Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

Enhanced treatment of multiphase extraction wastewater from contaminated sites with Cu-Ce modified GAC three-dimensional electrodes

A three-dimensional (3D) electrode system is widely recognized as an effective technology for enhancing electrocatalytic effect. In this study, Cu-Ce modified granular activated carbon (GAC) particle electrodes were prepared using the impregnation method and applied to handle multiphase extraction wastewater. Structural and electrochemical characterization revealed that while the specific surface area of Cu-Ce/GAC decreased by 13.94%, the active area was 2.6 times greater than that of GAC. In addition, the influences of distinct impregnation concentrations, calcination temperatures, and calcination times on the performance of Cu-Ce/GAC electrodes were investigated. The results suggested the optimal preparation conditions of 15 mmol/L, 500 °C and 2 h. Under these conditions, the Cu-Ce/GAC electrode achieved a 92.39% removal of chemical oxygen demand (COD) from a multi-extract of groundwater, with an energy consumption of 13.44 kWh/(kg∙COD). The degradation efficiency improved by 62% compared to the conventional 2D system, while energy consumption decreased by 60%. The main organic pollutants in the multiple extracts, including benzene, toluene, dichloromethane, trichloromethane, were removed at rates exceeding 90% after 60 min treatment. This study yields a methodological and engineering approach for treating multiple extracts wastewater from contaminated groundwater.

An overview of the recent advances and future prospects of three-dimensional particle electrode systems for treating wastewater

Three-dimensional (3D) electrochemical technology is considered a very effective industrial wastewater treatment method for its high treatment efficiency, high current efficiency, low energy consumption, and, especially, ability to completely mineralize nonbiodegradable organic contaminants. Particle electrodes, which are the fundamental components of 3D electrochemical technology, have multiple functions in the electrochemical reaction process. Various types of particle electrodes have been created and applied for wastewater treatment. Herein, we present a thorough analysis of the research and development of particle electrodes used for electrocatalyzing pollutants. Initially, reactor designs, factors affecting the removal efficiency of pollutants and degradation mechanisms are introduced. In particular, a detailed investigation is conducted into the selection of particle electrode materials and the roles they play in the 3D electrochemical treatment of wastewater. Subsequently, the degradation efficiency and energy consumption associated with 3D electrochemical technology for different pollutants are investigated. Finally, the directions and outlook for further studies on particle electrodes are discussed. We believe that this review will offer a useful perspective on the development and application of particle electrodes for wastewater purification.

Advances in three-dimensional electrochemical degradation: A comprehensive review on pharmaceutical pollutants removal from aqueous solution

Water pollution, stemming from various contaminants including organic and pharmaceutical pollutants, poses a significant global challenge. Amidst the array of methods available for pollutant mitigation, the three-dimensional electrochemical approach emerges as a standout solution due to its environmental compatibility, cost-effectiveness, and rapid efficiency. This study delves into the efficacy of three-dimensional electrochemical processes in purging organic and pharmaceutical pollutants from aqueous media. Existing research indicates that the three-dimensional electrochemical process, particularly when employing particle electrodes, exhibits notable success in degrading organic and pharmaceutical pollutants. This achievement is largely attributed to the ample specific surface area of particle electrodes and the shortened mass transfer distance, which collectively enhance efficiency in comparison to traditional two-dimensional electrochemical methods. Moreover, this approach is lauded for its environmental friendliness and cost-effectiveness. However, it is imperative to note that the efficacy of the process is subject to various factors including temperature, pH levels, and current intensity. While the addition of oxidants can augment process efficiency, it also carries the risk of generating intermediate compounds that impede the reaction. In conclusion, the three-dimensional electrochemical method proves to be a viable and practical approach, provided that process conditions are meticulously considered and adhered to. Offering advantages from both environmental and economic perspectives, this method presents a promising alternative to conventional water and wastewater treatment techniques.

A new attempt to remove toluene using nickel-iron bimetallic particle electrode reactor

A new attempt of removing toluene waste gas using a three-dimensional electrode reaction device with nickel-iron bimetallic particle electrode is presented in this paper. The particle electrode was prepared by a simple liquid phase reduction method. Through bimetal modification, the particle electrode mass transfer rate is increased to 1.29 times, and the degradation efficiency of the reactor is increased by nearly 40%, which makes it possible to remove toluene waste gas by other electrochemical methods in addition to plasma method. The removal efficiency of the particle electrode can be stabilized at more than 80% after 5 cycles (50 h). At the same time, the relationship between independent working parameters and dependent variables is analyzed using the central composite design, and the operating parameters are optimized. Based on this study, the removal mechanism and possible degradation pathway of toluene were investigated. This study provides a supplement to the possibility and theoretical basis of new technology application for electrocatalytic oxidation removal of VOCs.

Preparation of Ti3C2Tx modified rare earth doped PbO2 electrodes for efficient removal of sulfamethoxazole

In this study, we deposited Ti3C2Tx-modified, rare-earth-doped PbO2 on the surface of a carbon fabric via electrodeposition. The surface morphology and electronic structure of the electrode were characterized with SEM, XRD and XPS. The layered Ti3C2Tx did not change the structure of β-PbO2, and at the same time, it improved the crystallinity of the material and reduced the grains of PbO2. Electrochemical experiments showed that the addition of Ti3C2Tx increased the electrochemical activity of the electrode and produced more H2O2, which contributed to the degradation of pollutants. The efficiency of sulfamethoxazole (SMX) degradation reached 95% after 120 min at pH 3 with a current density of 50 mA/cm2. Moreover, the electrode has good cycling performance, and the degradation efficiency was still 80% after 120 min after 10 cycles of recycling. Based on the intermediates identified by HPLC‒MS, a mechanism for SMX degradation was proposed. Our results will provide a new idea for the development of efficient electrocatalytic degradation of antibiotics.

Recent progress of particle electrode materials in three-dimensional electrode reactor: synthesis strategy and electrocatalytic applications

With the complete promotion of a green, low-carbon, safe, and efficient economic system as well as energy system, the promotion of clean governance technology in the field of environmental governance becomes increasingly vital. Because of its low energy consumption, great efficiency, and lack of secondary pollutants, three-dimensional (3D) electrode technology is acknowledged as an environmentally beneficial and sustainable way to managing clean surroundings. The particle electrode is an essential feature of the 3D electrode reactor. This study provides an in-depth examination of the most current advancements in 3D electrode technology. The significance of 3D electrode technology is emphasized, with an emphasis on its use in a variety of sectors. Furthermore, the particle electrode synthesis approach and mechanism are summarized, providing vital insights into the actual implementation of this technology. Furthermore, by a metrological examination of the research literature in this sector, the paper expounds on the potential and obstacles in the development and popularization of future technology.

A review on three-dimensional electrochemical technology for the antibiotic wastewater treatment

The potential genotoxicity and non-biodegradability of antibiotics in the natural water bodies threaten the survival of various living things and cause serious environmental pollution and destruction. Three-dimensional (3D) electrochemical technology is considered a powerful means for antibiotic wastewater treatment as it can degrade non-biodegradable organic substances into non-toxic or harmless substances and even completely mineralize them under the action of electric current. Therefore, antibiotic wastewater treatment using 3D electrochemical technology has now become a hot research topic. Thus, in this review, a detailed and comprehensive investigation was conducted on the antibiotic wastewater treatment using 3D electrochemical technology, including the structure of the reactor, electrode materials, the influence of operating parameters, reaction mechanism, and combination with other technologies. Many studies have shown that the materials of electrode, especially particle electrode, have a great effect on the antibiotic wastewater treatment efficiency. The influence of operating parameters such as cell voltage, solution pH, and electrolyte concentration was very significant. Combination with other technologies such as membrane and biological technologies has effectively increased antibiotic removal and mineralization efficiency. In conclusion, the 3D electrochemical technology is considered as a promising technology for the antibiotic wastewater treatment. Finally, the possible research directions of the 3D electrochemical technology for antibiotic wastewater treatment were proposed.