Degradation of pesticides present in tomato rinse water by direct photolysis and UVC/H2O2: optimization of process conditions through sequential Doehlert design

Photochemical Degradation of the New Nicotine Pesticide Acetamiprid in Water

Acetamiprid is a novel nicotinic pesticide widely used in modern agriculture because of its low toxicity and specific biological target properties. The objective of this study was to understand the photolysis pattern of acetamiprid in the water column and elucidate its degradation products and mechanism. It was observed that acetamiprid exhibited different photolysis rates under different light source conditions in pure water, with ultraviolet > fluorescence > sunlight; furthermore, its photolysis half-life ranged from 17.3 to 28.6 h. In addition, alkaline conditions (pH 9.0) accelerated its photolysis rate, which increased with pH. Using gas chromatography-mass spectrometry, five direct photolysis products generated during the exposure of acetamiprid to pure water were successfully separated and identified. The molecular structure of acetamiprid was further analyzed using density functional theory, and the active photodegradation sites of acetamiprid were predicted. The mechanism of the photolytic transformation of acetamiprid in water was mainly related to hydroxyl substitution and oxidation. Based on these findings, a comprehensive transformation pathway for acetamiprid was proposed.

A review on the management of rinse wastewater in the agricultural sector

Pesticides have become indispensable compounds to sustain global food production. However, a series of sustainable agricultural practices must be ensured to minimize health and environmental risks, such as eco-friendly cultivation techniques, the transition to biopesticides, appropriate hygiene measures, etc. Hygiene measures should include the management of rinse wastewater (RWW) produced when cleaning agricultural equipment and machinery contaminated with pesticides (among other pollutants), such as sprayers or containers. Although some technical guidelines encourage the reuse of RWW in agricultural fields, in many cases the application of specialized treatments is a more environmentally friendly option. Solar photocatalysis was found to be the most widely studied physical-chemical method, especially in regions with intense solar radiation, generally using catalysts such as TiO2, Na2S2O8, and H2O2, operating for relatively short treatment periods (usually from 10 min to 9 h) and requiring accumulated radiation levels typically ranging from 3000 to 10000 kJ m-2. Biological treatments seem to be particularly suitable for this application. Among them, biobed is a well-established and robust technology for the treatment of pesticide-concentrated water in some countries, with operating periods that typically range from 1 to 24 months, and with temperatures preferably close to 20 °C; but further research is required for its implementation in other regions and/or conditions. Solar photocatalysis and biobeds are the only two systems that have been tested in full-scale treatments. Alternatively, fungal bioremediation using white rot fungi has shown excellent efficiencies in the degradation of pesticides from agricultural wastewater. However, greater efforts should be invested in gathering more information to consolidate these technologies and expand their use in the agricultural sector.

Bibliometric analysis of Advanced Oxidation Processes studies with a focus on Life Cycle Assessment and Costs

Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015-2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.

Stochastic dynamic ultraviolet photofragmentation and high collision energy dissociation mass spectrometric kinetics of triadimenol and sucralose

The major goal of the paper is to provide empirical proof of view that innovative stochastic dynamic mass spectrometric equation D″_SD = 2.6388·10^-17·(< I² >  -  < I > ²) determines the exact analyte concentration in solution via quantifying experimental variable intensity (I) of an analyte ion per any short span of scan time of any measurement, which also appears applicable to quantify laser-induced ultraviolet photofragmentation and high energy collision dissociation mass spectrometric processes. Triadimenol (1) and sucralose (2) using positive and negative polarity are examined. Laser irradiation energy λ_ex = 213 nm is utilized. The issue is of central importance for monitoring organic micro-pollutants in surface, ground, and drinking water as well as tasks of risk assessment for environment and human health from contamination with organics. Despite the significant importance of the topic, answering the question of functional kinetic relations of such processes is by no means straightforward, so far, due to a lack of in-depth knowledge of mechanistic aspects of fragment paths of analytes in environment and foods as well as kinetics of processes under ultraviolet laser irradiation. Although there is truth in the classical theory of first-order reaction kinetics, it does not describe all kinetic data on analytes (1) and (2). A new damped sine wave functional response to a large amount of kinetics is presented. High-resolution mass spectrometric data and chemometrics are used. The study provides empirical evidence for claim that temporal behavior of mass spectrometric variable intensity under negative polarity obeys a certain scientific law written by means of equation above. It is the same for positive and negative soft-ionization mass spectrometric conditions.

1-Tetradecanol, Diethyl Phthalate and Tween 80 Assist in the Formation of Thermo-Responsive Azoxystrobin Nanoparticles

The occurrence of crop fungal diseases is closely related to warm environmental conditions. In order to control the release of fungicides in response to warm conditions, and enhance the efficacy, a series of thermo-responsive fungicide-loaded nanoparticles were developed. The fungicide azoxystrobin, solvent DEP, emulsifier Tween 80 and thermo-responsive component TDA were combined to create thermal-response oil phases, conditions for emulsification were then optimized. LDLS, zeta potential, FTIR, DSC, TGA, XRD, SEM and antifungal efficacy assays were carried out to investigate the characteristics and forming mechanism. The results indicated that the formula with 5 g azoxystrobin, 10 mL DEP, 6 mL Tween 80 and 2.5 g TDA constructed the proposed oil phase with the ability to transform from solid at 20 °C to softerned at 31.5 °C. Both DEP and TDA played key roles in interfering with the crystallization of azoxystrobin. The optimal T3t-c12 nanoparticles had a mean particle size of 162.1 nm, thermo-responsive morphological transformation between 20 °C and 30 °C, AZO crystal reforming after drying, the ability to attach to fungal spores and satisfied antifungal efficacy against P. nicotiana PNgz07 and A. niger A1513 at 30 °C. This report provides referable technical support for the construction of smart-release nanoparticles of other agrochemicals.

Photolysis for the Removal and Transformation of Pesticide Residues During Food Processing: A State-of-the-Art Minireview

Pesticide residues are of great significant issue that exerted adverse effects on humans. There is a need for effective and non-toxic decontamination of pesticide residues during food processing. In this minireview, the recent advances in the degradation of pesticide residues by photolysis have been firstly described during food processing. The mechanisms of pesticide residues destruction by photolysis were discussed accordingly. Finally, applications of photolysis in the degradation of pesticide residues from beverages, fresh produce, and food rinse waste were also summarized.

A Multi-Criteria Decision-Making Approach to Evaluate Different UVC/H2O2 Systems in Wastewater Treatment

High azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD) pesticide removal rates in sixteen bench-scale experiments concerning tomato washing water treatment were obtained through a UVC/H2O2 advanced oxidative process. Experimental conditions ([H2O2]0) and irradiance (EUVC) were optimized for higher degradation rates (pseudo-first-order reaction). To consider both economic aspects and environmental impacts when defining the treatment technology, as well as technological requirements, this study applied a multi-criteria decision-making method (MCDM) to assess and differentiate similar UVC/H2O2 process configurations. This allowed for the identification of the cheapest experimental arrangement with the lowest associated environmental impacts, coupled to the highest degradation rate (kIMD). After consulting experts to determine the importance of the applied criteria and measuring alternative performances, experiment E7 ([H2O2]0 = 43.5 mg L−1; EUVC = 15.0 W m−2; kIMD = 0.236 s−1) was determined as meeting the three criteria in a balanced manner. Although E7′s technological performance regarding degradation rate did not achieve the best individual result, it presented the lowest impacts and costs among the analyzed series, although alternatives are sensitive to decision-maker priorities. This study considered different factors of a process displaying potential industrial applications still in the design stage to achieve a more efficient and balanced solution.