Phytoremediation of synthetic textile dyes: biosorption and enzymatic degradation involved in efficient dye decolorization by Eichhornia crassipes (Mart.) Solms and Pistia stratiotes L

Coupled adsorption-phytoremediation treatment of cellulose-reactive blue dye in a sustainable multi-step pilot-scale process

A single-step dye removal strategy from wastewater is inadequate for concentrations above 100 mg/L. In order to address this limitation, the adsorption of high dye concentrations followed by phytoremediation is a potential approach for the treatment of dye-contaminated wastewater. This combined method utilizes physical adsorption and biological processes to remove dyes from wastewater. Herein, we investigated a pilot-scale multi-step cascaded process where batch adsorption and fixed-bed column adsorption were combined with phytoremediation to remove cellulose-reactive blue dye at 200 to 500 mg/L concentrations. The batch adsorption utilized low-cost water hyacinth root powder (WHRP) bioadsorbent having 670 m2/g surface area, whereas the fixed-bed column adsorption used sand having a surface area of 75 m2/g. The phytoremediation process utilized water hyacinth plants in a series of ponds. The effluent from one unit is fed to the next until the dye is removed to more than 98% for all concentrations considered in this study. Pilot-scale experimental data fitting to adsorption isotherms and kinetics were performed to gain insight into the pilot-scale adsorption mechanism. The fixed-bed sand column adsorption was conducted at different inlet dye concentrations, flow rates, and bed heights. The breakthrough curves were fit to the Thomas, Yoon-Nelson, and Bohart-Adams models. The effluent from the fixed-bed column was transferred to phytoremediation ponds, where complete dye removal was achieved. Overall, data collectively presented in this study demonstrated that the combined adsorption and phytoremediation approach offers a potential solution for the remediation of high dye concentration in wastewater, providing an effective and sustainable treatment option.

Mechanistic insights on enzyme mediated-metabolite cascade during decolourization of Reactive Blue 13 using novel microbial consortium

Understanding the role of oxido-reductase enzymes followed by deciphering the functional genes and their corresponding proteins are crucial for the speculation of molecular mechanism for azo dye degradation. In the present study, decolourization efficiency of developed microbial consortium was tested using 100 mgL^-1 reactive blue 13 (RB13) and the results showed ∼92.67% decolourization of RB13 at 48 h of incubation. The fourier-transform infrared spectroscopy (FTIR), high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS) analysis were performed to identify the metabolites formed during RB13 degradation, followed by hypothesizing the metabolic pathway. The GC-MS analysis showed formation of 1,4-dihydronaphthalen-1-ol and 1,3,5-triazin-2-amine as the final degraded compounds after enzymatic breakdown of RB13 dye. The activity of different oxido-reductase enzymes was determined, and the results showed that NADH DCIP reductase and azo reductase had higher activity than other enzymes. It clearly indicated the degradation was initiated with the enzymatic cleavage of azo bond of RB13. Further, the functional genes were annotated against the database of clusters of orthologous groups (COGs) and kyoto encyclopedia of genes and genomes (KEGG). It provided valuable information about the role of crucial functional genes and their corresponding proteins correlated with dominant bacterial species in degradation of RB13. Hence, the present research is the first systematic study that correlated the formation of degradation compounds with the functional genes/enzymes and their corresponding bacterial species responsible for RB13 degradation.

Application of Salvinia sps. in remediation of reactive mixed azo dyes and Cr (VI) - Its pathway elucidation

The emerging industrialization has resulted in the rapid growth of textile industries across the globe. The presence of xenobiotic pollutants in textile wastewater threatens the ecosystem. Applying different microbes (bacteria, fungi & algae) has paved the way for phytoremediation - the eco-friendly, cost-effective method. The present study focuses on the phytoremediation of reactive dyes - Reactive red, Reactive Brown & Reactive Black and Cr (VI) in synthetic textile wastewater using Salvinia sps. The mixed azo dyes of each 100 mg/L showed decolourization of 75 ± 0.5% and 82 ± 0.5% of removal of 20 mg/L of Cr (VI) after eight days of incubation in a phytoreactor setup. Chlorophyll analysis revealed the gradual decrease in the photosynthetic pigments during the remediation. The degraded metabolites were analyzed using FT-IR and showed the presence of aromatic amines on day zero, which were converted to aliphatic amines on day four. The GC-MS analysis revealed the disruption of -NN- bond, rupture of -CN- bond, scission of -N-N-bond, and loss of -SO₃H from the Reactive Black dye leading to the formation of an intermediate p-Hydroxy phenylhydrazinyl. The rupture of Reactive red dye resulted in the formation of p-Hydrazinyl toluene sulphonic acid, Naphthyl amine -3,6-disulphonic acid and 8-Hydroxy Naphthyl amine -3,6-disulphonic acid. Decarboxylation, desulphonation, deoxygenation and deamination of Reactive Brown dye showed the presence of different metabolites and metabolic pathways were proposed for the reactive azo dyes which were phytoremediated.

The Multifaceted Function of Water Hyacinth in Maintaining Environmental Sustainability and the Underlying Mechanisms: A Mini Review

Water hyacinth (Eichhornia crassipes) (WH) is a widespread aquatic plant. As a top invasive macrophyte, WH causes enormous economic and ecological losses. To control it, various physical, chemical and biological methods have been developed. However, multiple drawbacks of these methods limited their application. While being a noxious macrophyte, WH has great potential in many areas, such as phytoremediation, manufacture of value-added products, and so on. Resource utilization of WH has enormous benefits and therefore, is a sustainable strategy for its control. In accordance with the increasing urgency of maintaining environmental sustainability, this review concisely introduced up to date WH utilization specifically in pollution remediation and curbing the global warming crisis and discussed the underlying mechanisms.

Safranin-O cationic dye removal from wastewater using carboxymethyl cellulose-grafted-poly(acrylic acid-co-itaconic acid) nanocomposite hydrogel

Copolymer of acrylic acid (AA) and itaconic acid (IA) grafted onto sodium carboxymethyl cellulose hydrogel (CMC-g-poly (AA-co-IA)) was successfully synthesized as an adsorbent to remove safranin-O from wastewater. The swelling and removal efficiencies of CMC-g-poly (AA-co-IA) were enhanced by increasing IA/AA molar ratio as well as by incorporation of montmorillonite clay nano-sheets (MMT). The surface area of MMT, CMC-g-poly (AA-co-IA), and CMC-g-poly (AA-co-IA) samples was 15.632, 0.61452, and 0.66584 m²/g, respectively, indicating the effectiveness of MMT nano-sheets in improving hydrogel surface area. The maximum removal efficiency of CMC-g-poly (AA-co-IA)/MMT under optimum conditions i.e., pH of 8, initial concentration of 10 mg/L, adsorbent dose of 2 g/L, and contact time of 40 min was ascertained 99.78% using a response surface methodology-central composite design (RSM-CCD). Pseudo-second-order and Langmuir models giving the maximum monolayer adsorption capacity of 18.5185 mg/g and 19.1205 mg/g for CMC-g-poly (AA-co-IA) and CMC-g-poly (AA-co-IA)/MMT samples, respectively are the best-fitted models for kinetic and equilibrium data. Thermodynamically, safranin-O decontamination was spontaneous, exothermic, and entropy decreasing. Moreover, ad (de)sorption behavior study showed that CMC-g-poly (AA-co-IA)/MMT performance was not changed after multiple recovery steps. Therefore, CMC-g-poly (AA-co-IA)/MMT was considered as a highly potential adsorbent for safranin-O removal from wastewater.

Kinetic Evaluation for Removal of an Anionic Diazo Direct Red 28 by Using Phytoremediation Potential of Salvinia molesta Mitchell

The dye removal using phytoremediation has demonstrated its potential to degrade many recalcitrant dyes. The kinetic investigations for phytoremediation ability of Salvinia molesta Mitchell (S. molesta) were evaluated for Direct Red 28 (DR28) dye in the present research work. The potential of S. molesta was analysed at different pH and different initial dye concentrations. About 90 % of dye decolorization was achieved for 50 mg L^-1 dye solution with 4 g of S. molesta plant at pH 6.5. The experimental results were evaluated with pseudo-first, pseudo-second and Elovich kinetic models. The validation indicated the most suitable curve with Pseudo-second order having the correlation value R² ≥ 0.99. FTIR studies supported the phytoextraction of DR28 through functional group interaction between plant hairy roots and dye molecules. The results of the present studies suggests that S. molesta can be utilized for remediation of water bodies and wetlands contaminated with dye wastewater in natural conditions.

A review on application of phytoremediation technique for eradication of synthetic dyes by using ornamental plants

Phytoremediation emerges as an innovative and eco-friendly technique to remediate textile dyes with the use of various categories of plants. In recent years, ornamental plants emerge as more attractive and effective substitute in comparison to edible plants for phytoremediation. Regardless of aesthetic value, some ornamental plants can be grown to remediate the sites contaminated with dyes, heavy metals, pesticides, or other organic compounds. In this review, we focus on pioneer research on synthetic dye removal using ornamental plants and evaluate the phytoremediation capability of ornamental plants for treatment of textile effluent. This paper also emphasized specific ornamental plants having high accumulation and tolerance ability for removal of dyes. The mechanisms explored for the phytoremediation of dyes by ornamental plants have also been explained. This review will also be helpful for researchers for exploring more new ornamental plants in phytoremediation technique.

Removal of organic pollutants in water using water hyacinth (Eichhornia crassipes)

Globally, water hyacinth is recognized as an invasive species that threatens the survival of aquatic organisms. Its removal from water is performed manually or physically to avoid the secondary water pollution that results through the usage of chemically synthesised herbicides for its control, thus generating solid waste. Among other things, scientists have proposed the conversion of this waste into adsorbents that can be utilized for the remediation of water resources. This is essentially significant as the quality of water remains a necessity in all spheres of life. In this paper, the remediation strategies that have been proposed for the remediation of water resources through the removal of organic pollutants using water hyacinth are reviewed. Phytoremediation and removal of organics through adsorption using water hyacinth have been extensively investigated. From this review, it can be observed that the majority of the reviewed work focussed more on the removal of organic dyes from water. In this context, the mechanisms involved during the adsorption processes are discussed. In the end, future research that is likely to assist in the environmental management of water resources through their remediation with water hyacinth is suggested.

Preparation of Pd–Ni Nanoparticles Supported on Activated Carbon for Efficient Removal of Basic Blue 3 from Water

Pd–Ni nanoparticles supported on activated carbon (Pd–Ni/AC) were prepared using a phase transfer method. The purpose of synthesizing ternary composites was to enhance the surface area of synthesized Pd–Ni nanoparticles, as they have a low surface area. The resulting composite was characterized by scanning electronic microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX) for investigating its surface morphology, particle size, percentage of crystallinity and elemental composition, respectively. The XRD data and EDX analysis revealed the presence of Pd–Ni alloys impregnated on the AC. Pd–Ni/AC was used as an adsorbent for the removal of the azo dye basic blue 3 from an aqueous medium. Kinetic and isotherm models were used to calculate the adsorption parameters. The most suitable kinetic model amongst the applied models was the pseudo-second-order model, confirming the chemisorption characteristics of the process, and the most suitable isotherm model was the Langmuir model, with a maximum adsorption capacity of 333 mg/g at 333 K. Different experimental parameters, such as the adsorbent dosage, pH, temperature and contact time, were optimized. The optimum parameters reached were: a pH of 12, temperature of 333 K, adsorbent dosage of 0.01 g and optimum contact time of 30 min. Moreover, the thermodynamics parameters of adsorption, such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°), showed the adsorption processes being exothermic with values of ΔH° equal to −6.206 kJ/mol and being spontaneous with ΔG° values of −13.297, −13.780 and −14.264 kJ/mol, respectively at 293, 313 and 333 K. An increase in entropy change (ΔS°) with a value of 0.0242 kJ/mol K, indicated the enhanced disorder at a solid–solution interface during the adsorption process. Recycling the adsorbent for six cycles with sodium hydroxide and ethanol showed a decline in the efficiency of the selected azo dye basic blue 3 up to 79%. The prepared ternary composite was found effective in the removal of the selected dye. The removal of other pollutants represents one of the possible future uses of the prepared adsorbent, but further experiments are required.