Production, characterization, and potential of activated biochar as adsorbent for phenolic compounds from leachates in a lumber industry site

Utilizing sludge-based activated carbon for targeted leachate mitigation in wastewater treatment

Activated carbon (AC) based adsorbents derived from waste sludge were utilized to remediate mixed contaminants in wastewater as an integrated waste-to-resource approach promoting a paradigm shift in management of refuse sludge and wastewater. This review specifically focuses on the remediation of constituents of landfill leachate by sludge-based activated carbon (SBAC). The adsorption effectiveness of SBAC for the exclusion of leachate characters including heavy metals, phenols, dyes, phosphates, and phosphorus were explored with regard to modifiers such as pH, temperature, properties of the adsorbent including functional groups, initial doses of absorbent and adsorbate, and duration of exposure to note the impact of each parameter on the efficiency of adsorption of the sludge adsorbent. Through the works of various researchers, it was noted that the properties of the adsorbent, pH and temperature impact the working of SBACs. The pH of the adsorbent by influencing the functional groups. Temperature was expected to have a paramount effect on the adsorption efficiency of the SBACs. The importance of the regeneration and recycling of the adsorbents as well as their leachability is highlighted. Sludge based activated carbon is recommended as a timely, resource-efficient, and sustainable approach for the remediation of wastewater.

Kinetic, isotherm modeling analyses of the adsorption of phenol on activated carbon/alginate composites

The present study aimed to synthesize calcium alginate-commercial activated carbon composite beads (CA-AC) and calcium alginate-walnut shell biochar composite beads (CA-WSB) using activated carbon (AC), walnut shell biochar (WSB), and to apply its efficiency in phenol removal. The synthesized samples were characterized by energy-dispersive X-ray spectroscopy (EDS), X-ray fluorescence (XRF) spectrometry.The Brunauer, Emmett, and Teller (BET) method was used to obtain information about the samples' surface area and pore size. The kinetic model of phenol fitted well to the pseudo-second-order kinetic model. The isotherm model of phenol fitted well to the Langmuir isotherm model compared with other models. The maximum adsorption capacity was 76.92, 0.419, 8.130 1.375 mg/g for AC, WSB, CA-AC, CA-WSB.

State of the art on the ultrasonic-assisted removal of environmental pollutants using metal-organic frameworks

The environmental and health issues of drinking water and effluents released into nature are among the major area of contention in the past few decades. With the growth of ultrasound-based approaches in water and wastewater treatment, promising materials have also been considered to employ their advantages. Metal-organic frameworks (MOFs) are among the porous materials that have received great attention from researchers in recent years. Features such as high porosity, large specific surface area, electronic properties like semi-conductivity, and the capacity to coordinate with the organic matter have resulted in a substantial increase in scientific researches. This work deals with a comprehensive review of the application of MOFs for ultrasonic-assisted pollutant removal from wastewater. In this regard, after considering features and synthesis methods of MOFs, the mechanisms of several ultrasound-based approaches including sonocatalysis, sonophotocatalysis, and sono-adsorption are well assessed for removal of different organic compounds by MOFs. These methods are compared with some other water treatment processes with the application of MOFs in the absence of ultrasound. Also, the main concern about MOFs including environmental hazards and water stability is fully discussed and some techniques are proposed to reduce hazardous effects of MOFs and improve stability in humid/aqueous environments. Economic aspects for the preparation of MOFs are evaluated and cost estimates for ultrasonic-assisted AOP approaches were provided. Finally, the future outlooks and the new frontiers of ultrasonic-assisted methods with the help of MOFs in global environmental pollutant removal are presented.

Performance and dynamic modeling of a continuously operated pomace olive packed bed for olive mill wastewater treatment and phenol recovery

The solid waste of olive oil extraction processes (olive pomace, OP) was converted into activated carbon (AC) by treating it with NaOH and then encapsulating it within sodium alginate (SA) in beads by crosslinking (SA-AC beads). The prepared SA-AC beads were utilized as an adsorbent for the elimination and recovery of phenolic compounds (PCs) from olive mill wastewater (OMWW) following a zero liquid and waste discharge approach to implement and promote the circular economy concept. The novel AC and SA-AC beads were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and Brunauer, Emmett and Teller (BET) analysis. The adsorption performance of these beads was evaluated in batch and fixed-bed reactors operated in a concurrent flow system. The results revealed that an adsorption capacity of 68 mg g^-1 was attained for 4000 mg L^-1 phenolic compounds. The kinetics of the adsorption process of the PCs fit a pseudo second-order model, and the most likely mechanism took place in two stages. The adsorption isotherm conformed to the Langmuir model, representing the monolayer adsorption of the phenolic compounds. The dynamic models were used, and they accurately represented the breakthrough curves. Considering PC recovery and process reusability, a regeneration experiment of SA-AC beads was carried out in fixed-bed reactors. SA-AC beads showed a high percentage desorption >40% using ethanol and were efficient after several cycles of OMWW treatment and phenol recovery.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Effect of ammonia removal and biochar detoxification on anaerobic digestion of aqueous phase from municipal sludge hydrothermal liquefaction

Hydrothermal liquefaction is a promising method to convert municipal sludge into an energy-dense fuel. The inevitable by-product aqueous phase is rich in complex organics, which has the potential for energy and nutrient recovery and can be treated by anaerobic digestion to produce methane. However, toxic compounds such as ammonia and phenolics present would inhibit the function of micro-organisms. This study investigated the influence of ammonia and phenolics removal on anaerobic digestion. The results showed that the treated aqueous phase resulted in up to 225 ml CH₄/g COD. The highest methane production was obtained in the culture with both ammonia and phenolics removal at pH 7.0, which was about 90% higher than only ammonia removal and seven times higher than only phenolics removal. The microbial community analysis results showed that these two treatments could increase microbial diversity and upregulate the relative abundance of methanogens.

Investigation on the adsorption of antibiotics from water by metal loaded sewage sludge biochar

Application of sewage sludge biochar as an adsorbent for antibiotics treatment has obtained special attention owning to its low cost and surface functionality. Three metal ions were selected to modify sewage sludge biochar through the pyrolysis with the metal loaded method. Fe loaded sewage sludge biochar (BC-Fe), Al loaded sewage sludge biochar (BC-Al) and Mn loaded sewage sludge biochar (BC-Mn) were characterized and used to explore the performance of adsorbing tetracycline (TC), sulfamethoxazole (SMZ) and amoxicillin (AMC). BC-Fe, BC-Al and BC-Mn possessed rougher surfaces, larger specific surface area and better pore structure. Intra-particle diffusion and Langmuir models were more suitable to describe the adsorption process. The maximum adsorption amount of TC, SMZ and AMC could reach 123.35, 99.01 and 109.89 mg/g by BC-Fe. Furthermore, the main mechanism of antibiotics adsorption by metal loaded sewage sludge biochars might be pores filling, Van der Waals forces and H-bonding. The study can not only solve the problems associated with the pollution of antibiotics from wastewater, but also reduced the treatment pressure of sewage sludge effectively.

Engineered biochar from wood apple shell waste for high-efficient removal of toxic phenolic compounds in wastewater

This study investigated a novel agricultural low-cost bio-waste biochar derived from wood apple fruit shell waste via the pyrolysis method, which is modified by ball milling and utilized to remove toxic phenol and chlorophenols (4-CPh and 2,4-DCPh) from contaminated aqueous media. The ball-milled wood apple fruit shell waste biochar (WAS-BC) sorbent was systematically analyzed by BET, CHN, and FTIR as well as particle size, SEM-EDS, XPS and TGA studies. The sorption equilibrium and kinetic studies exhibit that the sorption capacity was greater than 75% within the first 45 min of agitation at pH 6.0. The uptake capacity of 2,4-DCPh onto WAS-BC was greater than those of 4-CPh and phenol. Equilibrium results were consistent with the Langmuir isotherm model, while the kinetic data were best represented by the Elovich and pseudo-second-order model. The maximum uptake of phenol, 4-CPh, and 2,4-DCPh was 102.71, 172.24, and 226.55 mg/g, respectively, at 30 ± 1 °C. Thus, this study demonstrates that WAS-BC is an efficient, low-cost sorbent that can be used for the elimination of phenol and chlorophenol compounds from polluted wastewater.

An Overview and Evaluation of Highly Porous Adsorbent Materials for Polycyclic Aromatic Hydrocarbons and Phenols Removal from Wastewater

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

Study of polarized activated carbon filters as simultaneous adsorbent and 3D-type electrode materials for electro-Fenton reactors

Electro-Fenton (EF) based water treatment processes using activated carbon (AC) packed beds constitute an attractive approach for the development of competitive degradation technology of persistent pollutants in aqueous effluents. In this work, the results of a study aimed to assess the effect on the EF performance of different parameters of the reactor's operation are presented. By means of a factorial experimental design, the influence of the AC source (lignitic or vegetal), AC acid pre-treatment, particle size distribution and the amount of Fe loaded resin in the reactor were analyzed. From the resulting data it was found that the most influential parameter in the EF performance of the reactor is the AC source. Modest effects were observed for AC acid pre-treatment, which limits Fe ion adsorption on the AC substrate. The use of a wide particle distribution of AC particles was also found to improve inter-particle electrical contact, thus favoring the electrochemical processes that take place inside the reactor. An investigation on the effect of the amount of Fe in the reactor as well as its distribution dynamics, also revealed that an excess of Fe ions in the reactor decreases the EF performance of the system since Fe ions efficiently adsorb on the AC substrate, particularly in non- acid treated samples. The best operation conditions consisted on using un-meshed vegetable AC, without acid pretreatment in an EF reactor loaded with 0.25 g of Fe, which allowed to reach full color removal of bright blue FCP model dye in 70 min.

Effect of the Pyro-Gasification Temperature of Wood on the Physical and Mechanical Properties of Biochar-Polymer Biocomposites

The physical and mechanical properties of wood (WPC) and biochar polymer composites (BPC) obtained at different pyro-gasification temperatures and different fiber proportions were investigated. Composite pellets made from wood chips or biochar and thermoplastic polymers (polypropylene or high-density polyethylene) were obtained by twin-screw extrusion, and test specimens were prepared by injection molding. Results showed that BPCs were more dimensionally stable compared to WPCs, but their mechanical properties decreased with increasing pyro-gasification temperatures due to the poor adhesion between the polymer and biochar. Indeed, FTIR investigations revealed the decrease or absence of hydroxyl groups on biochar, which prevents the coupling agent from reacting with the biochar surface. The change in the biochar chemical structure led to an improvement in the dimensional stability and hydrophobicity of the biocomposites. Despite the increased dimensional stability of BPCs compared to WPCs, BPCs still adsorb water. This was explained by the surface roughness and by the biochar agglomerations present in the composite. In conclusion, the thermochemical conversion of black spruce wood chips into biochar makes it brittle but more hydrophobic, thereby reducing the wettability of the BPCs.

Removal efficiency of As(V) and Sb(III) in contaminated neutral drainage by Fe-loaded biochar

Performance of raw and two Fe-loaded biochars, produced either by evaporation (E-product, 26.9% Fe) or precipitation (P-product, 12.6% Fe), was evaluated in batch and column testing for As(V) and Sb(III) removal from contaminated neutral drainage (CND). Batch testing results showed that sorption capacity of the E-product tripled for As(V) and quintupled for Sb(III), whereas for the P-product, it doubled for both contaminants, relative to the raw biochar. Moreover, As(V) removal by the E-product reached 90% in less than 8 h, for initial concentrations up to 50 mg/L. In column testing, the E-product efficiently treated the influent [pH 6; 1 mg/L As(V)] for more than 286 days. The pH of the final effluent was within the legally allowed limits (6-9.5) while less than 0.3 mg/L Fe leached out. Based on these findings, Fe-loaded biochar by evaporation (E-product) seems promising for As(V) treatment in CND.

Impacts of leachate of landfill on the groundwater hydrochemistry and size distributions and heavy metal components of colloids: a case study in NE China

Colloids associated with heavy metals are ubiquitous in contaminated groundwater; waste accumulation at imperfectly sealed landfills can produce large amounts of leachate with colloids and heavy metal contaminants, which can pollute the downstream groundwater. In this study, three sites in a landfill were sampled to reveal heavy metal particle size distributions and their chemical compositions. The > 220 nm particle sizes were the predominant size in the downstream groundwater, while the < 10 nm particle sizes were the predominant size in the upstream groundwater. Total Fe increased from 35.5 μg/L in the upstream groundwater to 107 μg/L in the downstream groundwater. This increase was attributed to the enhanced migration and accumulation of colloids in the aqueous phase. The elements and the colloid size distribution in the landfill indirectly reflected the composition and degradation of the waste. Colloids played a key role in distribution of both solid particles and aqueous contaminants in the landfill. The results of this study will contribute to the knowledge of the effect of different contaminants in the vicinity of landfills without appropriate sealing systems.