Degradation of Nystatin in aqueous medium by coupling UV-C irradiation, H2O2 photolysis, and photo-Fenton processes

In-situ degradation of Amphotericin B in a microbial electrochemical cell containing wastewater

Antimicrobial resistance raises serious medical implications and is primarily caused by indiscriminate usage and environmental contamination with antimicrobial agents. To prevent microbes from developing resistance against antimicrobial agents, they must be effectively degraded. This is the first study that investigates the degradation of Amphotericin B(AmB) with simultaneous wastewater treatment in a Microbial Peroxide producing cell (MPPC). Two sets of MPPCs (A and B) were used to degrade AmB oxidatively, one with H₂O₂ and the other with the microbial electro Fenton process in a catholyte containing 0.1% AmB. MPPC A and B had voltage outputs of 0.356 ± 3 V and 0.411 ± 2 V, producing 26 ± 0.04 mM and 44 ± 0.8 mM of H₂O₂ respectively. The structural changes of treated samples were analyzed using Fourier Transformed Infrared Spectroscopy, which revealed the disappearance of major characteristic bands such as the NH band (1556 cm^-1), the CH band Polyene ring (3358 cm^-1), and others, implying the disruption of multiple double bonds in polyene, resulting in the structure's lactone ring breakdown. Liquid chromatography quadrupole time-of-flight revealed the changes in retention time and peak area of treated samples in comparison to native AmB which also confirmed its structural changes. Such structural disruption induced the drug to lose its antifungal action since no zones of inhibition were detected in an antimicrobial susceptibility test against Candida albicans. The degradation of 57.05% and 69.83% of AmB by H₂O₂ and the Fenton process was also correlated with a reduction in COD. Simultaneously the anodic wastewater treatment in both the MPPCs had COD removal efficiency of 78% and 82% and the BOD removal efficiency was 75.38% and 90% respectively. The MPPC system's process conditions and reactor design could be optimized further to enhance antimicrobial degradation and wastewater treatment. This research offers a sustainable and efficient method for expediting antimicrobial degradation while simultaneously treating wastewater.

Treatment of a clinical analysis laboratory wastewater from a hospital by photo-Fenton process at four radiation settings and toxicity response

The photo-Fenton process was performed with four radiation settings to treat clinical analysis laboratory wastewater (CALWW) from a hospital, with the aim of evaluating its treatability and acute toxicity response in Daphnia magna and Lactuca sativa. The experiments were performed in a borosilicate bench-scale conventional reactor for 320 min. The light radiation was suspended 13 cm from the CALWW surface for mild radiation or immersed into the matrix for intense radiation. All photo-Fenton experimental conditions were set at pH 3.0, 15 mg L^-1 of Fe²⁺, and initial H₂O₂ of 300 mg L^-1. The initial Fe²⁺ concentration was converted to Fe³⁺ ion in the first 15 min of photooxidation for all processes. Furthermore, the intense radiation processes regenerated Fe²⁺ faster than other systems. Neither mild UVA-Vis nor mild UVC-Vis radiation significantly treated the organic matter or phenols. However, mild UVC-Vis resulted in a higher biodegradability transformation rate (biochemical oxygen demand/chemical oxygen demand 0.51), indicating that it could treat more recalcitrant organic matter than mild UVA-Vis. Intense radiation proved to be more efficient, with a chemical oxygen demand removal rate of 95% for intense UVA-Vis and 99% for intense UVC-Vis treatments. All treatments reduced acute toxicity in D. magna. Moreover, photo-Fenton treatment by intense UVA-Vis decreased toxicity ~98%, compared to mild and intense UVC-Vis, ~75%. Both of the mild radiation treatments inhibited the germination of L. sativa seeds. The intense UVA-Vis photo-Fenton treatment was the only setting that removed phytotoxicity, resulting in a non-significant effect, and the intense UVC-Vis treatment inhibited the seed growth.

Enhanced heterogeneous catalytic ozonation of pharmaceutical pollutants using a novel nanostructure of iron-based mineral prepared via plasma technology: A comparative study

Plasma-treated goethite nanoparticles with high surface area and improved density of surface hydroxyl groups were synthesized from natural goethite (NG) using Argon (PTG-Ar) and Nitrogen (PTG-N₂) as plasma environment to enhance the performance of heterogeneous catalytic ozonation process. Synthesized samples were characterized by FESEM, EDX, TEM, XRD, XPS, BET-BJH, FTIR, AAS and pH_PZC. Results indicated a significantly different morphology for the prepared samples with negligible change in crystal structure. Furthermore, the catalytic activity and synergy factor of the NG and PTG nanocatalysts were evaluated for degradation and mineralization of Sulfasalazine antibiotic (SSZ) as an environmental hazardous contaminant. The highest removal efficiency was achieved 96.05 % under the optimal operating conditions. The kinetic study confirmed the pseudo-first-order reaction for the degradation process. Moreover, the dissolved ozone concentration and effect of organic and inorganic salts were studied in order to assess the reactive oxidant species (ROSs) and catalyst active sites in the process. The mechanism investigation showed the catalytic ozonation of SSZ was mainly performed by successive attacks of hydroxyl radicals (•OH), superoxide radicals (O₂^-) and direct ozone molecules. Environmentally-friendly modification of the NG, negligible iron leaching, successive reusability and superior catalytic activity are the major benefits of the PTG nanoparticles.

Performance evaluation of photolytic and electrochemical oxidation processes for enhanced degradation of food dyes laden wastewater

Wastewater containing dyes is considered as the top-priority pollutant when discharged into the environment. Herein, we report for the applicability of 254 nm ultraviolet light and electrochemical process using a titanium ruthenium oxide anode for the degradation of Allura red and erythrosine dyes. During the photolytic process, 95% of Allura red dye (50 ppm) was removed after 1 h at pH 12 and 35 °C, whereas 90% color removal of erythrosine dye (50 ppm) was achieved after 6 h of treatment at pH 6.0 and 30 °C. On the other hand, 99.60% of Allura red dye (200 ppm) was removed within 5 min by the electrochemical process applying a current density (5 mA cm^-2) at pH 5.0 and 0.1 mol L^-1 sodium chloride (NaCl) electrolytic medium. Similarly, 99.61% of erythrosine dye (50 ppm) degradation was achieved after 10 min at a current density of 8 mA cm^-2, pH 6.0, and 0.1 mol L^-1 of NaCl electrolyte. The minimum energy consumption value for Allura red and erythrosine dyes (0.196 and 0.941 kWh m^-3, respectively) was calculated at optimum current densities of 5 and 8 mA cm^-2. The results demonstrated that the electrochemical process is more efficient at removing dyes in a shorter time than the photolytic process since it generates powerful oxidants like the chlorine molecule, hypochlorous acid, and hypochlorite on the surface of the anode and initiates a chain reaction to oxidize the dyes molecules.