Photocatalytic degradation of methylene blue using polyaniline-based silver-doped zinc sulfide (PANI-Ag/ZnS) composites

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

Structurally colored aramid fabric construction and its application as a recyclable photonic catalyst

Structural colors can be used in fabric coloring due to their bright color and non-fading properties. However, it is still a challenge to construct structural color on high crystallinity, smooth surfaced and yellow colored aramid fabrics. Herein, for the first time, photonic crystals (PCs) with structural color were constructed on aramid fabrics by introducing dopamine to modify aramid fabrics and synthesizing monodisperse high refractive index zinc sulfide nanoparticles (ZnS). The influence of the PC coatings on the structural color, mechanical properties, and thermal stability of the structurally colored aramid fabrics or fibers was further investigated. Moreover, due to the excellent catalytic properties of ZnS and the slow photon effects of PCs, the structurally colored fabrics showed good photocatalytic properties, which will be beneficial in reusing the catalysts, which is crucial to their application in the coloring of fabrics but also facilitates the recycling of waste PC coated aramid fabrics.

Designing, characterization, and evaluation of chitosan-zinc selenide nanoparticles for visible-light-induced degradation of tartrazine and sunset yellow dyes

Employing dyes in different industrial sectors has produced a serious threat to the environment and living organisms of water bodies and land. For the decontamination of such toxic dyes, efforts have been made to develop an efficient, feasible, and low maintenance processes. In this context, chitosan-zinc selenide (CS-ZnSe) nanoparticles were prepared through chemical reduction method as the efficient photocatalysts for the decontamination of toxic dyes through photocatalysis. Photocatalyst's synthesis was confirmed with the help of FTIR spectroscopy. XRD indicated the hexagonal crystal structure of the CS-ZnSe with a crystallite size of 12 nm. SEM micrographs showed the average nano photocatalyst size as 25 nm. EDX analysis was employed to determine the elemental composition of the CS-ZnSe. An excellent photocatalytic degradation efficiency for tartrazine and sunset yellow dyes was obtained using CS-ZnSe. The results showed a 98% and 97% degradation efficiency for tartrazine dye and sunset yellow (SY) dye at optimized conditions of time (3 h), pH (5), dye concentration (30 ppm), catalyst dosage (0.09 g and 0.01 g) , and at a temperature of 35 °C. Findings of the photocatalytic degradation process fitted well with first-order kinetics for both the dyes. Rate constant, 'K' value was found to be 0.001362 min^-1 and 0.001257 min^-1 for tartrazine and SY dyes, respectively. While value for (correlation coefficient, R²) was 0.99307 and 0.99277 for tartrazine and sunset yellow dyes, respectively. Recyclability of the photocatalyst was confirmed using it for consecutive cycles to degrade organic dyes. Results showed that the CH-ZnS possesses excellent efficiency in decontaminating organic dyes from industrial wastewater.

Quantum dot decorated polyaniline plastic as a multifunctional nanocomposite: experimental and theoretical approach

AgO, CoO, and ZnO (ACZ) mixed metal quantum dots (QDs) were synthesized by the sol–gel process. Polyaniline (PANI) was prepared by the chemical-oxidative technique. An in situ approach was used for the synthesis of ACZ decorated PANI plastic nanocomposites (NCs). TEM, FTIR, FESEM, UV-visible, DSC, Raman, photoluminescence, and XRD techniques were used for characterizing the QDs, PANI, and ACZ decorated PANI NCs. Experimental and theoretical (DFT) studies were used to support the results. NCs were studied for their adsorption, magnetic, photocatalytic, electrical, thermal, photoluminescence, antibacterial, and anticorrosive activities. The plastic NCs of size 35 nm (observed from XRD and TEM) were found to be paramagnetic. UV-visible spectroscopy and DFT techniques were used to observe the optical band gap of NCs and show an almost equal band gap i.e., 2.75 eV. In 1.0 M H₂SO₄, the NCs show an 82.0% corrosion inhibition efficiency for mild steel. The adsorption power of the silica gel + NCs packed column was higher than normal silica gel column. A very small low-intensity D band in the Raman spectra confirms defect-free NCs. The photocatalytic activity was observed against methyl-red dye in visible light. The thermal stability of plastic NCs was higher than pure PANI and QDs. The NCs were investigated for bactericidal activity against Gram (positive and negative) microorganisms. The ACZ decorated PANI NCs acted as good nanomaterials for adsorption, separation, magnetic, photocatalytic, photoluminescence, antibacterial, electrical, thermal insulator, and anticorrosive agent.

PANI based plastic NCs shows good adsorption power, anticorrosive and thermal stability. The photocatalytic activity was observed against methyl-red dye. The NCs also shows good magnetic, antibacterial, and electrical properties.