Evaluation of kinetics and mechanism properties of CO2 adsorption onto the palm kernel shell activated carbon

Waste for Product-Synthesis and Electrocatalytic Properties of Palladium Nanopyramid Layer Enriched with PtNPs

The presented research is the seed of a vision for the development of a waste-for-product strategy. Following this concept, various synthetic solutions containing low concentrations of platinum group metals were used to model their recovery and to produce catalysts. This is also the first report that shows the method for synthesis of a pyramid-like structure deposited on activated carbon composed of Pd and Pt. This unique structure was obtained from a mixture of highly diluted aqueous solutions containing both metals and chloride ions. The presence of functional groups on the carbon surface and experimental conditions allowed for: the adsorption of metal complexes, their reduction to metal atoms and enabled further hierarchical growth of the metal layer on the carbon surface. During experiments, spherical palladium and platinum nanoparticles were obtained. The addition of chloride ions to the solution promoted the hierarchical growth and formation of palladium nanopyramids, which were enriched with platinum nanoparticles. The obtained materials were characterized using UV-Vis, Raman, IR spectroscopy, TGA, SEM/EDS, and XRD techniques. Moreover, Pd@ROY, Pt@ROY, and Pd-Pt@ROY were tested as possible electrocatalysts for hydrogen evolution reactions.

New porous amine-functionalized biochar-based desiccated coconut waste as efficient CO2 adsorbents

Climate change caused by the greenhouse gases CO2 remains a topic of global concern. To mitigate the excessive levels of anthrophonic CO2 in the atmosphere, CO2 capture methods have been developed and among these, adsorption is an especially promising method. This paper presents a series of amine functionalized biochar obtained from desiccated coconut waste (amine-biochar@DCW) for use as CO2 adsorbent. They are ethylenediamine-functionalized biochar@DCW (EDA-biochar@DCW), diethylenetriamine-functionalized biochar@DCW (DETA-biochar@DCW), triethylenetetramine-functionalized biochar@DCW (TETA-biochar@DCW), tetraethylenepentamine-functionalized biochar@DCW (TEPA-biochar@DCW), and pentaethylenehexamine-functionalized biochar@DCW (PEHA-biochar@DCW). The adsorbents were obtained through amine functionalization of biochar and they are characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, Brunauer-Emmett-Teller (BET), and thermogravimetric analysis (TGA). The CO2 adsorption study was conducted isothermally and using a thermogravimetric analyzer. From the results of the characterization analyses, a series of amine-biochar@DCW adsorbents had larger specific surface area in the range of 16.2 m2/g-37.1 m2/g as compare to surface area of pristine DCW (1.34 m2/g). Furthermore, the results showed an increase in C and N contents as well as the appearance of NH stretching, NH bending, CN stretching, and CN bending, suggesting the presence of amine on the surface of biochar@DCW. The CO2 adsorption experiment shows that among the amine modified biochar adsorbents, TETA-biochar@DCW has the highest CO2 adsorption capacity (61.78 mg/g) when using a mass ratio (m:m) of biochar@DCW:TETA (1:2). The adsorption kinetics on the TETA-biochar@DCW was best fitted by the pseudo-second model (R2 = 0.9998), suggesting the adsorption process occurs through chemisorption. Additionally, TETA-biochar@DCW was found to have high selectivity toward CO2 gas and good reusability even after five CO2 adsorption-desorption cycles. The results demonstrate the potential of novel CO2 adsorbents based on amine functionalized on desiccated coconut waste biochar.

Comparative study of ZIF-8-materials for removal of hazardous compounds using physio-chemical remediation techniques

The inherent toxicity, mutagenicity and carcinogenicity of dyes that are discharged into aquatic ecosystems, harming the health of humans and animals. ZIF-8 based composites are regarded as good adsorbents for the breakdown of dyes in order to remove or degrade them. In the course of this research, metal-organic framework materials known as ZIF-8 and its two stable composites, ZIF-8/BiCoO₃ (MZBC) and ZIF-8/BiYO₃ (MZBY), were produced via a hydrothermal process and solvothermal process, respectively, for the dangerous Congo red (CR) dye removal from the solution in water using adsorption method. According to the findings, the most significant amount of CR dye that could be adsorbed is onto MZBC, followed by MZBY and ZIF-8. The pseudo-second-order kinetic model was used effectively to match the data for adsorption behavior and was confirmed using the Langmuir isotherm equation. There is a possibility that the pH and amount of adsorbent might influence the adsorption behavior of the adsorbents. According to the experiment results, the technique featured an endothermic adsorption reaction that spontaneously occurred. The higher adsorption capability of MZBC is because of the large surface area. This results in strong interactions between the functional groups on the surface of MZBC and CR dye molecules. In addition to the electrostatic connection between functional group Zn-O-H on the surface of ZIF-8 in MZBC and the -NH₂ or SO₃ functional group areas in CR molecules, it also includes the strong π-π interaction of biphenyl rings.

Biomass-based adsorbents for post-combustion CO2 capture: Preparation, performances, modeling, and assessment

The adsorbents are critical carriers in the process of adsorption-based post-combustion CO₂ capture. Biomass-based adsorbents (BAs) are considered to have great potential because of their high efficiency, low cost, and good sustainability. To understand the methods, theories, and technologies of BAs-based CO₂ capture, this work analyzes their preparation and activation/modification, influencing factors, mechanisms, thermodynamics/kinetics, regeneration and cycle performances, and the pathway to application. It is found that BAs prepared by pyrolysis, chemical activation, and modification with dual heteroatoms are more conducive to improving adsorption sites. CO₂ adsorption capacity positively correlates with elemental C and fixed carbon of feedstocks, but negatively with moisture. The BAs prepared at 550-600 °C have high performance. The specific surface area (SSA) increases as the preparation time increases by 9.4%-93.4%. The adsorption capacity is positively correlated to the SSA (R = 0.880) and microporous volume (R = 0.773). Moreover, it decreases linearly with increasing operating temperature with the slope of -0.6 mmol/(g·°C) but increases exponentially with increasing operating pressure and CO₂ concentration with the power of 0.824. The adsorption process includes physical and/or physicochemical adsorption. Freundlich isotherm equation and pseudo-second-order model characterize the adsorption thermodynamics and kinetics more effectively with R² = 0.985-1.000 and R² = 0.894-1.000. The quantum chemistry indicates that most BAs modified with non-metallic belong to physisorption. The regeneration of BAs has low energy consumption (<3.44 MJ/kg CO₂) and loss rate (<8%). Furthermore, the technical pathway is proposed for application. Finally, the challenges are also presented to facilitate the development of BAs-CO₂ capture.

Coupling of carboxymethyl starch with 2-carboxyethyl acrylate: A new sorbent for the wastewater remediation of methylene blue

Textile and printing industries play a vital role in the economy of any country. But the effluents of these industries, which contain toxic Methylene Blue (MB) dye when mixed with fresh water, make it unfit for human health and aquatic life. For the removal of MB, different adsorbents were used, but they were expensive, non-biodegradable or less effective. In this research, novel carboxymethyl starch grafted poly 2-carboxyethyl acrylate (CM-St-g-P2CEtA) was synthesized by reacting carboxymethyl starch with 2-carboxyethyl acrylate. The reaction followed a free radical polymerization mechanism. The structure and properties of CM-St-g-P2CEtA were investigated by advanced analytical techniques. The CM-St-g-P2CEtA was employed for the remediation of Methylene Blue (MB) dye from wastewater. The removal percentage (%R) of MB was checked under different parameters, like different pH levels, different initial concentrations of dye, different adsorbent doses, and different contact times. The results obtained during the experiment were subjected to different adsorption and kinetic models. In the kinetic investigation, the experimental results were best represented by the pseudo-second-order kinetic model due to its high R² value of 0.999. Similarly, with a regression coefficient (R²) value of 0.947, the Langmuir adsorption isotherm was best represented by the experimental results. The Langmuir adsorption model showed that MB dye was adsorbed on the surface of CM-St-g-P2CEtA in a monolayer pattern. The pseudo 2nd order kinetic model suggested that the adsorption process favored chemisorption mechanism. The CM-St-g-P2CEtA showed maximum percentage removal efficiency (%R) of 99.3% for MB dye.

Cu-BDC and Cu2O Derived from Cu-BDC for the Removal and Oxidation of Asphaltenes: A Comparative Study

Asphaltenes have been associated with a number of problems in the petroleum industry with regard to the storage, exploration, and transportation of petroleum crude. In the current work, Copper-BenzeneDiCarboxylic acid (Cu-BDC) and Cu-BDC derived metal oxide has been used in the removal and oxidation of the asphaltenes. The MOF derived metal oxide was confirmed to be Cu2O. Though adsorption of asphaltenes followed a Langmuir adsorption isotherm in both cases, Cu-BDC was superior to Cu2O with an adsorption capacity four times that of the adsorption capacity of Cu2O. Also, the kinetic studies showed that the adsorption kinetics followed pseudo second order adsorption kinetics in both cases. From the oxidation studies, it was found that Cu-BDC was unstable beyond 350 °C and had no role in catalyzing the oxidation reaction. The Cu2O, however, was successful at catalyzing the asphaltene oxidation reaction and a reduction of 50 °C in oxidation temperature was observed. Hence comparing Cu-BDC with Cu2O, MOF was successful in the adsorption reaction but the MOF derived metal oxide had the upper hand in the oxidation reaction.

Facile Synthesis of Mesoporous Silica at Room Temperature for CO2 Adsorption

Although mesoporous silica materials have been widely investigated for many applications, most silica materials are made by calcination processes. We successfully developed a convenient method to synthesize mesoporous materials at room temperature. Although the silica materials made by the two different methods, which are the calcination process and the room-temperature process, have similar specific surface areas, the silica materials produced with the room-temperature process have a significantly larger pore volume. This larger pore volume has the potential to attach to functional groups that can be applied to various industrial fields such as CO₂ adsorption. This mesoporous silica with a larger pore volume was analyzed by TEM, FT-IR, low angle X-ray diffraction, N₂-adsorption analysis, and CO₂ adsorption experiments in comparison with the mesoporous silica synthesized with the traditional calcination method.

Fe-Catalyzed CO2 Adsorption over Hexagonal Boron Nitride with the Presence of H2O

The energy barrier of CO₂ chemically adsorbed on hexagonal boron nitride (h-BN) is relatively big. In order to cut down the energy barriers and facilitate fast adsorption of CO₂, it is necessary to apply catalysts as a promoter. In this study, single-atom iron is introduced as the catalyst to reduce the energy barriers of CO₂ adsorbed on pure/doped h-BN. Through density functional theory calculations, catalytic reaction mechanisms, stability of single-atom iron fixed on adsorbents, CO₂ adsorption characteristics, and features of thermodynamics/reaction dynamics during adsorption processes are fully investigated to explain the catalytic effects of single-atom iron on CO₂ chemisorption. According to calculations, when CO₂ and OH^- get into activated states (i.e., CO₂^•- and ^•OH) with the help of single-atom iron, their chemical activities will be promoted to a large degree, which makes the transition state (TS) energy barrier of HCO₃^- to decrease by 92.54%. In the meantime, it is proved that single-atom iron could be stably fixed on doped h-BN with the binding energy larger than 2 eV to achieve sustainable catalysis. With the presence of single-atom iron, TS energy barriers of CO₂ adsorbed on h-BN with the presence of H₂O decreased by 94.39, 78.87, and 30.63% over pure h-BN, 3C-doped h-BN, and 3N-doped h-BN, respectively. In the meantime, thermodynamic analyses indicate that TS energy barriers are mainly determined by element doping and temperatures are a little beneficial to the reduction of TS energy barriers. With the above aspects combined, the results of this study could supply crucial information for massively and quickly capturing CO₂ in real industries.

Synthesis and Characteristics of Double-Shell Mesoporous Hollow Silica Nanomaterials to Improve CO2 Adsorption Performance

To improve the adsorption performance of carbon dioxide, which is considered the main culprit of greenhouse gases, the specific surface area and high pore volume of the adsorbing material should be considered. For a porous material, the performance of carbon dioxide adsorption is determined by the amine groups supporting capacity; the larger the pore volume, the greater the capacity to support the amine groups. In this study, a double-shell mesoporous hollow silica nanomaterial with excellent pore volume and therefore increased amine support capacity was synthesized. A core-shell structure capable of having a hollow shape was synthesized using polystyrene as a core material, and a double-shell mesoporous shape was synthesized by sequentially using two types of surfactants. The synthesized material was subjected to a sintering process of 600 degrees, and the N2 sorption analysis confirmed a specific surface area of 690 m2/g and a pore volume of 1.012 cm3/g. Thereafter, the amine compound was impregnated into the silica nanomaterial, and then, a carbon dioxide adsorption experiment was conducted, which confirmed that compared to the mesoporous hollow silica nanomaterial synthesized as a single shell, the adsorption performance was improved by about 1.36 times.

A review of common practices in gravimetric and volumetric adsorption kinetic experiments

The availability of commercial gravimetric and volumetric systems for the measurement of adsorption equilibrium has seen also a growth of the use of these instruments to measure adsorption kinetics. A review of publications from the past 20 years has been used to assess common practice in 180 cases. There are worrying trends observed, such as lack of information on the actual conditions used in the experiment and the fact that the analysis of the data is often based on models that do not apply to the experimental systems used. To provide guidance to users of these techniques this contribution is divided into two parts: a discussion of the appropriate models to describe diffusion in porous materials is presented for different gravimetric and volumetric systems, followed by a structured discussion of the main trends in common practice uncovered reviewing a large number of recent publications. We conclude with recommendations for best practice to avoid incorrect interpretation of these experiments.