1
|
Zeshan M, Bhatti IA, Mohsin M, Iqbal M, Amjed N, Nisar J, AlMasoud N, Alomar TS. Remediation of pesticides using TiO 2 based photocatalytic strategies: A review. CHEMOSPHERE 2022; 300:134525. [PMID: 35427656 DOI: 10.1016/j.chemosphere.2022.134525] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2021] [Revised: 03/31/2022] [Accepted: 04/03/2022] [Indexed: 06/14/2023]
Abstract
Nowadays, pesticides are regarded as the most dangerous of the various organic pollutants, posing substantial environmental and human threats worldwide. Pesticide contamination has become one of the most crucial environmental issues due to its bio-persistence and bioaccumulation. Different conventional methods are being utilized for pesticide removal, yet pesticides are thought to be significantly present in the environment. The development and application of sophisticated wastewater treatment methods are being pursued to remove contaminants effectively, particularly pesticides. In the past several decades, nanoscience and nanotechnology have emerged as essential tools for the identification, removal, and mineralization of persistent pesticides by employing advanced nanomaterials such as pristine titanium dioxide (TiO2), doped TiO2, nanocomposites (NCs) TiO2, and ternary nanocomposites (TNCs) TiO2 by advanced oxidation processes (AOPs). Advancement in the characteristics of TiO2 by doping, co-doping, construction of NCs and TNCs has contributed to the dramatic efficiency up-gradation by reducing band gap, solar active photocatalyst, enhancing PCA, high photostability, chemically inertness and multiple time reusability. Based on previous literature, utilizing La-TiO2 NCs photocatalyst, the mineralization of pesticide (imidacloprid) attained up to 98.17% that is almost 40-53% greater than pristine TiO2. The present review attempt to discuss the recent research performed on TiO2 based nanoparticles (NPs) and NCs for photocatalytic mineralization of various pesticides. The basic mechanism of TiO2 photocatalysis, types of reactors used for photocatalysis, and optimized experimental conditions of TiO2 for pesticides mineralization are discussed.
Collapse
Affiliation(s)
- Muhammad Zeshan
- Department of Chemistry, University of Agriculture, Faisalabad, 38040, Pakistan
| | - Ijaz A Bhatti
- Department of Chemistry, University of Agriculture, Faisalabad, 38040, Pakistan.
| | - Muhammad Mohsin
- Department of Chemistry, University of Agriculture, Faisalabad, 38040, Pakistan.
| | - Munawar Iqbal
- Department of Chemistry, Division of Science and Technology, University of Education, Lahore, Pakistan.
| | - Nyla Amjed
- Department of Chemistry, The University of Lahore, Lahore, 53700, Pakistan
| | - Jan Nisar
- National Centre of Excellence in Physical Chemistry, University of Peshawar, Peshawar, 25120, Pakistan
| | - Najla AlMasoud
- Department of Chemistry, College of Science, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia
| | - Taghrid S Alomar
- Department of Chemistry, College of Science, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia
| |
Collapse
|
2
|
Chakachaka V, Tshangana C, Mahlangu O, Mamba B, Muleja A. Interdependence of Kinetics and Fluid Dynamics in the Design of Photocatalytic Membrane Reactors. MEMBRANES 2022; 12:membranes12080745. [PMID: 36005662 PMCID: PMC9412706 DOI: 10.3390/membranes12080745] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Revised: 06/11/2022] [Accepted: 06/15/2022] [Indexed: 01/18/2023]
Abstract
Photocatalytic membrane reactors (PMRs) are a promising technology for wastewater reclamation. The principles of PMRs are based on photocatalytic degradation and membrane rejection, the different processes occurring simultaneously. Coupled photocatalysis and membrane filtration has made PMRs suitable for application in the removal of emerging contaminants (ECs), such as diclofenac, carbamazepine, ibuprofen, lincomycin, diphenhydramine, rhodamine, and tamoxifen, from wastewater, while reducing the likelihood of byproducts being present in the permeate stream. The viability of PMRs depends on the hypotheses used during design and the kinetic properties of the systems. The choice of design models and the assumptions made in their application can have an impact on reactor design outcomes. A design’s resilience is due to the development of a mathematical model that links material and mass balances to various sub-models, including the fluid dynamic model, the radiation emission model, the radiation absorption model, and the kinetic model. Hence, this review addresses the discrepancies with traditional kinetic models, fluid flow dynamics, and radiation emission and absorption, all of which have an impact on upscaling and reactor design. Computational and analytical descriptions of how to develop a PMR system with high throughput, performance, and energy efficiency are provided. The potential solutions are classified according to the catalyst, fluid dynamics, thickness, geometry, and light source used. Two main PMR types are comprehensively described, and a discussion of various influential factors relating to PMRs was used as a premise for developing an ideal reactor. The aim of this work was to resolve potential divergences that occur during PMRs design as most real reactors do not conform to the idealized fluid dynamics. Lastly, the application of PMRs is evaluated, not only in relation to the removal of endocrine-disrupting compounds (EDCs) from wastewater, but also in dye, oil, heavy metals, and pesticide removal.
Collapse
|
3
|
Dong Y, Wu H, Yang F, Gray S. Cost and efficiency perspectives of ceramic membranes for water treatment. WATER RESEARCH 2022; 220:118629. [PMID: 35609431 DOI: 10.1016/j.watres.2022.118629] [Citation(s) in RCA: 31] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2022] [Revised: 03/12/2022] [Accepted: 05/15/2022] [Indexed: 06/15/2023]
Abstract
More robust ceramic membranes with tailorable structures and functions are increasingly employed for water treatment, particularly in some harsh applications for their ultra-long service lifespan due to their high mechanical, structural, chemical and thermal stability and anti-fouling properties. Decreasing cost and enhancing efficiency are two key but quite challenging application-oriented issues for broader and larger-scale engineering application of current ceramic membranes, and are required to make ceramic membranes a highly efficient and economic water treatment technique. In this review, we critically discuss these two significant concerns of both cost and efficiency for water treatment ceramic membranes, focusing on an overview of various advanced strategies and mechanism insights. A brief up-to-date discussion is first introduced about recent developments of ceramic membranes covering the major advances of novel membranes and applications. Then some promising strategies for decreasing the cost of ceramic membranes are discussed, including membrane material cost and processing cost. To fully address the issue of moderate efficiency with single separation function, valuable and considerable insights are provided into recent major progress and mechanism understandings in application with other unit processes, such as advanced oxidation and electrochemistry techniques, to significantly enhance treatment efficiency. Subsequently, a review of recent ceramic membrane applications emphasizing harsh operating environments is presented, such as oil-water separation, saline water, refractory organic and emerging contaminant wastewater treatment. Finally, engineering application, conclusions, and future perspectives of ceramic membrane for water treatment applications are critically discussed offering new insight based on understanding the issues of cost and efficiency.
Collapse
Affiliation(s)
- Yingchao Dong
- Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024, China.
| | - Hui Wu
- Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024, China
| | - Fenglin Yang
- Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024, China
| | - Stephen Gray
- Institute for Sustainable Industries & Liveable Cities, Victoria University, PO Box 14428, Melbourne, Australia
| |
Collapse
|
4
|
Li C, Sun W, Lu Z, Ao X, Li S. Ceramic nanocomposite membranes and membrane fouling: A review. WATER RESEARCH 2020; 175:115674. [PMID: 32200336 DOI: 10.1016/j.watres.2020.115674] [Citation(s) in RCA: 106] [Impact Index Per Article: 26.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/11/2019] [Revised: 02/10/2020] [Accepted: 02/27/2020] [Indexed: 05/26/2023]
Abstract
Membrane technologies have broad applications in the removal of contaminants from drinking water and wastewater. In recent decades, ceramic membrane has made rapid progress in industrial/municipal wastewater treatment and drinking water treatment owing to their advantageous properties over conventional polymeric membrane. The beneficial characteristics of ceramic membranes include fouling resistance, high permeability, good recoverability, chemical stability, and long life time, which have found applications with the recent innovations in both fabrication methods and nanotechnology. Therefore, ceramic membranes hold great promise for potential applications in water treatment. This paper mainly reviews the progress in the research and development of ceramic membranes, with key focus on porous ceramic membranes and nanomaterial-functionalized ceramic membranes for nanofiltration or catalysis. The current state of the available ceramic membranes in industry and academia, and their potential advantages, limitations and applications are reviewed. The last section of the review focuses on ceramic membrane fouling and the efforts towards ceramic membrane fouling mitigation. The advances in ceramic membrane technologies have rarely been widely reviewed before, therefore, this review could be served as a guide for the new entrants to the field, as well to the established researchers.
Collapse
Affiliation(s)
- Chen Li
- School of Environment, Tsinghua University, Beijing, 100084, China
| | - Wenjun Sun
- School of Environment, Tsinghua University, Beijing, 100084, China.
| | - Zedong Lu
- School of Environment, Tsinghua University, Beijing, 100084, China
| | - Xiuwei Ao
- School of Environment, Tsinghua University, Beijing, 100084, China
| | - Simiao Li
- School of Environment, Tsinghua University, Beijing, 100084, China
| |
Collapse
|
5
|
Zinc oxide based photocatalytic degradation of persistent pesticides: A comprehensive review. ACTA ACUST UNITED AC 2020. [DOI: 10.1016/j.enmm.2020.100290] [Citation(s) in RCA: 37] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
6
|
Rodríguez-Chueca J, Mesones S, Marugán J. Hybrid UV-C/microfiltration process in membrane photoreactor for wastewater disinfection. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2019; 26:36080-36087. [PMID: 30276688 DOI: 10.1007/s11356-018-3262-x] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/02/2018] [Accepted: 09/14/2018] [Indexed: 06/08/2023]
Abstract
A novel hybrid UV-C/microfiltration process for water disinfection is presented, and its application in continuous mode operation to the removal of different pathogen germs (Escherichia coli, Enterococcus faecalis, and Candida albicans) present in urban wastewater. The membrane photoreactor is based on porous stainless steel membranes coated with a TiO2 layer and illuminated by a UV-C lamp (254 nm). A valve actuator in the outlet of the UV-C stream allows operation of the system under conditions of constant transmembrane pressure (TMP) keeping the UV-C contact time in few seconds, significantly lower than the typical irradiation time employed in TiO2 photocatalytic processes. An E. coli removal of up to 4-log in the permeate stream and up to 2-log in the UV-C outlet was achieved with a 0.2 μm membrane operating with a TMP of 0.5 bar and a UV-C contact time as low as 8 s. The microbial balance data from the cells recovered from the membrane confirmed that 96-98% of the removed microorganisms died due to the UV-C action over the membrane surface. Modification of the membrane with a TiO2 layer has been also shown to be a suitable way to improve both the UV-C inactivation and the filtration efficiency. The results reported in this work constitute a proof of concept of the synergy between UV-C and filtration that can be achieved in a hybrid UV-C/microfiltration system, being a good example of process intensification where two products of different quality can be simultaneously obtained.
Collapse
Affiliation(s)
- Jorge Rodríguez-Chueca
- Department of Chemical and Environmental Technology (ESCET), Universidad Rey Juan Carlos, C/ Tulipán s/n, 28933, Móstoles, Madrid, Spain
- Department of Chemical, Industrial & Environmental Engineering, Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Madrid (UPM), C/ José Gutiérrez Abascal 2, 28006, Madrid, Spain
| | - Sandra Mesones
- Department of Chemical and Environmental Technology (ESCET), Universidad Rey Juan Carlos, C/ Tulipán s/n, 28933, Móstoles, Madrid, Spain
| | - Javier Marugán
- Department of Chemical and Environmental Technology (ESCET), Universidad Rey Juan Carlos, C/ Tulipán s/n, 28933, Móstoles, Madrid, Spain.
| |
Collapse
|
7
|
Overview of Photocatalytic Membrane Reactors in Organic Synthesis, Energy Storage and Environmental Applications. Catalysts 2019. [DOI: 10.3390/catal9030239] [Citation(s) in RCA: 41] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022] Open
Abstract
This paper presents an overview of recent reports on photocatalytic membrane reactors (PMRs) in organic synthesis as well as water and wastewater treatment. A brief introduction to slurry PMRs and the systems equipped with photocatalytic membranes (PMs) is given. The methods of PM production are also presented. Moreover, the process parameters affecting the performance of PMRs are characterized. The applications of PMRs in organic synthesis are discussed, including photocatalytic conversion of CO2, synthesis of KA oil by photocatalytic oxidation, conversion of acetophenone to phenylethanol, synthesis of vanillin and phenol, as well as hydrogen production. Furthermore, the configurations and applications of PMRs for removal of organic contaminants from model solutions, natural water and municipal or industrial wastewater are described. It was concluded that PMRs represent a promising green technology; however, before the application in industry, additional studies are still required. These should be aimed at improvement of process efficiency, mainly by development and application of visible light active photocatalysts and novel membranes resistant to the harsh conditions prevailing in these systems.
Collapse
|
8
|
Abstract
The present work gives a critical overview of the recent progresses and new perspectives in the field of photocatalytic membranes (PMs) in photocatalytic membrane reactors (PMRs), thus highlighting the main advantages and the still existing limitations for large scale applications in the perspective of a sustainable growth. The classification of the PMRs is mainly based on the location of the photocatalyst with respect to the membranes and distinguished in: (i) PMRs with photocatalyst solubilized or suspended in solution and (ii) PMRs with photocatalyst immobilized in/on a membrane (i.e., a PM). The main factors affecting the two types of PMRs are deeply discussed. A multidisciplinary approach for the progress of research in PMs and PMRs is presented starting from selected case studies. A special attention is dedicated to PMRs employing dispersed TiO2 confined in the reactor by a membrane for wastewater treatment. Moreover, the design and development of efficient photocatalytic membranes by the heterogenization of polyoxometalates in/on polymeric membranes is discussed for applications in environmental friendly advanced oxidation processes and fine chemical synthesis.
Collapse
|