Enhanced degradation of sulfamethoxazole by Fe-Mn binary oxide synergetic mediated radical reactions

The important role of the interaction between manganese minerals and metals in environmental remediation: a review

With illegal discharge of wastewater containing inorganic and organic pollutants, combined pollution is common and needs urgent attention. Understanding the migration and transformation laws of pollutants in the environment has important guiding significance for environmental remediation. Due to the characteristics of adsorption, oxidation, and catalysis, manganese minerals play important role in the environment fate of pollutants. This review summarizes the forms of interaction between manganese minerals and metals, the environmental importance of the interaction between manganese minerals and metals, and the contribution of this interaction in improving performance of Mn-based composite for environmental remediation. The literatures have indicated that the interactions between manganese minerals and metals involve in surface adsorption, lattice replacement, and formation of association minerals. The interaction between manganese minerals and metals plays an important role in environmental behavior of element and environmental significance of manganese minerals. The synergistic or antagonistic effect resulted from the interaction influence the purification of heavy metal and organism pollutant. The synergistic effect benefited from the coordination of adsorption and oxidation, convenient electron transfer, abundant oxygen vacancies, and fast migration of lattice oxygen. Based on the synergy, Mn-based composites have been widely used for environmental remediation. The synthesize methods of Mn-based composites mainly include homogeneous coprecipitation, chemical etching route, hydrothermal, homogeneous chelating sol-gel, and ethylene glycol reduction strategy. This review is helpful to fully understand the migration and transformation process of pollutants in the environment, expand the resource utilization of manganese minerals for environmental remediation.

Electrochemical Technologies to Decrease the Chemical Risk of Hospital Wastewater and Urine

The inefficiency of conventional biological processes to remove pharmaceutical compounds (PhCs) in wastewater is leading to their accumulation in aquatic environments. These compounds are characterized by high toxicity, high antibiotic activity and low biodegradability, and their presence is causing serious environmental risks. Because much of the PhCs consumed by humans are excreted in the urine, hospital effluents have been considered one of the main routes of entry of PhCs into the environment. In this work, a critical review of the technologies employed for the removal of PhCs in hospital wastewater was carried out. This review provides an overview of the current state of the developed technologies for decreasing the chemical risks associated with the presence of PhCs in hospital wastewater or urine in the last years, including conventional treatments (filtration, adsorption, or biological processes), advanced oxidation processes (AOPs) and electrochemical advanced oxidation processes (EAOPs).

Cu2O nanoparticles anchored on 3D bifunctional CNTs/copper foam cathode for electrocatalytic degradation of sulfamethoxazole over a broad pH range

In this paper, nanoscale Cu₂O particles was successfully anchored at defect sites of carbon nanotubes (CNTs), which doped on three-dimensional copper foam (CF) electrode (Cu₂O@CNTs/CF). The compound as cathode was synthesized via dip-coating and rapid electrodeposition followed by annealing procedure, and conducted in heterogeneous electro-Fenton (EF) system. The Cu₂O@CNTs/CF composites electrode enabled activate O₂ to generate H₂O₂ in situ and further Cu⁰/Cu₂O synergistic catalysis to produce reactive oxygen species for a broad pH-range via the heterogeneous EF process. Cu⁰ on the surface of CF also contributed to the reduction of Cu²⁺ to Cu⁺, thereby enhancing the stability of the electrode. The effects of critical parameters such as precursor-ligand dosage, the initial pH value, initial pollutant concentration and current density on the degradation of the antibiotic sulfamethoxazole (SMX) were investigated. The as-obtained electrode performed both effective catalytic activity and good reusability. Almost 100% removal rate was reached within 75 min over a broad pH range (3 to 11) during the heterogeneous EF process, with the current density of 12 mA cm^-2 and the removal efficiency of SMX decreased by only 9.0% after 8 recycle runs. Furthermore, quenching experiments indicated that hydroxyl radicals (·OH) were main species responsible for the SMX oxidation. In addition, the possible degradation pathways of SMX were proposed, which were based on nine identified intermediates. The comprehensive work is elucidated to accelerate the development of the in-situ production of H₂O₂ during the heterogeneous EF system and provide new insights to achieve high-efficiency degradation of pollutants via copper-based catalytic materials.

Recent Trends in Pharmaceuticals Removal from Water Using Electrochemical Oxidation Processes

Nowadays, the research on the environmental applications of electrochemistry to remove recalcitrant and priority pollutants and, in particular, drugs from the aqueous phase has increased dramatically. This literature review summarizes the applications of electrochemical oxidation in recent years to decompose pharmaceuticals that are often detected in environmental samples such as carbamazapine, sulfamethoxazole, tetracycline, diclofenac, ibuprofen, ceftazidime, ciprofloxacin, etc. Similar to most physicochemical processes, efficiency depends on many operating parameters, while the combination with either biological or other physicochemical methods seems particularly attractive. In addition, various strategies such as using three-dimensional electrodes or the electrosynthesis of hydrogen peroxide have been proposed to overcome the disadvantages of electrochemical oxidation. Finally, some guidelines are proposed for future research into the applications of environmental electrochemistry for the degradation of xenobiotic compounds and micropollutants from environmental matrices. The main goal of the present review paper is to facilitate future researchers to design their experiments concerning the electrochemical oxidation processes for the degradation of micropollutants/emerging contaminants, especially, some specific drugs considering, also, the existing limitations of each process.

Biodegradation inducers to enhance wheat straw pretreatment by Gloeophyllum trabeum to second-generation ethanol production

The native state of lignocellulosic biomass is highly resistant to enzymatic hydrolysis and the fermentation process of biofuel production. Brown-rot fungi use an extracellular Fenton system to degrade lignocellulosic biomass in the initial stages of decay. In this work, the combined effects of Mn²⁺, Fe²⁺, and NO₃^- inducers were evaluated based on the activities of hydrolytic enzymes and Fe³⁺ reduction as well as the catechol-type compound production during wheat straw pretreatment by the brown-rot fungus Gloeophyllum trabeum. Weight loss and chemical changes were evaluated to establish the culture conditions for stimulating wheat straw degradation using a central composite design. The results showed that weight loss and the Fe³⁺-reducing activity were promoted at the highest concentrations of Fe²⁺. A positive effect on catechol compound production by the addition of Mn²⁺ and NO₃^- was observed. Cellulase activity was increased at the highest concentration of NO₃^-. The multiple optimizations of G. trabeum culture conditions in wheat straw resulted in 11.3% weight loss and 0.47 total crystallinity index at 0.24 M NO₃^-, 0.95 mM Fe²⁺, and 0.85 mM Mn²⁺ after 40 days. The wheat straw pretreatment by G. trabeum for 10 days increased glucose recovery. The results indicated that the wheat straw pretreatment using G. trabeum with biodegradation inducers could be a complementary step to physicochemical pretreatment of lignocellulosic biomass for production of second-generation ethanol.