Novel aerosol analysis approach for characterization of nanoparticulate matter in snow

Advancing the science of dynamic airborne nanosized particles using Nano-DIHM

In situ and real-time characterization of aerosols is vital to several fundamental and applied research domains including atmospheric chemistry, air quality monitoring, or climate change studies. To date, digital holographic microscopy is commonly used to characterize dynamic nanosized particles, but optical traps are required. In this study, a novel integrated digital in-line holographic microscope coupled with a flow tube (Nano-DIHM) is demonstrated to characterize particle phase, shape, morphology, 4D dynamic trajectories, and 3D dimensions of airborne particles ranging from the nanoscale to the microscale. We demonstrate the application of Nano-DIHM for nanosized particles (≤200 nm) in dynamic systems without optical traps. The Nano-DIHM allows observation of moving particles in 3D space and simultaneous measurement of each particle's three dimensions. As a proof of concept, we report the real-time observation of 100 nm and 200 nm particles, i.e. polystyrene latex spheres and the mixture of metal oxide nanoparticles, in air and aqueous/solid/heterogeneous phases in stationary and dynamic modes. Our observations are validated by high-resolution scanning/transmission electron microscopy and aerosol sizers. The complete automation of software (Octopus/Stingray) with Nano-DIHM permits the reconstruction of thousands of holograms within an hour with 62.5 millisecond time resolution for each hologram, allowing to explore the complex physical and chemical processes of aerosols.

Air Pollution of Nature Reserves near Cities in Russia

Today, protected natural areas cover about 15% of the Earth's land. These areas by definition are supposed to be free of pollution; they nevertheless suffer from the effects of aerial transport of anthropogenic polluting substances. In this study, we evaluated the impact of settlements on protected natural areas to determine the optimal distance beyond which the anthropogenic influence would be minimal. For this purpose, we analyzed the particle size distribution and the content of metals in fresh snow samples collected in the Bastak Nature Reserve and the neighboring Birobidzhan city (Russian Federation). Both sites contained comparable proportions of PM₁₀ and contents of heavy metals, which points to the transportation of air pollutants from the city to the reserve. The results of the analysis were summarized and compared with the available data on other nature reserves and nearby populated localities. Based on the research data, pollutant emissions should be decreased for cities that are closer than 50 km to nature reserves. Moreover, authorities should take into consideration atmospheric factors and distance to the nearest settlement when establishing new protected natural areas.

Development of methodology to generate, measure, and characterize the chemical composition of oxidized mercury nanoparticles

The phase of oxidized mercury is critical in the fate, transformation, and bioavailability of mercury species in Earth's ecosystem. There is now evidence that what is measured as gaseous oxidized mercury (GOM) is not only gaseous but also consists of airborne nanoparticles with distinct physicochemical properties. Herein, we present the development of the first method for the consistent and reproducible generation of oxidized mercury nano- and sub-micron particles (~ 5 to 400 nm). Oxidized mercury nanoparticles are generated using two methods, vapor-phase condensation and aqueous nebulization, for three proxies: mercury(II) bromide (HgBr₂), mercury(II) chloride (HgCl₂), and mercury(II) oxide (HgO). These aerosols are characterized using scanning mobility and optical sizing, high-resolution scanning transmission electron microscopy (STEM), and nano/microparticle interface coupled to soft ionization mercury mass spectrometric techniques. Synthetic nanoparticle stability was studied in aqueous media, and using a microcosm at ambient tropospheric conditions of ~ 740 Torr pressure, room temperature, and at relative humidity of approximately 20%. Analysis of microcosm airborne nanoparticles confirmed that generated synthetic mercury nanoparticles retain their physical properties once in air. KCl-coated denuders, which are currently used globally to measure gaseous mercury compounds, were exposed to generated oxidized mercury nanoparticles. The degree of synthetic mercury nanoparticle capture by KCl-coated denuders and particulate filters was assessed. A significant portion of nanoparticulate and sub-micron particulate mercury was trapped on the KCl-coated denuder and measured as GOM. Finally, we demonstrate the applicability of soft ionization mercury mass spectrometry to the measurement of mercury species present in the gaseous and solid phase. We recommend coupling of this technique with existing methodology for a more accurate representation of mercury biogeochemistry cycling. Graphical Abstract.

Athabasca oil sands region snow contains efficient micron and nano-sized ice nucleating particles

The Athabasca Oil Sands Region (AOSR) in Alberta, Canada, is an important source of atmospheric pollutants, such as aerosols, that have repercussions on both the climate and human health. We show that the mean freezing temperature of snow-borne particles from AOSR was elevated (-7.1 ± 1.8 °C), higher than mineral dust which freezes at ∼ -15 °C and is recognized as one of the most relevant ice nuclei globally. Ice nucleation of nanosized snow samples indicated an elevated freezing ability (-11.6 ± 2.0 °C), which was statistically much higher than snow-borne particles from downtown Montreal. AOSR snow had a higher concentration (∼2 orders of magnitude) of >100 nm particles than Montreal. Triple quadrupole ICP-(QQQ)-MS/MS analysis of AOSR and Montreal snow demonstrated that most concentrations of metals, including those identified as emerging nanoparticulate contaminants, were much more elevated in AOSR in contrast to Montreal: 34.1, 34.1, 16.6, 5.8, 0.3, 0.1, and 9.4 mg/m³ for Cr, Ni, Cu, As, Se, Cd, and Pb respectively, in AOSR and 1.3, 0.3, 2.0, <0.03, 0.1, 0.03, and 1.2 mg/m³ in Montreal snow. High-resolution Scanning Transmission Electron Microscopy/Energy-dispersive X-ray Spectroscopy (STEM-EDS) imaging provided evidence for various anthropogenic nano-materials, including carbon nanotubes resembling structures, in AOSR snow up to 7-25 km away from major oil sands upgrading facilities. In summary, particles characterized as coming from oil sands are more efficient at ice nucleation. We discuss the potential impacts of AOSR emissions on atmospheric and microphysical processes (ice nucleation and precipitation) both locally and regionally.

The Existence of Airborne Mercury Nanoparticles

Mercury is an important global toxic contaminant of concern that causes cognitive and neuromuscular damage in humans. It is ubiquitous in the environment and can travel in the air, in water, or adsorb to soils, snow, ice and sediment. Two significant factors that influence the fate of atmospheric mercury, its introduction to aquatic and terrestrial environments, and its bioaccumulation and biomagnification in biotic systems are the chemical species or forms that mercury exists as (elemental, oxidized or organic) and its physical phase (solid, liquid/aqueous, or gaseous). In this work, we show that previously unknown mercury-containing nanoparticles exist in the air using high-resolution scanning transmission electron microscopy imaging (HR-STEM). Deploying an urban-air field campaign near a mercury point source, we provide further evidence for mercury nanoparticles and determine the extent to which these particles contain two long suspected forms of oxidized mercury (mercuric bromide and mercuric chloride) using mercury mass spectrometry (Hg-MS). Using optical particle sizers, we also conclude that the conventional method of measuring gaseous oxidized mercury worldwide can trap up to 95% of nanoparticulate mercuric halides leading to erroneous measurements. Finally, we estimate airborne mercury aerosols may contribute to half of the oxidized mercury measured in wintertime Montréal urban air using Hg-MS. These emerging mercury-containing nanoparticle contaminants will influence mercury deposition, speciation and other atmospheric and aquatic biogeochemical mercury processes including the bioavailability of oxidized mercury to biota and its transformation to neurotoxic organic mercury.

Physicochemical studies of aerosols at Montreal Trudeau Airport: The importance of airborne nanoparticles containing metal contaminants

Airborne particles, specifically nanoparticles, are identified health hazards and a key research domain in air pollution and climate change. We performed a systematic airport study to characterize real-time size and number density distribution, chemical composition and morphology of the aerosols (∼10 nm-10 μm) using complementary cutting-edge and novel techniques, namely optical aerosol analyzers, triple quad ICP-MS/MS and high-resolution STEM imaging. The total number density of aerosols, predominantly composed of nanoparticles, reached a maximum of 2 × 10⁶ cm^-3 and is higher than reported values from any other international airport. We also provide evidence for a wide range of metal in aerosols, and emerging metals in nanoparticles (e.g., Zn and Ni). The geometric mean, median and 99th and 1st percentile values of observed nanoparticle number densities at the apron were 1.0 × 10⁵, 9.0 × 10⁴, 1.2 × 10⁶ and 9.3 × 10³ cm^-3, respectively. These observations were statistically higher than corresponding measurements in downtown Montreal and at major highways during rush hour. This airport is thus a hotspot for nanoparticles containing emerging contaminants. The diurnal trends in concentrations exhibit peaks during flight and rush hours, showing correlations with pollutants such as CO. The HR-TEM-EDS provided evidence for nano-sized particles produced in combustion engines. Implications of our results for air pollution and health are discussed.