Enrichment and oral bioaccessibility of selected trace elements in fly ash-derived magnetic components

Enhanced Gastric/Lung Arsenic Bioaccessibility from Lignite Fly Ashes: Comparing Bioaccessibility Rates with Multiple Environmental Matrices

Inorganic arsenic (As), a carcinogenic element to humans, is among the most dangerous and flammable substances that coal-burning plants could release. When coal is burned, large portions of arsenic are captured on fly-ash (FA) particles, but it could also contribute significantly to stack emissions of fine fly-ash particles. The aim of this study was to evaluate the oral and respiratory bioaccessibility of arsenic in lignite fly-ash (LFA) samples, and their contribution to total As exposure. Arsenic bioaccessibility fractions via ingestion and inhalation showed significant differences, suggesting the presence of highly soluble As-bearing phases in the studied LFA samples. The bioaccessible As fractions (BAF%) in the simulated gastric fluids (UBM protocol, ISO 17924:2018) showed a range of 45-73%, while the pulmonary bioaccessibility rates in the simulated lung fluid (artificial lung fluid (ALF)) exhibited significantly enhanced levels ranging from 86% to 95%. The obtained arsenic bioaccessibility rates were compared with previous data for multiple environmental matrices such as soil and dust-related materials, revealing that LFA exhibited significantly higher bioaccessibility (%) for the inhalation pathway.

Endogenous doesn't always mean innocuous: a scoping review of iron toxicity by inhalation

Ambient air pollution is a leading risk factor for the global burden of disease. One possible pathway of particulate matter (PM)-induced toxicity is through iron (Fe), the most abundant metal in the atmosphere. The aim of the review was to consider the complexity of Fe-mediated toxicity following inhalation exposure focusing on the chemical and surface reactivity of Fe as a transition metal and possible pathways of toxicity via reactive oxygen species (ROS) generation as well as considerations of size, morphology, and source of PM. A broad term search of 4 databases identified 2189 journal articles and reports examining exposure to Fe via inhalation in the past 10 years. These were sequentially analyzed by title, abstract and full-text to identify 87 articles publishing results on the toxicity of Fe-containing PM by inhalation or instillation to the respiratory system. The remaining 87 papers were examined to summarize research dealing with in vitro, in vivo and epidemiological studies involving PM containing Fe or iron oxide following inhalation or instillation. The major findings from these investigations are summarized and tabulated. Epidemiological studies showed that exposure to Fe oxide is correlated with an increased incidence of cancer, cardiovascular diseases, and several respiratory diseases. Iron PM was found to induce inflammatory effects in vitro and in vivo and to translocate to remote locations including the brain following inhalation. A potential pathway for the PM-containing Fe-mediated toxicity by inhalation is via the generation of ROS which leads to lipid peroxidation and DNA and protein oxidation. Our recommendations include an expansion of epidemiological, in vivo and in vitro studies, integrating research improvements outlined in this review, such as the method of particle preparation, cell line type, and animal model, to enhance our understanding of the complex biological interactions of these particles.

In vitro assessment of oral and respiratory bioaccesibility of trace elements of environmental concern in Greek fly ashes: Assessing health risk via ingestion and inhalation

Fly ash engender significant environmental and human health problems due to enhanced contents of potentially harmful trace elements (TrElems). This study aims to evaluate human exposure to TrElems via a combined ingestion (i.e., oral bioaccessibility) and inhalation (i.e., respiratory bioaccessibility) pathway. Five fly ash samples were collected from power plants operating in the main lignite basins of Greece, while the ingestible (<250 μm) and inhalable (<10 μm) particle size fractions were utilized. The Unified Bioaccessibility Method (UBM) was utilized to assess the oral bioaccessibility, while the respiratory bioaccessible fractions were extracted using the Artificial Lysosomal Fluid (ALF). All studied FAs exhibited significantly higher contents in Ba, Cr, Ni, V and Zn. Cadmium was presented relative enriched in the finer size fraction (<10 μm), while Ba, Co, Cr, Cu, Mn, Ni and V were depleted. The UBM-extractable concentrations fluctuated greatly among the studied FAs, while notably lower bioaccessible contents were recorded in the gastrointestinal phase. On the other hand, ALF-extractable concentrations were surprisingly higher than the corresponding UBM-extractable ones in the gastric phase. The oral bioaccessibility of the studied TrElems ranged from 12.5 to 100%, while respiratory bioaccessibility presented high values exceeding 45% on average. A significant effect of fly ash type on human bioaccessibility was revealed. Thus, high-Ca FAs exhibited significantly higher bioaccessibility of the studied TrElems via ingestion, while a relatively higher bioaccessibility via inhalation was observed for high-Si FAs. Regarding non-carcinogenic health risk via ingestion and inhalation, Cr and Co exhibited the highest HQ_ing and HQ_inh values, however there were significantly lower than safe level (HQ < 1). On the contrary, Cr was the dominant contributor to carcinogenic risk with CR values being well above threshold or even tolerable risk levels.

Separation of Cenospheres from Lignite Fly Ash Using Acetone–Water Mixture

This work reports on the separation of cenospheres from lignite fly ash through a wet separation process-the sink-float method. A better quality of cenospheres could be achieved through a physical–chemical approach using an acetone–water mixture as a medium. This work aimed to elucidate the correlation between the structure, morphology, and composition and medium fraction variables, with data for the freshly prepared and the reused mixtures presented for comparison. The work covers a study of the macrocomponent composition of an Fe2O3–SiO2–Al2O3 system, highlighting the pair dependences of SiO2–Al2O3, Al2O3–Fe2O3, and SiO2/Al2O3–Al2O3 and revealing an interesting result in terms of geochemical characteristics categorizing the collected cenosphere fractions separated from high-calcium class C fly ash produced from a lignite coal power plant in Thailand (as magnetic cenospheres). The CaO and SO3 contents increased monotonically with increased water content, particularly for the CaO composition profile, which was found to be similar to the increased carbonate concentration measured from the mixtures after use. The physicochemical properties in terms of the self-association ability of the acetone–water mixing phase is believed to have played an important role in determining the intermolecular interactions and reactivity of ions in the liquid phase, consequently affecting the separation efficiency, recovery yield, and quality of cenospheres.

Composition and Morphology Characteristics of Magnetic Fractions of Coal Fly Ash Wastes Processed in High-Temperature Exposure in Thermal Power Plants

Coal-fired power stations are one of the primary sources of power generation in the world. This will produce considerable amounts of fly ash from these power stations each year. To highlight the potential environmental hazards of these materials, this study is carried out to evaluate the characterization of fly ashes produced in thermal power plants in northern Vietnam. Fly ash was firstly fractionated according to size, and the fractions were characterized. Then, each of these fractions was analyzed with regard to their mineralogical features, morphological and physicochemical properties. The analytical results indicate a striking difference in terms of the characteristics of particles. It was found that magnetic fractions are composed of magnetite hematite and, to a lower rate, mullite, and quartz. Chemical analyses indicate that the non-magnetic components mainly consist of quartz and mullite as their primary mineral phases. As the main conclusion of this research, it is found that the magnetic and non-magnetic components differ in terms of shape, carbon content and mineralogical composition. In addition, it was found that magnetic components can be characterized as more spheroidal components compared to non-magnetic ones. This comprehensive characterization not only offers a certain guideline regarding the uses of different ash fractions but it will also provide valuable information on this common combustion process.

Preparation and Evaluation of Coal Fly Ash/Chitosan Composites as Magnetic Supports for Highly Efficient Cellulase Immobilization and Cellulose Bioconversion

Two magnetic supports with different morphologies and particle sizes were designed and prepared for cellulase immobilization based on chitosan and industrial by-product magnetic coal fly ash (MCFA). One was prepared by coating chitosan onto spherical MCFA particles to form non-porous MCFA@chitosan gel microcomposites (Support I) with a size of several micrometers, and the other was prepared using the suspension method to form porous MCFA/chitosan gel beads (Support II) with a size of several hundred micrometers. Cellulase was covalent binding to the support by glutaraldehyde activation method. The morphology, structure and magnetic property of immobilized cellulase were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and a vibrating-sample magnetometer. The cellulase loading on Support I was 85.8 mg/g with a relatlvely high activity recovery of 76.6%, but the immobilized cellulase exhibited low thermal stability. The cellulase loading on Support II was 76.8 mg/g with a relative low activity recovery of 51.9%, but the immobilized cellulase showed high thermal stability. Cellulase immobilized on Support I had a glucose productivity of 219.8 mg glucose/g CMC and remained 69.9% of the original after 10 cycles; whereas the glucose productivity was 246.4 mg glucose/g CMC and kept 75.5% of its initial value after 10 repeated uses for Support II immobilized cellulase. The results indicate that the two supports can be used as cheap and effective supports to immobilize enzymes.