Technologies applicable to the removal of heavy metals from landfill leachate

Antibiotic Indexing and Heavy Metal Reduction Potential of Four Multi-metal Tolerant Bacterial Strains in Real-Time Sanitary Landfill Leachate Matrix

Sanitary leachate from urban landfills is known to be contaminated with multi-metals and residual antibiotics. Current research edges on exploring the multi-metal and antibiotic sensitivity profile of four indigenous strains, "Brevibacillus spp. Leclercia spp. Pseudescherichia spp., and Brucella spp." isolated from the leachate of a sanitary landfill in a tropical region. Indigenous isolates were observed to be antibiotic-resistant and have high tolerance against eight of the ten tested metals except Cu & Co. It was observed that interaction with multi-metals in laboratory conditions significantly altered the cell morphology of bacterial strains, as depicted by Scanning Electron Microscope. Metal adsorption onto the microbial surface was deciphered through Electron Dispersive Spectrometer analysis and elemental mapping. Application of isolated strains into real-time leachate matrix exhibits a complete reduction of Ag and Zn and for other tested metals. Their response to these toxicants may facilitate their application in bioremediation-based treatment technologies for urban landfill leachate.

Utilization of microbial fuel cells as a dual approach for landfill leachate treatment and power production: a review

Landfill leachate, which is a complicated organic sewage water, presents substantial dangers to human health and the environment if not properly handled. Electrochemical technology has arisen as a promising strategy for effectively mitigating contaminants in landfill leachate. In this comprehensive review, we explore various theoretical and practical aspects of methods for treating landfill leachate. This exploration includes examining their performance, mechanisms, applications, associated challenges, existing issues, and potential strategies for enhancement, particularly in terms of cost-effectiveness. In addition, this critique provides a comparative investigation between these treatment approaches and the utilization of diverse kinds of microbial fuel cells (MFCs) in terms of their effectiveness in treating landfill leachate and generating power. The examination of these technologies also extends to their use in diverse global contexts, providing insights into operational parameters and regional variations. This extensive assessment serves the primary goal of assisting researchers in understanding the optimal methods for treating landfill leachate and comparing them to different types of MFCs. It offers a valuable resource for the large-scale design and implementation of processes that ensure both the safe treatment of landfill leachate and the generation of electricity. The review not only provides an overview of the current state of landfill leachate treatment but also identifies key challenges and sets the stage for future research directions, ultimately contributing to more sustainable and effective solutions in the management of this critical environmental issue.

Global landfill leachate characteristics: Occurrences and abundances of environmental contaminants and the microbiome

Landfill leachates are complex mixtures containing very high concentrations of biodegradable and recalcitrant toxic compounds. Understanding the major contaminant components and microbial community signatures in global landfill leachates is crucial for timely decision-making regarding contaminant management and treatment. Therefore, this study analyzed leachate data from 318 landfill sites primarily used for municipal solid waste disposal, focusing on their chemical and microbiological characteristics. The most prevalent and dominant components in landfill leachates are the chemical oxygen demand (COD, 3.7-75.9 × 103 mg/L) and NH4+ (0.03-0.81 × 104 mg/L), followed by salt species such as SO42- (0.03-5.25 × 103 mg/L), Cl- (3.2-7.8 × 103 mg/L), K+ (0.58-4.20 × 103 mg/L), Na+ (1.3-13.0 × 103 mg/L) and Ca2+ (2.35-230.23 × 103 mg/L), which exhibit significant fluctuations. Heavy metals and metalloids are widely distributed in most landfill leachates but at relatively low concentrations (<182.8 mg/L) compared to conventional parameters. Importantly, there is a distinct global variation in the occurrence of emerging environmental contaminants (ECs). Among these compounds, perfluorooctanoic acid (PFOA, 0.02-7.50 × 103 μg/L) of per- and poly-fluoroalkyl substances (PFAS), bisphenol A (BPA, 0.01-33.46 × 103 μg/L) belonged to endocrine-disrupting compounds (EDCs), together with di-ethyltoluamide (DEET, 1.0-1.0 × 103 μg/L) affiliated to pharmaceuticals and personal care products (PPCPs) are the most frequently detected in landfill leachates. Additionally, the microbial community compositions in most leachates are primarily dominated by Proteobacteria, Bacteroidota, Firmicutes, and Chloroflexi, and some of their abundances are correlated with the concentrations of NH4+, NO3-, Cl-, Na+ and Cr. Notably, the leading microbes driving advanced removal of inorganic nitrogen in the treatment systems are Candidatus Brocadia (anammox), denitrifying Thauera, nitrite-oxidizing bacteria Nitrospira, along with ammonia-oxidizing bacteria Nitrosomonas and Nitrosospira. The findings of this work provide a deeper insight into the leachate characteristics and the sustainable management of landfill leachates, especially presenting a snapshot of the global distribution of pollutants and also the microbiome.

Pathogens and antibiotic resistance genes during the landfill leachate treatment process: Occurrence, fate, and impact on groundwater

Landfill leachate is an essential source of pathogens and antibiotic resistance genes (ARGs) in the environment. However, information on the removal behavior of pathogens and ARGs during the leachate treatment and the impact on surrounding groundwater is limited. In this study, we investigated the effects of leachate treatment on the removal of pathogens and ARGs with metagenomic sequencing, as well as the impact of landfill effluent on groundwater. It is shown that the leachate treatment could not completely remove pathogens and ARGs. Twenty-nine additional pathogens and twenty-nine ARGs were newly identified in the landfill effluent. The relative abundance of pathogens and multiple antibiotic resistance genes decreased after ultrafiltration but relative abundance increased after reverse osmosis. In addition, the relative abundances of Acinetobacter baumannii, Erwinia amylovora, Escherichia coli, Fusarium graminearum, Klebsiella pneumoniae, and Magnaporthe oryzae, as well as mdtH, VanZ, and blaOXA-53 increased significantly in the landfill effluent compared to the untreated leachate. The relative abundance of some mobile genetic elements (tniA, tniB, tnpA, istA, IS91) in leachate also increased after ultrafiltration and reverse osmosis. The size of pathogens, the size and properties of ARGs and mobile genetic elements, and the materials of ultrafiltration and reverse osmosis membranes may affect the removal effect of pathogens, ARGs and mobile genetic elements in leachate treatment process. Interestingly, the pathogens and ARGs in landfill effluent were transferred to groundwater according to SourceTracker. The ARGs, mobile genetic elements, and pathogens that are difficult to remove in the leachate treatment process, provide a reference for optimizing the leachate treatment process and improving the control of pathogens and ARGs. Furthermore, this study clarifies the effect of landfill leachate sources of pathogens and ARGs in groundwater.

Physical and chemical characterization and pollution index applied in the assessment of the polluting potential of leachate from urban landfills

During the operation of the landfills, leachate should be managed with caution to avoid possible negative environmental impacts. Considering this, the present study aims to evaluate the relationship between different variables in the leachate composition and elucidate the transformation processes through which this effluent passes during the landfill's period of operation. The study was conducted with eight sanitary landfills from the state of Minas Gerais, in southeastern Brazil, and used descriptive statistical analysis, principal component analysis (PCA), correlation analysis, and calculation of the leachate pollution index (LPI). The biochemical oxygen demand (BOD5)/chemical oxygen demand (COD) ratio was between 0.20 and 0.60. We also observed a significant correlation of 0.45 between Cl- and N-NH4+, which reflects the biological degradation processes that contribute to the presence of both variables. The PCA showed that inorganic variables and organic matter dominated the first component, with coefficients above 0.65, indicating the importance of those variables in determining the general data variability. The LPI values were between 15.26 and 25.97, with BOD5, COD, and N-NH4+ having sub-indexes above 35, being the main variables that increase the pollution potential of the leachate. On the other hand, trace metals present sub-indexes below 7 due to precipitation caused by increased pH and the characteristics of the waste discarded in landfills. The study provides essential information regarding the landfill leachate characteristics and its variation over time, which can contribute to the definition of treatment technologies for this affluent in different scenarios.

Nutrient recovery from municipal solid waste leachate in the scope of circular economy: Recent developments and future perspectives

Holistically considering the current situation of the commercial synthetic fertilizer (CSF) market, recent global developments, and future projection studies, dependency on CSFs in agricultural production born significant risks, especially to the food security of foreign-dependent countries. The foreign dependency of countries in terms of CSFs can be reduced by the concepts such as the circular economy and resource recovery. Recently, waste streams are considered as a source in order to produce recovery-based fertilizers (RBF). RBFs produced from different waste streams can be substituted with CSFs as input for agricultural applications. Municipal solid waste leachate (MSWL) is one of the waste streams that have a high potential for RBF production. Distribution of the published papers over the years shows that this potential was noticed by more researchers in the millennium. MSWL contains a remarkable amount of nitrogen and phosphorus which are the main nutrients required for agricultural production. These nutrients can be recovered with many different methods such as microalgae cultivation, chemical precipitation, ammonia stripping, membrane separation, etc. MSWL can be generated within the different phases of municipal solid waste (MSW) management. Although it is mainly composed of landfill leachate (LL), composting plant leachate (CPL), incineration plant leachate (IPL), and transfer station leachate (TSL) should be considered as potential sources to produce RBF. This study compiles studies conducted on MSWL from the perspective of nitrogen and phosphorus recovery. Moreover, recent developments and limitations of the subject were extensively discussed and future perspectives were introduced by considering the entire MSW management. Investigated studies in this review showed that the potential of MSWL to produce RBF is significant. The outcomes of this paper will serve the countries for ensuring their food security by implementing the resource recovery concept to produce RBF. Thus, the risks born with the recent global developments could be overcome in this way besides the positive environmental outcomes of resource recovery.

Composite hydrogel based on alginate-g-poly(acrylamide)/carbon nanotubes for solid phase extraction of metals from corn cereal samples

Composite hydrogels containing nanofillers are extensively applied in the sorption of different compounds from aqueous solutions; however, this ability is poorly exploited in the extraction and pre-concentration of analytes from complex matrices. As a contribution to this field, this study reports the synthesis of a composite hydrogel of alginate-g-poly(acrylamide) matrix filled with functionalized multi-walled carbon nanotubes (ALG-g-PAAM/MWCNT-f). This composite served as a solid-phase extractor (SPE) for the separation of Pb²⁺ and Cd²⁺ ions from a digested corn cereal sample before their analytical determination. After composite characterization, a series of experiments using low dosages of ALG-g-PAAM/MWCNT-f demonstrated that the composite has a higher sorption capacity for Pb²⁺ (5.1 mg/g) and Cd²⁺ (3.9 mg/g) under favorable experimental conditions. As demonstrated, the presence of the MWCNT-f benefited the SPE performance of the composite. The sorption of both cations followed the pseudo-first order kinetics, while the experimental data were well-fitted by the Freundlich isotherm. Also, ALG-g-PAAM/MWCNT-f showed selectivity for Pb²⁺, and it is reusable up to 10 times without losing sorption performance. After sorption and extraction, both metals were completely recovered, facilitating their quantification by the MIP OES technique. In short, ALG-g-PAAM/MWCNT-f was an effective SPE for the separation and extraction of Pb²⁺ and Cd²⁺, which can be beneficial for food control and safety.

Characteristics and pollution potential of leachate from municipal solid waste landfills: Practical examples from Poland and the Czech Republic and a comprehensive evaluation in a global context

The formation of leachate is mainly due to the percolating of rainwater through the body of the landfill and the physical, chemical, and biological processes taking place inside the body of the landfill. The characteristics and pollution potential of leachate from the municipal solid waste (MSW) landfills in Poland (Łubna) and the Czech Republic (Zdounky) is presented. The objectives of this study are: 1) to evaluate and compare physicochemical characteristics of leachate, 2) to demonstrate the variability of leachate parameters in time, concerning stabilization phase of the landfill, 3) to present existing relationships between the characteristics of the leachate, 4) to indicate the factors determining the variability of the leachate composition. The Leachate Pollution Index (LPI) was applied to indicate temporal changes in leachate pollution, to assess polluting ability of leachate, and to compare the pollution potential of leachate. For the Łubna landfill, the minimum, maximum, and average values of LPI were: 6.10, 39.41, and 18.44, respectively. The LPI for the Łubna landfill tends to decrease in time due to stabilization of wastes. For the Zdounky landfill, temporal decreasing of LPI was not observed. The minimum, maximum, and average values of LPI were: 6.25, 14.25, and 10.11, respectively. Alkaline characteristics of leachate from both landfills indicate the mature stage of waste storage. This phenomenon was also evidenced by the Chemical Oxygen Demand (COD), ammonium (NH₄⁺), and cadmium (Cd). For both landfills, pH was negatively correlated with most of the leachate parameters. It is the task for environmental engineers to confront existing knowledge (supplemented by the results of this work) about the properties of leachate, its changes over time and its polluting potential with the possibilities of treating and managing it properly.

Concentration of heavy metals in leachate, soil, and plants in Tehran's landfill: Investigation of the effect of landfill age on the intensity of pollution

Heavy metals are one of the important pollutants in landfill leachate. Plants and soil near the landfill may be contaminated by leachate. In this study, by evaluating the heavy metals in the leachate of two landfills and the soil and plants near them, the amount of pollution caused by the leachate in the environment around the landfills in Tehran was investigated. This study was conducted in three stations, soil and plant samples were prepared according to a specific protocol. Also, three indexes including PI, PI_Nemerow, and BF were used to interpret the results. The results showed that the concentration of total metals in the old landfill leachate and new landfill leachate was only 12% different and was 24.13 mg/L on average. In the new landfill leachate, iron had the highest concentration among metals, which was 22.94 and 17.01 mg/L in two samples. In the old landfill leachate, the concentration of manganese was 15.71 mg/L, which was the highest among the studied metals. The concentration of heavy metals in the soil of the old landfill was 24.6% lower than the concentration of metals in the soil of the new landfill. In all samples, the highest metal concentration in the soil was related to manganese, which was 33.65-34.14 mg/L. Cadmium had the lowest concentration in soil compared to other metals. The concentration of total metals in the studied plants was 29-60 ppm. The PInemerow for studied stations was 0.1711, 0.1708, and 0.1463. The highest PI in the case of lead was observed at the second station equal to 0.54. The highest BF in case of Atriplex Undulata was more than 6 and related to cadmium, while the highest BF in case of Atriplex Cinearea was more than 3.5 related to cadmium. This study showed that the soil and plants of the landfill were contaminated with heavy metals under the influence of leachate, and the ability of plants to uptake and accumulate metals can be used to manage soil pollution near the landfill.

Insights into the Synergistic Removal of Copper(II), Cadmium(II), and Chromium(III) Ions Using Modified Chitosan Based on Schiff Bases-g-poly(acrylonitrile)

Chitosan has received broad consideration as an adsorbent for all pollutants because of its low cost and great adsorption potential. However, its shortcomings, including sensitivity to pH, poor thermal stability, and poor mechanical strength, limit its use. The functional groups of chitosan can be modified to enhance its performance by the grafting technique and Schiff base modification. The grafting process used acrylonitrile (Ch-g-PAN) as a monomer and potassium persulfate as an initiator. After that, the modification via preparation of the Schiff base reaction using salicylaldehyde (Ch-g-Sch I) and P-anisaldehyde (Ch-g-Sch II) was carried out. The synthesized copolymers were detailed and characterized through several spectroscopic and microscopic techniques including infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. In addition, Ch-g-Sch I and Ch-g-Sch II were applied in the removal of different metal ions such as Cu²⁺, Cd²⁺, and Cr³⁺. The maximum adsorption capacity of Ch-g-Sch I for Cd²⁺ was 183.7 mg g^-1 in 24 h, while in the case of Ch-g-Sch II, the maximum adsorption capacity for Cd²⁺ was improved to 322.9 mg g^-1 for the same time. Moreover, adsorption thermodynamic analysis displays that the all ion adsorption process was not random and the pseudo-second-order model fitted with experimental results. Finally, Ch-g-Sch I and Ch-g-Sch II were applied as designs for industrial wastewater treatment with significant efficiency.

PCDD/Fs and heavy metals in the vicinity of landfill used for MSWI fly ash disposal: Pollutant distribution and environmental impact assessment

This study focused on the syngenetic control of polychlorinated-ρ-dibenzodioxins and dibenzofurans (PCDD/Fs) and heavy metals by field stabilization/solidification (S/S) treatment for municipal solid waste incineration fly ash (MSWIFA) and multi-step leachate treatment. Modified European Community Bureau of Reference (BCR) speciation analysis and risk assessment code (RAC) revealed the medium environment risk of Cd and Mn, indicating the necessity of S/S treatment for MSWIFA. S/S treatment significantly declined the mass/toxic concentrations of PCDD/Fs (i.e., from 7.21 to 4.25 μg/kg; from 0.32 to 0.20 μg I-TEQ/kg) and heavy metals in MSWIFA due to chemical fixation and dilution effect. The S/S mechanism of sodium dimethyldithiocarbamate (SDD) and cement was decreasing heavy metals in the mild acid-soluble fraction to reduce their mobility and bioavailability. Oxidation treatment of leachate reduced the PCDD/F concentration from 49.10 to 28.71 pg/L (i.e., from 1.60 to 0.98 pg I-TEQ/L) by suspension absorption or NaClO oxidation decomposition, whereas a so-called "memory effect" phenomena in the subsequent procedures (adsorption, press filtration, flocculating settling, slurry separation, and carbon filtration) increased it back to 38.60 pg/L (1.66 pg I-TEQ/L). Moreover, the multi-step leachate treatment also effectively reduced the concentrations of heavy metals to 1-4 orders of magnitude lower than the national emission standards. Furthermore, the PCDD/Fs and heavy metals in other multiple media (soil, landfill leachate, groundwater, and river water) and their spatial distribution characteristics site were also investigated. No evidence showed any influence of the landfill on the surrounding liquid media. The slightly higher concentration of PCDD/Fs in the soil samples was ascribed to other waste management processes (transportation and unloading) or other local source (hazardous incineration plant). Therefore, proper management of landfills and leachate has a negligible effect on the surrounding environment.

Development of nitric acid-modified activated carbon electrode for removal of Co2+/Mn2+/Ni2+ by electrosorption

In this paper, nitric acid-modified activated carbon was used as an electrode in the electrosorption process for the removal of Co²⁺, Mn²⁺, and Ni²⁺ from wastewater. The effects of applied voltage, initial pH, and coexisting ions on removal efficiency were investigated. The adsorption process was evaluated by adsorption isotherm models. The results indicated that the electrosorption process was consistent with the Langmuir model, proving that the electrosorption process was a monolayer adsorption process. The maximum adsorption capacities of Co²⁺, Mn²⁺, and Ni²⁺ were 131.58 mg/g, 102.04 mg/g, and 103.09 mg/g. Electrochemical tests revealed that the specific capacitance of AC-HNO₃ was 54.11 F/g when the scanning rate was 5 mV/s, while the specific capacitance of AC was 36.51 F/g. The Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that the content of oxygen groups on the surface of activated carbon increased after modification, which provided more adsorption sites for electrosorption. When the selected concentration of HCl was used as the eluent, the elution efficiency of Co²⁺, Mn²⁺, and Ni²⁺ could reach 94.23%, 93.65%, and 90.61%. The removal efficiency could reach more than 95% after three cycles. The results of the study can be used as a reference significance for the removal of cobalt, manganese, and nickel ions from heavy metal wastewater by electrosorption.

Future trends and patterns in leachate biological treatment research from a bibliometric perspective

Leachate has become a great deal of concern due to its complex properties which are primarily caused by the high concentrations of organics and ammonia. Thus, proper leachate treatment is required prior to its discharge. Leachate can be treated in various ways, and biological treatment is one of the approaches. This treatment has been shown to be both effective and cost-efficient while offering the possibility of resource recovery in the form of bioenergy. In this study, the underlying patterns in publications related to leachate biological treatment were uncovered through bibliometric analysis. This study also lays the groundwork for a deeper understanding of the past, current, and future trends of the leachate biological treatment. Research publications from 1974 to 2021 were retrieved from the Scopus database, and it was identified that 2013 articles were published in the span of 47 years. From the analyzed publications, China played a leading role in publishing leachate biological treatment research articles as well as having the most productive institutions and authors. Meanwhile, the USA was found to be the most active country in initiating international collaborations with 33 countries. The research hotspots were also successfully identified using keyword co-occurrences analysis. Anaerobic digestion and constructed wetland were revealed to be the research hotspots. The critical role of biological treatment in removing nitrogen from leachate was also highlighted. Besides, numerous research gaps were identified in the application of aerobic granular sludge (AGS) for leachate treatment. This can be a potential area for research in the future. Finally, future research should be encouraged to focus on the use of sustainable treatment systems in which energy recovery in the form of biogases is promoted.

Advancements of sequencing batch reactor for industrial wastewater treatment: Major focus on modifications, critical operational parameters, and future perspectives

Industrial wastewater discharge has increased manifolds over the last few decades. Efficient industrial wastewater treatment is mandatory to meet stringent discharge regulations. Biological treatment systems, such as the sequencing batch reactor (SBR) are generally employed for domestic wastewater treatment. However, low infrastructure and energy requirements, as well as low footprint, make SBR a prominent technique to treat industrial wastewater. In the present review, the feasibility of SBR to treat wastewater generated from industries, such as textile, pulp and paper, pharmaceutical, tannery, etc., has been discussed. The factors affecting the treatment efficacy of the SBR in terms of organics and nutrient removal have also been investigated. It has been observed that the SBR system is effective for industrial wastewater treatment as it is easy to operate, resistant to shock loads, and can retain high biomass concentrations. The modifications to the conventional SBR, such as sludge granulation, the addition of bio-film carriers, and the incorporation of adsorbents, salt-tolerant microbes, and coagulants have been discussed. Further, various novel combinations of SBR with the other advanced treatment technologies, such as Fenton, membrane-based process, and electrochemical process have shown enhanced removal of various conventional and recalcitrant pollutants. The current review also accentuates the sustainability aspects of SBR technology to treat industrial wastewater which may be beneficial for researchers and engineers working in this field.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Microbial biominers: Sequential bioleaching and biouptake of metals from electronic scraps

Electronic scraps (e-scraps) represent an attractive raw material to mine demanded metals, as well as rare earth elements (REEs). A sequential microbial-mediated process developed in two steps was examined to recover multiple elements. First, we made use of an acidophilic bacteria consortium, mainly composed of Acidiphilium multivorum and Leptospidillum ferriphilum, isolated from acid mine drainages. The consortium was inoculated in a dissolution of e-scraps powder and cultured for 15 days. Forty-five elements were analyzed in the liquid phase over time, including silver, gold, and 15 REEs. The bioleaching efficiencies of the consortium were >99% for Cu, Co, Al, and Zn, 53% for Cd, and around 10% for Cr and Li on Day 7. The second step consisted of a microalgae-mediated uptake from e-scraps leachate. The strains used were two acidophilic extremotolerant microalgae, Euglena sp. (EugVP) and Chlamydomonas sp. (ChlSG) strains, isolated from the same extreme environment. Up to 7.3, 4.1, 1.3, and 0.7 µg by wet biomass (WB) of Zn, Al, Cu, and Mn, respectively, were uptaken by ChlSG biomass in 12 days, presenting higher efficiency than EugVP. Concerning REEs, ChlSG biouptake 14.9, 20.3, 13.7, 8.3 ng of Gd, Pr, Ce, La per WB. Meanwhile, EugVP captured 1.1, 1.5, 1.4, and 7.5, respectively. This paper shows the potential of a microbial sequential process to revalorize e-scraps and recover metals and REEs, harnessing extremotolerant microorganisms.

Passivation of multiple heavy metals in lead-zinc tailings facilitated by straw biochar-loaded N-doped carbon aerogel nanoparticles: Mechanisms and microbial community evolution

Heavy metal (HM) soil pollution has become an increasingly serious problem with the development of industries. Application of biochar in HMs remediation from contaminated environment has attracted considerable research attention during the past decade. Although the mechanism of HMs passivation with biochar has been investigated, effects and mechanisms of interaction among soil-indigenous microbes and novel carbon matrix composites for HMs adsorption and passivation are still unclear. Four different biochar-loaded aerogels, namely, BNCA-1-600, BNCA-1-900, BNCA-2-600, and BNCA-2-900, were synthesized in this study. Adsorption capacity of four kinds of synthetic materials and two types of contrast biochars (BC600 and BC900) to HMs in aqueous solution, passivation capacity of HMs in soil, and effects on soil organic matter and microbial community were explored. Results showed that BNCA-2-900 exhibits excellent adsorption property and a maximum removal capacity of 205.07 mg·g^-1 at 25 °C for Pb(II), 105.56 mg·g^-1 for Cd(II), and 137.89 mg·g^-1 for Zn(II). Leaching concentration of HMs in contaminated soil can meet the national standard of China (GB/T 5085.3-2007) within 120 days. Results of this study confirmed that the additive BNCA-2-900 and coexistence of indigenous microorganisms can effectively reduce bioavailability of HMs. Another potential mechanism may be to remove the passivation of HMs by porous structure and surface functional groups as well as improve the content of organic matter and microbial abundance. The research results may provide a novel perceptive for the development of functional materials and strategies for eco-friendly and sustainable multiple HMs remediation in contaminated soil and water by using a combination of carbon matrix composites and soil-indigenous microorganisms.

Green construction of eco-friendly phosphotungstic acid Sr-MOF catalysts for crystal violet removal and synthesis of coumarin and xanthene compounds

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes. This reduces the contamination of toxic chemicals and helps the disposal of organic dyes. In the current work, a metal–organic framework-based Sr(ii) was fabricated to achieve the desired goal for dye removal and catalysis. Sr-MOF-based phosphotungstic acid (PWA/Sr-MOF) was hydrothermally synthesized to study its adsorption and catalytic activities. Remarkably, about 99.9% of crystal violet (CV) dye was removed using PWA/Sr-MOF within 90 min at room temperature. Various factors have been studied to investigate the optimum conditions such as pH of solution, initial dye concentration, contact time, and temperature. The maximum adsorption capacity of CV dye was reached after 90 min and well fitted the pseudo-second kinetic order and Langmuir adsorption isotherm. Coumarin and xanthene reactions were chosen to test the catalytic activity of the prepared PWA/Sr-MOF at 373 K. Furthermore, structural and chemical characterization of the fabricated samples was obtained using FT-IR, XRD, TGA, DTA, TEM, EDX, and XPS. PWA/Sr-MOF can be considered as a promising and green framework in the material design used to study catalytic and adsorption performances.

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes.

Characterization and photodegradation pathway of the leachate of Matuail sanitary landfill site, Dhaka South City Corporation, Bangladesh

This study was carried out to characterize the biogeochemical and physicochemical properties of landfill leachate from Matuail Sanitary landfill site, Dhaka, Bangladesh. In addition, the study also aimed to identify the photodegradation of landfill leachate under natural sunlight. The leachate pH was slightly alkaline (7.87–8.07) with a minimum level of dissolved oxygen, and low BOD₅/COD ratio that are indicators of the matured methanogenic phase. Ca, Fe, Br, Rb, Cu was present in a considerable amount. A trace amount of Sr, Co, As, Pb, Cr was found in the leachate sample. Fourier Transform - infrared (FTIR) spectra of all three samples had five major peak regions notably at 3440–3450 cm⁻¹ (O–H groups of water), 1638 cm⁻¹ (C=O Amide I, carboxylates C=C, aromatic ring modes, or alkenes), 1385–1390 cm⁻¹ (deformation of the C–H bond in CH₂ and CH₃, or the asymmetric stretching of COO¯), 1115 cm⁻¹ (stretching of the C–O bond in phenol ethers and phenols) and 605 cm⁻¹ (S–O bends of sulfates). In addition to the appearance of new peak, peak shifting on the 2^nd-day and 5^th-day phototreatment are in compliance with the 34% TOC reduction. From analyzing three-dimensional excitation/emission (3D-EEM) spectra of the raw sample pyrene-like or humic-like peak A (Ex 255/Em 465), soil fulvic-like peak M_p (Ex 315/Em 450), and humic-like peak C (Ex 370/Em 455) was found indicating more humified characteristics of the mature landfill site. From 1-hour to 6-hours phototreatment, all three substances slightly lost fluorescence intensity. From the 2^nd day to the 5^th day of photo-treatment, two unknown photo-product was identified within Ex 210/Em 457 and Ex 205/Em 408 at peak A region. Fluorescence intensity lost was 65% for peak A and 44% for peak C. Soil fulvic-like peak M_p was absent on the 5^th day of photo-treatment.

Characterization and treatment of landfill leachate: A review

Landfill leachate is a complicated organic wastewater generated in the sanitary landfilling process. Landfill leachate must be appropriately disposed to avoid ecotoxicity and environmental damage. An in depth understanding of the physiochemical characteristics and environmental behaviors of landfill leachate is essential for its effective treatment. In this study, recent advances on the properties of landfill leachate, its characterization methods and treatment techniques are critically reviewed. Specifically, the up-to-date spectroscopic techniques for landfill leachate characterization and advanced oxidation treatment techniques are highlighted. Moreover, the drawbacks and challenges of current techniques for landfill leachate characterization and treatment are discussed, along with the future perspectives in the development of characterization and treatment approaches for landfill leachate.

Ecofriendly remediation technologies for wastewater contaminated with heavy metals with special focus on using water hyacinth and black tea wastes: a review

Treatment of water contaminated with heavy metals is challenging. Heavy metals are non-degradable, persistent in the environment, have a high dispersion capacity by water, can bioaccumulate, and represent risks to human and environmental health. Conventional treatment methods have disadvantages; however, adsorption in biomass is a highly promising method with high efficiency and low cost that avoids many of the disadvantages of conventional methods. Black tea (BT) wastes and water hyacinth (WH) have attracted attention for their ability to remove heavy metals from wastewater. Utilizing these approaches can remove contaminants and effectively manage problematic invasive species and wastes. The conventional uses of BT and WH were efficient for removing heavy metals from wastewater. Due to the unique and distinct properties and advantages of biochar and nano-forms of biosorbents, the use of BT and WH in these forms is promising to achieve sustainable heavy metals removal from wastewater. However, more study is needed to confirm preliminary results.

The use of Phanerochaete chrysosporium for modification of bentonite for preconcentration and determination of heavy metals

In this study, a solid phase extraction method was successfully applied in the preconcentration and determination of trace levels of Cu(II) and Cd(II) ions and Phanerochaete chrysosporium (white rot fungus) modified bentonite was used as adsorbent. After the biosorption of Cu(II) and Cd(II) ions, metal concentrations in the samples were determined by atomic absorption spectrophotometry. pH, adsorbent amount, eluent type, sample volume, and flow rate, which are effective in the adsorption of metal ions, have been studied. 1 M HCl was used for desorption of these metal ions retained (recovery 95–100%). In addition, the effect of interfered ions has also been investigated. Sorption data were examined according to Langmuir and Freundlich adsorption equations. The results obtained show that the applied method has a high metal biosorption capacity, and Cu(II) and Cd(II) ions are successfully recovered. It was also successful in applying the proposed enrichment method to real water samples.

Recovery values between 92.3% and 97.3% were obtained for the studied metal ions. According to the results, the proposed method can be successfully applied to water analysis at 95% confidence interval.

Donnan Membrane Process for the Selective Recovery and Removal of Target Metal Ions-A Mini Review

Membrane-based water purification technologies contribute significantly to water settings, where it is imperative to use low-cost energy sources to make the process economically and technically competitive for large-scale applications. Donnan membrane processes (DMPs) are driven by a potential gradient across an ion exchange membrane and have an advantage over fouling in conventional pressure driven membrane technologies, which are gaining attention. DMP is a removal, recovery and recycling technology that is commonly used for separation, purification and the concentrating of metals in different water and waste streams. In this study, the principle and application of DMP for sustainable wastewater treatment and prospects of chemical remediation are reviewed and discussed. In addition, the separation of dissolved metal ions in wastewater settings without the use of pressure driven gradients or external energy supply membrane technologies is highlighted. Furthermore, DMP distinctive configurations and operational factors are explored and the prospects of integrating them into the wastewater treatment plants are recommended.

Efficient removal of heavy metals from polluted water with high selectivity for Hg(ii) and Pb(ii) by a 2-imino-4-thiobiuret chemically modified MIL-125 metal-organic framework

A highly porous adsorbent based on a metal-organic framework was successfully designed and applied as an innovative adsorbent in the solid phase for the heavy metal removal. MIL-125 was densely decorated by 2-imino-4-thiobiuret functional groups, which generated a green, rapid, and efficacious adsorbent for the uptake of Hg(ii) and Pb(ii) from aqueous solutions. ITB-MIL-125 showed a high adsorption affinity toward mercury(ii) ions of 946.0 mg g-1 due to covalent bond formation with accessible sulfur-based functionality. Different factors were studied, such as the initial concentration, pH, contact time, and competitive ions, under same circumstances at the room temperature. Moreover, the experimental adsorption data were in excellent agreement with the Langmuir adsorption isotherm and pseudo-second order kinetics. At a high concentration of 100 ppm mixture of six metals, ITB-MIL-125 exhibited a high adsorption capacity, reaching more than 82% of Hg(ii) compared to 62%, 30%, 2%, 1.9%, and 1.6% for Pb(ii), Cu(ii), Cd(ii), Ni(ii), and Zn(ii), respectively.

Anaerobic co-digestion of landfill leachate and acid mine drainage using up-flow anaerobic sludge blanket reactor

A laboratory-scale up-flow anaerobic sludge blanket (UASB) reactor was developed and constructed for the treatment of landfill leachate and acid mine drainage (AMD). The removal of chemical oxygen demand (COD), sulfate, and metal ions was studied. The maximum COD and sulfate removal efficiency reached 75% and 69%, respectively, during the start-up phase of the UASB. The hydraulic retention time (HRT) had a significant influence on the system. The maximum removal efficiency for COD and sulfate reached 83% and 78%, respectively, at an HRT of 20 h. The methane production process competed with the sulfate reduction process in the UASB. The fractionation of metals in the sludge was analyzed to facilitate metal recovery in a later processing stage. The most abundant sulfate-reducing bacteria was Desulfobulbus, and the methanogen archaeal community in the reactor was mainly composed of Methanobacterium.

Biosorption of copper by immobilized biomass of Aspergillus australensis. Effect of metal on the viability, cellular components, polyhydroxyalkanoates production, and oxidative stress

Heavy metals are toxic especially when they are introduced into the environment due to anthropogenic activities such as metallurgy, mining, and tanning. Removing these pollutants has become a worldwide concern since they cannot be degraded into nontoxic forms causing extended effects in the ecosystems. The use of an Aspergillus australensis was evaluated in order to remove Cu²⁺ from simulated wastewater. The fungus was isolated from river sludges contaminated with heavy metals and was first evaluated for the determination of Cu²⁺ tolerance levels. Microscopic fluorescence analysis was carried out to determine the effect of Cu²⁺ presence on the viability, cellular components, polyhydroxyalkanoates production, and oxidative stress of the fungus, as a response to the stress caused by exposure to metal. In order to achieve copper removal, the A. australensis biomass was produced using batch cultures, and the mycelium was immobilized on a textile media in order to compare the copper-removal efficiency of live or dead biomass. The optimal values of pH and temperature for biomass production were established by using a surface response analysis. Live immobilized biomass was capable of removing Cu²⁺ from 1.54 ± 0.19 to 2.66 ± 0.26 mg of copper/ g of dry biomass, while values of 1.93 ± 0.03 to 2.36 ± 0.29 mg of copper/g of dry biomass were observed when dead biomass was used. As was expected, copper removal using biomass varied depending on the pH and temperature used.