Cu(II) and Cd(II) removal from aqueous solution with LDH@GO-NH2 and LDH@GO-SH: kinetics and probable mechanism

Innovative recovery of matrix layered double hydroxide from simulated acid mine wastewater for the removal of copper and cadmium from wastewater

This study innovatively added biochar to optimize regulation in the neutralization process of simulated acid mine drainage (AMD) and recovered a new type of matrix layered double hydroxides (MLDH), which can be used to remove copper (Cu(II)) and cadmium (Cd(II)) from wastewater. A series of batch experiments show that MLDH with strong selective removal ability of Cu(II) and Cd(II) can be successfully obtained by adding biochar (BC) at pH = 5 end in the neutralization process. Kinetic and isotherm modeling studies indicated that the removal of Cu(II) and Cd(II) by the MLDH was a chemical multilayer adsorption process. The removal mechanism of Cu(II) and Cd(II) was further analyzed through related characterization analysis with contribution rate calculation: the removal rates of Cu(II) and Cd(II) by ion exchange were 42.7% and 26%, while that by precipitation were 34.5% and 49.9%, respectively. This study can provide a theoretical reference and experimental basis for the recovery and utilization of valuable by-products in AMD and the treatment of heavy metal wastewater.

In Situ Synthesis of MnMgFe-LDH on Biochar for Electrochemical Detection and Removal of Cd2+ in Aqueous Solution

Herein, MnMgFe-layered double hydroxides/biochar (MnMgFe-LDHs/BC) composite was fabricated by immobilizing MnMgFe-LDHs on BC via the coprecipitation method, which was employed as an effective material for the detection and removal of Cd²⁺ from aqueous media. A lamellar structure of MnMgFe-LDHs with abundant surface-hydroxyl groups and various interlayer anions inside present a greater chance of trapping Cd²⁺. Meanwhile, the conductive BC with a porous structure provides numerous channels for the adsorption of Cd²⁺. Using the MnMgFe-LDHs/BC-based sensor, Cd²⁺ can be detected with a low limit of detection down to 0.03 ng/L. The feasibility of detecting Cd²⁺ in paddy water was also carried out, with satisfactory recoveries ranging from 97.3 to 102.3%. In addition, the MnMgFe-LDHs/BC material as an adsorbent was applied to remove Cd²⁺ from water with adsorption capacity of 118 mg/g, and the removal efficiency can reach 91%. These results suggest that the as-prepared MnMgFe-LDHs/BC can serve as a favorable platform for efficient determination and removal of Cd²⁺ in water.