A new supported Cu/Pd bimetallic nanoparticles composites prestoring reductant for nitrate removal: high reactivity and N2 selectivity

The effect of carbonized zeolitic imidazolate framework-67 (ZIF-67) support on the reactivity and selectivity of bimetal-catalytic aqueous NO3- reduction

A metallic catalyst, Cobalt N-doped Carbon (Co@NC), was obtained from Zeolitic-Imidazolate Framework-67 (ZIF-67) for efficient aqueous nitrate (NO3-) removal. This advanced catalyst indicated remarkable efficiency by generating valuable ammonium (NH3/NH4+) via an environmentally friendly production technique during the nitrate treatment. Among various metals (Cu, Pt, Pd, Sn, Ru, and Ni), 3.6%Pt-Co@NC exhibited an exceptional nitrate removal, demonstrating a complete removal of 60 mg/L NO3--N (265 mg/L NO3-) in 30 min with the fastest removal kinetics (11.4 × 10-2 min-1) and 99.5% NH4+ selectivity. The synergistic effect of bimetallic Pt-Co@NC led to 100% aqueous NO3- removal, outperforming the reactivity by bare ZIF-67 (3.67%). The XPS analysis illustrated Co's promotor role for NO3- reduction to less oxidized nitrogen species and Pt's hydrogenation role for further reduction to NH4+. The durability test revealed a slight decrease in NO3- removal, which started from the third cycle (95%) and slowly proceeded to the sixth cycle (80.2%), while NH4+ selectivity exceeded 82% with no notable Co or Pt leaching throughout seven consecutive cycles. This research shed light on the significance of the impregnated Pt metal and Co exposed on the Co@NC surface for the catalytic nitrate treatment, leading to a sustainable approach for the effective removal of nitrate and economical NH4+ production.

Electrocatalytic reduction of nitrate to ammonia by Pd/In modified Nickel foam electrode in aqueous solution

Nitrate pollution in surface water and ground water has drawn wide attention, which has brought challenges to human health and natural ecology. Electroreduction of nitrate to NH3 in waste water was a way to turn waste into wealth, which has attracted interest of many researchers. Using Nickel foam as substrate, we prepared Pd/In bimetallic electrode (NF-Pd/In) according to a two-step electrodeposition method. There are many irregularly shaped particles in the size range of 10 nm-100 nm accumulated on the surface of prepared NF-Pd/In electrode, which could supply high specific area and more active sites for nitrate electroreduction. FESEM-EDS, XRD and XPS analysis confirmed the uniform distribution of Pd and In on the surface of prepared NF-Pd/In electrode, with a mass ratio of 4.5/1. Above 96% of 100 mg/L NO3--N was removed and 95% of NH3 selectivity was reached after 5 h of reaction under -1.6 V vs. Ag/AgCl sat. KCl when using 0.05 mol/L of Na2SO4 as electrolyte. High concentration of NaCl (0.05 mol/L) in the test solution dramatically decreased the NH3 selectivity because the produced NH3 could be further oxidized to N2 by the formed HClO from Cl-. EIS tests indicated that the prepared NF-Pd/In electrode showed much lower electrode resistance than NF due to the adsorptive property and electrocatalytic ability for nitrate removal. Density functional theory (DFT) calculations indicated that the presence of In could promote the conversion of NO3- to *NO3 during the process of nitrate electroreduction to NH3. Circulating tests demonstrated the stability of prepared NF-Pd/In electrode.

Advances in iron-based electrocatalysts for nitrate reduction

Excessive nitrate has been a critical issue in the water environment, originating from the burning of fossil fuels, inefficient use of nitrogen fertilizers, and discharge of domestic and industrial wastewater. Among the effective treatments for nitrate reduction, electrocatalysis has become an advanced technique because it uses electrons as green reducing agents and can achieve high selectivity through cathode potential control. The effectiveness of electrocatalytic nitrate reduction (NO₃RR) mainly lies in the electrocatalyst. Iron-based catalysts have the advantages of high activity and low cost, which are well-used in the field of electrocatalytic nitrates. A comprehensive overview of the electrocatalytic mechanism and the iron-based materials for NO₃RR are given in terms of monometallic iron-based materials as well as bimetallic and oxide iron-based materials. A detailed introduction to NO₃RR on zero valent iron, single-atom iron catalysts, and Cu/Fe-based bimetallic electrocatalysts are provided, as they are essential for the improvement of NO₃RR performance. Finally, the advantages of iron-based materials for NO₃RR and the problems in current applications are summarized, and the development prospects of efficient iron-based catalysts are proposed.

Micro-electrolysis based nitrate reduction from aqueous solution by CNTs-Al-Cu composite under alkaline environment

CNTs-Al was prepared by ball milling combined with sintering process and then used for CNTs-Al-Cu synthesis with chemical deposition method. The obtained CNTs-Al-Cu composite was systematically characterized and its NO₃^--N reduction performance under alkaline condition was also evaluated. As indicated by the reduction batch experiment, 80.2% of NO₃^--N removal efficiency was obtained in 90 min at pH of 9. The product of the reduction process was dominated by NO₂^--N, which was further reduced to harmless N₂. The reusability of CNTs-Al-Cu composite was evaluated, and the experiment results showed that 68.1% of NO₃^--N removal efficiency was maintained after 3 cycles of regeneration. Finally, based on the characterization results and kinetic analysis, it was concluded that micro-electrolysis was mainly responsible for the removal of NO₃^--N by CNTs-Al-Cu.

Preparing Pd/Sn modified nickel foam electrode for nitrate removal from aqueous solutions

Nitrate pollution in ground water and surface water has been becoming a worldwide problem that poses a great challenge to steady water ecosystem and human health. Electrochemical reduction is a promising way to remove nitrate from water because of advantages. We prepared Pd/Sn modified nickel foam (NF) electrode according to a two-step electrodeposition method. The prepared NF-Pd/Sn electrode showed a micromorphology like "Karst Fengcong" with peaks, saddles and nadirs intertwined with each other. Pd⁰ and Sn⁰ were detected on the NF-Pd/Sn electrode and the mass ratio of Pd/Sn was 4.3/1. The NF-Pd/Sn electrode showed the highest reaction rate (k_obs: 0.543 h^-1) and removal efficiency (94%) under the condition of 100 mg N/L, 0.05 mol/L Na₂SO₄ and -1.6 V vs. Ag/AgCl sat. KCl. The highest N₂-selectivity (100%) was reached under the condition of 100 mg N/L, 0.05 mol/L NaCl and -1.6 V vs. Ag/AgCl sat. KCl. The microstructure of NF-Pd/Sn electrode like "Karst Fengcong" could provide large specific surface area and more active sites for nitrate adsorption and electrocatalytic reduction in aqueous solution. The adsorption and the reduction reaction of nitrate on the surface of NF-Pd/Sn could increase the electric current response in the test system.