can be used to remove Pb(II) from water in the presence of other contaminants because nanocomposites have selective tendency toward Pb(II) in the presence of other pollutants such as Cd²⁺, Cu²⁺, Cr²⁺, and Co²⁺. In addition, the presence of Ca²⁺, Mg²⁺, Na⁺, and K⁺ improve Pb(II) removal. Finally, possible mechanisms for each nanocomposite were represented.

New material for arsenic (V) removal based on chitosan supported onto modified polypropylene membrane

This paper presents a new material easily synthesized and with low cost, with the possibility of remove arsenic and the potential capability for the remediate water bodies. In this work, the efficiency in removing arsenic of the chitosan, supported onto modified polypropylene membrane, was studied using an aqueous As(V) solution of 0.4 mg/L, achieving a removal efficiency of 75%, which corresponds to an adsorption capacity of 0.031 mg/g. The As(V) adsorption depends on pH and the degree of chitosan grafting on the polypropylene membrane. A pseudo-second-order equation describes the adsorption of the membrane, classifying it as a chemisorption process. The chitosan supported on the membrane was characterized by the analysis of wettability, FT-IR-ATR, SEM-EDS, XRD powder, and surface charge. The As ions coordinate to the chitosan polar groups, allowing their removal from the aqueous solution.

Arsenic removal approaches: A focus on chitosan biosorption to conserve the water sources

Globally, millions of people have no access to clean drinking water and are either striving for that or oppressed to intake polluted water. Arsenic is considered one of the most hazardous contaminants in water bodies that reaches there due to various natural and anthropogenic activities. Modified chitosan has gained much attention from researchers due to its potential for arsenic removal. This review focuses on the need and potential of chitosan-based biosorbents for arsenic removal from water systems. Chitosan is a low-cost, abundant, biodegradable biopolymer that possesses unique structural aspects and functional sites for the adsorption of contaminants like arsenic species from contaminated water. The chitosan-based biosorbents had also been modified using various techniques to enhance their arsenic removal efficiencies. This article reviews various forms of chitosan and parameters involved in chitosan modification which eventually affect the arsenic removal efficiency of the resultant sorbents. The literature revealed that the modified chitosan-based sorbents could express higher adsorption efficiency compared to those prepared from native chitosan. The sustainability of the chitosan-based sorbents has also been considered in terms of reusability. Finally, some recommendations have been underlined for further improvements in this domain.

Flocculation of combined contaminants of dye and heavy metal by nano-chitosan flocculants

In this study, two multifunctional nano-chitosan flocculants (CPAM-NCS1 and CPAM-NCS2) were made through the graft modification of cationic monomer and carboxymethylchitosan (CMCTS) to remove combined contaminants. The effects of various factors (pH, flocculant dosage and hydraulic mixing conditions) on the flocculation performance under single and composite pollution conditions were systematically investigated, the optimal chemical oxygen demand (COD) and the chromaticity removal rates in the dye wastewater were 79.9% and 83.9% at wastewater pH 7, the fast stirring rate 300 rpm, the fast stirring time 8 min, and the dosage of CPAM-NCS1 80 mg/L, respectively. The optimal removal rates of Cu (II) obtained by CPAM-NCS1 and CPAM-NCS2 at were 80.3% and 75.2% at 60 mg/L and the wastewater pH 7, respectively. The optimal removal rates of Cu (II) and disperse orange were 85.3% and 89.4%, respectively, in a composite pollutant system in which Cu (II) and disperse orange coexisted when the pH of the composite system was 9 and the dosage of CPAM -NCS1 was 60 mg/L. This study proved that nanoflocculants made by modifying CMCTS with different structures can demonstrate ideal flocculation removal performance for dye and heavy metal wastewaters.

Synthesis of Inorganic Compounds in the Matrix of Polysaccharide Chitosan

Data related to the fabrication of hybrid materials based on the polysaccharide chitosan were systematized and reviewed. The possibility of using chitosan as a “host” matrix for in situ synthesis of inorganic compounds for the preparation of various types of composite materials were investigated. Coprecipitation of metal oxides/hydroxides (Fe, Ni, Al, Zr, Cu and Mn) with chitosan was carried out through the alkalinization of solutions containing metal salts and chitosan, with the addition of ammonia or alkali solutions, homogeneous hydrolysis of urea, or electrophoretic deposition on the cathode. The synthesis of transition metal ferrocyanides and hydroxyapatite was achieved from precursor salts in a chitosan solution with simultaneous alkalinization. The mechanism of composite formation during the coprecipitation process of inorganic compounds with chitosan is discussed. Composite materials are of interest as sorbents, coatings, sensors, and precursors for the production of ceramic and electrode materials.

Fabrication of zirconium (IV)-loaded chitosan/Fe3O4/graphene oxide for efficient removal of alizarin red from aqueous solution

Zirconium(IV)-loaded chitosan/Fe₃O₄/graphene oxide (Zr-CMGO) was fabricated and applied to remove alizarin red (AR) from aqueous solution. Characterizations of Zr-CMGO were performed using several techniques. The effects of initial AR pH, coexisted NaCl, contact time and AR concentration were systematically investigated in batch mode. The increased pH had a negative effect on AR adsorption while there was little impact with salinity. Adsorption capacity toward AR reached up to 231 mg/g at 313 K. The kinetic and isotherm analyses indicated that pseudo-second-order kinetic model and Freundlich model could predicted the uptake of AR. In addition, the mechanism of AR adsorption could be mainly complexation, electrostatic force, etc. There is antibacterial activity from test about Zr-CMGO. Furthermore, the two-stage design could be applied for the theoretical support. Based on all results, Zr-CMGO is a novel and selective adsorbent for practical applications.

Novel chitosan-based flocculants for chromium and nickle removal in wastewater via integrated chelation and flocculation

Carboxylated chitosan (CPCTS) is used as substrates in the design and synthesis of CPCTS-based flocculants through UV-initiated polymerization techniques. The synthesized flocculants are applied to remove Cr and Ni ions from chromic acid lotion and electroplating wastewater through two-stage flocculation. This study investigates the effect of flocculant dosage, pH, reaction time, and stirring speed on the removal efficiency of Cr and Ni ions. Results indicated that the total Cr removal ratios by CPCTS-graft-polyacrylamide-co-sodium xanthate (CAC) and CPCTS-graft-poly [acrylamide-2-Acrylamido-2-methylpropane sulfonic acid] (CPCTS-g-P(AM-AMPS)) are 94.7% and 94.6%, respectively. The total Ni removal efficiencies by CAC and CPCTS-g-P(AM-AMPS) are 99.3% and 99.4%, respectively. The two-stage flocculation with CPCTS-based flocculants could reduce the total concentrations of Cr and Ni to 1.0 mg/L and 0.5 mg/L, respectively. The relationship of removal capacity and structural properties between the flocculants with different functional groups is established through Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, and X-ray diffraction. The micro-interfacial behavior between the colloidal particles and the solution during the integrated chelation-flocculation are elucidated. Thus, CPCTS-based flocculants could be a potential material for the removal of high amounts of Cr and Ni ions in industrial wastewater.

Application of modified electrospun nanofiber membranes with α-Fe2O3 nanoparticles in arsenate removal from aqueous media

In the present study, electrospun nanofiber membranes (ENMs) of polyacrylonitrile (PAN) were modified by dispersing α-Fe₂O₃ nanoparticles, synthesized using a thermal solvent process, in a PAN solution. The morphology and physiochemical properties of the prepared ENMs and the α-Fe₂O₃ were characterized using FESEM, EDX, BET, XRD, FTIR, porosity, and contact angle measurement. XPS was used to investigate the interaction of ENM with arsenate (As(V)) during the adsorption. Moreover, the effect of pH, the equilibrium isotherm, and the kinetics were investigated in batch experiments. The Langmuir isotherm best correlated the experimental results, indicating monolayer adsorption on ENMs, and the kinetics was best fitted, R² > 0.99, by the pseudo-second-order model. In addition, the effects of certain conditions on the filtration performance were examined, such as feed concentration and transmembrane pressure (TMP). By passing sodium hydroxide (0.1 M) for 20 min, the membrane was regenerated. The increase in TMP, along with the presence of co-ions including chloride, nitrate, and sulfate, had negative impacts on the removal of As(V). The results show that the modified ENMs with α-Fe₂O₃ nanoparticles are applicable for As(V) ion removal and possibly for eliminating other heavy metals from aqueous media.

Insights into doxycycline adsorption onto graphene nanosheet: a combined quantum mechanics, thermodynamics, and kinetic study

Recently, pharmaceutically active compounds including antibiotics have been detected in drinking water at very low levels, mostly nanogram/liter concentrations, proposing that these materials were unaffected by water treatment processes. Adsorption processes were suggested to play a significant role in the removal of antibiotics. In this study, the adsorption behavior of doxycycline (DC) in aqueous solution was evaluated. The four factors influencing the adsorption of DC onto graphene nanosheet (GNS) were studied. The results showed that initial pH ∼ 6 to 7 and contact time ∼ 200 min are optimum. The monolayer adsorption capacity was reduced with the increasing temperature from 25 to 45 °C. Nonlinear regressions were carried out to define the best fit model for every system. Among various models, the Hill isotherm model represented the equilibrium adsorption data of antibiotics while the kinetic data were well fitted by the Elovich kinetic model. The maximum adsorption capacity (q _max) was 110 mg.g^-1, obtained from the Hill equation. Semiempirical molecular orbital theory was used to investigate the molecular interaction of the adsorption system. The experiments and semiempirical computation have systematically demonstrated that DC could be adsorbed onto GNS by π- π and electrostatic interactions. It was shown that there is a good compromise with the experimental results. Graphical abstract Insights into doxycycline adsorption onto graphene nanosheet: quantum mechanics, thermodynamics, and kinetic study.

A novel biocoagulant agent from mushroom chitosan as water and wastewater therapy

A new commercial cationic polyelectrolyte chitosan (CM), obtained from the waste of mushroom production, was examined using models of water and wastewater namely kaolin and palm oil mill effluent (pome). As it is biocompatible, widely available, and economically feasible, chitosan mushroom has high potential to be a suitable replacement for alum. Also, it can be a promising alternative to chitosan obtained traditionally from Crustaceans due to its higher zeta potential and homogeneity based on the raw material required for its production. A wide range of coagulant dose (5-60 mg l^-1) and wastewater pH (2-12) were taken into account to find the optimal conditions of coagulation. The optimal doses are 10 and 20 mg l^-1 at best pH (11 and 3) when treated with kaolin and palm oil mill effluent, respectively, while 1200 mg l^-1 of alum was not enough to reach the efficiency of chitosan mushroom. On the other hand, the optimum dose of chitosan mushroom (20 mg l^-1) at pH 3 of pome produced (75, 73, and 98%) removal of chemical oxygen demand (COD), biological oxygen demand (BOD), and total suspended solids (TSS), respectively. The significant potential of chitosan mushroom was proved by zeta potential measurement. Indeed, it possesses the highest zeta potential (+70 mV) as compared to the traditional chitosan produced from crustaceans. In short, chitosan mushroom as a biocoagulant is eco-friendly and it enhances water quality that meets the requirements of environmental conservatives.

Cu(II) adsorption from copper mine water by chitosan films and the matrix effects

Adsorption of copper ions onto chitosan films was studied, and the matrix effect was evaluated using a synthetic solution and a real effluent from closed copper mine. Chitosan films were prepared by casting technique and characterized. The adsorption study was carried out by equilibrium isotherms, thermodynamics, and kinetics. The thermodynamic parameters indicated that the copper adsorption onto chitosan film was favorable, spontaneous, and exothermic, suggesting an increased randomness at the solid/solution interface. The matrix effect was evaluated in kinetic assays, where a synthetic solution and a real system were carried out at different stirring rates. The highest values of adsorption capacity reached in all stirring rates were about 20% lower in the real effluent, and this reduction in the competitiveness was due to the presence of other ions in the matrix of the real effluent. The maximum adsorption capacity of copper ions onto chitosan films for the synthetic solution was of 450 mg g^-1, and the removal percentage was in the range from 78 to 96%, and these values for the real effluent were of 360 mg g^-1 and removal ranging from 62 to 76%. The mapping done of ions present in the water adsorbed of the mine in the films showed that the same was homogeneously distributed in the films' surfaces.

Chitin Adsorbents for Toxic Metals: A Review

Wastewater treatment is still a critical issue all over the world. Among examined methods for the decontamination of wastewaters, adsorption is a promising, cheap, environmentally friendly and efficient procedure. There are various types of adsorbents that have been used to remove different pollutants such as agricultural waste, compost, nanomaterials, algae, etc., Chitin (poly-β-(1,4)-N-acetyl-d-glucosamine) is the second most abundant natural biopolymer and it has attracted scientific attention as an inexpensive adsorbent for toxic metals. This review article provides information about the use of chitin as an adsorbent. A list of chitin adsorbents with maximum adsorption capacity and the best isotherm and kinetic fitting models are provided. Moreover, thermodynamic studies, regeneration studies, the mechanism of adsorption and the experimental conditions are also discussed in depth.