Application of microbial electrochemical technologies for the treatment of petrochemical wastewater with concomitant valuable recovery: A review

Pollutants removal and connections among sludge properties, metabolism potential and microbial characteristics in aerobic granular sequencing batch reactor for petrochemical wastewater treatment

Petrochemical wastewater contains inhibitory compounds such as aromatics that are toxic to microorganisms during biological treatment. The compact and layered structure and the high amount of extracellular polymeric substances (EPS) in aerobic granular sludge (AGS) can contribute to protecting microorganisms from the harsh environment. This study evaluated the changes in the granule properties, pollutants removal, microbial metabolic potential and molecular microbial characteristics of the AGS process for petrochemical wastewater treatment. Granules treating petrochemical wastewater had a higher SVI30/SVI5 value (0.94) than that treating synthetic wastewater. An increase in bioactivity and EPS secretion with higher bio-polymer composition, specifically the functional groups such as hydroxyl, alkoxy and amino in protein, was observed, which promoted biomass aggregation. The granules also had more than 2-fold higher specific oxygen utilization rate. The AGS-SBR process obtained an average COD removal of 93% during petrochemical wastewater treatment and an effluent bCOD of below 1 mg L-1. No obvious inhibition of nitrification and denitrification activity was observed in the processes attributed to the layered structure of AGS. The average effluent NH4+-N of 5.0 mg L-1 was obtained and TN removal efficiencies of over 80.0% was achieved. Molecular microbial analysis showed that abundant functional genera Stenotrophomonas and Pseudoxanthomonas contributed to the degradation of aromatics and other petroleum organic pollutants. They were enriched with the variation of group behavior while metabolisms of amino acids and carboxylic acids by the relevant functional genera (e.g., Cytophagia) were significantly inhibited. The enrichment of Flavobacterium and Thermomonas promoted nitrification and denitrification, respectively. This research revealed the rapid start-up, enhanced granule structural strength, high inhibition resistance and considerable performance of AGS-SBR for petrochemical wastewater treatment.

Role of bacterial quorum sensing and quenching mechanism in the efficient operation of microbial electrochemical technologies: A state-of-the-art review

Microbial electrochemical technologies (METs) are a group of innovative technologies that produce valuables like bioelectricity and biofuels with the simultaneous treatment of wastewater from microorganisms known as electroactive microorganisms. The electroactive microorganisms are capable of transferring electrons to the anode of a MET through various metabolic pathways such as direct (via cytochrome or pili) or indirect (through transporters) transfer. Though this technology is promising, the inferior yield of valuables and the high cost of reactor fabrication are presently impeding the large-scale application of this technology. Therefore, to overcome these major bottlenecks, a lot of research has been dedicated to the application of bacterial signalling, for instance, quorum sensing (QS) and quorum quenching (QQ) mechanisms in METs to improve its efficacy in order to achieve a higher power density and to make it more cost-effective. The QS circuit in bacteria produces auto-inducer signal molecules, which enhances the biofilm-forming ability and regulates the bacterial attachment on the electrode of METs. On the other hand, the QQ circuit can effectively function as an antifouling agent for the membranes used in METs and microbial membrane bioreactors, which is imperative for their stable long-term operation. This state-of-the-art review thus distinctly describes in detail the interaction between the QQ and QS systems in bacteria employed in METs to generate value-added by-products, antifouling strategies, and the recent applications of the signalling mechanisms in METs to improve their yield. Further, the article also throws some light on the recent advancements and the challenges faced while incorporating QS and QQ mechanisms in various types of METs. Thus, this review article will help budding researchers in upscaling METs with the integration of the QS signalling mechanism in METs.

Appraising efficacy of existing and advanced technologies for the remediation of beta-blockers from wastewater: A review

The discharge of emerging pollutants, such as beta-blockers (BB), has been recognized as one of the major threats to the environment due to the ecotoxicity associated with these emerging pollutants. The BB are prescribed to treat high blood pressure and cardiovascular diseases; however, even at lower concentration, these pollutants can pose eco-toxic impacts towards aquatic organisms. Additionally, owing to their recalcitrant nature, BB are not effectively removed through conventional technologies, such as activated sludge process, trickling filter and moving bed bioreactor; thus, it is essential to understand the degradation mechanism of BB in established as well as embryonic technologies, like adsorption, electro-oxidation, Fenton process, ultraviolet-based advance oxidation process, ozonation, membrane systems, wetlands and algal treatment. In this regard, this review articulates the recalcitrant nature of BB and their associated removal technologies. Moreover, the major advantages and limitations of these BB removal technologies along with the recent advancements with regard to the application of innovative materials and strategies have also been elucidated. Therefore, the present review intends to aid the researchers in improving the BB removal efficiency of these technologies, thus alleviating the problem of the release of BB into the environment.

Boosting hydrogen production from fermentation effluent of biomass wastes in cylindrical single-chamber microbial electrolysis cell

Microbial electrolysis cells (MECs) are considered as green technologies for H₂ production with simultaneously wastewater treatment. Low H₂ recovery and production rate are two key bottlenecks of MECs fed with real H₂ fermentation effluent of biomass wastes. This work established a 1 L cylindrical single chamber MEC and enriched electroactive anodic biofilms from cow dung compost to overcome the bottlenecks. These MEC components (platinum-coated cylindrical titanium mesh cathode and cylindrical graphite felt anode) were arranged in a concentric configuration. A high H₂ production rate of 6.26 ± 0.23 L L^-1 day^-1 with H₂ yield of 5.75 ± 0.16 L H₂ L^-1 fermentation effluent was achieved at 0.8 V. The degradation of acetate and butyrate (main components of H₂ fermentation effluent) could reach to 95.3 ± 2.1% and 78.4 ± 3.6%, respectively. The microbial community analysis for anode showed the abundance of Geobacter (22.6%), Syntrophomonas (8.7%), and Dysgonomonas (6.3%) which are responsible to complex substrate oxidation, electrical current generation, and H₂ production. These results prove the feasibility of cylindrical single-chamber MEC for high H₂ production rate and high acetate and butyrate removal from H₂ fermentation effluent.

Isolation and test of novel yeast strains with lignin usage capability and phenolic compound resistance

Five yeast fungi strains (i.e., two Cryptococcus albidus, one Candida guillermondii, and two Candida tropicalis) were isolated from sugarcane and tested for their use of lignin as sole carbon source and their potential to grow in the presence of phenol and phenol derivatives (i.e., pentachlorophenol and p-nitrophenol). The full set of isolated yeasts showed ligninolytic activity, achieving at least 36% lignin degradation after 25 days. The C. albidus JS-B1 strain had the highest ligninolytic activity, achieving 27% lignin degradation within 4 days. This increased activity was associated with the production of ligninolytic laccase enzymes. All the tested yeast fungi strains showed growth in the presence of high concentrations of phenolic compounds (i.e., 900 mg/L phenol, 200 mg/L p-nitrophenol, 50 mg/L pentachlorophenol) and showed significant potential for lignin and lignin by-product degradation. Each of these five strains has the potential to be used in biological treatment processes for contaminated effluents from paper pulping and bleaching or phenol and phenol-derivative biodegradation processes for other industrial wastewater effluents.