Effects of process factors on the performance of electrochemical disinfection for wastewater in a continuous-flow cell reactor

Formation and control of disinfection by-products during the trichloroisocyanuric acid disinfection in swimming pool water

The increasing demand for trichloroisocyanuric acid (TCCA) in swimming pool disinfection highlights the need to evaluate its applicability in terms of disinfection by-product (DBP) formation. Nevertheless, there is limited understanding of DBP formation and control during TCCA disinfection, particularly concerning the effects of various management parameters. This study aimed to fill this knowledge gap by comprehensively investigating DBP formation during TCCA chlorination, with a particular focus on assessing the contribution and interaction of influencing factors using Box-Behnken Design and response surface methodology. Results indicated that the concentrations of trichloroacetaldehyde, chloroform, dichloroacetic acid, trichloroacetic acid, and dichloroacetonitrile produced by TCCA disinfectant were 42.5%, 74.0%, 48.1%, 94.7% and 42.6% of those by the conventional sodium hypochlorite disinfectant, respectively. Temperature exhibited the most significant impact on chloroform formation (49%), while pH played a major role in trichloroacetaldehyde formation (44%). pH2 emerged as the primary contributor to dichloroacetic acid (90%) and trichloroacetic acid (93%) formation. The optimum water quality conditions were determined based on the minimum total DBPs (pH = 7.32, Temperature = 23.7 °C, [Cl-] = 437 mg/L). Chlorine dosage and contact time exhibited greater influence than precursor concentration on chloroform, dichloroacetonitrile, trichloroacetaldehyde, trichloroacetic acid, and total DBPs. Although the interaction between water quality parameters was weak, the interaction between disinfection operating parameters demonstrated substantial effects on DBP formation (8.56-19.06%). Furthermore, the DBP predictive models during TCCA disinfection were provided for the first time, which provides valuable insights for DBP control and early warning programs.

Advances on electrochemical disinfection research: Mechanisms, influencing factors and applications

Disinfection, a vital barrier against pathogenic microorganisms, is crucial in halting the spread of waterborne diseases. Electrochemical methods have been extensively researched and implemented for the inactivation of pathogenic microorganisms from water and wastewater, primarily owing to their simplicity, efficiency, and eco-friendliness. This review succinctly outlined the core mechanisms of electrochemical disinfection (ED) and systematically examined the factors influencing its efficacy, including anode materials, system conditions, and target species. Additionally, the practical application of ED in water and wastewater treatment was comprehensively reviewed. Case studies involving various scenarios such as drinking water, hospital wastewater, black water, rainwater, and ballast water provided concrete instances of the expansive utility of ED. Finally, coupling ED with other technologies and the resulting synergies were introduced as pivotal foundations for subsequent engineering advancements.

Water treatment and reclamation by implementing electrochemical systems with constructed wetlands

Seasonal or permanent water scarcity in off-grid communities can be alleviated by recycling water in decentralized wastewater treatment systems. Nature-based solutions, such as constructed wetlands (CWs), have become popular solutions for sanitation in remote locations. Although typical CWs can efficiently remove solids and organics to meet water reuse standards, polishing remains necessary for other parameters, such as pathogens, nutrients, and recalcitrant pollutants. Different CW designs and CWs coupled with electrochemical technologies have been proposed to improve treatment efficiency. Electrochemical systems (ECs) have been either implemented within the CW bed (ECin-CW) or as a stage in a sequential treatment (CW + EC). A large body of literature has focused on ECin-CW, and multiple scaled-up systems have recently been successfully implemented, primarily to remove recalcitrant organics. Conversely, only a few reports have explored the opportunity to polish CW effluents in a downstream electrochemical module for the electro-oxidation of micropollutants or electro-disinfection of pathogens to meet more stringent water reuse standards. This paper aims to critically review the opportunities, challenges, and future research directions of the different couplings of CW with EC as a decentralized technology for water treatment and recovery.

Insights of metallic nanoparticles and ions in accelerating the bacterial uptake of antibiotic resistance genes

The increasing release of nanomaterials has attracted significant concerns for human and environmental health. Similarly, the dissemination of antimicrobial resistance (AMR) is a global health crisis affecting approximately 700,000 people a year. However, a knowledge gap persists between the spread of AMR and nanomaterials. This study aims to fill this gap by investigating whether and how nanomaterials could directly facilitate the dissemination of AMR through horizontal gene transfer. Our results show that commonly-used nanoparticles (NPs) (Ag, CuO and ZnO NPs) and their ion forms (Ag⁺, Cu²⁺ and Zn²⁺) at realistic concentrations within aquatic environments can significantly promote the transformation of extracellular antibiotic resistance genes in Acinetobacter baylyi ADP1 by a factor of 11.0-folds, which is comparable to the effects of antibiotics. The enhanced transformation by Ag NPs/Ag⁺ and CuO NPs/Cu²⁺ was primarily associated with the overproduction of reactive oxygen species and cell membrane damage. ZnO NPs/Zn²⁺ might increase the natural transformation rate by stimulating the stress response and ATP synthesis. All tested NPs/ions resulted in upregulating the competence and SOS response-associated genes. These findings highlight a new concern that nanomaterials can speed up the spread of AMR, which should not be ignored when assessing the holistic risk of nanomaterials.