A review of the cost and effectiveness of solutions to address plastic pollution

Improving urban waste management: A comprehensive study on household waste generation and spatial patterns in the Grand Guayaquil Metropolitan Area

This study tackles the growing global concern about municipal waste management, particularly in cities like the Grand Guayaquil Metropolitan Area (GGA). Through realistic field studies on in situ household waste generation and geographic information system (GIS) tools, this work offers a framework to predict the quantities and types of recyclable household waste for any metropolitan area in Latin America. Over 4 weeks, students collected, sorted and weighed recyclable waste types, including plastic, paper, metal, glass and fabric, from 776 sampled household of the GGA. ArcGIS survey tool identified household locations and allowed to survey different socio-demographic features. With the help of ArcGIS interpolation method, the total household waste generation for GGA was predicted, and the classification of the different types of recyclable waste was also spatially distributed for the study area. The report identified notable trends in plastic waste, specifically polyethylene terephthalate waste's steady prevalence and 42% growth rate, emphasizing the importance of enhanced recycling techniques. Spatial density maps showed a heterogeneous waste distribution across the GGA, emphasizing locations with higher waste output. This study demonstrates that improving recyclable waste collection can be accomplished with a moderately cheap expenditure by collaborating with academia to overcome knowledge gaps. This strategy provides opportunities to mitigate the environmental impacts of poor waste management.

Microplastics and environmental effects: investigating the effects of microplastics on aquatic habitats and their impact on human health

Microplastics (MPs) are particles with a diameter of <5 mm. The disposal of plastic waste into the environment poses a significant and pressing issue concern globally. Growing worry has been expressed in recent years over the impact of MPs on both human health and the entire natural ecosystem. MPs impact the feeding and digestive capabilities of marine organisms, as well as hinder the development of plant roots and leaves. Numerous studies have shown that the majority of individuals consume substantial quantities of MPs either through their dietary intake or by inhaling them. MPs have been identified in various human biological samples, such as lungs, stool, placenta, sputum, breast milk, liver, and blood. MPs can cause various illnesses in humans, depending on how they enter the body. Healthy and sustainable ecosystems depend on the proper functioning of microbiota, however, MPs disrupt the balance of microbiota. Also, due to their high surface area compared to their volume and chemical characteristics, MPs act as pollutant absorbers in different environments. Multiple policies and initiatives exist at both the domestic and global levels to mitigate pollution caused by MPs. Various techniques are currently employed to remove MPs, such as biodegradation, filtration systems, incineration, landfill disposal, and recycling, among others. In this review, we will discuss the sources and types of MPs, the presence of MPs in different environments and food, the impact of MPs on human health and microbiota, mechanisms of pollutant adsorption on MPs, and the methods of removing MPs with algae and microbes.

Monitoring CaCO3 Content in Recycled Polypropylene with Raman Spectrometry

As a commonly used filler, CaCO3 frequently finds its way into recycled polypropylene (rPP) as a contaminant during the mechanical recycling process. Given the substantial impact of CaCO3 on the properties of PP materials, close monitoring of their content is important to ensure the quality of rPP. In the present work, Raman spectrometry was employed to develop a rapid, accurate, and convenient method for determining CaCO3 content in rPP. Partial least-squares (PLS) regression was used to construct prediction models. Various spectrum pretreatment methods, including multivariate scatter correction (MSC), standard normal variate transformation (SNV), smoothing, and first derivative, were investigated to improve the model performance. In independent validation, the optimal PLS model reached an R 2 of 0.9735 and a root-mean-square error of prediction (RMSEP) of 2.7786 CaCO3 wt %. Furthermore, linear and second-order polynomial regressions, utilizing the intensity ratios of characteristic CaCO3 and PP Raman peaks, were conducted. The most effective quadratic regression curve demonstrated superior independent validation performance with an R 2 of 0.9926 and an RMSEP of 1.6999 CaCO3 wt %. Validation with recycled PP samples confirmed that the quadratic regression was more accurate and reliable to quantify CaCO3 in rPP. The observed quadratic relationship between the CaCO3 and PP Raman peak intensity ratio and the CaCO3 wt % can be attributed to the significant difference in the densities of the two components. The outcomes of this research will help to facilitate the proper recycling of PP materials.

Where the rubber meets the road: Emerging environmental impacts of tire wear particles and their chemical cocktails

About 3 billion new tires are produced each year and about 800 million tires become waste annually. Global dependence upon tires produced from natural rubber and petroleum-based compounds represents a persistent and complex environmental problem with only partial and often-times, ineffective solutions. Tire emissions may be in the form of whole tires, tire particles, and chemical compounds, each of which is transported through various atmospheric, terrestrial, and aquatic routes in the natural and built environments. Production and use of tires generates multiple heavy metals, plastics, PAH's, and other compounds that can be toxic alone or as chemical cocktails. Used tires require storage space, are energy intensive to recycle, and generally have few post-wear uses that are not also potential sources of pollutants (e.g., crumb rubber, pavements, burning). Tire particles emitted during use are a major component of microplastics in urban runoff and a source of unique and highly potent toxic substances. Thus, tires represent a ubiquitous and complex pollutant that requires a comprehensive examination to develop effective management and remediation. We approach the issue of tire pollution holistically by examining the life cycle of tires across production, emissions, recycling, and disposal. In this paper, we synthesize recent research and data about the environmental and human health risks associated with the production, use, and disposal of tires and discuss gaps in our knowledge about fate and transport, as well as the toxicology of tire particles and chemical leachates. We examine potential management and remediation approaches for addressing exposure risks across the life cycle of tires. We consider tires as pollutants across three levels: tires in their whole state, as particulates, and as a mixture of chemical cocktails. Finally, we discuss information gaps in our understanding of tires as a pollutant and outline key questions to improve our knowledge and ability to manage and remediate tire pollution.

Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites

Grape seeds (GS), wine lees (WL), and grape pomace (GP) are common winery by-products, used as bio-fillers in this research with two distinct biopolymer matrices-poly(butylene adipate-co-terephthalate) (PBAT) and polybutylene succinate (PBS)-to create fully bio-based composite materials. Each composite included at least 30 v% bio-filler, with a sample reaching 40 v%, as we sought to determine a composition that could be economically and environmentally effective as a substitute for a pure biopolymer matrix. The compounding process employed a twin-screw extruder followed by an injection molding procedure to fabricate the specimens. An acetylation treatment assessed the specimen's efficacy in enhancing matrix-bio-filler affinity, particularly for WL and GS. The fabricated bio-composites underwent an accurate characterization, revealing no alteration in thermal properties after compounding with bio-fillers. Moreover, hygroscopic measurements indicated increased water-affinity in bio-composites compared to neat biopolymer, most significantly with GP, which exhibited a 7-fold increase. Both tensile and dynamic mechanical tests demonstrated that bio-fillers not only preserved, but significantly enhanced, the stiffness of the neat biopolymer across all samples. In this regard, the most promising results were achieved with the PBAT and acetylated GS sample, showing a 162% relative increase in Young's modulus, and the PBS and WL sample, which exhibited the highest absolute values of Young's modulus and storage modulus, even at high temperatures. These findings underscore the scientific importance of exploring the interaction between bio-fillers derived from winery by-products and three different biopolymer matrices, showcasing their potential for sustainable material development, and advancing polymer science and bio-sourced material processing. From a practical standpoint, the study highlighted the tangible benefits of using by-product bio-fillers, including cost savings, waste reduction, and environmental advantages, thus paving the way for greener and more economically viable material production practices.

Polyester biodegradability: importance and potential for optimisation

To reduce global CO2 emissions in line with EU targets, it is essential that we replace fossil-derived plastics with renewable alternatives. This provides an opportunity to develop novel plastics with improved design features, such as better reusability, recyclability, and environmental biodegradability. Although recycling and reuse of plastics is favoured, this relies heavily on the infrastructure of waste management, which is not consistently advanced on a worldwide scale. Furthermore, today's bulk polyolefin plastics are inherently unsuitable for closed-loop recycling, but the introduction of plastics with enhanced biodegradability could help to combat issues with plastic accumulation, especially for packaging applications. It is also important to recognise that plastics enter the environment through littering, even where the best waste-collection infrastructure is in place. This causes endless environmental accumulation when the plastics are non-(bio)degradable. Biodegradability depends heavily on circumstances; some biodegradable polymers degrade rapidly under tropical conditions in soil, but they may not also degrade at the bottom of the sea. Biodegradable polyesters are theoretically recyclable, and even if mechanical recycling is difficult, they can be broken down to their monomers by hydrolysis for subsequent purification and re-polymerisation. Additionally, both the physical properties and the biodegradability of polyesters are tuneable by varying their building blocks. The relationship between the (chemical) structures/compositions (aromatic, branched, linear, polar/apolar monomers; monomer chain length) and biodegradation/hydrolysis of polyesters is discussed here in the context of the design of biodegradable polyesters.

Depolymerization within a Circular Plastics System

The societal importance of plastics contrasts with the carelessness with which they are disposed. Their superlative properties lead to economic and environmental efficiency, but the linearity of plastics puts the climate, human health, and global ecosystems at risk. Recycling is fundamental to transitioning this linear model into a more sustainable, circular economy. Among recycling technologies, chemical depolymerization offers a route to virgin quality recycled plastics, especially when valorizing complex waste streams poorly served by mechanical methods. However, chemical depolymerization exists in a complex and interlinked system of end-of-life fates, with the complementarity of each approach key to environmental, economic, and societal sustainability. This review explores the recent progress made into the depolymerization of five commercial polymers: poly(ethylene terephthalate), polycarbonates, polyamides, aliphatic polyesters, and polyurethanes. Attention is paid not only to the catalytic technologies used to enhance depolymerization efficiencies but also to the interrelationship with other recycling technologies and to the systemic constraints imposed by a global economy. Novel polymers, designed for chemical depolymerization, are also concisely reviewed in terms of their underlying chemistry and potential for integration with current plastic systems.

Total Capital Investment of plastic recycling plants correlates with energy losses and capacity

Plastic pollution is a generational problem, and stakeholders are turning to chemical recycling as a potential solution. However, decision-makers necessitate quick and reliable capital investment estimations to evaluate innovative technologies, especially in the early project stage, when limited historical data are available. To address this need, we built a database of 160+ chemical recycling plants, querying for nominal capacity, year and place of construction, total capital investment (TCI), number of long-term jobs and opportunity of subsidies. Then, we compared conventional association of the advancement of cost engineering AACE class 5 estimation methods, with literature estimates, and commercial capital expenditure confidence intervals for pyrolysis, gasification, solvolysis, and selective dissolution. We demonstrate the unreliability of classic methods, and we propose ballpark correlations based on the plant capacity, or the energy loss. Chemical recycling plants suffer from poor economy of scale (with current technologies), and capacity is not always the best indicator for TCI estimation. Pyrolysis and gasification are energy-driven technologies, and their TCI correlates very well (R2 =0.91-0.92) with the total energy losses. Solvolysis and selective dissolution, instead, are at an earlier development stage, so cost engineers or researchers will have to accept less certain TCI vs capacity (R2 =0.60).

An Aspen plus process simulation model for exploring the feasibility and profitability of pyrolysis process for plastic waste management

Plastics, integral to various human activities, have led to a surge in production, posing substantial challenges in waste management. The persistent non-biodegradability of plastics, taking over a century to decompose, necessitates exploration into technologies for their conversion into sustainable fuels. Pyrolysis, an oxygen-free thermal decomposition process, emerges as a promising avenue for producing liquid fuels from plastic waste. This study's primary objective is to create and validate an Aspen Plus simulation model, enabling techno-economic evaluation and sensitivity analysis of pyrolysis for converting waste plastics into liquid fuels. Critical parameters-temperature, retention time, and particle size-are examined for their impact on product yield and quality. The methodology involves model development, validation, and subsequent simulations with various waste plastic types under different pyrolysis conditions. Experimental investigation using waste high-density polyethylene (HDPE) in an auger reactor yielded an oil yield of 61.29%, char yield of 10.98%, and syngas yield of 27.73% at 525 °C. Post-validation against this data, the model explored four plastic types, revealing significant influences of plastic type and reactor temperature on product yields. Polystyrene (PS) at 500 °C produced the highest oil content at 83.69%, with temperature affecting yield before secondary cracking. Techno-economic evaluation for a pyrolysis plant processing 10,000 tons of waste HDPE annually indicated a minimum selling price (MSP) of $302.50/ton, a net present value (NPV) of $12,594,659.7, and a 1.03-year payback period. This study provides crucial insights for designing an economically viable and sustainable pyrolysis process, guiding further research and industrial implementation.

Household mixed plastic waste derived adsorbents for CO2 capture: A feasibility study

The feasibility of producing activated carbon (AC) from real Household Mixed Plastic Waste (HMPW) comprising of LDPE, HDPE, PP, PS, and PET for carbon capture via direct carbonisation followed by microwave-assisted or conventional thermally assisted chemical activation was investigated. A microwave-assisted activation procedure was adopted to assess the impact on the CO2 capture capacity of the resulting AC using both a lower temperature (400 °C vs. 700 °C) and a shorter duration (5 vs. 120 mins) than that required for conventional activation. The results obtained showed that the AC yield was 71 and 78% for the conventional and microwave-assisted samples, respectively. Microwave activation consumed five-fold less energy (0.19 kWh) than the conventional activation (0.98 kWh). Thermal stability results indicated total weight loss of 10.0 and 8.3 wt%, respectively, for conventional and microwave-activated samples over the temperature range of 25-1000 °C, with ACs from both activation routes displaying a type 1 nitrogen isotherm. The dynamic CO2 uptake capacity at 1 bar and 25 °C was 1.53 mmol/g, with maximum equilibrium uptake ranging between 1.32 and 2.39 mmol/g at temperatures (0-50 °C) and 1 bar for the conventionally activated AC. The analogous microwave-activated sample showed a higher dynamic CO2 uptake of 1.62 mmol/g and equilibrium uptake in the range 1.58-2.88 mmol/g under equivalent conditions. The results therefore indicate that microwave activation results in enhanced carbon capture potential. To the best of our knowledge, this is the first-time microwave heating has been employed to convert household mixed plastic wastes directly into ACs for carbon capture applications. This report therefore demonstrates that the management of mixed plastics could lead to the development of a circular economy through the conversion of waste into value-added materials.

Municipal solid waste management instruments that influence the use of the refuse as fuel in developing countries: A critical review

Landfills are the destination of most of the refuse generated whereas composting, material recycling, and Waste-to-Energy (WtE) technologies are not commonly employed in developing countries. However, the destination for energy purposes could be supplied with this refuse, improving the viability of energy use. Thus, this article raises some questions to identify aspects that could encourage its use as refuse-derived fuel (RDF) in these countries. Among them, does environmental education affect the municipal solid waste (MSW) source separation with emphasis on a destination? Can selective collection and extended producer responsibility (EPR) affect the MSW for energy recovery? Is there competition between the recycling market and the energy market for RDF? A systematic review of the literature was conducted to gather data and provide answers to such questions. This enabled to observe that EPR, selective collect expansion and source separation influence the quantity and quality of waste sent for energy use. Both internal and external factors impact on source separation. Additionally, there is evidence to support that despite several studies showing their technical, economic, environmental and social viability, the methods of energy usage of the refuse still need to improve their deployment in developing countries. In addition to identifying the main research gaps to be filled in future studies, the article also identified the instruments of MSW management that are to be applied in developing countries to divert recyclable and organic waste from landfill.

Exploring genetic landscape of low-density polyethylene degradation for sustainable troubleshooting of plastic pollution at landfills

Plastic pollution increases globally due to the high volume of its production and inadequate mismanagement, leading to dumps in landfills affecting terrestrial and aquatic ecosystems. Landfills, as sink for plastics, leach various toxic chemicals and microplastics into the environment. We scrutinized the genetic expression for low-density polyethylene (LDPE) degradation via microorganisms to investigate cell viability and metabolic activities for biodegradation and genetic profiling. Samples were collected from the Pirana waste landfill at Ahmedabad, Gujarat, which is one of the largest and oldest municipal solid waste (MSW) dump sites in Asia. Results analyzed that isolated bacterial culture PN(A)1 (Bacillus cereus) is metabolically active on LDPE as carbon source during starvation conditions when incubated for up to 60 days, which was confirmed via 2,3,5-triphenyl-tetrazolium chloride (TTC) reduction test, reported cell viability and LDPE degradation. Abrasions, surface erosions, and cavity formations were analyzed via scanning electron microscopy (SEM), whereas the breakdown of high molecular polymers converted to low molecules, i.e., depolymerization, was also observed via Fourier-transform infrared (FTIR) spectroscopy over 90 days, along with changes in functional groups of carboxylic acids and aldehyde as well as the formation of polysulfide, aliphatic compounds, aromatic ethers, alcohols, and ether linkages. Further, transcriptomic analysis was performed via DESeq2 analysis to understand key gene expression patterns and pathways involved in LDPE degradation. During the initial phase of LDPE degradation, genes related to biological processes, like membrane transportation, ABC transporters, carbon and lipid metabolism, fatty acid degradation/oxidation, and TCA cycle, are likely to indicate pathways for stress response and molecular functions, like oxidoreductase, catalytic, lyase, transferase, and hydrolase activities were expressed. Interlinking between metabolic pathways indicates biodegradation process that mineralizes LDPE during subsequent incubation days. These pathways can be targeted for increasing the efficiency of LDPE degradation using microbes in future studies. Thus, considering microbial-mediated biodegradation as practical, eco-friendly, and low-cost alternatives, healthy biomes can degrade polymers in natural environments explored by understanding the genetic and enzymatic expression, connecting their role in the process to the likely metabolic pathways involved, thereby increasing the rate of their biodegradation.

Uncovering environmental performance patterns of plastic packaging waste in high recovery rate countries: An example of EU-27

Plastic consumption and its end-of-life management pose a significant environmental footprint and are energy intensive. Waste-to-resources and prevention strategies have been promoted widely in Europe as countermeasures; however, their effectiveness remains uncertain. This study aims to uncover the environmental footprint patterns of the plastics value chain in the European Union Member States (EU-27) through exploratory data analysis with dimension reduction and grouping. Nine variables are assessed, ranging from socioeconomic and demographic to environmental impacts. Three clusters are formed according to the similarity of a range of characteristics (nine), with environmental impacts being identified as the primary influencing variable in determining the clusters. Most countries belong to Cluster 0, consisting of 17 countries in 2014 and 18 countries in 2019. They represent clusters with a relatively low global warming potential (GWP), with an average value of 2.64 t CO2eq/cap in 2014 and 4.01 t CO2eq/cap in 2019. Among all the assessed countries, Denmark showed a significant change when assessed within the traits of EU-27, categorised from Cluster 1 (high GWP) in 2014 to Cluster 0 (low GWP) in 2019. The analysis of plastic packaging waste statistics in 2019 (data released in 2022) shows that, despite an increase in the recovery rate within the EU-27, the GWP has not reduced, suggesting a rebound effect. The GWP tends to increase in correlation with the higher plastic waste amount. In contrast, other environmental impacts, like eutrophication, abiotic and acidification potential, are identified to be mitigated effectively via recovery, suppressing the adverse effects of an increase in plastic waste generation. The five-year interval data analysis identified distinct clusters within a set of patterns, categorising them based on their similarities. The categorisation and managerial insights serve as a foundation for devising a focused mitigation strategy.

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Bioplastics such as polyhydroxyalkanoates (PHA) emerge as an interesting alternative to conventional fossil fuel-based plastics and as part of the solution their associated environmental issues. Nevertheless, end-of-life scenarios are still a major concern, especially within a circular economy framework. When feasible, mechanical recycling appears as the best alternative, since it saves raw materials and energy. However, the viability of mechanical recycling can be compromised by the degradation of the plastic during its use and during the recycling process and by the presence of certain additives. Consequently, the main objective of this work is to study the effect of accelerated ageing and mechanical recycling on the structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based formulations. The obtained results suggest that accelerated ageing and mechanical recycling led only to a slight degradation of the pure PHBV material, along with small variations in the thermal and mechanical properties. However, the plasticized PHBV formulations showed a more severe degradation and increased thermal stability and stiffness, which could be result of the elimination of the plasticizer during the recycling. Overall, mechanical recycling seems to be an interesting valorization strategy for PHBV wastes, although especial attention should be paid to the additives present in the materials.

Review: Mitigation measures to reduce tire and road wear particles

The generation of tire wear is an inevitable outcome of the friction between the road and the tire which is necessary for the safe operation of vehicles on roadways. Tire wear particles form agglomerates with road surface material. These agglomerates are called tire and road wear particles (TRWP). Due to their persistence in the environmental compartments and their potentially harmful effects, research on preventative and end-of-pipe mitigation strategies for TRWP is essential. The major goal of this study is to summarize and assess the state of the art in science and technology of mitigation measures for TRWP as the basis for further research activities. Approximately 500 literature sources were found and analyzed in terms of the efficiency, maturity, implementation, and impact of the mitigation measures. Generally, technological and management mitigation measures to reduce the generation of TRWP are beneficial since they prevent TRWP from entering the environment. Once released into environmental compartments, their mobility and dispersion would increase, making removing the particles more challenging. Technological and management mitigation measures after the release of TRWP into the environment are mainly well established in industrialized countries. Street cleaning and wastewater technologies show good removal efficiencies for TRWP and microplastics. In any case, no individual measure can solely solve the TRWP issue, but a set of combined measures could potentially be more effective. The absence of fully-developed and standardized methods for tire abrasion testing and measuring TRWP in the environment makes it impossible to reliably compare the tire abrasion behavior of different tire types, determine thresholds, and control mitigation actions. Field tests and pilot studies are highly needed to demonstrate the effectiveness of the abatement measures under real conditions.

Impact of treatment chemicals on the morphology and molecular structure of microfibers and microplastic films in wastewater

This study investigated the impact of commonly used treatment chemicals on the morphology and molecular structure of microfibers (MFs) and microplastic films (MPFs) to determine whether significant changes could occur during wastewater treatment. MFs and MPFs were exposed to sodium hypochlorite (NaOCl), hydrogen peroxide (H2O2), calcium hydroxide (Ca(OH)2, pH 11), sodium hydroxide (NaOH, pH11), and hydrochloric acid (HCl, pH 3) at typical doses and exposure times used at wastewater treatment plants. Scanning electron microscopy (SEM) analysis and attenuated total reflectance-Fourier-transform infrared (ATR-FTIR) were used to examine any morphological or chemical changes after the treatment. Morphological changes were observed in the form of cracks, and increased roughness was revealed in the SEM and 3-D surface images. The results showed that MFs were more resistant to surface degradation than MPFs. Moreover, intensity peaks of ATR-FTIR revealed some partial dislodgement of the bonds in both MFs and MPFs after chemical treatment, but the overall polymer structure remained intact. The changes that occur on the surface of MFs and MPFs during chemical treatment can impact their fate, removal, and transportation behavior both at the treatment plant and after discharge to the environment.

Dual-Mechanism Tuned Engineered Polyphenols with Cascade Photocatalytic Self-Fenton Reaction for Sustainable Biocidal Coatings

Traditional disposable personal protective equipment (PPE) only blocks pathogenic bacteria by mechanical filtration, with the risk of recontamination and transmission remaining. Herein, inspired by phenolic-enabled nanotechnology (PEN), we proposed engineered polyphenol coatings by plant-derived aromatic aldehydes and metal involvement, denoted as FQM, to obtain the desired photocatalysis-self-Fenton antibacterial performance. Experiments and theoretical analysis proved the dual mechanism of Fe-induced enhancement: (1) tuning of molecular structure realized improved optical properties; (2) Fe(III)/Fe(II) triggered photocatalytic cascade self-Fenton reaction. Mechanism study reveals FQM killing bacteria by direct-contact ROS attack and gene regulation. Further, the FQM was developed as the ideal antibacterial coating on different fabrics (cloth cotton, polyester, and N95 mask), killing more than 93% of bacteria after 5 cycles of use. Such photocatalysis-self-Fenton coatings based on engineered polyphenols endowed with desirable safety, sustainability, and efficient antibacterial features are promising solutions to meet the challenges of the currently available PPE.

Cleaning Up without Messing Up: Maximizing the Benefits of Plastic Clean-Up Technologies through New Regulatory Approaches

As the global plastics crisis grows, numerous technologies have been invented and implemented to recover plastic pollution from the environment. Although laudable, unregulated clean-up technologies may be inefficient and have unintended negative consequences on ecosystems, for example, through bycatch or removal of organic matter important for ecosystem functions. Despite these concerns, plastic clean-up technologies can play an important role in reducing litter in the environment. As the United Nations Environment Assembly is moving toward an international, legally binding treaty to address plastic pollution by 2024, the implementation of plastic clean-up technologies should be regulated to secure their net benefits and avoid unintended damages. Regulation can require environmental impact assessments and life cycle analysis to be conducted predeployment on a case-by-case basis to determine their effectiveness and impact and secure environmentally sound management. During operations catch-efficiency and bycatch of nonlitter items, as well as waste management of recovered litter, should be documented. Data collection for monitoring, research, and outreach to mitigate plastic pollution is recommended as added value of implementation of clean-up technologies.

Understanding residents' behaviour intention of recycling plastic waste in a densely populated megacity of emerging economy

Plastic waste is choking our planet, but the recycling rate is still universally low. Understanding factors affecting recycling behaviours can help address this pressing issue. Taking Dhaka as an example, this study explores the determinants of the intentions to recycle plastic waste. We employed the Theory of Planned Behaviour (TPB) and extended it with two additional variables: Moral Norms, and Perceived sufficiency of knowledge and policy support. Survey data of 577 were collected and analysed using PLS-SEM. The findings suggest attitude, perceived behavioural control, moral norms and subjective norms significantly impact recycling intention, among which moral norms (β = 0.148, p < 0.05) acts even more strongly than subjective norms (β = 0.12, p < 0.05). Moreover, low level perception of knowledge and policy support makes people perceive less control over recycling behaviour (β = 0.188, p < 0.05), but actually reinforce their recycling intention (β = -0.091, p < 0.1). This study enriches the theoretical discussion of TPB, and contributes to the efforts of encouraging plastic recycling in populated megacity of emerging economy.

Recent progress of bioplastics in their properties, standards, certifications and regulations: A review

The environmental impact associated with fossil fuel-based polymers has paved the way to explore biopolymer-based plastics, their properties, and their applications. Bioplastics are polymeric materials that are greatly interesting due to their eco-friendlier and non-toxic nature. In recent years, exploring the different sources of bioplastics and their applications has become one of the active research areas. Biopolymer-based plastics have applications in food packaging, pharmaceuticals, electronics, agricultural, automotive and cosmetic sectors. Bioplastics are considered safe, but there are several economic and legal challenges to implementing them. Hence, this review aims to i) outline the terminology associated with bioplastics, its global market, major sources, types and properties of bioplastics, ii) discuss the major bioplastic waste management and recovery options, iii) provide the major standards and certifications regarding bioplastics, iv) explore the various country-wise regulations and restrictions associated with bioplastics, and v) enumerate the various challenges and limitations associated with bioplastics and future directions. Therefore, providing adequate knowledge about various bioplastics, their properties and regulatory aspects can be of great importance in the industrialization, commercialization and globalization of bioplastics to replace petroleum-based products.

High-Throughput Characterization and Optimization of Polyamide Hydrolase Activity Using Open Port Sampling Interface Mass Spectrometry

Enzymatic biodegradation of polymers, such as polyamides (PA), has the potential to cost-effectively reduce plastic waste, but enhancements in degradation efficiency are needed. Engineering enzymes through directed evolution is one pathway toward identification of critical domains needed for improving activity. However, screening such enzymatic libraries (100s-to-1000s of samples) is time-consuming. Here we demonstrate the use of robotic autosampler (PAL) and immediate drop on demand technology (I.DOT) liquid handling systems coupled with open-port sampling interface-mass spectrometry (OPSI-MS) to screen for PA6 and PA66 hydrolysis by 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC) in a high-throughput (8-20 s/sample) manner. The OPSI-MS technique required minimal sample preparation and was amenable to 96-well plate formats for automated processing. Enzymatic hydrolysis of PA characteristically produced soluble linear oligomer products that could be identified by OPSI-MS. Incubation temperatures and times were optimized for PA6 (65 °C, 24 h) and PA66 (75 °C, 24 h) over 108 experiments. In addition, the I.DOT/OPSI-MS quantified production of PA6 linear dimer (8.3 ± 1.6 μg/mL) and PA66 linear monomer (13.5 ± 1.5 μg/mL) by NylC with a lower limit of detection of 0.029 and 0.032 μg/mL, respectively. For PA6 and PA66, linear oligomer production corresponded to 0.096 ± 0.018% and 0.204 ± 0.028% conversion of dry pellet mass, respectively. The developed methodology is expected to be utilized to assess enzymatic hydrolysis of engineered enzyme libraries, comprising hundreds to thousands of individual samples.

The escalated potential of the novel isolate Bacillus cereus NJD1 for effective biodegradation of LDPE films without pre-treatment

This study focused on the biodegradation of LDPE films using a novel isolate of Bacillus obtained from soil samples collected from a 20-year-old plastic waste dump. The aim was to evaluate the biodegradability of LDPE films treated with this bacterial isolate. The results indicated a 43% weight loss of LDPE films within 120 days of treatment. The biodegradability of LDPE films was confirmed through various testing methods, including BATH, FDA, CO₂ evolution tests, and changes in total cell growth count, protein content, viability, p^H of the medium, and release of microplastics. The bacterial enzymes, including laccases, lipases, and proteases, were also identified. SEM analysis revealed biofilm formation and surface changes in treated LDPE films, while EDAX analysis showed a reduction in carbon elements. AFM analysis demonstrated differences in roughness compared to the control. Furthermore, wettability increased and tensile strength decreased, confirming the biodegradation of the isolate. FTIR spectral analysis showed changes in skeletal vibrations, such as stretches and bends, in the linear structure of polyethylene. FTIR imaging and GC-MS analysis also confirmed the biodegradation of LDPE films by the novel isolate identified as Bacillus cereus strain NJD1. The study highlights the potentiality of the bacterial isolate for safe and effective microbial remediation of LDPE films.

The challenge of reducing macroplastic pollution: Testing the effectiveness of a river boom under real environmental conditions

Improving collection technologies is crucial to develop effective and economically feasible solutions for catching plastic from riverine environments. However, floating booms are being constructed and deployed in river around the world without rigorously testing its effectiveness. In this study, we tested the effectiveness of a boom under realistic conditions for several configurations and treatments (including "C-shape" and "Slash-shape" configurations). For this, we used the same macroplastics that leak out of waste management channels in order to be as realistic as possible. In total we used 52 plastic articles of 13 different polymers. The global effectiveness of the tested C-shape boom was lower than expected under such conditions (around 37 % of retention). The effectiveness of the Slash-shape boom was considerably worst (<10 %). However, the effectiveness varies greatly according to the particular characteristics of the plastic articles (i.e., shape and polymer composition), ranged from 0 to 100 %. For example, the boom could be 100 % effective retaining plastics such as Stylofoam trays and cups, 40-20 % for food-wrappers but 0 % for disposable plates and spoons, straws, monofilament fishing lines, packaging straps, hoses, pipes, elastic bands, etc. It seems that to have a reasonable catch-effectiveness and be cost-efficient, boom designs need to be improved and tested under different environmental conditions before to reach the market. In addition, it is unrealistic to select only high buoyancy plastics for testing them.

Production of polyhydroxyalkanoates from renewable resources: a review on prospects, challenges and applications

Bioplastics replace synthetic plastics of petrochemical origin, which contributes challenge to both polymer quality and economics. Novel polyhydroxyalkanoates (PHA)-composite materials, with desirable product quality, could be developed, thus targeting the global plastics market, in the coming years. It is possible that PHA can be a greener substitute for their petroleum-based competitors since they are simply decomposed, which may lessen the pressure on municipal and industrial waste management systems. PHA production has proven to be the bottleneck in industrial application and commercialization because of the high price of carbon substrates and downstream processes required to achieve reliability. Bacterial PHA production by these municipal and industrial wastes, which act as a cheap, renewable carbon substrate, eliminates waste management hassles and acts as an efficient substitute for synthetic plastics. In the present review, challenges and opportunities related to the commercialization of polyhydroxyalkanoates are discussed and presented. Moreover, it discusses critical steps of their production process, feedstock evaluation, optimization strategies, and downstream processes. This information may provide us the complete utilization of bacterial PHA during possible applications in packaging, nutrition, medicine, and pharmaceuticals.

Regional Regression Correlation Model of Microplastic Water Pollution Control Using Circular Economy Tools

Water pollution caused by microplastics represents an important challenge for the environment and people's health. The weak international regulations and standards in this domain support increased water pollution with microplastics. The literature is unsuccessful in establishing a common approach regarding this subject. The main objective of this research is to develop a new approach to necessary policies and ways of action to decrease water pollution caused by microplastics. In this context, we quantified the impact of European water pollution caused by microplastics in the circular economy. The main research methods used in the paper are meta-analysis, statistical analysis and an econometric approach. A new econometric model is developed in order to assist the decision makers in increasing efficiency of public policies regarding water pollution elimination. The main result of this study relies on combining, in an integrated way, the Organisation for Economic Co-operation and Development's (OECD) data on microplastic water pollution and identifying relevant policies to combat this type of pollution.

Microplastics in urban catchments: Review of sources, pathways, and entry into stormwater

Urban areas play a key role in the production of microplastics (MPs) and their entry into water bodies. This article reviews the literature on the sources, transport, and control of MPs in urban environments with the aim of clarifying the mechanisms underlying these processes. Major MP sources include atmospheric deposition, micro-litter, and tire and road wear particles (TRWPs). MPs deposited from the atmosphere are mostly fibers and may be particularly important in catchments without traffic. Littering and attrition of textiles and plastic products is another important MP source. However, the quantities of MPs originating from this source may be hard to estimate. TRWPs are a significant source of MPs in urban areas and are arguably the best quantified source. The mobilization of MPs in urban catchments is poorly understood but it appears that dry unconsolidated sediments and MP deposits are most readily mobilized. Sequestration of MPs occurs in green areas and is poorly understood. Consequently, some authors consider green/pervious parts of urban catchments to be MP sinks. Field studies have shown that appreciable MP removal occurs in stormwater quality control facilities. Street cleaning and snow removal also remove MPs (particularly TRWPs), but the efficacy of these measures is unknown. Among stormwater management facilities, biofiltration/retention units seem to remove MPs more effectively than facilities relying on stormwater settling. However, knowledge of MP removal in stormwater facilities remains incomplete. Finally, although 13 research papers reported MP concentrations in stormwater, the total number of field samples examined in these studies was only 189. Moreover, the results of these studies are not necessarily comparable because they are based on relatively small numbers of samples and differ widely in terms of their objectives, sites, analytical methods, size fractions, examined polymers, and even terminology. This area of research can thus be considered "data-poor" and offers great opportunities for further research in many areas.

Oxidative Damage in Roots of Rice (Oryza sativa L.) Seedlings Exposed to Microplastics or Combined with Cadmium

This study aimed to investigate the effect of 10-40 mg L^-1 polystyrene microplastics (PS-MPs), 0.05 mg L^-1 cadmium (Cd) and their combination on the growth and related physiological and toxicological responses in Oryza sativa L. seedling roots. Results showed that the fresh weight, dry weight and root lengths of treatments by PS-MPs, Cd single and combinative were all lower than the control, and opposite phenomenon appeared in production of superoxide radical (O₂^-.), malondialdehyde (MDA) and carbonylated protein. Superoxide dismutase (SOD) and guaiacol peroxidase (POD) activities induced by 10-40 mg L^-1 PS-MPs and combination with Cd were almost higher than those by Cd alone, expression of heat shock protein (HSP)70 and carbonylated protein slightly decreased. In compound exposure, 10-20 mg L^-1 PS-MPs alleviated Cd damage and promoted root growth by increasing SOD and POD activities, but 40 mg L^-1 PS-MPs accelerated the accumulation of Cd, MDA, and O₂^-., which was responsible for decreasing root biomass and the aggravating necrosis of root tip cells.

Potential human health risk assessment of microplastic exposure: current scenario and future perspectives

The vast usage of synthetic plastics has led to the global problem of plastic pollution which in turn has positively impacted the concerns regarding microplastic pollution. The major factor responsible for the increased level of pollution is the smaller size of microplastics which helps in its transportation across the globe. It has been found in most remote areas like glaciers and Antarctic regions where it is difficult for other contaminants to reach. This is ensured by the physicochemical cycle of plastic. They can either be produced for different applications or generated through the fragmentation of large plastic particles. Different studies have shown the accumulation of microplastics in different organisms, especially in aquatic animals leading to their entry into the food chain. The ultimate fate of the microplastics is accumulation inside the human body posing the risk of different health conditions like cancer, diabetes, and allergic reactions. The present review summarizes a detailed discussion on the current status of microplastic pollution, their effect on different organisms, and its impact on human health with a case study on the human health risk assessment for analyzing the global rate of microplastic ingestion.

Emerging electrochemical techniques for identifying and removing micro/nanoplastics in urban waters

The ubiquitous micro/nanoplastics (MPs/NPs) in urban waters are priority pollutants due to their toxic effects on living organisms. Currently, great efforts have been made to realize a plastic-free urban water system, and the identification and removal of MPs/NPs are two primary issues. Among diverse methods, emerging electrochemical techniques have gained growing interests owing to their facile implementation, high efficiency, eco-compatibility, onsite operation, etc. Herein, recent progress in the electrochemical identification and removal of MPs/NPs in urban waters are comprehensively reviewed. The electrochemical sensing of MPs/NPs and their released pollutants (e.g., bisphenol A (BPA)) has been analyzed, and the sensing principles and the featured electrochemical devices/electrodes are examined. Afterwards, recent applications of electrochemical methods (i.e., electrocoagulation, electroadsorption, electrokinetic separation and electrochemical degradation) in MPs/NPs removal are discussed in detail. The influences of critical parameters (e.g., plastics' property, current density and electrolyte) in the electrochemical identification and removal of MPs/NPs are also analyzed. Finally, the current challenges and prospects in electrochemical sensing and removal of MPs/NPs in urban waters are elaborated. This review would advance efficient electrochemical technologies for future MPs/NPs pollutions management in urban waters.

Removal of microplastics and nanoplastics from urban waters: Separation and degradation

The omnipresent micro/nanoplastics (MPs/NPs) in urban waters arouse great public concern. To build a MP/NP-free urban water system, enormous efforts have been made to meet this goal via separating and degrading MPs/NPs in urban waters. Herein, we comprehensively review the recent developments in the separation and degradation of MPs/NPs in urban waters. Efficient MP/NP separation techniques, such as adsorption, coagulation/flocculation, flotation, filtration, and magnetic separation are first summarized. The influence of functional materials/reagents, properties of MPs/NPs, and aquatic chemistry on the separation efficiency is analyzed. Then, MP/NP degradation methods, including electrochemical degradation, advanced oxidation processes (AOPs), photodegradation, photocatalytic degradation, and biological degradation are detailed. Also, the effects of critical functional materials/organisms and operational parameters on degradation performance are discussed. At last, the current challenges and prospects in the separation, degradation, and further upcycling of MPs/NPs in urban waters are outlined. This review will potentially guide the development of next-generation technologies for MP/NP pollution control in urban waters.