Adsorption of 2,4-dichlorophenoxyacetic acid by UiO-66-NH2 obtained in a green way

Synthesis of a novel cost-effective double-ligand Zr-based MOF via an inverted modulator strategy towards enhanced adsorption and photodegradation of tetracycline

Developing visible-light response photocatalysts with high activity and adsorption alongside sustainability is vitally important to environmental restoration. Here, we fabricated a novel metal organic framework (MOF) with cost-effective double-ligands (fumaric acid and 2-aminoterephthalic acid as ligand precursors, denoted as MA-MOF) via a facile solvothermal method. Specifically, crystalline [Zr6O4(OH)4(fumarate)6] (MOF-801) can be only formed with monocarboxylic acids as modulators. Therefore, in the construction of crystalline double-ligand MA-MOF, the absence of monocarboxylic acid modulators successfully prevents the formation of crystalline MOF-801. Instead, the crystalline double-ligand MA-MOF is formed. Properties of MA-MOFs including the surface area, porosity, charge transfer resistance, and energy level position can be adjusted via altering the ratio of ligands. The optimal sample, MA-MOF2 (prepared with a molar ratio of fumaric acid and 2-aminoterephthalic acid being 2:1), shows a total 94.6% removal of tetracycline via adsorption and photodegradation, far exceeding the corresponding single-ligand counterparts. This work proposes an innovative inverted modulator strategy for constructing double-ligand MOFs.

Biomimetic delivery of emodin via macrophage membrane-coated UiO-66-NH2 nanoparticles for acute pancreatitis treatment

Acute pancreatitis (AP) is a severe inflammatory condition with a rising incidence and high mortality rates, especially in severe cases. Emodin (ED), known for its potent anti-inflammatory properties, holds promise in addressing AP. However, its clinical application is hindered by limitations such as low bioavailability and insufficient target specificity. Herein, we developed a novel drug delivery system using macrophage membrane-coated UiO-66-NH2 nanoparticles loaded with ED (MVs-UiO-ED). UiO-66-NH2 was successfully synthesized and characterized, revealing an octahedral structure with a suitable size distribution. The successful loading of ED onto UiO-66-NH2 was confirmed by ultraviolet and infrared spectroscopy. Subsequently, MVs-UiO-ED was prepared by coating macrophage membrane-derived vesicles onto UiO-ED, resulting in a biomimetic delivery system. In vitro release studies demonstrated that MVs-UiO-ED exhibited a sustained-release profile, indicating its potential for prolonged drug circulation. An AP mouse model was established to evaluate the therapeutic efficacy of MVs-UiO-ED. Compared with the model group, MVs-UiO-ED significantly reduced serum levels of α-amylase and lipase, two indicators of pancreatitis severity. Furthermore, histopathological examinations revealed that MVs-UiO-ED ameliorated pancreatic tissue damage. This study underscores the potential of MVs-UiO-ED as an effective therapeutic approach for AP.

Sustainable synthesis of magnetic Sargassum siliquastrum activated carbon loaded with NiS nanorods for adsorption of 2,4-D herbicide

The upgrade of sustainable resource waste into a valuable and beneficial material is an urgent task. The current paper outlines the development of an economical, sustainable, and prolonged adsorbent derived from Sargassum siliquastrum biomass and its use for potent 2,4-dichlorophenoxyacetic acid (2,4-D) removal. A simple carbonization approach was applied to obtain the highly functionalized carbon structure, which was subsequently transformed into a novel magnetic nanoadsorbent. The magnetic nanoadsorbent was characterized using Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), Brunauer Emmett Teller (BET)-specific surface area, and vibrating sample magnetometer (VSM). The characterization results confirm the successful formation of a high specific surface area and a uniform distribution of Fe3O4/NiS NPs grafted activated carbon. The adsorption kinetics was more accurately described via the pseudo-second order model; nevertheless, the isothermal data showed that the Langmuir model was most suitable. The monolayer adsorption capacity for 2,4-D was 208.26 ± 15.75 mg/g at 328 K. The favourability and spontaneity of the adsorption process were demonstrated by thermodynamic studies. The adsorbent displayed exceptional selectivity for 2,4-D and high stability in multi-cycle use. Electrostatic attraction, π-π stacking, and hydrogen bonding were all believed to have an impact on the sorbent's robust 2,4-D adsorption. Analyses of real tap and Nile River water samples showed little effect of the sample matrix on 2,4-D adsorption. This study presents an innovative approach for developing highly efficient adsorbent from natural biomass and offers an affordable way to recycle algal waste into beneficial materials.

Study on adsorption of salicylic acid and sulfosalicylic acid by MOF-sodium alginate gel beads obtained in a green way

A composite (ZS-UiO-66-NH2) zirconium crosslinked sodium alginate gel beads (ZS)-metal-organic skeleton (UiO-66-NH2) were prepared in this study through in-situ growth under simple, green and mild conditions for removal of the salicylic acid (SA) and sulfosalicylic acid (SSA) from water. The physicochemical properties of ZS-UiO-66-NH2 were characterized using various analytical methods. The influencing factors in the adsorption process including pH of solution, amount of adsorbent, coexisting ions, adsorption time, reaction temperature and equilibrium concentration of SA/SSA were performed in batch adsorption. The experimental results indicated that ZS-UiO-66-NH2 had high stability and could achieve efficient adsorption of SA/SSA in broad pH range (2-9) and salinity (0-0.2 mol·L-1). SA and SSA adsorbed on the composite at 293 K reached high values of 193 and 167 mg·g-1 from Langmuir model, respectively. Kinetic and isotherm studies demonstrated that the adsorption processes were mainly multilayer heterogeneous chemisorption. Thermodynamic data manifested that the two processes were exothermic and spontaneous with increasing entropy. ZS-UiO-66-NH2 can effectively remove SA/SSA from simulated wastewater under different pH and can be reused after elution with a NaHCO3 solution (5 mmol·L-1). The ZS-UiO-66-NH2 composite has great potential for removing SA/SSA from actual water bodies.

Remediation of water tainted with noxious aspirin and fluoride ion using UiO-66-NH2 loaded peanut shell

One green adsorbent, UiO-66-NH2 modified peanut shell (c-PS-MOF), was prepared in a green synthetic route for improving the capture level of aspirin (ASP) and fluoride ion (F-). The adsorption properties of c-PS-MOF were evaluated by batch experiments and its physicochemical properties were explored by various characterization methods. The results showed that c-PS-MOF exhibited a wide range of pH applications (ASP: 2-10; F-: 3-12) and high salt resistance in the capturing processes of ASP and F-. The unit adsorption capacity of c-PS-MOF was as high as 84.7 mg·g-1 for ASP as pH = 3 and 11.2 mg·g-1 for F- under pH = 6 at 303 K from Langmuir model, respectively. When the solid-liquid ratio was 2 g·L-1, the content of ASP (C0 = 100 mg·L-1) and F- (C0 = 20 mg·L-1) in solution can be reduced to 0.48 mg·L-1 and 1.05 mg·L-1 separately. The recycling of c-PS-MOF can be realized with 5 mmol·L-1 NaOH as eluent. Analysis of simulated water samples showed that c-PS-MOF could be used to remove ASP and F- from actual water. The c-PS-MOF is promising to bind ASP and F- from rivers, lakes, etc.

Metal-Organic Frameworks as Potential Agents for Extraction and Delivery of Pesticides and Agrochemicals

Pesticide contamination is a global issue, affecting nearly 44% of the global farming population, and disproportionately affecting farmers and agricultural workers in developing countries. Despite this, global pesticide usage is on the rise, with the growing demand of global food production with increasing population. Different types of porous materials, such as carbon and zeolites, have been explored for the remediation of pesticides from the environment. However, there are some limitations with these materials, especially due to lack of functional groups and relatively modest surface areas. In this regard, metal-organic frameworks (MOFs) provide us with a better alternative to conventionally used porous materials due to their versatile and highly porous structure. Recently, a number of MOFs have been studied for the extraction of pesticides from the environment as well as for targeted and controlled release of agrochemicals. Different types of pesticides and conditions have been investigated, and MOFs have proved their potential in agricultural applications. In this review, the latest studies on delivery and extraction of pesticides using MOFs are systematically reviewed, along with some recent studies on greener ways of pest control through the slow release of chemical compounds from MOF composites. Finally, we present our insights into the key issues concerning the development and translational applications of using MOFs for targeted delivery and pesticide control.