Transformation of CuS/ZnS nanomaterials to an efficient visible light photocatalyst by 'photosensitizer' graphene and the potential antimicrobial activities of the nanocomposites

Two novel low molecular weight gelator-driven supramolecular metallogels efficient in antimicrobial activity applications

A remarkable ultrasonication technique was successfully employed to create two novel metallogels using citric acid as a low molecular weight gelator, in combination with cadmium(ii)-acetate and mercury(ii)-acetate dissolved in N,N-dimethyl formamide at room temperature and under ambient conditions. The mechanical properties of the resulting Cd(ii)- and Hg(ii)-metallogels were rigorously examined through rheological analyses, which revealed their robust mechanical stability under varying angular frequencies and shear strains. Detailed characterization of the chemical constituents within these metallogels was accomplished through EDX mapping experiments, while microstructural features were visualized using field emission scanning electron microscope (FESEM) images. Additionally, FT-IR spectroscopic analysis was employed to elucidate the metallogel formation mechanism. Significantly, the antimicrobial efficacy of these novel metallogels was assessed against a panel of bacteria, including Gram-positive strains such as Bacillus subtilis and Staphylococcus epidermidis, as well as Gram-negative species like Escherichia coli and Pseudomonas aeruginosa. The results demonstrated substantial antibacterial activity, highlighting the potential of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels as effective agents against a broad spectrum of bacteria. In conclusion, this study provides a comprehensive exploration of the synthesis, characterization, and antimicrobial properties of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels, shedding light on their promising applications in combating both Gram-positive and Gram-negative bacterial infections. These findings open up exciting prospects for the development of advanced materials with multifaceted industrial and biomedical uses.

Insight into the 4-nitrophenol reduction, supercapacitive behavior, and antimicrobial activity of ZnCo2O4-rGO nanocomposite fabricated by the simple reflux method

In this article, binary oxide ZnCo2O4 nanoparticles (NPs) have been developed on reduced graphene oxide surface by simple reflux condensation method. The physicochemical characteristics of the synthesized nanocomposite were computed using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and UV-Visible spectroscopy. The average size of ZnCo2O4 NPs is found to be about 9 nm. The synthesized nanocomposite was found to be an extremely efficient catalyst for reduction of 4-nitrophenol (4-NP) to produce 4-aminophenol (4-AP) and it is exhibited that about 98% 4-nitrophenol can be reduced in only 20 min. The nanocomposite behaves as supercapacitor due to possessing the specific capacitance value up to 609 F/g and excellent capacitance retention over 1000 cycles. The Brunauer-Emmett-Teller (BET) surface area analysis has been conducted to evaluate surface area and pore size of the synthesized material. The antimicrobial activity of this nanocomposite was performed against bacterial strains of Escherichia coli (E. coli), Bacillus subtilis (B. subtilis), and Staphylococcus aureus (S. aureus) and it is noticed to be a good antimicrobial agent against different bacterial strains.

Effective Visible-Light-Driven Photocatalytic Degradation of Harmful Antibiotics Using Reduced Graphene Oxide-Zinc Sulfide-Copper Sulfide Nanocomposites as a Catalyst

In recent decades, antibiotics have been found in aquatic environments, raising severe concerns. In this study, a unique reduced graphene oxide-zinc sulfide-copper sulfide (rGO-ZnS-CuS) nanocomposite (NC) prepared by using a straightforward surfactant-free in situ microwave method was used for antibiotic degradation via photocatalysis. The structural and morphological characteristics of the produced catalysts were characterized using various techniques, confirming the successful development of nanocomposite structures of better quality than that of the pure samples. The photocatalytic degradation of antibiotics containing ofloxacin was also investigated. The results suggest that the rGO-ZCS NC outperformed the other composites in terms of photocatalytic activity toward ofloxacin degradation. Superoxide and hydroxyl radicals were the main active species during the degradation process. According to our results, the catalytic activity of rGO-ZCS NC is much better than that of the other composites.

Delicate Design of ZnS@In2S3 Core-Shell Structures with Modulated Photocatalytic Performance under Simulated Sunlight Irradiation

ZnS@In₂S₃ core-shell structures with high photocatalytic activity have been delicately designed and synthesized. The unique structure and synergistic effects of the composites have an important influence on the improvement of photocatalytic activity. The photocatalytic activity has been studied by photodegrading individual eosin B (EB) and the mixture solution consisting of eosin B and rhodamine B (EB-RhB) in the presence of hydrogen peroxide (H₂O₂) under simulated sunlight irradiation. The results show that all of the photocatalysts with different contents of In₂S₃ exhibit enhanced catalytic activity compared to pure ZnS for the degradation of EB and EB-RhB solution. When the theoretical molar ratio of ZnS to In₂S₃ was 1:0.5, the composite presents the highest photocatalytic efficiency, which could eliminate more than 98% of EB and 94% of EB-RhB. At the same time, after five cycles of photocatalytic tests, the photocatalytic efficiency could be about 96% for the degradation of the EB solution, and relatively high photocatalytic activity could also be obtained for the degradation of the EB-RhB mixed solution. This work has proposed a facile synthetic process to realize the controlled preparation of core-shell ZnS@In₂S₃ composites with effectively modulated structures and compositions, and the composites have also proved to be high-efficiency photocatalysts for the disposal of complicated pollutants.

Impact of bandgap tuning on ZnS for degradation of environmental pollutants and disinfection

The materials showing multiple applications are appealing for their practical use and industrial production. To realize the suitable property for various applications, we have produced ZnS (sf-ZnS) and metal-doped ZnS nanoflakes (sf-m-ZnS; where m = Cu, Ni, Cd, Bi, or Mn) and correlated their activity with bandgap variation. We obtained all these materials via hexamethyldisilazane (HMDS)-assisted synthetic method without using any surfactants, polymers, or template molecules and characterized them thoroughly using various techniques. Photocatalytic, as well as antibacterial, activities of these materials showed their bifunctional utility. We have demonstrated the effect of doping and consequent extension of absorption band to the visible region and resultant improved photocatalytic activity under sunlight. Thus, the change in bandgap influenced their performance as photocatalysts. Among all materials produced, sf-Cd-ZnS provided superior results as a photocatalyst while degrading two organic pollutants-rhodamine B (RhB) and methylene blue (MB) in water. The antibacterial activity of sf-ZnS and sf-m-ZnS against Gram-positive bacteria, i.e., Staphylococcus aureus (S. aureus), was examined by the zone of inhibition method, wherein sf-Ni-ZnS showed maximum activity. The enhanced activity of these ZnS materials can be attributed to the free surface of nanoparticles without any capping by organic molecules, which provided an intimate interaction of inorganic semiconductor material with organic and biomolecules. Thus, we have demonstrated modification of properties both by bandgap tuning of materials and providing the opportunity for intimate interaction of materials with substrates. The photocatalytic activity and antibacterial action of metal-doped ZnS produced by our method exhibited their potential for environmental remediation, specifically water purification.

Hydrogen peroxide-assisted photocatalytic dye degradation over reduced graphene oxide integrated ZnCr2O4 nanoparticles

Zinc chromite nanoparticles (NPs) and zinc chromite-reduced graphene oxide (ZnCr₂O₄-rGO) nanocomposite have been synthesized by the combined effects of reflux condensation and calcination processes. The structural properties were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), UV-visible studies, etc. Structural morphology was investigated by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) that indicate the formation of particles in the nanometer regime. The presence of the elements Zn, Cr, O and C has been confirmed by energy-dispersive X-ray spectroscopy (EDX) images which show the purity of the synthesized products. The photocatalytic activities of both as-prepared samples under visible light irradiation were investigated in presence of hydrogen peroxide (H₂O₂) and the results show that ZnCr₂O₄-rGO nanocomposite has a quite higher photo-activity response than virgin ZnCr₂O₄ NPs. The enhanced photo response indicates that, in ZnCr₂O₄, the photo-induced electrons favor to transfer to the rGO surface and the recombination of electron-hole pairs inhibited for which it results in the significantly increased photocatalytic activity for the ZnCr₂O₄-rGO photocatalyst and this phenomenon is also supported by the band gap value and photoluminescence results. Our outcomes demonstrate that ZnCr₂O₄-rGO nanocomposite is a more promising material to build up an efficient photocatalyst for waste water treatment.

Template-free synthesis of Mn2+ doped hierarchical CuS yolk-shell microspheres for photocatalytic reduction of Cr(VI)

Yolk-shell structures have been widely used in catalysis and energy storage in recent years because they improve the efficiency of charge utilization by enhancing light scattering and creating more active...