Long-term study of Cr, Ni, Zn, and P distribution in Typha domingensis growing in a constructed wetland

Free water surface constructed wetlands: review of pollutant removal performance and modeling approaches

Free water surface constructed wetlands (FWSCWs) for the treatment of various wastewater types have evolved significantly over the last few decades. With an increasing need and interest in FWSCWs applications worldwide due to their cost-effectiveness and other benefits, this paper reviews recent literature on FWSCWs' ability to remove different types of pollutants such as nutrients (i.e., TN, TP, NH4-N), heavy metals (i.e., Fe, Zn, and Ni), antibiotics (i.e., oxytetracycline, ciprofloxacin, doxycycline, sulfamethazine, and ofloxacin), and pesticides (i.e., Atrazine, S-Metolachlor, imidacloprid, lambda-cyhalothrin, diuron 3,4-dichloroanilin, Simazine, and Atrazine) that may co-exist in wetland inflow, and discusses approaches for simulating hydraulic and pollutant removal processes. A bibliometric analysis of recent literature reveals that China has the highest number of publications, followed by the USA. The collected data show that FWSCWs can remove an average of 61.6%, 67.8%, 54.7%, and 72.85% of inflowing nutrients, heavy metals, antibiotics, and pesticides, respectively. Optimizing each pollutant removal process requires specific design parameters. Removing heavy metal requires the lowest hydraulic retention time (HRT) (average of 4.78 days), removing pesticides requires the lowest water depth (average of 0.34 m), and nutrient removal requires the largest system size. Vegetation, especially Typha spp. and Phragmites spp., play an important role in FWSCWs' system performance, making significant contributions to the removal process. Various modeling approaches (i.e., black-box and process-based) were comprehensively reviewed, revealing the need for including the internal process mechanisms related to the biological processes along with plants spp., that supported by a further research with field study validations. This work presents a state-of-the-art, systematic, and comparative discussion on the efficiency of FWSCWs in removing different pollutants, main design factors, the vegetation, and well-described models for performance prediction.

Resistance of the fiber-derived geotextile from Typha domingensis submitted to field degradation

Geotextiles made from plant fibers creates a suitable environment for plant growth as part of soil bioengineering techniques. The faster decomposition of plant fiber geotextiles compared to synthetic ones demands the use of composites that enhance their waterproofing and extend their durability in the environment. The objective of this work was to evaluate the resistance of a geotextile made with Thypha domingensis to degradation caused by climatic variables. Tensile strength tests were conducted in the laboratory in order to evaluate the degradation of geotextiles treated with single and double layers of waterproofing resin. Based on Scanning Electron Microscopy (SEM) images, it was verified that applying double layer of waterproofing resin delays the fibers degradation up to 120 days of exposure to the effects of climatic variables other than temperature. The maximum resistance losses due to the geotextile's exposure to degradation were statistically significant for all three treatments: control-without waterproofing resin, with one layer resin, and with two layers resin. Therefore, waterproofing resin, provides a long-term protective solution for geotextiles made from cattail fibers.

Bacterial Communities Associated with the Roots of Typha spp. and Its Relationship in Phytoremediation Processes

Heavy metal pollution is a severe concern worldwide, owing to its harmful effects on ecosystems. Phytoremediation has been applied to remove heavy metals from water, soils, and sediments by using plants and associated microorganisms to restore contaminated sites. The Typha genus is one of the most important genera used in phytoremediation strategies because of its rapid growth rate, high biomass production, and the accumulation of heavy metals in its roots. Plant growth-promoting rhizobacteria have attracted much attention because they exert biochemical activities that improve plant growth, tolerance, and the accumulation of heavy metals in plant tissues. Because of their beneficial effects on plants, some studies have identified bacterial communities associated with the roots of Typha species growing in the presence of heavy metals. This review describes in detail the phytoremediation process and highlights the application of Typha species. Then, it describes bacterial communities associated with roots of Typha growing in natural ecosystems and wetlands contaminated with heavy metals. Data indicated that bacteria from the phylum Proteobacteria are the primary colonizers of the rhizosphere and root-endosphere of Typha species growing in contaminated and non-contaminated environments. Proteobacteria include bacteria that can grow in different environments due to their ability to use various carbon sources. Some bacterial species exert biochemical activities that contribute to plant growth and tolerance to heavy metals and enhance phytoremediation.

Response of Typha domingensis Pers. in floating wetlands systems for the treatment of water polluted with phosphorus and nitrogen

The aims of this work were to evaluate the effects of P and N on the tolerance and root morphometry of Typha domingensis plants, and their implication in removal efficiency in floating treatment wetlands (FTWs). Pilot-scale plastic reactors containing plants, sediment, and tap water were arranged. FTWs consist of a plastic net, and buoyancy was provided by a PVC frame. After plant acclimation, 38 L of the synthetic effluent containing 10 mg L^-1 N + 2 mg L^-1 P was added to the reactors as follows: reactor A (with FTWs), reactor B (without FTWs), reactor BC (biological controls), and reactor CC (chemical control). Reactors were arranged in triplicate. During the experiment, three effluent dumps were made. The removals of SRP and TP were significantly higher in reactor A than in reactor B. N-NH₄⁺ removal was not significantly different between reactors A and B, while N-NO₃^- removal from water was higher in reactor A than in reactor B. At the end of the experiment, chlorophyll concentration and aerial and submerged (roots and rhizomes) biomass increased significantly in reactor A. TP concentrations were not different between rhizomes and leaves, while the lowest concentrations were observed in roots. The TKN in tissues was significantly higher in roots and rhizomes than in aerial parts. In plants exposed to the experimental solution, the internal and external root morphology changed. The use of FTWs is a promising strategy for the sustainable treatment of nutrient polluted water bodies.

Inorganic nutrient removal efficiency of a constructed wetland before discharging into an urban eutrophic estuary

This study investigated the nutrient removal efficiency of a constructed wetland (CW) piloted to treat urban runoff before entering an estuary. Physico-chemical, dissolved inorganic nutrient (DIN and DIP), and stormwater inflow volume data were measured. The CW removal efficiency of DIN was negligible (5% uptake), while it acted as a consistent source of DIP (68% efflux) to the receiving estuarine waters. There was low water residency within the small CW (0.8 ha) that has been compounded by a 10-fold increase in flow volume since 2016. The surface area of the CW would need to be increased to 46 ha to cope with current daily inputs (ca. 6300 m³ d^-1). The lack of maintenance (e.g., macrophyte harvesting, sediment desludging) has reduced nutrient uptake and increased autochthonous inputs. The conversion of an abandoned saltpan into an extension of the CW has been considered to manage the high flow volume and remove nutrients.

Treatment wetlands and phyto-technologies for remediation of winery effluent: Challenges and opportunities

The composition and concentration of contaminants present in winery wastewater fluctuate through space and time, presenting a challenge for traditional remediation methods. Bio-hydrogeochemical engineered systems, such as treatment wetlands, have been demonstrated to effectively reduce contaminant loads prior to disposal or reuse of the effluent. This review identifies and details the status quo and challenges associated with (i) the characteristics of winery wastewater, and the (ii) functional components, (iii) operational parameters, and (iv) performance of treatment wetlands for remediation of winery effluent. Potential solutions to challenges associated with these aspects are presented, based on the latest literature. A particular emphasis has been placed on the phytoremediation of winery wastewater, and the rationale for selection of plant species for niche bioremediatory roles. This is attributed to previously reported low-to-negative removal percentages of persistent contaminants, such as salts and heavy metals that may be present in winery wastewater. A case for the inclusion of selected terrestrial halophytes in treatment wetlands and in areas irrigated using winery effluent is discussed. These are plant species that have an elevated ability to accumulate, cross-tolerate and potentially remove a range of persistent contaminants from winery effluent via various phytotechnologies (e.g., phytodesalination).

Cr, Ni, and Zn removal from landfill leachate using vertical flow wetlands planted with Typha domingensis and Canna indica

Chromium (Cr), Nickel (Ni), and zinc (Zn) removal from landfill leachate using mesocosm-scale vertical flow wetlands, the effect of recirculation, and the ability of macrophytes to retain metals were evaluated. Wetlands were filled with coarse sand and light expanded clay aggregates and planted with Typha domingensis or Canna indica. Wetlands were operated using intermittent loading, with and without recirculation. Raw leachate was diluted and spiked with metals to reach the following concentrations: 0.2 mg L^-1 Cr , 0.2 mg L^-1 Ni, and0.2 mg L^-1 Zn and 1.0 mg L^-1 Cr, 1.0 mg L^-1 Ni, and 1.0 mg L^-1 Zn. Wetlands planted with T. domingensis presented higher metal removal than those planted with C. indica. Recirculation enhanced metal removal efficiencies significantly, being for T. domingensis/C. indica: 60/54, 49/47, 61/47% for Cr, Ni, and Zn at 0.2 mg L^-1, and 80/71, 76/62, 73/59% for Cr, Ni, and Zn at 1.0 mg L^-1, respectively. Metals were efficiently retained by macrophytes. Plant biomass and metal concentrations in roots were significantly higher than in shoots. Scanning electron microscopy and X-ray microanalysis showed that metals were absorbed by internal root tissues. A hybrid wetland planted with T. domingensis may be implemented to improve not only metal but also chemical oxygen demand and total nitrogen removals.

Interspecific competition and their impacts on the growth of macrophytes and pollutants removal within constructed wetland microcosms treating domestic wastewater

Eight free water surface constructed wetland microcosm (CWM) units are designed with single as well as mixed planting of Pistia stratiotes, Phragmites karka, and Typha latifolia with control to assess their competitive value (CV), relative growth rates (RGR), and pollutants removal efficiency. Further, the total dry biomass production and other growth parameters such as number of macrophytes, above-ground biomass, below-ground biomass, and root length were also measured to understand the dominant characteristics of the macrophytes. The CWM units with species mixture out-performed species monocultures. Removal of BOD, TP, SRP, NH₄⁺-N, NO₃^--N, and NO₂^--N by mixed planting of P. stratiotes and P. karka was higher at most of the time. Typha latifolia was the superior competitor against both P. stratiotes and P. karka due to its aggressive characteristics that inhibits the growth of neighboring macrophytes. However, P. karka was the superior competitor against P. stratiotes. The RGR of T. latifolia in all experimental units was almost two times more than that of P. karka. Novelty Statement The CWM units with species mixture out-performed species monocultures. CWMs with more than one macrophytic species are less vulnerable to seasonal fluctuations and more effective in contaminants removal as compared to single macrophyte wetlands. Removal of BOD, TP, SRP, NH₄⁺-N, NO₃^--N, and NO₂^--N by mixed planting of P. stratiotes and P. karka was higher at most of the time. The CWMs with P. stratiotes and P. karka are superior choice due to their higher wastewater nutrients removal capacity. The application of these three macrophytes in mixed cultures in free water surface constructed wetland is rare. The results are useful in designing large-scale multi-species wetlands which are less susceptible to seasonal variation and more effective in pollutants removal than single-species wetlands.

Selection of macrophytes and substrates to be used in horizontal subsurface flow wetlands for the treatment of a cheese factory wastewater

The aims of this study were to select the most suitable macrophyte species and substrate to be used in horizontal subsurface flow (HSSF) wetlands for the treatment of a local cheese factory wastewater, and to quantify the influence of plant species and substrates by applying of a simple first-order kinetic model. Microcosms-scale HSSF wetlands were planted with Canna glauca or Typha domingensis. LECA and river stones were used as substrates. Both studied macrophytes showed a high tolerance to the treated wastewater. HSSF wetlands were efficient for the treatment of diluted cheese production wastewater. COD, TP, NH₄⁺-N and TN showed high removal efficiencies in all the HSSF wetlands. HSSF wetlands planted with C. glauca showed the best performance for removal of NH₄⁺-N. The highest SRP removal was obtained in HSSF wetlands planted C. glauca with LECA as substrate. A simple first-order kinetics model was applied. The fitted parameters of the modified first-order model k-C* allowed to demonstrate the effect of the plants in the treatment of the effluent. HSSF wetlands planted with C. glauca using river stones were the systems that showed the fastest TIN removal. According to the obtained results, it is proposed to use C. glauca and river stones as substrate in a HSSF wetland for the treatment of this wastewater. The present study provides useful data to design a wetland at a larger scale.

Performance of lab-scale microbial fuel cell coupled with unplanted constructed wetland for hexavalent chromium removal and electricity production

The microbial fuel cell coupled constructed wetland (CW-MFC) was used for treatment sewage and simultaneously generating electricity. The main aim of this study was to explore the optimal conditions for the treatment of hexavalent chromium (Cr (VI)) wastewater by the CW-MFC system. The performance of CW-MFC in removing Cr (VI) and chemical oxygen demands (COD) contained in wastewater and its electricity generation were studied. Electrode spacing, Cr (VI) and COD concentration, and hydraulic retention time (HRT) had certain effects on the performance of CW-MFC. For the electrode spacing of 10 cm, the highest power density of 458.2 mW/m³ could be obtained with the influent concentration of Cr (VI) (60 mg/L) and COD (500 mg/L). The highest Cr (VI) and COD removal rate were obtained with the HRT of 3 days. Compared with CW system, the electrical energy generated in CW-MFC was beneficial to improving the removal efficiency of COD and Cr (VI). Thus, the results confirmed that CW-MFC is a promising technology to remove Cr (VI) from wastewater and achieve bioelectricity production simultaneously.

Constructed Wetlands in Latin America and the Caribbean: A Review of Experiences during the Last Decade

The review aims to report the state-of-the-art constructed wetlands (CW) in the Latin America and Caribbean (LAC) region not limited to national and local conditions. The aim is with a broader view, to bring updated and sufficient information, to facilitate the use of the CW technology in the different countries of LAC. Thus, 520 experiences extracted from the 169 reviewed documents in 20 countries were analyzed. According to the data, horizontal subsurface flow wetlands are the most reported CW in the region (62%), the second most common CW technology in the region is free water surface CW (17%), then vertical flow systems (9%), followed by intensified constructed wetlands (8%), and finally French systems (4%). The performance for nutrient removal is analyzed, finding that the mean of Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorous (TP) removal efficiencies varies from 65% to 83%, 55% to 72%, and 30% to 84%, respectively. The results suggest a generally good performance for COD and TN removal, but a low performance for TP removal. Regarding plant species used for CWs, 114 different plant species were reported, being until now the most extensive report about plant species used in CWs in the LAC region.

Constructed wetlands for steel slag leachate management: Partitioning of arsenic, chromium, and vanadium in waters, sediments, and plants

Constructed wetlands can treat highly alkaline leachate resulting from the weathering of steel slag before reuse (e.g. as aggregate) or during disposal in repositories and legacy sites. This study aimed to assess how metal(loid)s soluble at high pH, such as arsenic (As), chromium (Cr), and vanadium (V) are removed in constructed wetlands and how they accumulate in the sediments and the plants (Phragmites australis, common reed). The results show that reedbeds were very effective at removing calcium (98%), aluminium (81%), barium (98%), chromium (90%), gallium (80%), nickel (98%), and zinc (98%), and lowering pH and alkalinity. No statistical difference was found for As and V between leachate influent and wetland samples, showing that these metal(loid)s were not efficiently removed. As, Cr, and V were significantly higher in the reedbed sediments than in a reference site. However, sediment concentrations are not at levels that would pose a concern regarding reuse for agricultural purposes (average values of 39 ± 26 mg kg^-1 for As, 108 ± 15 mg kg^-1 for Cr, and 231 ± 34 mg kg^-1 for V). Also, there is no significant uptake of metals by the aboveground portions of the reeds compared to reference conditions. Results show statistically significant enrichment in metal(loid)s in rhizomes and also a seasonal effect on the Cr concentrations. The data suggest minimal risk of oxyanion-forming element uptake and cycling in wetlands receiving alkaline steel slag.