Magnetic polymer-supported adsorbent with two functional adsorption sites for phosphate removal

Efficient removal of phosphate from aqueous media using magnetic bimetallic lanthanum‑iron-modified sulfonylmethylated lignin biochar

The use of lignin carbon as an adsorbent for the adsorption of phosphates from wastewater is a promising technology. However, most lignin carbon-based adsorbents still suffer from low adsorption efficiency and poor selectivity. Herein, a novel FeLaO3-modified sulfomethylated lignin (SL) biochar adsorbent (FLO@CSL) was prepared for phosphate removal. The development of this adsorbent took into consideration the strong affinity of lanthanum (La) and iron (Fe) (hydro) oxides for phosphate and the excellent carrier properties of lignin-based biochar. As the core of FLO@CSL, FeLaO3 active sites are highly dispersed on the surface of SL biochar. Besides, doping of Fe(III) not only imparts magnetic properties to FLO@CSL, thereby effectively improving the separation efficiency of the adsorbent, but also enhances the phosphate adsorption performance. Performance studies revealed that FLO@CSL exhibits remarkable adsorption selectivity and substantial phosphate-adsorption capacity. Notably, the maximum adsorption capacity was found to be 137.14 mg P g-1. Phosphate adsorption on the FLO@CSL surfaces proceeds via chemisorption in a single layer, and ligand exchange plays an important role in determining the adsorption behaviour. Because of its exceptional selectivity, remarkable adsorption capacity and outstanding magnetic separation efficiency, FLO@CSL is a highly promising adsorbent material for effectively treating phosphates in wastewater.

A review of the application of cerium and lanthanum in phosphorus removal during wastewater treatment: Characteristics, mechanism, and recovery

Owing to their strong bond with anions, rare earth elements (REEs) are prime contenders in wastewater treatment to meet the stringent phosphorus (P) effluent quality requirements. REEs outcompete traditional metals to abate phosphorus. The application of lanthanides in wastewater treatment is mainly through adsorption, where REEs are incorporated into a carrier matrix to improve the adsorption capacity. As coagulants, information on the performance of lanthanides is lacking. In this review, the performance of major water coagulants (iron and aluminum) is discussed and compared to two lanthanides: cerium and lanthanum. The use of lanthanides as adsorbents and as coagulants is elucidated during P treatment. The recovery of P and REEs is also discussed. Where details were lacking in the literature, experiments were conducted to fill these research gaps. Using REEs as adsorbents limits their P precipitation potential; as coagulants, REE capacity is 520.79 mg P/g La³⁺ and 469.96 mg P/g Ce³⁺. In addition, as coagulants, they are not affected by pH (3.0 < pH < 10.0); however, carbonates and sulfate are the major species that can reduce the performance of REEs during P treatment. REE-P precipitation is orchestrated through the formation of an REE-PO₄ bond. Unfortunately, this strong bond between lanthanides and phosphate makes phosphate recovery almost impractical. If the goal is to recover REEs and reuse P in other applications like fertilizers, REEs are not the best candidates. We recommend additional research dedicated to understanding lanthanide coagulants in typical wastewater treatment facilities and their release from phosphate precipitates under different environmental conditions.

Cellulose citrate: a convenient and reusable bio-adsorbent for effective removal of methylene blue dye from artificially contaminated water

In the present work, we proved the efficacy of cellulose citrate to remove methylene blue (MB) from artificially contaminated water. MB is a widely used dye, but because of its chemical aromatic structure, it is significantly stable with quite slow biodegradation, causing consequent serious health problems for people and significant environmental pollution. Cellulose citrate, the bio-adsorbent proposed and studied by us to remediate water polluted by MB, is produced by a green, cheap and fast procedure that makes use of two abundant natural products, cellulose and citric acid. The average of two citrate groups for each glucose unit of cellulose chains allows this material to have many carboxylic groups available for interaction with the cationic dye. The characterization was carried out through FT-IR, SEM, specific surface area, pore structure parameters and zeta potential. The negative value of the zeta potential at neutral pH is consistent with the affinity of this material for the adsorption of cationic compounds like MB. The activity of the adsorbent at different times, temperatures, pH and concentrations was investigated. The process followed monolayer adsorption typical of the Langmuir model, with a maximum adsorption capacity of 96.2 mg g-1, while for the kinetic studies the process followed a pseudo-second order model. The highest levels of adsorption were reported using solutions of dye with concentrations under 100 mg L-1. The adsorbent can be regenerated several times without a significant loss in the adsorption capacity, and it is not strongly affected by temperature and pH, giving rise to a simple and eco-sustainable procedure for water remediation. Therefore, we conclude that cellulose citrate can be considered as a promising bio-adsorbent for the removal of MB and other cationic pollutants from the environment.

Evaluation of phosphate adsorption by porous strong base anion exchangers having hydroxyethyl substituents: kinetics, equilibrium, and thermodynamics

Phosphate anions are recognized as the main responsible for the eutrophication of surface waters. In this work, two strong base anion exchangers having either N,N-dimethyl 2-hydroxyethylammonium (SBAEx.2M) or N,N-diethyl 2-hydroxyethylammonium (SBAEx.2E) functional groups, as highly efficient sorbents in the removal of phosphate anions, are presented. The influence of the main parameters (pH, contact time, initial concentration of phosphate, temperature) on the adsorption performances was investigated in batch mode. Modeling the kinetics data by Lagergren, Ho and McKay, and Elovich kinetic models indicated chemisorption as the main mechanism of sorption. The sorption at equilibrium was modeled with Langmuir, Freundlich, Sips, Dubinin-Radushkevich, and Temkin isotherm models. The experimental isotherms were the best fitted by Langmuir and Sips isotherms, the maximum sorption capacity for phosphate anions being 233.88 mg g^-1 SBAEx.2M and 223.5 mg g^-1 SBAEx.2E, at pH 3, and 23 °C. Adsorption of phosphate anions in competitive conditions showed that the interference with co-existing anions was low in the case of Cl^- ions and much higher with SO₄^2- ions, the ion exchange having an important contribution in the adsorption process. The adsorption was spontaneous and endothermic, the degree of spontaneity increasing with the increase of temperature. The high level of reusability, the adsorption capacity decreasing with only ~ 7% in the case of SBAEx.2E and with ~ 9% in the case of SBAEx.2M, after five sorption/desorption cycles, recommends these SBAEx as promising adsorbents for phosphate removal.