Characteristic and mechanism of sorption and desorption of benzene on humic acid

Three-birds-with-one-stone: An eco-friendly and renewable humic acid-derived material application strategy for macrolide antibiotic detection and multifunctional composite film preparation

This research proposes a simple and novel strategy for the green detection of antibiotics along with the reduction of microplastic and humic acid (HA) hazards. The entire process is based on a single-step solvent-sieving method to separate HA into insoluble (IHA) and soluble (SHA) components, subsequently recombining and designing the application according to the original characteristics of selected fractions in accordance with the zero-waste principle. IHA was applied as a dispersive solid phase extraction (DSPE) sorbent without chemical modification for the enrichment of trace MACs in complex biological matrices. The recovery of MACs was 74.06-100.84 % in the range of 2.5-1000 μg∙kg-1. Furthermore, SHA could be combined with biodegradable polyvinyl alcohol (PVA) to prepare multifunctional composite films. SHA endows the PVA film with favorable mechanical properties, excellent UV shielding as well as oxidation resistance performance. Compared with pure PVA, the tensile strength, toughness, antioxidant and UV-protection properties were increased to 157.3 Mpa, 258.6 MJ·m-3, 78.6 % and 60 % respectively. This study achieved a green and economically valuable utilization of all components of waste HA, introduced a novel approach for monitoring and controlling harmful substances and reducing white pollution. This has significant implications for promoting sustainable development and recovering valuable resources.

Influence of organic matters on the adsorption-desorption of 1,2-dichloroethane on soil in water and model saturated aquifer

1,2-Dichloroethane (1,2-DCA) is a typical organic chlorinated compound largely utilized in chemical manufacturing and industrial production and also a common pollutant in organically contaminated sites. The adsorption of 1,2-DCA on soil grains significantly influences its environmental fate and removal process. This study investigated the influence of fulvic acid (FA) and humic acid (HA) on the adsorption-desorption of 1,2-DCA in solid-liquid interfaces in water or constructed porous media. Experimental findings demonstrated the influence of organic matter on the adsorption of 1,2-DCA at the solid-water interface. 1,2-DCA adsorption increased in the FA or HA-treated soils when organic matter was present on the solid surfaces. The 1,2-DCA adsorption in the mixture of FA and HA was slightly lower than that in single organic acids, depending on the binding of FA and HA to the soil grains/colloids. Basic conditions reduced the adsorption of 1,2-DCA on soils, whereas acidic conditions enhanced adsorption due to the increased interactions via adsorption sites and hydrogen bonds. Conversely, the presence of organic matter in solutions (liquid phase in constructed porous media) will reduce the adsorption of 1,2-DCA on solid surfaces and increase the transport in the model aquifer. The combination of FA, HA, and rhamnolipids is helpful for the removal of 1,2-DCA from solid surfaces. Additionally, because of the enhanced desorption, the risk of 1,2-DCA contamination in groundwater can be increased when the organic matter or surfactant is present in the liquid phase if the eluent is not collected. This study helps to better understand the cooperative interaction of soil organic matter and chlorinated hydrocarbons at solid-water interfaces and the environmental fate and potential removal strategies of chlorinated hydrocarbons in contaminated sites.

BTEX and PAH contributions to Lake Kinneret water: a seasonal-based study of volatile and semi-volatile anthropogenic pollutants in freshwater sources

Benzene , toluene, ethylbenzene, and xylenes (BTEX) BTEX molecules are toxic components, ubiquitous in the environment, often found in concentrations- a few orders of magnitude higher than the well-studied PAHs levels. This fact is demonstrated in either crude oil, fuels, water, and air samples. BTEX studies focus mainly on the airborne levels of these molecules, while their waterborne presence is understudied. In this study, BTEX levels were assessed at Lake Kinneret, Israel. As a result, 0-1.5 ppb of BTEX was recorded in five stations (2021-2022). Elevated BTEX levels (3-10 ppb) were recorded at the northern rivers nourishing this lake, implying the existence of remote polluting sources. Transect air samplings of BTEX conducted at the lake next to the bathing season of 2021 revealed airborne BTEX levels between 0.8 and 10 µg/m³, peaking up close to the bathing season, yet inconsistent with the BTEX water level trend. Lake water samples collected next to Tiberias city outfalls following the "Carmel" rainstorm showed elevated concentrations of BTEX up to 35 ppb and PAHs up to 0.47 ppb with an urban isotopic signal. The remote station's PAHs levels were less than one order of magnitude, with a distinct rural isotopic signal. Additionally, a human-specific microbial marker revealed increased sewer contributions at some of the urbansites. The results of this study show that a wide area dispersion of low atmospheric BTEX levels exists in the lake's perimeter. The dispersion rate is most likely influenced by season-based factors, e.g., motors and biomass fires. The unstudied waterborne BTEX levels in this lake are influenced by rivers, city runoff, and other yet unknown factors that may contribute to the sedimentation of these components. This process may result in a chronic pollution state. Despite the BTEX's medium-low solubility and high volatility, its under-evaluated waterborne transportation may lead to high toxic levels following bioaccumulation.

Humic substances derived from unconventional resources: extraction, properties, environmental impacts, and prospects

Humic substances comprise up to 70% of the total organic matter in soils, between 50 and 80% of the dissolved organic matter in water, and about 25% of dissolved organic matter in groundwater. Elucidation of the complex structure and properties of humic substances requires advanced analytical tools; however, they are of fundamental importance in medicine, agriculture, technology, and the environment, at large. Although they are naturally occurring, significant efforts are now being directed into their extraction owing to their relevance in improving soil properties and other environmental applications. In the present review, the different fractions of humic substances were elucidated, underlying the mechanisms by which they function in soils. Furthermore, the extraction processes of humic substances from various feedstock were illustrated, with the alkali extraction technique being the most widely used. In addition, the functional group and elemental composition of humic substances were discussed. The similarities and/or variations in the properties of humic substances as influenced by the source and origin of feedstock were highlighted. Finally, the environmental impacts of humic substances were discussed while highlighting prospects of humic acid production. This review offers enormous potential in identifying these knowledge gaps while recommending the need for inter- and multidisciplinary studies in making extensive efforts toward the sustainable production of humic substances.

Elucidation of aniline adsorption-desorption mechanism on various organo-mineral complexes

Complexes formed by organic matter and clay minerals, which are active components of soil systems, play an important role in the migration and transformation of pollutants in nature. In this study, humic-acid-montmorillonite (HA-MT) and humic-acid-kaolin (HA-KL) complexes were prepared, and their structures before and after the adsorption of aniline were analyzed. The aniline adsorption-desorption characteristics of complexes with different clay minerals and varying HA contents were explored using the static adsorption-desorption equilibrium method. Compared with the pristine clay minerals, the flaky and porous structure of the complexes and the aromaticity were enhanced. The adsorption of aniline on the different clay mineral complexes was nonlinear, and the adsorption capacity increased with increasing HA content. Additionally, the adsorption capacity of HA-MT was higher than that of HA-KL. After adsorption, the specific surface area of the complexes decreased, the surfaces became more complicated, and the aromaticity decreased because aniline is primarily adsorption onto the complexes via aromatic rings. Aniline was adsorbed onto the complexes via spontaneous exothermic physical adsorption. The amount of aniline desorbed from the complexes increased with increasing HA content, and a lag in desorption was observed, with a greater lag for HA-KL than for HA-MT.

Perturbation and strengthening effects of DOM on the biochar adsorption pathway

Biochar is an effective adsorbent commonly used in pollutants adsorption. However, natural constituents, such as dissolved organic matter (DOM), could affect pollutants adsorption. In this study, we analyzed the mechanisms underlying phenol adsorption on pine biochar under perturbation by fertilizer-derived DOM. In addition, biochar property alterations were characterized and further analyzed. The results showed that phenol and DOM combined to a certain extent in the adsorption system. DOM affected the adsorption pathway, which increased the biochar adsorption efficiency for phenol. The addition of DOM₂ promoted phenol adsorption efficiency (70.31%), with total DOM adsorption capacity of 61.45 mg g^-1 onto biochar.

Adsorption of benzene on soils under different influential factors: an experimental investigation, importance order and prediction using artificial neural network

The adsorption of benzene on soils is specifically associated with its migration and transformation. Although previous studies have proved that the adsorption of benzene is affected by various factors, studies simultaneously considering the effects of multiple factors are rare. This study aimed to identify the qualitative and quantitative relationships between multiple influential factors and the adsorption capacity of benzene (BC). Batch adsorption experiments considering different influential factors, including initial concentration (IC), pH, temperature (T), ion strength (IS) and organic matter content (OMC), were conducted in three kinds of soils collected in a chemical industry park. The correlation analysis between different influential factors and BC was carried out based on the experimental data. The artificial neural network (ANN) was applied to predict BC. The results showed that BC increased with the increase of T. As the pH increased, BCs on silty loam and loam increased, while that on sandy loam decreased. Besides, BCs on silty loam and loam raised with increasing OMC, while that on sandy loam remained unchanged. BCs on all three kinds of soils attained their peaks when IS was small and then become stable with an increase in IS. The sequence of correlation between BC and influential factors is listed as IC > OMC > T > IS > pH for silty loam, OMC > IC > T > IS > pH for loam and IC > T > IS > pH > OMC for sandy loam. ANN analysis showed satisfactory accuracy in predicting BC under different influential factors. These results help us understand the important factors affecting benzene adsorption and provide a tool to get the adsorption information easily in complex site conditions.

Advances in pretreatment and analysis methods of aromatic hydrocarbons in soil

Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.

Sorption of Organic Pollutants by Humic Acids: A Review

Humic acids (HA) are promising green materials for water and wastewater treatment. They show a strong ability to sorb cationic and hydrophobic organic pollutants. Cationic compounds interact mainly by electrostatic interaction with the deprotonated carboxylic groups of HA. Other functional groups of HA such as quinones, may form covalent bonds with aromatic ammines or similar organic compounds. Computational and experimental works show that the interaction of HA with hydrophobic organics is mainly due to π-π interactions, hydrophobic effect and hydrogen bonding. Several works report that sorbing efficiency is related to the hydrophobicity of the sorbate. Papers about the interaction between organic pollutants and humic acids dissolved in solution, in the solid state and adsorbed onto solid particles, like aluminosilicates and magnetic materials, are reviewed and discussed. A short discussion of the thermodynamics and kinetics of the sorption process, with indication of the main mistakes reported in literature, is also given.

Incorporation of humic acid into biomass derived carbon for enhanced adsorption of phenol

In the present work, the biomass derived carbon decorated with humic acid (HC), was synthesized through impregnation method for the adsorption of phenol from water environment. Humic acids contain more oxygen-containing functional groups and hydrogen bonds, which promotes the binding between HC and phenol molecules. The results indicated that the adsorption performance of HC to phenol was better than that of commercial activated carbon. Moreover, in addition to physical absorption, the chemical reaction between carboxylic groups on the carbon surface and hydroxyl in phenol also played an important role during the process. The adsorption behavior of HC was described by equilibrium and kinetics parameters. Pseudo-second order model can describe the adsorption process well. Langmuir model was more suitable for the equilibrium adsorption data fitting, indicating that the adsorption mechanism of phenol on carbon surface tends to be monolayer adsorption. Considering practical application, UV₂₅₄, chemical oxygen demand (COD) and ammonia from raw wastewater were selected as target contaminants and the corresponding adsorption experiments were carried out. The results displayed that HC exhibited excellent adsorption performance, especially for UV₂₅₄, indicating that as-prepared carbon material had potential application for the control of certain organic pollutants in actual wastewater.