Recycling of the scrap LCD panels by converting into the InBO3 nanostructure product

A novel conversion strategy for organic compounds in waste liquid crystal displays based on the near/supercritical methanol process

Waste liquid crystal displays (LCD) contain a large number of organic compounds such as cellulose triacetate (CTA), poly(vinyl alcohol) (PVA), triphenyl phosphate (TPP), and liquid crystal (LC). It is important to recover organic compounds from waste LCD due to their value and environmental toxicity. However, it is challenging to recover organic compounds from waste LCD because of the heterogeneous mixture of glass, organics and metals contained therein. In this study, an environment-friendly near/supercritical methanol (NSCM) process was developed as a closed cycle technology for the conversion of organic compounds from waste LCD. The acid-base catalytic activity and nonpolar property of the NSCM could efficiently promote the conversion of organic compounds from waste LCD. TPP could be extracted below 200 °C in the NSCM process. Below 250 °C, the conversion ratio of organic compounds from waste LCD ranged from 5 % to 68 % due to the extraction or decomposition of TPP, LC, and PVA. The main products obtained at 250 °C included long-chain alcohols and alkanes with a similar composition to industrial liquid paraffin, which could be widely used in other industrial processes. Under the optimal operation parameters (300 °C, 30 min, and 1:20 g/ml), the conversion ratio of organic compounds could reach 98 % due to the efficient decomposition of CTA. The main products obtained included ketones and esters chemicals, which could be further used as a chemical feedstock. No secondary pollutant was generated in the whole process. The low-boiling methanol could easily be recycled, which could make the NSCM a clean process for the production of high value-added organic products from waste LCD.

Novel trends in the thermo-chemical recycling of plastics from WEEE containing brominated flame retardants

The amount of plastics from waste electric and electronic equipment (WEEE) has enormously increased nowadays, due to the rapid expansion and consumption of electronic devices and their short lifespan. This, in combination with their non-biodegradability, led to the need to explore environmentally friendly solutions for their safe disposal. One main obstacle when recycling plastics from WEEE is that they usually comprise harmful additives such as brominated flame retardants (BFRs) that need to be removed before or during their recycling. This paper reviews existing techniques for the recycling of plastics from WEEE and focuses specifically on the advantages, disadvantages, and challenges of pyrolysis as an environmentally friendly method for the production of value-added materials (monomers, hydrocarbons, phenols, etc.). Current technological trends available for the recycling of plastics containing brominated flame retardants are reviewed in an attempt to provide insights for future research on the sustainable management of plastics from WEEE. Emphasis is given on conventional pyrolysis, where a pretreatment step for the debromination of products is applied. This is required since brominated compounds treated at high temperatures may result in the production of harmful to health compounds such as dioxins. All current pretreatment methods (solvent extraction, supercritical fluid technology, etc.) are presented and compared in detail. Co-pyrolysis is also investigated, as it seems to be a very interesting approach, since no catalysts or solvents are used, and at the same time, more plastic wastes can be consumed as feedstock. Furthermore, catalytic pyrolysis along with key parameters, such as the type of the catalyst or pyrolysis temperature, are fully analyzed. Catalysts affect the products' distribution and enhance the removal of bromine from pyrolysis oils. Finally, an emerging technique, that of microwave-assisted pyrolysis, is also highlighted, as it offers many advantages over conventional pyrolysis. Of course, there are some impediments, such as the operational costs or other difficulties as regards the industrial implementation of the mentioned techniques that need to be overcome through future works.