Selective determination of sulfonamides from environmental water based on magnetic surface molecularly imprinting technology

Study of the Preparation and Performance of TiO2-Based Magnetic Regenerative Adsorbent

Against the backdrop of "carbon neutrality", the green treatment of dye wastewater is particularly important. Currently, the adsorption method shows strong application prospects. Therefore, selecting efficient and recyclable adsorbents is of significant importance. TiO2 is an excellent adsorbent, but its difficult recovery often leads to secondary pollution. γ-Fe2O3-modified coal-series kaolin exhibits both excellent adsorption properties and rapid separation through magnetic separation technology. By utilizing the synergistic effects of both, TiO2/-γFe2O3 coal-series kaolin, magnetic adsorbent regeneration materials were prepared using coprecipitation method and characterized. The influencing factors of this functional material on the adsorption of Congo red dye and its regeneration performance are discussed. The experimental results indicated that the specific surface area, pore volume and Ms value of this functional material are 127.5 m2/g, 0.38 cm3/g, and 13.4 emu/g, respectively. It exhibits excellent adsorption characteristics towards Congo red, with an adsorption rate reaching 96.8% within 10 min, conforming to the pseudo-second-order kinetic model, and demonstrating Langmuir IV-type monolayer adsorption. After the adsorption of Congo red, magnetic separation shows superior efficiency. Furthermore, treatment of the adsorbed composite with EDTA allows for recycling, with adsorption rates still above 91% after three cycles, indicating an excellent regeneration capability.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Poly-(MMA-IL) filter paper: A new class of paper-based analytical device for thin-film microextraction of multi-class antibiotics in environmental water samples using LC-MS/MS analysis

A paper-based polymeric ionic liquid (p-Poly-(MMA-IL)) was successfully developed by grafting the polymeric ionic liquid on the surface of commercial filter paper (FP) by using the dipping method, presenting a new cost-effective film. The newly developed p-Poly-(MMA-IL) FP was then applied as a paper-based thin-film microextraction (p-TFME) analytical device to extract 14 compounds as representative of five groups of antibiotic drugs, which were sulfonamides, tetracyclines, fluoroquinolones, penicillin and macrolides in environmental water samples. Besides, p-Poly-(MMA-IL) FP, p-Poly-(MMA) FP, and unmodified filter paper were successfully characterised by FTIR, NMR, FESEM, TGA, and XRD techniques. They underwent significant parameters optimisation, which affected the extraction efficiency. Under optimal conditions, the proposed (p-Poly-(MMA-IL) FP-TFME) device method was evaluated and applied to analyse multi-class antibiotic drugs in environmental water samples by using a liquid chromatography-mass spectrometry (LC-MS). The validation method showed that a good linearity (0.1 μg L^-1 - 500 μg L^-1) was noted (R² > 0.993, n = 3). Detection and quantification limits were within 0.05 μg L^-1 - 4.52 μg L^-1 and 0.15 μg L^-1 - 13.6 μg L^-1, respectively. The relative standard deviation (RSD) values ranged at 1.4%-12.2% (intra-day, n = 15) and 4.4%-11.0% (inter-day, n = 10). The extraction recoveries of environmental water samples ranged from 79.1% to 126.8%, with an RSD of less than 15.4% (n = 3). The newly developed paper-based polymeric ionic liquid (p-Poly-(MMA-IL) FP) for analysis of multi-class antibiotic drugs under the p-TFME analytical device procedure was successfully achieved with limited sample volume and organic solvent, fast extraction, and feasible in daily analysis. The detection concentration and relative RSD of multi-class antibiotics determined in various environmental water samples by the proposed method (n = 5) were within 0.44 μg L^-1 - 54.41 μg L^-1 and 0.69%-15.56%, respectively. These results signified the potential of the p-Poly-(MMA-IL) FP-TFME device as an efficient, sensitive and environmentally friendly approach for analysing antibiotics.

Magnetic Molecularly Imprinted Polymers for the Separation and Enrichment of Cannabidiol from Hemp Leaf Samples

Cannabidiol (CBD) has attracted immense attention due to its excellent clinical effects in the treatment of various diseases. However, rapid and accurate extraction of CBD from hemp plant concentrates remains a challenge. Thus, novel magnetic molecularly imprinted polymers (CBD-MMIPs) with specific recognizing capability for CBD were synthesized using ethylene glycol dimethacrylate as the cross-linker, CBD as the template, methacrylic acid as the functional monomer, azobisisobutyronitrile as the initiator, and Fe₃O₄ nanoparticles modified with SiO₂ as the magnetic carrier. The morphological, magnetic, and adsorption properties of obtained CBD-MMIPs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, surface area and porosity analyses, and various adsorption experiments. The results showed that the CBD-MMIPs had selective specificity and high adsorption capacity for CBD. The adsorption of CBD by CBD-MMIPs could reach equilibrium in a short time (30 min), and the maximum adsorption capacity was as high as 26.51 mg/g. The specific recognition and selectivity properties of CBD-MMIPs to CBD were significantly higher than that of other structural analogues, and the regeneration tests established that the CBD-MMIPs had good recyclability. Furthermore, the CBD-MMIPs could be successfully used as an adsorbent to the extraction of CBD from hemp leaf sample concentrates with high recovery efficiencies (93.46-97.40%).

Theoretical insights into the uptake of sulfonamides onto phospholipid bilayers: Mechanisms, interaction and toxicity evaluation

Sulfonamides (SAs) are now recognized as the main emerging environmental pollutants in aquatic environments. Although the bioaccumulation capacities of SAs have been confirmed, the pathway for the penetration of the SAs into lipid bilayer has been not fully understood. In this study, the bioaccumulation mechanism of four typical SAs onto the dipalmitoyl phosphatidylcholine (DPPC) lipid bilayer and their effects on the properties of DPPC bilayer were employed and evaluated respectively by using molecular dynamics simulations. Results show that from the viewpoint of thermodynamics, it is favorable for these SAs partitioning to DPPC bilayer. The accommodation of four SAs onto the lipid membrane needs to undergo several processes, which include the contact stage, transformation stage, and absorption stage. Besides, the sulfamethoxazole (SMX) and sulfamethazine (SMZ) show a strong preference for the DPPC phase rather than the interface region while the sulfadiazine (SDZ) and sulfametoxydiazine (SMD) have similar tendencies in the interface region and DPPC phase. Furthermore, the cytotoxicity of SAs is reflected in their ability to affect the electrostatic potential of the membrane and to reduce the thickness of phospholipid bilayers. This molecular-level study provided an insightful understanding of the toxicity and bioaccumulation of SAs.

Development of a Screening Method for Sulfamethoxazole in Environmental Water by Digital Colorimetry Using a Mobile Device

Antibiotic resistance is a major health concern of the 21st century. The misuse of antibiotics over the years has led to their increasing presence in the environment, particularly in water resources, which can exacerbate the transmission of resistance genes and facilitate the emergence of resistant microorganisms. The objective of the present work is to develop a chemosensor for screening of sulfonamides in environmental waters, targeting sulfamethoxazole as the model analyte. The methodology was based on the retention of sulfamethoxazole in disks containing polystyrene divinylbenzene sulfonated sorbent particles and reaction with p-dimethylaminocinnamaldehyde, followed by colorimetric detection using a computer-vision algorithm. Several color spaces (RGB, HSV and CIELAB) were evaluated, with the coordinate a_star, from the CIELAB color space, providing the highest sensitivity. Moreover, in order to avoid possible errors due to variations in illumination, a color palette is included in the picture of the analytical disk, and a correction using the a_star value from one of the color patches is proposed. The methodology presented recoveries of 82–101% at 0.1 µg and 0.5 µg of sulfamethoxazole (25 mL), providing a detection limit of 0.08 µg and a quantification limit of 0.26 µg. As a proof of concept, application to in-field analysis was successfully implemented.

Eco-friendly ionic liquid imprinted polymer based on a green synthesis strategy for highly selective adsorption tylosin in animal muscle samples

A novel eco-friendly molecularly imprinted polymer (MIP) was proposed as solid-phase extraction (SPE) adsorbent to selective adsorption tylosin (TYL) in animal muscle samples. The MIP was synthesized in aqueous by using 1,4-butanediyl-3,3-bis-1-vinyl imidazolium chloride and 2-acrylamide-2-methylpropanesulfonic acid as bifunctional monomer. The obtained MIP had excellent selectivity towards TYL in water, and the maximum binding capacity can reach 123.45 mg g^-1. Combined with high-performance liquid chromatography, the presented MIP can be used as SPE sorbent to recognize and detect TYL in the range of 0.008 to 0.6 mg L^-1 (R² = 0.9995). The limit of detection and limit of quantification were 0.003 mg L^-1 and 0.008 mg L^-1, and the intraday and interday precision were 1.05% and 3.36%, respectively. Under the optimal condition, the established MIP-SPE-HPLC method was successfully applied to separate and determine trace TYL in chicken, pork, and beef samples with satisfactory recoveries ranged from 94.0 to 106.3%, and the MIP-SPE cartridge can be cycled at least 20 times. This study implies a promising green MIP-SPE-HPLC method for highly selective adsorption and analysis trace TYL in complex matrices.

Synthesis and characterization of magnetic molecularly imprinted polymers for effective extraction and determination of kaempferol from apple samples

The specific of magnetic molecularly imprinted polymers (Fe3O4@SiO2-MIPs) for kaempferol were fabricated by using acrylamide (AM) as the functional monomer, azobisisobutyronitrile (AIBN) as the initiator and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. The Fe3O4@SiO2-MIPs showed high adsorption capacity (3.84 mg/g) for kaempferol, and the adsorption equilibrium was achieved within 50 min. The specific recognition capacity of Fe3O4@SiO2-MIPs was 3.02 times as high as that of Fe3O4@SiO2-NIPs. The Fe3O4@SiO2-MIPs showed high selectivity towards kaempferol over structural analogues. The recoveries of proposed method at three spiked levels analysis were ranged from 90.5% to 95.4% with the relative standard deviations (RSD) less than 5%. The obtained Fe3O4@SiO2-MIPs were successfully applied for the extraction and determination of kaempferol from apple samples. The established method was simple and feasible, which showed high selectivity, fast separation and satisfactory recoveries for real sample analysis.

Cobalt-doped hydroxyapatite nanoparticles as a new eco-friendly catalyst of luminol-H2O2 based chemiluminescence reaction: Study of key factors, improvement the activity and analytical application

In this study, a novel catalyst based on hydroxyapatite doped by cobalt for chemiluminescence reaction of luminol oxidation by H₂O₂ was suggested for the first time. The catalyst nanoparticles were synthesized by a hydrothermal method and characterized by various methods including density functional theory calculations. The impact of nanoparticles sizes, surface composition, contact efficiency and crystallinity on chemiluminescence intensity were investigated. The maximum chemiluminescence intensity was obtained for polycrystalline nanoparticles. This phenomenon was studied in detail and applied for chemiluminescence analysis for the first time. The chemiluminescence determination of sulfonamides as model analytes was considered. The sensing was based on sulfonamides-dependent quenching of the chemiluminescence intensity in the presence of novel catalyst existed as an aqueous suspension.

Trends in sensitive detection and rapid removal of sulfonamides: A review

Sulfonamides in environmental water, food, and feed are a major concern for both aquatic ecosystems and public health, because they may lead to the health risk of drug resistance. Thus, numerous sensitive detection and rapid removal methodologies have been established. This review summarizes the sample preparation techniques and instrumental methods used for sensitive detection of sulfonamides. Additionally, adsorption and photocatalysis for the rapid removal of sulfonamides are also discussed. This review provides a comprehensive perspective on future sulfonamide analyses that have good performance, and on the basic methods for the rapid removal of sulfonamides.

Simultaneous determination of sulfonamides and fluoroquinolones from environmental water based on magnetic double-template molecularly imprinting technique

In this work, a fast and selective method based on magnetic extraction is presented for the simultaneous extraction of sulfonamides (SAs) and fluoroquinolones (FQs), followed by liquid chromatography-tandem mass spectrometry detection. In this method, magnetic surface double-template molecularly imprinted polymers (MSdt-MIPs) with superparamagnetic property and high selectivity toward both SAs and FQs were synthesized and directly applied to the simultaneous extraction of SAs and FQs from environmental water as magnetic adsorbents. The extraction and enrichment procedures could be accomplished in one single step by stirring the mixture of MSdt-MIPs and water sample, and the MSdt-MIPs with adsorbed analytes were easily separated from the water sample by a magnet afterwards. The adsorption mechanism of MSdt-MIPs was investigated by employing the adsorption thermodynamic and kinetic studies, and the selectivity of the MSdt-MIPs toward target analytes was evaluated through the selectivity test. For validation of the proposed method, the matrix effect was evaluated and compared to that of the traditional SPE method. Excellent linearity (R > 0.9990) for both SAs and FQs were obtained in the concentration range of 20-2000 ng L^-1, and the limits of detection are in the range of 3.0-4.7 ng L^-1 for SAs while 4.1-6.1 ng L^-1 for FQs. Finally, the proposed method was successfully applied to the simultaneous determination of SAs and FQs in several environmental water samples.

Modifications of Au Nanoparticle-Functionalized Graphene for Sensitive Detection of Sulfanilamide

In this paper, we present a simple and feasible electrochemical sensor based on Au nanoparticle-functionalized graphene for the determination of sulfanilamide. Au nanoparticles were deposited on graphene, which acted as a platform to prepare excellent nanocomposites. Attributed to the graphene’s large surface area and the Au nanoparticles’ strong conductivity, many sulfanilamide molecules were enriched on the sensor surface and the signal response became more sensitive. Under the optimal conditions, the electrochemical sensors could be used for the efficient detection of sulfanilamide. Good linearity was observed in the range of 0.1–1000 μmol·L⁻¹ and the detection limit was 0.011 μmol·L⁻¹. Most importantly, the Au nanoparticle-functionalized graphene-modified electrode could be successfully applied for the detection of sulfanilamide in animal meat, and exhibited good stability, acceptable recovery, and offered a promising platform for point-of-care detecting in real samples.

Fast quantification of fluoroquinolones in environmental water samples using molecularly imprinted polymers coupled with internal extractive electrospray ionization mass spectrometry

A simple, fast and high-sensitivity method for quantification of fluoroquinolones in environmental water samples using MIPs-iEESI-MS.