Mechanistic understanding of cerium oxide nanoparticle-mediated biofilm formation in Pseudomonas aeruginosa

Optimised stress - intensification of pyocyanin production with zinc oxide nanoparticles

BACKGROUND

Pyocyanin is a blue pigment produced by Pseudomonas aeruginosa. Due to its unique redox properties over the last decade, it has gained more and more interest as a utile chemical. Nevertheless, it remains a rather costly reagent. It was previously shown that the production of pyocyanin can be enhanced by employing various methods. Among them are using statistical methods for planning the experiments or exposing bacterial cultures to stressors such as nanoparticles dosed in sublethal concentrations, e.g. zinc oxide nanoparticles.

RESULTS

The Design of Experiment (DoE) methodology allowed for calculating the optimal process temperature and nanoparticle concentration to intensify pyocyanin production. Low concentrations of the nanoparticles (6.06 µg/mL) and a temperature of 32℃ enhanced pyocyanin production, whereas higher concentrations of nanoparticles (275.75 µg/mL) and higher temperature stimulated biomass production and caused the abolishment of pyocyanin production. Elevated pigment production in zinc oxide nanoparticles-supplemented media was sustained in the scaled-up culture. Conducted analyses confirmed that observed stimulation of pyocyanin production is followed by higher membrane potential, altered gene expression, generation of reactive oxygen species, and accumulation of zinc in the cell's biomass.

CONCLUSIONS

Pyocyanin production can be steered using ZnO nanoparticles. Elevated production of pyocyanin due to exposure to nanoparticles is followed by the number of changes in physiology of bacteria and is a result of the cellular stress. We showed that the stress response of bacteria can be optimised using statistical methods and result in producing the desired metabolite more effectively.

Targeting bacterial biofilm-related genes with nanoparticle-based strategies

Persistent infection caused by biofilm is an urgent in medicine that should be tackled by new alternative strategies. Low efficiency of classical treatments and antibiotic resistance are the main concerns of the persistent infection due to biofilm formation which increases the risk of morbidity and mortality. The gene expression patterns in biofilm cells differed from those in planktonic cells. One of the promising approaches against biofilms is nanoparticle (NP)-based therapy in which NPs with multiple mechanisms hinder the resistance of bacterial cells in planktonic or biofilm forms. For instance, NPs such as silver (Ag), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (Cu), and iron oxide (Fe3O4) through the different strategies interfere with gene expression of bacteria associated with biofilm. The NPs can penetrate into the biofilm structure and affect the expression of efflux pump, quorum-sensing, and adhesion-related genes, which lead to inhibit the biofilm formation or development. Therefore, understanding and targeting of the genes and molecular basis of bacterial biofilm by NPs point to therapeutic targets that make possible control of biofilm infections. In parallel, the possible impact of NPs on the environment and their cytotoxicity should be avoided through controlled exposure and safety assessments. This study focuses on the biofilm-related genes that are potential targets for the inhibition of bacterial biofilms with highly effective NPs, especially metal or metal oxide NPs.

Metal-based nanoparticles: an alternative treatment for biofilm infection in hard-to-heal wounds

Metal-based nanoparticles (MNPs) are promoted as effective compounds in the treatment of bacterial infections and as possible alternatives to antibiotics. These MNPs are known to affect a broad spectrum of microorganisms using a multitude of strategies, including the induction of reactive oxygen species and interaction with the inner structures of the bacterial cells. The aim of this review was to summarise the latest studies about the effect of metal-based nanoparticles on pathogenic bacterial biofilm formed in wounds, using the examples of Gram-positive bacterium Staphylococcus aureus and Gram-negative bacterium Pseudomonas aeruginosa, as well as provide an overview of possible clinical applications.

Self-Homeostasis Immunoregulatory Strategy for Implant-Related Infections through Remodeling Redox Balance

Implant-related infections (IRIs) are catastrophic complications after orthopedic surgery. Excess reactive oxygen species (ROS) accumulated in IRIs create a redox-imbalanced microenvironment around the implant, which severely limits the curing of IRIs by inducing biofilm formation and immune disorders. However, current therapeutic strategies commonly eliminate infection utilizing the explosive generation of ROS, which exacerbates the redox imbalance, aggravating immune disorders and promoting infection chronicity. Herein, a self-homeostasis immunoregulatory strategy based on a luteolin (Lut)-loaded copper (Cu²⁺)-doped hollow mesoporous organosilica nanoparticle system (Lut@Cu-HN) is designed to cure IRIs by remodeling the redox balance. In the acidic infection environment, Lut@Cu-HN is continuously degraded to release Lut and Cu²⁺. As both an antibacterial and immunomodulatory agent, Cu²⁺ kills bacteria directly and promotes macrophage pro-inflammatory phenotype polarization to activate the antibacterial immune response. Simultaneously, Lut scavenges excessive ROS to prevent the Cu²⁺-exacerbated redox imbalance from impairing macrophage activity and function, thus reducing Cu²⁺ immunotoxicity. The synergistic effect of Lut and Cu²⁺ confers excellent antibacterial and immunomodulatory properties to Lut@Cu-HN. As demonstrated in vitro and in vivo, Lut@Cu-HN self-regulates immune homeostasis through redox balance remodeling, ultimately facilitating IRI eradication and tissue regeneration.

The two faces of pyocyanin - why and how to steer its production?

The ambiguous nature of pyocyanin was noted quite early after its discovery. This substance is a recognized Pseudomonas aeruginosa virulence factor that causes problems in cystic fibrosis, wound healing, and microbiologically induced corrosion. However, it can also be a potent chemical with potential use in a wide variety of technologies and applications, e.g. green energy production in microbial fuel cells, biocontrol in agriculture, therapy in medicine, or environmental protection. In this mini-review, we shortly describe the properties of pyocyanin, its role in the physiology of Pseudomonas and show the ever-growing interest in it. We also summarize the possible ways of modulating pyocyanin production. We underline different approaches of the researchers that aim either at lowering or increasing pyocyanin production by using different culturing methods, chemical additives, physical factors (e.g. electromagnetic field), or genetic engineering techniques. The review aims to present the ambiguous character of pyocyanin, underline its potential, and signalize the possible further research directions.

Role of Cerium Oxide Nanoparticles and Doxorubicin in Improving Cancer Management: A Mini Review

Cancer is one of the significant issues with public health and the second leading cause of death worldwide. The three most lethal cancers in the general population are stomach, lung, and liver cancers, in which lung and breast cancers cause the majority of cancer-associated deaths among men and women, respectively. CeO2 nanoparticles have a cytoprotectant effect in normal cells and a cytotoxic effect in cancer cells that enables them to induce the reactive oxygen species (ROS) production within cancer cells, which in turn develops reactive nitrogen species (RNS) that interfere with intracellular activities, and this property makes them an excellent anticancer agent. Because of its biofilm suppression, free radical scavenging ability, redox activity, and other unique properties, attention has been bestowed on cerium oxide nanoparticles as a potential alternative to solve many biomedical issues in the future. This review mainly focuses on the combinatorial effect of cerium dioxide nanoparticles and Doxorubicin in cancer management.

Antifouling coatings can reduce algal growth while preserving coral settlement

In the early stages after larval settlement, coral spat can be rapidly overgrown and outcompeted by algae, reducing overall survival for coral reef replenishment and supply for restoration programs. Here we investigated three antifouling (AF) coatings for their ability to inhibit algal fouling on coral settlement plugs, a commonly-used restoration substrate. Plugs were either fully or partially coated with the AF coatings and incubated in mesocosm systems with partial recirculation for 37 days to track fouling succession. In addition, settlement of Acropora tenuis larvae was measured to determine whether AF coatings were a settlement deterrent. Uncoated control plugs became heavily fouled, yielding only 4–8% bare substrate on upper surfaces after 37 days. During this period, an encapsulated dichlorooctylisothiazolinone (DCOIT)-coating was most effective in reducing fouling, yielding 61–63% bare substrate. Antiadhesive and cerium dioxide (CeO_2−x) nanoparticle (NP) coatings were less effective, yielding 11–17% and 2% bare substrate, respectively. Average settlement of A. tenuis larvae on the three types of AF-coated plugs did not statistically differ from settlement on uncoated controls. However, settlement on the NP-coating was generally the highest and was significantly higher than settlement found on the antiadhesive- and DCOIT-coating. Furthermore, on plugs only partially-covered with AF coatings, larval settlement on coated NP- areas was significantly higher than settlement on coated antiadhesive- and DCOIT-areas. These results demonstrate that AF coatings can reduce fouling intensity on biologically-relevant timescales while preserving robust levels of coral settlement. This represents an important step towards reducing fine-scale competition with benthic fouling organisms in coral breeding and propagation.

Evaluation of SDS-coated iron nanostructure on the gene expression of bio surfactant-producing genes by Pseudomonas aeruginosa

Bio surfactants are natural surfactants that induce emulsification, displacement, increased solubility, and mobility of hydrophobic organic compounds. In this study, the gene expression of biosurfactant production genes by Pseudomonas aeruginosa in the presence of sodium dodecyl sulfate coated iron nanostructure (Fe/SDS) were evaluated. Emulsification Index and Surface Tension reduction test to check stability and emulsification the rhamnolipid were done. Purification was evaluated using thin layer chromatography (TLC) and expression of rhlA, mvfR, lasR, rhlR genes was determined using q-PCR technique. Binding of nanoparticles to bio surfactants was confirmed by TEM. The best emulsification index, was by the sample that exposed to 1 mg/L Fe/SDS nanoparticles for 2 days. Rhamnolipid produced in the presence of nanoparticles had an acceptable ability to reduce surface tension. The Rf (retention factor) value obtained was 0.63 by chromatography. q-PCR results showed that the expression of rhlA, mvfR, lasR, rhlR genes was significantly increased in Fe/SDS treated cells, which indicates the significant positive effect (P < 0.05) of nanoparticles on biosurfactant production of treated cells. While, SDS and Fe alone were not affected significantly (P > 0.05) on the expression of these genes. Our findings indicated the importance of nanoparticles in increasing the expression of genes involved in the bio surfactant production pathway of Pseudomonas aeruginosa.

Influence of cerium oxide nanoparticles on dairy effluent nitrate and phosphate bioremediation

This study investigated, for the first time, the role of cerium oxide nanoparticles (CeO2 NPs) on dairy effluent nitrate and phosphate bioremediation using different inoculum sources. Two inoculum sources (wastewater and sludge) were obtained from the dairy wastewater treatment plant unit. A culture was prepared to be tested in the treatment of nitrate and phosphate effluent, and the role of CeO2 NPs was checked to be completely efficient after 5 days of incubation. The reduction efficiency of nitrate using sludge as inoculum source was improved up to 89.01% and 68.12% for phosphate compared to control. In the case of using wastewater as an inoculum source, the nitrate reduction was improved up to 83.30% and 87.75% for phosphate compared to control. The bacterial richness showed a significant variance (higher richness) between control and other samples. The optimal concentration of CeO2 NPs for inoculum richness and nitrate and phosphate reduction was (sludge: 1 × 10-10 ppm) and (wastewater: 1 × 10-12 ppm). The results revealed that CeO2 NPs could enhance the microbial growth of different inoculum sources that have a key role in dairy effluent nitrate and phosphate bioremediation.

Similarities and Differences in Quorum Sensing-Controlled Bioluminescence between Photobacterium phosphoreum T3 and Vibrio qinghaiensis sp.-Q67

Quorum sensing is a density-dependent mechanism using chemical signal molecules termed autoinducers to regulate diverse biological processes in bacteria, including bioluminescence. However, the correlation between growth and light emission of two typical luminescent bacteria, Photobacterium phosphoreum T3 and Vibrio qinghaiensis sp.-Q67, is still unclear. This study investigates the variations of bioluminescence and the light-emission-involved gene expression of the above two strains, respectively, showing that bioluminescence is population density-dependent. Furthermore, the effect of crude extracts (175, 350, 700 and 1750 mg/L) from the bacterial culture that contains the potential autoinducers on the bioluminescence is explored. At the exponential and the early stationary growth phase, T3 did not exhibit an obvious light intensity and cell density change after adding crude extracts at 175 and 350 mg/L, while the light intensity decreased at 700 and 1750 mg/L, showing a luminescence inhibition. For Q67, the light intensity increased dramatically with crude extract concentration. These results suggest that the bioluminescence process of both T3 and Q67 is controlled by quorum sensing. Furthermore, the different response modes of these two strains to autoinducers imply that the two strains could be applied to different compounds for toxicity assesses.

Acceleration of biofilm formation in start-up of sequencing batch biofilm reactor using carriers immobilized with Pseudomonas stutzeri strain XL-2

P. stutzeri strain XL-2 initially immobilized on polypropylene carriers accelerated the biofilm formation in start-up of sequencing batch biofilm reactor (SBBR) (denoted R1). The biofilm formation in R1 was approximately completed in 36 days, which was shorter than that of 48 days in an identical SBBR (denoted R2) without strain XL-2. Meanwhile, R1 presented a rapid stabilization of NH₄⁺-N and TN removal to 81.7% and 72.4% respectively. Surface plasmon resonance demonstrated that strain XL-2 enhanced the initial adhesion of carrier surface due to the production of extracellular polymeric substances (EPS), which made it easier for other EPS-producing strains, such as Thauera and Flavobacterium, to adhere to the carriers. PICRUSt revealed that biofilm in R1 presented relatively higher activity of EPS biosynthesis enzymes (glycosyltransferase and asparagine synthase). Thus, high EPS content was obtained due to the application of carriers immobilized with strain XL-2 and finally promoted the biofilm formation.

Hydrolyzed Ce(IV) salts limit sucrose-dependent biofilm formation by Streptococcus mutans

Several studies have focused on the antimicrobial effects of cerium oxide nanoparticles (CeO₂-NP) but few have focused on their effects on bacteria under initial biofilm formation conditions. Streptococcus mutans is a prolific biofilm former contributing to dental caries in the presence of fermentable carbohydrates and is a recognized target for therapeutic intervention. CeO₂-NP derived solely from Ce(IV) salt hydrolysis were found to reduce adherent bacteria by approximately 40% while commercial dispersions of "bare" CeO₂-NP (e.g., 3 nm, 10-20 nm, 30 nm diameter) and Ce(NO₃)₃·6H₂O were either inactive or observed to slightly increase biofilm formation under similar in vitro conditions. Planktonic growth and dispersal assays support a non-bactericidal mode of biofilm inhibition active in the initial phases of S. mutans biofilm production. Human cell proliferation assays suggest only minor effects of hydrolyzed Ce(IV) salts on cellular metabolism at concentrations up to 1 mM Ce, with less observed toxicity compared to equimolar concentrations of AgNO₃. The results presented herein have implications in clinical dentistry.

Nanoparticles for the Treatment of Oral Biofilms: Current State, Mechanisms, Influencing Factors, and Prospects

Due to their excellent size, designability, and outstanding targeted antibacterial effects, nanoparticles have become a potential option for controlling oral biofilm-related infections. However, the formation of an oral biofilm is a dynamic process, and factors affecting the performance of antibiofilm treatments are complex. As such, when examining the existing literature on the antibiofilm effects of nanoparticles, attention should be paid to the specific mechanisms of action at different stages of oral biofilm formation, as well as relevant influencing factors, in order to achieve an objective and comprehensive evaluation. This review is intended to detail the antibacterial mechanisms of nanoparticles during the four stages of the formation of oral biofilms: 1) acquired film formation; 2) bacterial adhesion; 3) early biofilm development; and 4) biofilm maturation. In addition, factors influencing the antibiofilm properties of nanoparticles are summarized from the aspects of nanoparticles themselves, biofilm models, and host factors. The limitations of current research and possible trends for future research are also discussed. In summary, nanoparticles are a promising antioral biofilm strategy. It is hoped that this review can serve as a reference and inspire ideas for further research on the application of nanoparticles for effectively targeting and treating oral biofilms.