Magnetic Fe3O4 /Al2O3 /MnO2 ternary nanocomposite: Synthesis and characterization for phosphorus desorption from acidic soils using dialysis membrane tube

Monitoring phosphorus fertilization is crucial for controlling the concentration of biologically available soil P. Over the years, several methodologies have been used, including successive cropping in a greenhouse or field, as well as extractions employing P sink procedures. The latter procedures are ideal laboratory experiments to show the soil's ability to supply P and to explore the P-residual release kinetics. Following these methodologies, long-term P desorption studies have been developed using dialysis membrane tubes filled with nanomaterial solutions. In this study, a magnetic nanocomposite (Fe3O4/Al2O3/MnO2) was synthesized and characterized utilizing cutting-edge instruments such as XRD, FTIR, FAAS, BET, SEM, and EDX. The resulting material had a crystalline size and surface area of 22.75 nm and 203.69 m2/g, respectively, and was employed for long-term P-desorption and kinetics experiments while filled in dialysis membrane tubes. The P-desorption experiment was conducted on four separate acidic soil samples that were cultured for 122 days with four different P concentrations. The findings demonstrated a direct relationship between P-desorbed and P-treatment, as well as with desorption time. The minimum desorption was obtained from the control of Boji Dirmaji soil P0 (1.16-9.36) and the highest desorption from Nedjo soil with P3 (5.23-30.35 mg/kg) treatment over 1-28 days. The rate of P release from soil to solution or diffusion through the membrane was determined by pseudo-first-order kinetics with a rate constant (0.021-0.028 hr-1). This method has the potential to measure fixed-P availability by mimicking it as a plant would, with high P-desorption efficiency and quick P-release capacity.

A green, efficient and stable platform based on hyperbranched quaternized hydrothermal magnetic chitosan nanospheres integrated cytomembranes for screening drug candidates from natural products

Compared with traditional tedious organic solvent-assisted separation process in natural medicinal chemistry, cytomembrane (CM) fishing technique became a more appealing and greener choice for screening bioactive components from natural products. However, its large-scale practical value was greatly weakened by the easy fall-off of CMs from magnetic supports, rooted in the instability of common Fe3O4 particles and their insufficient interaction with CMs. In this research, a new green biostable platform was developed for drug screening through the integration of hyperbranched quaternized hydrothermal magnetic carbon spheres (HQ-HMCSs) and CMs. The positive-charged HQ-HMCSs were constructed by chitosan-based hydrothermal carbonization onto Fe3O4 nanospheres and subsequent aqueous hyperbranching quaternization with 1,4-butanediol diglycidyl ether and methylamine. The strong interaction between HQ-HMCSs and CMs was formed via electrostatic attraction of HQ-HMCSs to negative-charged CMs and covalent linkage derived from the epoxy-amine addition reactions. The chemically stable HMCSs and its integration with CMs contributed to dramatically higher stability and recyclability of bionic nanocomposites. With the fishing of osteoblast CMs integrated HQ-HMCSs, two novel potential anti-osteoporosis compounds, narcissoside and beta-ionone, were discovered from Hippophae rhamnoides L. Enhanced osteoblast proliferation, alkaline phosphatase, and mineralization levels proved their positive osteogenesis effects. Preliminary pharmacological investigation demonstrated their potential action on membrane proteins of estrogen receptor alpha and insulin-like growth factor 1. Furthermore, beta-ionone showed apparent therapeutic effects on osteogenic lesions in zebrafish. These results provide a green, stable, cost-efficient, and reliable access to rapid discovery of drug leads, which verifiably benefits the design of nanocarbon-based biocomposites with increasingly advanced functionality.

Tetracycline decontamination from aqueous media using nanocomposite adsorbent based on starch-containing magnetic montmorillonite modified by ZIF-67

In the present study, starch/zeolitic imidazole framework-67 (ZIF-67) modified magnetic montmorillonite nanocomposite adsorbent to remove tetracycline (TC) as an emerging antibiotic-based contaminant from aqueous media. The surface properties of the adsorbents were investigated using FTIR, XRD, SEM, EDX-Map, XPS, TEM, BET, and VSM analysis. The specific surface area of MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite samples were found to be 15.63, 20.54, and 588.41 m2/g, respectively. The influence of pH, adsorbent amount, initial TC concentration, temperature, contact time, and coexisting ions on TC elimination was explored in a batch adsorption system. The kinetic and equilibrium data were well matched with the pseudo-second-order and Langmuir isotherm models, respectively. The maximum monolayer adsorption capacities of TC were obtained to be 40.24, 66.1, and 135.2 mg/g by MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite adsorbents, respectively. Also, thermodynamic studies illustrated that the TC adsorption process is exothermic and spontaneous. Furthermore, the magnetic nanocomposite adsorbent St/MMT-MnFe2O4-ZIF-67 showed good reusability and could be recycled for up to five cycles. This excellent adsorption performance, coupled with the facile separation of the magnetic nanocomposite, gave St/MMT-MnFe2O4-ZIF-67 a high potential for TC removal from aqueous media.

Sustainable synthesis of magnetic Sargassum siliquastrum activated carbon loaded with NiS nanorods for adsorption of 2,4-D herbicide

The upgrade of sustainable resource waste into a valuable and beneficial material is an urgent task. The current paper outlines the development of an economical, sustainable, and prolonged adsorbent derived from Sargassum siliquastrum biomass and its use for potent 2,4-dichlorophenoxyacetic acid (2,4-D) removal. A simple carbonization approach was applied to obtain the highly functionalized carbon structure, which was subsequently transformed into a novel magnetic nanoadsorbent. The magnetic nanoadsorbent was characterized using Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), Brunauer Emmett Teller (BET)-specific surface area, and vibrating sample magnetometer (VSM). The characterization results confirm the successful formation of a high specific surface area and a uniform distribution of Fe3O4/NiS NPs grafted activated carbon. The adsorption kinetics was more accurately described via the pseudo-second order model; nevertheless, the isothermal data showed that the Langmuir model was most suitable. The monolayer adsorption capacity for 2,4-D was 208.26 ± 15.75 mg/g at 328 K. The favourability and spontaneity of the adsorption process were demonstrated by thermodynamic studies. The adsorbent displayed exceptional selectivity for 2,4-D and high stability in multi-cycle use. Electrostatic attraction, π-π stacking, and hydrogen bonding were all believed to have an impact on the sorbent's robust 2,4-D adsorption. Analyses of real tap and Nile River water samples showed little effect of the sample matrix on 2,4-D adsorption. This study presents an innovative approach for developing highly efficient adsorbent from natural biomass and offers an affordable way to recycle algal waste into beneficial materials.

Magnetic xanthan gum-silk fibroin hydrogel: A nanocomposite for biological and hyperthermia applications

A magnetic xanthan hydrogel/silk fibroin nanobiocomposite (XG hydrogel/SF/Fe3O4) was designed, fabricated, and characterized using analyzing methods such as FT-IR, EDX, FE-SEM, XRD, TGA, and VSM to evaluate the exact structure of product nanobiocomposite. The FE-SEM images reveal the presence of spherical shapes exhibiting a narrow size range and homogeneous distribution, measuring between 30 and 35 nm in diameter. The VSM analysis demonstrates the superparamagnetic properties of the XG hydrogel/SF/Fe3O4 nanobiocomposite, exhibiting a magnetic saturation of 54 emu/g at room temperature. The biological response of the nanobiocomposite scaffolds was assessed through cell viability and red blood cell hemolytic assays. MCF10A cells were exposed to a concentration of 1.75 mg/mL of the nanobiocomposite, and after 2 and 3 days, the cell viability was found to be 96.95 % and 97.02 %, respectively. The hemolytic effect was nearly 0 % even at higher concentrations (2 mg/mL). Furthermore, the magnetic nanobiocomposite showed excellent potential for hyperthermia applications, with a maximum specific absorption rate of 7 W/g for 1 mg/mL of the sample under a magnetic field in different frequencies (100, 200, 300, and 400 MHz) and 5 to 20 min time intervals.

Novel magnetic nanocomposites BiFeO3/Cu(BDC) for efficient dye removal

In this study, bismuth ferrite nanoparticles and metal-organic framework, Cu(BDC), were prepared by microwave-assisted combustion in solid state and ultrasound-assisted method, respectively. To enhance the properties of bismuth ferrite nanoparticles and Cu(BDC), we form them as their composite through microwave and ultrasonic probe strategies. Various analyses, including FT-IR, XRD, SEM, DRS, VSM, and so on, were applied to verify the synthesis accuracy. Then, the catalytic performances of the nanoparticles and the as-prepared nanocomposites were evaluated through photocatalytic degradation of methyl orange. Furthermore, the adsorption capacity of the as-synthesized materials was assessed toward the Congo red removal from wastewater. All the results prove that the proposed nanocomposite can be an acceptable candidate for eliminating contaminants from wastewater. The electrochemical properties of bismuth ferrite, BiFeO3/Cu(BDC) nanocomposite 1, and BiFeO3/Cu(BDC) nanocomposite 2 have been studied by cyclic voltammetry.

Heterogeneous electro-Fenton treatment of chemotherapeutic drug busulfan using magnetic nanocomposites as catalyst

The rapid and efficient mineralization of the chemotherapeutic drug busulfan (BSF) as the target pollutant has been investigated for the first time by three different heterogeneous EF systems that were constructed to ensure the continuous electro-generation of H2O2 and •OH consisting of: i) a multifunctional carbon felt (CF) based cathode composed of reduced graphene oxide (rGO), iron oxide nanoparticles and carbon black (CB) (rGO-Fe3O4/CB@CF), ii) rGO modified cathode (rGO/CB@CF) and rGO supported Fe3O4 (rGO-Fe3O4) catalyst and iii) rGO modified cathode (rGO/CB@CF) and multi walled carbon nanotube supported Fe3O4 (MWCNT-Fe3O4) catalyst. The effects of main variables, including the catalyst amount, applied current and initial pH were investigated. Based on the results, H2O2 was produced by oxygen reduction reaction (ORR) on the liquid-solid interface of both fabricated cathodes. •OH was generated by the reaction of H2O2 with the active site of ≡FeII on the surface of the multifunctional cathode and heterogeneous EF catalysts. Utilizing carbon materials with high conductivity, the redox cycling between ≡FeII and ≡FeIII was effectively facilitated and therefore promoted the performance of the process. The results demonstrated almost complete mineralization of BSF through the heterogeneous systems over a wide applicable pH range. According to the reusability and stability tests, multifunctional cathode exhibited outstanding performance after five consecutive cycles which is promising for the efficient mineralization of refractory organic pollutants. Moreover, intermediates products of BSF oxidation were identified and a plausible oxidation pathway was proposed. Therefore, this study demonstrates efficient and stable cathodes and catalysts for the efficient treatment of an anticancer active substance.

Cerium ions immobilized magnetic graphite nitride decorated with L-Alanyl-L-Glutamine as new chelator for enrichment of phosphopeptides

Cerium ions immobilized magnetic graphite nitride material have been prepared using L-Alanyl-L-Glutamine as the new chelator. The resulting Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+, as an immobilized metal ion affinity chromatography (IMAC) sorbent, was reusable. This is due to the strong coordination interaction between L-Alanyl-L-Glutamine and cerium ions. After a series of characterizations, the magnetic nanocomposite showed high surface area, good hydrophilicity, positive electricity, and magnetic response. Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+ had high sensitivity (0.1 fmol), selectivity (α-/β-casein/bovine serum albumin, 1:1:5000), and good recyclability (10 cycles). A total of 647 unique phosphopeptides mapped to 491 phosphoproteins were identified from A549 cell lysate by nano LC-MS analysis.

Exploring the antibacterial potential of magnetite/Quince seed mucilage/Ag nanocomposite: Synthesis, characterization, and activity assessment

In this study, we present a novel core-shell antibacterial agent designed for water disinfection purposes. The nanocomposite is synthesized by combining quince seed mucilage (QSM) as the shell material and Fe3O4 as the core material. The integration of antibacterial silver nanoparticles (Ag NPs) onto the QSM shell effectively prevents agglomeration of the Ag NPs, resulting in a larger contact surface area with bacteria and consequently exhibiting enhanced antibacterial activity. The incorporation of magnetic Fe3O4 NPs with a saturation magnetization of 55.2 emu·g-1 as the core allows for easy retrieval of the nanocomposites from the medium using a strong magnetic field, enabling their reusability. The Fe3O4/QSM/Ag nanocomposite is extensively characterized using XRD, FT-IR, VSM, DLS, FE-SEM, and TEM techniques. The characterization results confirm the successful synthesis of the nanocomposites, with an average particle size of 73 nm and no contamination or impurities detected. The nanocomposites exhibit superparamagnetic properties, with a saturated magnetization of 22.69 emu·g-1, ensuring facile separation from water. The antibacterial activity of the synthesized nanocomposite is evaluated using the disk diffusion method against both Gram-positive and Gram-negative bacteria. The results reveal excellent antibacterial efficacy, with minimum inhibition concentrations (MIC) of 0.8 mg·mL-1 against E. coli and S. typhimurium. Furthermore, the measurement of released silver ions in water using ICP-OES indicates a low concentration of remaining silver ions in the medium, highlighting the controlled release of antimicrobial agents. Overall, this study provides valuable insights into the development of advanced antibacterial agents for water disinfection applications, offering potential solutions to combat microbial contamination effectively.

Determination of bupropion by off-line coupling Fe3O4@CuO&GO nanocomposite and ion mobility spectrometry with application to biological samples

In this study, an off-line coupling of dispersive solid-phase extraction (DSPE) and ion mobility spectrometry (IMS) was introduced to extract and determine bupropion (BUP). A magnetic nanocomposite adsorbent (Fe3O4@CuO&GO) was fabricated by combining graphene oxide (GO) sheets with Fe3O4 and CuO through coprecipitation method. The synthesized adsorbent was characterized and analyzed using the analytical techniques. The effect of extraction parameters including desorption solvent (type and volume), pH, adsorbent amount, contact time, temperature, and the volume of analyte solution on the extraction efficiency was investigated and optimized. The operational parameters of IMS method were also investigated. Under the optimum conditions (DSPE-IMS), the proposed method provided a linear range 4.0-24.0 ng for BUP with a determination coefficient R2 ≥ 0.98. LOD and LOQ values were 0.7 and 2.2 ng for BUP. The repeatability of proposed method was evaluated and reported as relative standard deviation (RSD% ≤ 5.5). The developed method was applied to determine BUP in different biological samples, in which satisfactory results were obtained (93.0-98.0%).

Efficient removal of methylene blue from water using magnetic Alyssum homolocarpum seed gum-based matrix

In this study, we fabricated magnetic Fe₃O₄ nanoparticles conjugated with anionic hydroxypropyl starch-graft-acrylic acid (Fe3O4@AHSG) for the efficient removal of methylene blue (MB) dye from aqueous solutions. The synthesized nanoconjugates were characterized using various techniques. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analysis revealed that the particles exhibited homogeneously distributed nanosized spherical shapes with a mean diameter of 41.72 ± 6.81 nm. The EDX analysis confirmed the absence of impurities, with the Fe₃O₄ particles comprising 64.76 % iron and 35.24 % atomic oxygen. Dynamic light scattering (DLS) measurements showed a monodisperse particle system with a mean hydrodynamic size of 135.4 nm (polydispersity index, PI = 0.530) for the Fe₃O₄ nanoparticles and 163.6 nm (PI = 0.498) for the Fe3O4@AHSG adsorbent. Vibrating sample magnetometer (VSM) analysis indicated superparamagnetic behavior for both Fe₃O₄ and Fe₃O₄@AHSG, with higher saturation magnetization (Ms) observed for Fe₃O₄. The dye adsorption studies demonstrated that the adsorbed dye capacity increased with increasing initial MB concentration and adsorbent dose. The pH of the dye solution significantly influenced the adsorption, with the highest adsorption observed at basic pH values. The presence of NaCl reduced the adsorption capacity due to increased ionic strength. Thermodynamic analysis indicated the thermodynamically favorable and spontaneous nature of the adsorption process. Kinetic studies revealed that the pseudo-second-order model provided the best fit to the experimental data, suggesting chemisorption as the rate-limiting step. Overall, Fe₃O₄@AHSG nanoconjugates exhibited excellent adsorption capacity and could be a promising material for effective removal of MB dye from wastewater.

Fabrication of novel magnetic Mg0.8Cu0.2Fe2O4/SiO2/CeO2 nanocomposite synthesized by a simple ultrasonic-assisted route for organic dye removal using Fenton-like reaction

Fenton-like degradation of contaminants is considered to be a feasible method for eliminating environmental pollution. In this study, a novel ternary Mg_0.8Cu_0.2Fe₂O₄/SiO₂/CeO₂ nanocomposite was fabricated using a novel ultrasonic-assisted technique, and investigated as a Fenton-like catalyst for the removal of tartrazine (TRZ) dye. The nanocomposite was synthesized by first coating the SiO₂ shell around the Mg_0.8Cu_0.2Fe₂O₄ core via a Stöber-like process to form Mg_0.8Cu_0.2Fe₂O₄/SiO₂. Then, a simple ultrasonic-assisted route was used to synthesize Mg_0.8Cu_0.2Fe₂O₄/SiO₂/CeO₂ nanocomposite. This approach provides a simple and environmentally friendly way to produce this material without the use of any additional reductants or organic surfactants. The fabricated sample demonstrated excellent Fenton-like activity. The efficiency of Mg_0.8Cu_0.2Fe₂O₄ was significantly enhanced by the incorporation of SiO₂ and CeO₂, and complete removal of TRZ (30 mg/L) was achieved within 120 min using 0.2 g/L of Mg_0.8Cu_0.2Fe₂O₄/SiO₂/CeO₂. The scavenger test shows that the main active species is the strong oxidizing of hydroxyl radicals (HO^•). Consequently, the Fenton-like mechanism of Mg_0.8Cu_0.2Fe₂O₄/SiO₂/CeO₂ is explained based on the coexistence of Fe³⁺/Fe²⁺, Cu²⁺/Cu⁺, and Ce⁴⁺/Ce³⁺ redox couples. The removal efficiency of TRZ dye remained around 85% after the third recycling run, revealing that the nanocomposite could be employed to eliminate organic contaminants in water treatment. This research opened up a new avenue for expanding the practical application of new-generation Fenton-like catalysts.

Design and development of novel magnetic Lentinan/PVA nanocomposite for removal of diazinon, malathion, and diclofenac contaminants

Increasing population growth and rapid expansion of the industrialization of the world society have caused severe environmental pollution to the planet. This study was carried out in order to investigate the synthesis of biopolymeric texture nano adsorbent based on the Lentinan (LENT), Poly Vinyl Alcohol (PVA) and Iron Oxide nanoparticles for the removal of environmental pollutants. The spherical structural morphology of Fe₃O₄@LENT/PVA nanocomposite has been determined by FE-SEM analyses. According to the obtained results from FTIR analyses, all absorption bands of the Fe₃O₄, LENT, and PVA, had been existed in nanocomposite and approved the successful formation of it. From EDS analysis, it has been revealed that 57.21 wt% Fe, 17.56 wt% C and 25.23 wt% O. Also, the XRD pattern of the nanocomposite, approved the presence of polymeric and magnetic parts with card no. JCPDS, 01-075-0033. The BET analysis has defined specific surface area (47 m²/g) and total pore volume (0.15 cm³/g). Moreover, high heterogeneity and structural stability of the fabricated Fe₃O₄@LENT/PVA nanocomposite have been proven by TGA. Besides, VSM analysis measured great magnetic property of the nanocomposite (48 emu/g). Also, the Fe₃O₄@LENT/PVA nanocomposite potential for effective removal of malathion (MA), Diazinon (DA), and Diclofenac (DF) from watery solution has studied by an experiment based on the efficacy of adsorbent dosage, pH, and temperature. The adsorption kinetics of three pollutants had investigated using pseudo-first-order (PFO), pseudo-second-order (PSO) and intra-particle diffusion (IPD) velocity equations, the results showed that the kinetics followed PSO velocity equations. Also, the Langmuir, Freundlich, Dubbin-Radushkevich (D-R) and Temkin isotherm models had investigated, and the adsorption isotherm was adopted from the Langmuir model. The results demonstrated that in the presence of Fe₃O₄@LENT/PVA nanocomposite, at the optimal conditions (contact time = 180 min, pH = 5, nanocomposite dosage = 0.20 g/L and temperature of 298 K) the maximum adsorption capacity of MA, DF, and DA were 101.57, 153.28, and 102.75 mg/g, respectively. The antibacterial features of the Fe₃O₄@LENT/PVA nanocomposite, had evaluated by Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria, but the result did not show any antibacterial activity.

Magnetic activated carbon synthesized using rubber fig tree leaves for adsorptive removal of tetracycline from aqueous solutions

The current study emphasizes the activated carbon fabrication from rubber fig leaves, the establishment of its composite with iron oxide nanoparticles (RFAC@Fe₂O₃), and its relevance in the adsorptive elimination of tetracycline. The physical and functional properties of RFAC@Fe₂O₃ nanocomposite were uncovered by multiple approaches. Elemental analysis portrayed the existence of carbon, oxygen, and iron, while FESEM analysis revealed that Fe₂O₃ nanoparticle agglomerates were entrenched in the activated carbon matrix rendering it a rough abrasive texture. FT-IR analysis reported the presence of functional groups attributing to CC, -OH, crystalline iron oxide, and Fe-O stretching vibrations, and XRD corroborated graphitic crystalline structure, oxygenated functional groups attached to carbon accompanied by crystalline plane corresponding to Fe₂O₃ nanoparticles. XPS spectra depicted signature peaks for C, O, and Fe, while VSM studies designated its superparamagnetic nature. The high surface area (662.73 m²/g), pore size (3.12 nm), and mesoporous nature of RFAC@Fe₂O₃ make it apt for the adsorption of pollutants from contaminated samples. The adsorption of tetracycline (50 ppm) by RFAC@Fe₂O₃ was maximum at pH 4.0. As the nanocomposite dosage and stirring speed increased to 2.0 g/L and 150 rpm, maximum adsorption was observed due to more active binding sites and improved mixing. Freundlich isotherm along with pseudo-second-order model well described adsorption process divulging that tetracycline was adsorbed onto RFAC@Fe₂O₃ composite in multi-layers by chemisorption. Thermodynamic analysis signified negative values for ΔG°, while positive values for ΔH° and ΔS were obtained, indicating spontaneous feasible endothermic adsorption.

Green synthesis of Ag/Fe3O4 nanoparticles using Mentha longifolia flower extract: evaluation of its antioxidant and anti-lung cancer effects

Herein, a bio-inspired synthetic method for Ag NP adorned biofunctionalized magnetic nanocomposite has been demonstrated. In the procedure, Mentha longifolia flower extract was employed as a template for the green reduction of immobilized Ag ions to corresponding NPs and subsequent stabilization. The phytochemical modification also facilitated the Fe₃O₄ NPs to protect from self-aggregation. The as-synthesized Ag/Fe₃O₄ nanocomposite material was characterized by SEM, TEM, EDX, elemental mapping, VSM, XRD and ICP-OES methods. Towards the biological application, the material was first explored in the anti-oxidant study following DPPH assay and it exhibited a significant radical scavenging capacity. The application of Ag/Fe₃O₄ nanocomposite was further progressed in the anticancer study against standard human lung cancer cell lines (A549 and H358). Cytotoxicity of the material against the cell lines were determined in terms of % cell viability following MTT method and was found to decrease with increase in the material load.

Metanil Yellow dye adsorption using green and chemical mediated synthesized manganese ferrite: An insight into equilibrium, kinetics and thermodynamics

Green Manganese Ferrite (GMF) and Chemical mediated Manganese Ferrite (CMF) were designed and prepared via in situ co-precipitation method and their adsorption potential was compared using the model dye, Metanil Yellow (MY). Previously, an extract of aquatic macrophyte and metal chloride were employed for the development of ecofriendly GMF. Alternatively, CMF has been synthesized through chemical co-precipitation from metal chloride precursors. Several characterization methods, including PSA, BET, TGA, DSC, FTIR, SEM, VSM, EDX, and XRD, were analyzed to reveal the structural and functional properties of the as-synthesized GMF and CMF. Their MY adsorption performances were tested as the function of the operational conditions such as initial solution pH, temperature, nanocomposite dosage, and dye concentration in a batch mode of operation. The pseudo-second order MY adsorption process fits best in Langmuir model which yielded the maximal monolayer adsorption capacity (q_max) of 391.34 mg/g for GMF and 271.89 mg/g for CMF. This outperformance of GMF over CMF was observed due to the augmentation of specified surface functional moieties derived from the phyto-constituents of macrophages. Further, the thermodynamic studies confirmed the chemisorptive and exothermic nature of adsorption processes. Conclusively, with the ease of regeneration and reuse potential, GMF and CMF could be viable contenders for scale up and industrial applications.

Surface magnetization of hydrolyzed Luffa Cylindrica biowaste with cobalt ferrite nanoparticles for facile Ni2+ removal from wastewater

A novel magnetic adsorbent based on hydrolyzed Luffa Cylindrica (HLC) was synthesized through the chemical co-precipitation technique, and its potential was evaluated in the adsorptive elimination of divalent nickel ions from water medium. Morphological assessment and properties of the adsorbent were performed using FTIR, SEM, EDX, XRD, BET, and TEM techniques. The effect of pH, temperature, time and nickel concentration on the removal efficiency was studied, and pH = 6, room temperature (25 °C), contact time of 60 min, and Ni²⁺ ion concentration of 10 mg.L^-1 were introduced as the optimal values. At optimal conditions, the removal efficiency of Ni²⁺ ions using HLC and HLC/CoFe₂O₄ magnetic composite was calculated as 96.38 and 99.13%, respectively. The adsorption process kinetic followed a pseudo-first-order model. Langmuir isotherm was suitable for modelling the experimental data of the Ni²⁺ adsorption. The maximum elimination capacity of HLC and HLC/CoFe₂O₄ samples was calculated as 42.75 and 44.42 mg g^-1, respectively. Furthermore, thermodynamic investigations proved the spontaneous and exothermic nature of the process. The adsorption efficiency was decreased with increasing the content of Ca²⁺ and Na ⁺ cations in aqueous media. During reusability of the synthesized adsorbents, it was found that after 8 cycles, no significant decrease has occurred in the adsorption efficiency. In addition, real wastewater treatment results proved that HLC/CoFe₂O₄ magnetic composite has an excellent performance in removal of heavy metals pollutant from shipbuilding effluent.

Cadmium ion removal from aqueous media using banana peel biochar/Fe3O4/ZIF-67

In the present study, banana peel waste was used as a suitable source for biochar production. The banana peel biochar (BPB) was modified using Fe₃O₄ magnetic and ZIF-67 nanoparticles. The modification of the BPB surface (4.70 m²/g) with Fe₃O₄ and Fe₃O₄/ZIF-67 significantly increased the specific surface of the nanocomposites (BPB/Fe₃O₄: 78.83 m²/g, and BPB/Fe₃O₄/ZIF-67: 1212.40 m²/g). The effect of pH, temperature, contact time, adsorbent dose, and concentration of Cd²⁺ on the efficiency of the Cd²⁺ adsorption was explored. Maximum adsorption efficiencies for BPB (97.76%), BPB/Fe₃O₄ (97.52%), and BPB/Fe₃O₄/ZIF-67 (99.14%) were obtained at pH 6, Cd²⁺ concentration of 10 mg/L, times of 80 min, 50 min, and 40 min, and adsorbent doses of 2 g/L, 1.5 g/L, and 1 g/L, respectively. Thermodynamic measurements indicated that the process is spontaneous and exothermic. The maximum capacity of Cd²⁺ adsorption using BPB, BPB/Fe₃O₄, and BPB/Fe₃O₄/ZIF-67 were obtained 20.63 mg/g, 30.33 mg/g, and 50.78 mg/g, respectively. The Cd²⁺ adsorption using magnetic nanocomposites followed the pseudo-first-order kinetic model. The results showed that studied adsorbents especially BPB/Fe₃O₄/ZIF-67 have a good ability to adsorb-desorb Cd²⁺ and clean an effluent containing pollutants.

Adsorptive removal of AB113 dye using green synthesized hydroxyapatite/magnetite nanocomposite

In the present study, magnetite nanoparticles (Fe₃O₄NPs) synthesized using Thunbergia grandiflora leaf extract as a reducing agent were doped with hydroxyapatite sourced from waste bivalve clamshells to produce hydroxyapatite/magnetite nanocomposite (HA/Fe₃O₄NPs). The magnetic nanocomposite was examined using several characterization techniques. The results of XRD and FESEM, analysis showed HA/Fe₃O₄NPs have a crystalline phase and irregular spherical particles respectively. EDAX and FTIR confirmed the presence of specific elements and functional groups of both iron oxide and hydroxyapatite nanoparticles respectively. The surface area and superparamagnetic property of the composite were determined by BET and VSM analysis. Central Composite Design (CCD) was used to optimize the adsorption process to remove of AB113 from aqueous solutions. The optimal adsorption efficiency was found out to be 94.38% at pH 8, AB113 dye concentration 54 ppm, HA/Fe₃O₄NPs dose 84 mg, and an agitation speed of 174 rpm. The monolayer Langmuir isotherm was the best model with a sorption capacity of 109.98 mg/g which was higher than the reported values. The pseudo-second-order kinetic model displayed a good fit with an R² = 0.99. Thermodynamic parameters were assessed which confirmed the exothermic adsorption process. Therefore, the synthesized magnetic nanocomposite can be employed as a novel nanoadsorbent for the removal of anionic dyes from waste effluents.

CuO nanoparticles decorated on hydroxyapatite/ferrite magnetic support: photocatalysis, cytotoxicity, and antimicrobial response

Photocatalysts supported in magnetic nanocomposites for application in environmental remediation processes have been evaluated for removing contaminants due to easy recovery and low toxicity to the ecosystem. In this work, copper oxide (CuO) nanoparticles with photocatalytic properties were decorated on magnetic support constituted by hydroxyapatite (HAP) and ferrite to achieve efficiency in contaminated water remediation under visible light irradiation. First, nanomaterials were obtained by precipitation route, allowing fast and straightforward synthesis. Then, CuO nanoparticles with 6 nm diameter were efficiently decorated on magnetic support (25 nm), showing a high ability to absorb visible light irradiation (bandgap) to promote electronic transition and charge separation. Under visible irradiation, CuO promotes the H₂O₂ reduction in the conduction band (BC) to form hydroxyl radicals (^•OH), which are responsible for rhodamine B (RhB) dye degradation (> 90% in 60 min). Magnetic hysteresis assays confirmed the magnetic properties of HAP/ferrite support, which enabled the recovery and reuse of the magnetic photocatalyst efficiently up to 3 cycles. Due to low Cu²⁺ leaching after the photocatalytic application stage, cytotoxicity assay for the Allium cepa seeds did not exhibit abnormal cells other than those commonly found. Furthermore, the CuO-decorated nanoparticles showed bactericidal activity against S. aureus (Gram-positive) and E. coli (Gram-negative) microorganisms, being more significant for the first one. Thus, the developed nanocomposite of CuO nanoparticles decorated on the magnetic support surface showed to be a complete system for water remediation, acting in contaminant degradation under visible light irradiation and bactericidal control with environmentally friendly characteristics.Graphical abstract CuO nanoparticles decorated on hydroxyapatite/ferrite magnetic support acting as a photocatalytic and bactericidal system.

Phage long tail fiber protein-immobilized magnetic nanoparticles for rapid and ultrasensitive detection of Salmonella

There is an urgent need to develop fast and sensitive detection methods for foodborne pathogens. But the conventional culture method that typically requires 2-3 days is not ideal for the rapid analysis. Food samples demonstrate a great challenge for direct detection due to the complex matrix. Hence, we present a new method based on the phage long-tail-fiber proteins (LTF4-a) immobilized magnetic nanoparticles (MNPs) for specific separation and concentration of Salmonella. The LTF4-a-MNP was prepared via the coupling of recombinant LTF4-a with MNPs and used to isolate and enrich Salmonella cells from contaminated food samples. The captured material was further integrated with the direct PCR program for accurate detection of Salmonella. Our study successfully established a new method for detecting contaminated food samples of Salmonella, the overall approach took no more than 3 h, which allowed a detection limit of 7 CFU/mL, demonstrating a promising alternative to the immunomagnetic separation method by replacing antibodies or aptamers, that is compatible with downstream analysis.

Development of a magnetic MoS2 system camouflaged by lipid for chemo/phototherapy of cancer

Untargeted release of traditional chemotherapeutic drugs can damage normal tissues in the body and cause serious side effects for patients. Therefore, the research of targeted drug delivery system based on nanomaterials has become a hot topic in the field of cancer therapy. Magnetic molybdenum disulfide (mMoS₂) was modified by liposomes with a cell membrane-like structure to prepare nanocarrier complex (mMoS₂-Lipid) with high biocompatibility and stability. Then, combined photo-chemotherapeutic therapy was realized both in vitro and in vivo by its ultra-high photothermal conversion efficiency and excellent drug loading profile of mMoS₂-Lipid. The characterization showed that the lamellar magnetic molybdenum disulfide modified by liposomes was not easy to aggregate in physiological solution, and had a lower non-specific protein adsorption rate, which was beneficial for biomedical application. In vitro cell experiments exhibited a successful cellular uptake profile of MCF-7 cells with no significant cytotoxicity, while a concentration dependent cytotoxicity for both chemotherapy alone and photo-chemotherapy combined therapy. Compared with the unmodified mMoS₂, mMoS₂-Lipid injected into mice through tail vein can accumulate more in the tumor site, and in vivo anti-tumor studies have shown that the synergistic treatment of the mMoS₂-Lipid has an obvious inhibitory effect on the tumor with less toxic and side effects on mice. In conclusion, mMoS₂-Lipid treatment system provides a safe, rapid and effective choice for the treatment of breast cancer in the future.

New and efficient magnetic nanocomposite extraction using multifunctional deep eutectic solvent based on ferrofluid and vortex assisted-liquid-liquid microextraction: Determining primary aromatic amines (PAAs) in tetra-packed fruit juices

In this work, a novel magnetic nanocomposite solvent (MNCS) based on ferrofluid and multifunctional deep eutectic solvent (MDES) was synthesized and applied in vortex assisted-liquid-liquid microextraction (VA-LLME). The ferrofluid has been composed from zirconium phosphate (modified magnetic graphene oxide) and tetrabutylammonium bromide-octanoic acid deep eutectic solvent (MGO/α-ZrP@TBAB-OA). This efficient method was employed to determine primary aromatic amines including aniline, 4-methoxyanniline, 4,4'-diaminodiphenylmethane, orthotoluidine, 2,6-dimethylaniline, 2-naphtylamine in tetra-packed juice samples. The proposed method showed the excellent extraction efficiency of PAAs according to strong interactions of new extraction solvent including electrostatic, π-π, and hydrogen bonding attractions. The found levels of PAAs are lower than the limit of quantifications (2.0 µg L^-1). Therefore, the migration of PAAs from packaging to the juice samples is lower than permitted level (<10 µg kg^-1). The results indicated high potential use of the offered method to analyze aromatic amine compounds in foodstuff and biologic samples in the future.

Ag NPs supported chitosan-agarose modified Fe3O4 nanocomposite catalyzed synthesis of indazolo[2,1-b]phthalazines and anticancer studies against liver and lung cancer cells

In this article we report a novel Ag NPs fabricated chitosan-agarose composite functionalized core-shell type Fe₃O₄ nanoparticle (Ag/CS-Agar@Fe₃O₄). The biogenic material was analyzed over a number of physicochemical methods like, FT-IR, FE-SEM, TEM, EDX, XRD, VSM and ICP-OES. In catalytic exploration we aimed the synthesis of diverse 2H-indazolo0-b]phthalazine-trione derivatives via one-pot three component coupling of phathalalhydrazide, dimedone and different aldehydes. It afforded good to excellent yields under solvent-less conditions. Robustness of the catalyst was justified by catalyst recyclability for consecutive 10 times, hot filtration and leaching tests. Again, biological activity of the material was evaluated by studying the antioxidant and cytotoxicity properties over lung and liver cancer cell lines. Antioxidant potential of Ag/CS-Agar@Fe₃O₄ was assessed by DPPH radical scavenging studies and the corresponding IC50 was found to be 96.57 μg/mL. Liver and lung cancer studies over Ag/CS-Agar@Fe₃O₄ was carried out by MTT assay against HepG2 and A549 cell lines. The corresponding IC50 values were found as 192.35 and 365.28 μg/mL respectively. % Cell viability of the nanomaterial decreased dose dependently over both the cell lines without any cytotoxicity on normal cell line. The results demonstrates Ag/CS-Agar@Fe₃O₄ nanocomposite to be an efficient chemotherapeutic drug against the lung and hepatocellular carcinoma cells.

Fluoride ions sorption using functionalized magnetic metal oxides nanocomposites: a review

Fluoride is an anionic pollutant found superfluous in surface or groundwater as a result of anthropogenic actions from improper disposal of industrial effluents. In drinking water, superfluous fluoride has been revealed to trigger severe health problems in humans. Hence, developing a comprehensive wastewater decontamination process for the effective management and preservation of water contaminated with fluoride is desirable, as clean water demand is anticipated to intensify considerably over the upcoming years. In this regard, there have been increased efforts by researchers to create novel magnetic metal oxide nanocomposites which are functionalized for the remediation of wastewater owing to their biocompatibility, cost-effectiveness, relative ease to recover and reuse, non-noxiousness, and ease to separate from solutions using a magnetic field. This review makes an all-inclusive effort to assess the effects of experimental factors on the sorption of fluoride employing magnetic metal oxide nanosorbents. The removal efficiency of fluoride ions onto magnetic metal oxides nanocomposites were largely influenced by the solution pH and ions co-existing with fluoride. Overall, it was noticed from the reviewed researches that the maximum sorption capacity using various metal oxides for fluoride sorption was in the order of aluminium oxides >cerium oxides > iron oxides > magnesium oxides> titanium oxides, and most sorption of fluoride ions was inhibited by the existence of phosphate trailed by sulphate. The mechanism of fluoride sorption onto various sorbents was due to ion exchange, electrostatic attraction, and complexation mechanism.

Efficient remediation of chlorpyrifos pesticide from contaminated water by superparamagnetic adsorbent based on Arabic gum-grafted-polyamidoxime

A novel organic/inorganic biosorbent hydrogel nanocomposite based on Arabic Gum-grafted-polyamidoxime and CuFe₂O₄ magnetic nanoparticles (AG-g-PAO/CuFe₂O₄) was prepared in three steps. The prepared hydrogel nanocomposite was well characterized using Fourier transform infrared (FT-IR), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), CHN, zeta potential, and Brunauer-Emmett-Teller (BET) analyses. The adsorption efficiency of the AG-g-PAO/CuFe₂O₄ for removing an organophosphorus pesticide (OPP) (chlorpyrifos) from aqueous solutions was studied. Effect of different experimental conditions such as the pH of the solution, adsorbent dosage, contact time, initial concentration on adsorption efficiency was evaluated. The experimental adsorption data described well by the Langmuir isotherm model and the maximum adsorption capacity (Q_max) of the prepared biosorbent for chlorpyrifos was found 769.23 mg/g. The adsorption kinetic data were well fitted by the pseudo-second-order model. It was suggested that the chlorpyrifos was adsorbed onto AG-g-PAO/CuFe₂O₄ hydrogel biosorbent mainly through electrostatic interaction and hydrogen bonding. The result of adsorption-desorption experiments revealed that the AG-g-PAO/CuFe₂O₄ can be excellently regenerated and reused after three sequential runs without a considerable decline in its adsorption performance.

High-efficiency adsorption of phenanthrene by Fe3O4-SiO2-dimethoxydiphenylsilane nanocomposite: Experimental and theoretical study

Phenanthrene (PHE), as one of representative polycyclic aromatic hydrocarbons (PAHs) can cause serious adverse effects on human health, developing effective adsorbents to alleviate PHE contamination is in urgent demand. A novel Fe₃O₄-SiO₂-Dimethoxydiphenylsilane (Fe₃O₄-SiO₂-2DMDPS) nanocomposite was fabricated from encapsulation and grafting process. Magnetic Fe₃O₄ nanoparticles were served as preliminary matrix material, SiO₂ was used to link the magnetic oxide and provide hydroxyl groups for proceeding the silane coupling reaction subsequently, and the aromatic rings in DMDPS could provide active sites for PHE adsorption via π-π interaction. SEM-EDS, TEM, BET, VSM, XRD, FTIR, Raman, Zeta potential, and XPS techniques were used to characterize magnetic nanocomposite. The prepared Fe₃O₄-SiO₂-2DMDPS exhibited an excellent adsorption performance towards PHE, it could maintain 75.97% adsorption capacity after four regeneration cycles. Homogeneous adsorption acted crucial role in the whole adsorption process and film diffusion was the rate-controlling procedure. Theoretical calculations put forward the most favorable bonding modes between Fe₃O₄-SiO₂-2DMDPS and PHE molecules, confirmed the π-π interaction was valid and it usually existed in the form of parallel-displaced. This work might aid us to develop effective modification strategy for Fe₃O₄ nanoparticles and expand its application in the PAHs removing field.

Magnetic activated charcoal/Fe2O3 nanocomposite for the adsorptive removal of 2,4-Dichlorophenoxyacetic acid (2,4-D) from aqueous solutions: Synthesis, characterization, optimization, kinetic and isotherm studies

Magnetic activated charcoal/Fe₂O₃ nanocomposite (AC/Fe₂O₃NC) was fabricated using Spondias dulcis leaf extract by a facile method and used for the adsorptive removal of 2,4-Dichlorophenoxyacetic acid (2,4-D) from aqueous solutions for the first time. The nanocomposite was characterized by methods such as FE-SEM, EDS, XRD, FTIR, TGA, VSM, and BET to identify and confirm the surface morphology, elemental composition, crystalline nature, functional groups, thermal stability, magnetic behavior, and surface area respectively. Box-Behnken Design (BBD) - an optimization method, which belongs to the Response surface methodology (RSM) and a modeling tool - Artificial Neural Network (ANN) were employed to design, optimize and predict the relationship between the input parameters (pH, initial concentration of 2,4-D, time and agitation speed) versus the output parameter (adsorption efficiency of 2,4-D). Adsorption efficiency of 98.12% was obtained at optimum conditions (pH: 2.05, initial concentration: 32 ppm, contact time: 100 min, agitation speed: 130 rpm, temperature: 30 °C, and dosage: 0.2 g/L). The predictive ability of the ANN was superior (R² = 0.99) than the quadratic model, given by the RSM (R² = 0.93). The equilibrium data were best-fitted to Langmuir isotherm (R² = 0.9944) and the kinetics obeyed pseudo-second-order model (R² = 0.9993) satisfactorily. Thermodynamic studies revealed the spontaneity and exothermic nature of adsorption. The maximum adsorption capacity, q_m was found to be 255.10 mg/g, substantially larger than the reported values for 2,4-D adsorption by other magnetic nanoadsorbents. Therefore, this nanoadsorbent may be utilized as an excellent alternative for the elimination of 2,4-D from the waterbodies.

Remarkable adsorption of hydroquinone as an anion contaminant by using the magnetic supported bimetallic (NiCu-MOF@MAC) nanocomposites in aqueous solutions

The purposes of this work were to synthesize the core-shell magnetic and nonmagnetic supported bimetallic metal-organic frameworks (MOFs) on the walnut-based activated carbon by the facile preparation method to investigate the feasibility of the performance adsorption of hydroquinone in the aqueous solutions. Activated carbon as a substrate and nickel, copper, and trimesic acid were employed in the structure of the prepared MOFs. The adsorbents were characterized by XRD, FTIR, FESEM, EDX, TEM, BET, and VSM analysis. The goethite and magnetite phases were detected in the morphology of the magnetic adsorbent as confirmed by the XRD pattern. Increases in the pH value from 6 and the adsorption temperature led to a lower adsorption capacity of the samples. The maximum adsorption capacity for the well-dispersed nanoparticles of magnetic (NiCu-MOF@MAC and nonmagnetic (NiCu-MOF@AC) was calculated to be 303.03 and 454.54 mg/g by using linear Langmuir isotherm as an appropriate model, respectively. The achievements from the reusability evaluation illustrated that the magnetic bimetallic MOF nanocomposite could successfully be applied to remove hydroquinone from the wastewater on an industrial scale. The kinetic experimental data was in good agreement with the pseudo-second-order model.

Facile one pot preparation of magnetic chitosan-palygorskite nanocomposite for efficient removal of lead from water

Development of polymeric magnetic adsorbents is a promising approach to obtain efficient treatment of contaminated water. However, the synthesis of magnetic composites involving multiple components frequently involves tedious preparation steps. In the present study, a magnetic chitosan-palygorskite (MCP) nanocomposite was prepared through a straight-forward one pot synthesis approach to evaluate its lead (Pb²⁺) removal capacity from aqueous solution. The nano-architectural and physicochemical properties of the newly-developed MCP composite were described via micro- and nano-morphological analyses, and crystallinity, surface porosity and magnetic susceptibility measurements. The MCP nanocomposite was capable to remove up to 58.5 mg Pb²⁺ g^-1 of MCP from water with a good agreement of experimental data to the Langmuir isotherm model (R² = 0.98). The Pb²⁺ adsorption process on MCP was a multistep diffusion-controlled phenomenon evidenced by the well-fitting of kinetic adsorption data to the intra-particle diffusion model (R² = 0.96). Thermodynamic analysis suggested that the adsorption process at low Pb²⁺ concentration was controlled by chemisorption, whereas that at high Pb²⁺ concentration was dominated by physical adsorption. X-ray photoelectron and Fourier transform infrared spectroscopy results suggested that the Pb adsorption on MCP was governed by surface complexation and chemical reduction mechanisms. During regeneration, the MCP retained 82% Pb²⁺ adsorption capacity following four adsorption-desorption cycles with ease to recover the adsorbent using its strong magnetic property. These findings highlight the enhanced structural properties of the easily-prepared nanocomposite which holds outstanding potential to be used as an inexpensive and green adsorbent for remediating Pb²⁺ contaminated water.

DNA purification using a novel γ-Fe2O3/PEDOT hybrid nanocomposite

We report the synthesis and characterization of a new hybrid magnetic composite formed by the enveloping of magnetic iron oxide nanoparticles (γ-NP) with chains of the conductive polymer PEDOT, and its use for the efficient separation of DNA molecules from complex biological samples, allowing the high yield separation of a pure and high-quality DNA fraction. The successful formation of the γ-NP/PEDOT composite was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, UV visible spectroscopy (UV-Vis), and magnetic hysteresis loop measurements. The nanocomposites showed an excellent capacity of DNA adsorption (Q_e ∼ 248 mg/g) in a model system consisting of salmon sperm DNA. When the γ-NP/PEDOT was used in protocols to extract the DNA from complex samples, the corresponding yield was in the range of 6.4 μg (blood) and 7.3 μg (bacteria), as evaluated quality by UV-Vis, PCR analysis, and electrophoresis assays. We also established that the captured DNA does not need to be detached from the nanocomposite for use as seeding material in PCR amplification experiments. These results and the simplicity of the protocols indicate that the γ-NP/PEDOT composite is a promising DNA absorbent, being competitive with the commercially available magnetic purification kits.

Construction of Fe3O4/SiO2/chitosan-grafted-poly(N-vinylcaprolactam) magnetic nanocomposite and their application in simultaneous extraction of Trans-resveratrol and its metabolites from rat plasma

A novel magnetic nanocomposite of chitosan-grafted-poly(N-vinylcaprolactam) (Fe₃O₄/SiO₂/CHT-g-PNVCL MNC) were synthesized. Chitosan was prepared from shrimp shells Penaeus monodon by a green deacetylation approach. N-vinylcaprolactam was first polymerized on the surface of Fe₃O₄ magnetic nanoparticles using surface-initiated atom transfer radical polymerization. Then, the Fe₃O₄ nanoparticles modified with carboxyl-terminated- poly(N-vinylcaprolactam) was grafted onto chitosan. Various techniques were used to characterize of physicochemical properties of synthesized nanomaterials. The application of Fe₃O₄/SiO₂/CHT-g-PNVCL MNC was utilized as a novel adsorbent for the simultaneous extraction of trans-resveratrol and its major phase II metabolites from rat plasma. A qualitative analysis was performed using ultra-performance liquid chromatography triple-quadrupole tandem mass spectrometry. Response surface methodology based on central composite design was used to optimize the extraction procedure including pH, amount of adsorbent, extraction time, desorption time, and volume of elution solvent. The established quantitative method succeeded in satisfying FDA requirements regarding biological analysis methods. The results of the validation of the method indicated its acceptable accuracy (-4.4 to 6.9%), linearity (r > 0.995), precision (CV < 6.3%), and stability. The lower limits of quantification of the proposed method achieved were 1.23-1.68 ngmL^-1for target analytes. The information obtained from the method validation has been used to estimate the expanded uncertainty for the determination of trans-resveratrol in rat plasma samples following orally administered trans-resveratrol. The method was applied to study the pharmacokinetics, metabolism, and bioavailability of trans-resveratrol in healthy rats following a single oral or intravenous dose.

Fenton-magnetic based therapy by dual-chemodrug-loaded magnetic hydroxyapatite against colon cancer

Fenton-based therapy is emerging as an effective and selective strategy against cancer. However, a low concentration of transition metal ions, insufficient endogenous H₂O_2, and a high level of antioxidant activity within the cancer cells have hindered the therapeutic efficacy of this strategy. To address these issues, in this study, the Fenton reagent (magnetic hydroxyapatite, mHAP) was accompanied with chemotherapy drugs (cisplatin (CDDP) and methotrexate (MTX)) and static magnetic field (SMF), in such a way to be a pH-, redox-, and magnetic-responsive nanoplatform. In vitro and in vivo experiments revealed higher toxicity of the final construct, MTX.CDDP@mHAP, toward colon cancer cells, as compared with that of free drugs. The most effective antitumor activity was observed as MTX.CDDP@mHAP-treated tumor cells were exposed to SMF (0.9 T) and no noticeable damage was observed in the normal cells and tissues. Active targeting by MTX and magnetic targeting by mHAP under magnetic field increased the tumor selectivity and enhanced the tumor site accumulation and cellular uptake of MTX.CDDP@mHAPs. The released iron ions within the cancer cells trigger the Fenton reaction while the release of chemotherapy drugs, reduction of intracellular glutathione, and application of SMF aggravated the Fenton reaction, subsequently leading to the generation of reactive oxygen species (ROS) and induction of apoptosis. Therefore, Fenton magnetic-based therapy-mediated by MTX.CDDP@mHAP could be considered as a promising strategy against colon cancer with high therapeutic efficiency and biosafety.

Hexavalent chromium removal from water: adsorption properties of in natura and magnetic nanomodified sugarcane bagasse

Biosorption has become a viable and ecological process in which biological materials are employed as adsorbents for the removal of potentially toxic metals, such as hexavalent chromium, from aqueous matrices. This work proposed the use of in natura (SB) and nanomodified sugarcane bagasse (SB-NP) with ferromagnetic nanoparticles (Fe₃O₄) to adsorb Cr(VI) from water. These materials were analyzed by X-ray Spectroscopy (XRD), Scanning Electron Microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR) to investigate their morphology and interaction with Cr(VI). It was observed the efficient impregnation of magnetite on the SB surface and the presence of functional groups such as O-H, C-H, C=O, C-O-C, C-O, and Fe-O (characteristic of magnetite). The best conditions for Cr(VI) removal in aqueous medium were determined by assessing the pH at the point of zero charge (pH_PZC = 6.1 and 5.8 for SB and SB-NP, respectively), adsorption pH and kinetics, and adsorption capacity. Batch procedures were performed using increasing concentrations of Cr(VI), 10-100 mg/L at pH 1.0, and 30 min of contact time. The adsorbent dose was 10 mg/L, and the experimental adsorption capacities (SC_exp) for SB, NP, and SB-NP were 1.49 ± 0.06 mg/g, 2.48 ± 0.57 mg/g, and 1.60 ± 0.08 mg/g, respectively. All Cr contents were determined by flame atomic absorption spectrometry (FAAS). The pseudo-2nd-order kinetic equation provided the best adjustments with r² 0.9966 and 0.9931 for SB and SB-NP, respectively. Six isotherm models (Langmuir, Freundlich, Sips, Temkin, Dubinin-Radushkevich, and Hill) were applied to the experimental data, and Freundlich, Dubinin-Radushkevich (D-R), and Temkin were the models that best described the experimental sorption process. The binding energy values (E) provided by the D-R model were 0.11 ± 0.25, 0.09 ± 0.20, and 0.08 ± 0.25 kJ/mol, for NP, SB-NP, and SB, respectively, and denote a physical interaction for the studied adsorbate-adsorbent system. The nanomodification of the biomass slightly improved the efficiency for the sorption of Cr(VI) and facilitated the removal of Cr(VI)-containing biosorbents from water medium.

Decorating graphene oxide with zeolitic imidazolate framework (ZIF-8) and pseudo-boehmite offers ultra-high adsorption capacity of diclofenac in hospital effluents

This study reports on an easy and scalable synthesis method of a novel magnetic nanocomposite (GO/ZIF-8/γ-AlOOH) based on graphene oxide (GO) nanosheets decorated with zeolitic imidazolate framework-8 (ZIF-8), pseudo-boehmite (γ-AlOOH), and iron oxide (Fe₃O₄) nanoparticles by combining solvothermal and solid-state dispersion (SSD) methods. The nanocomposite was successfully applied to remove of diclofenac sodium (DCF) - a widely used pharmaceutical - from water. Response Surface Methodology (RSM) was used to optimize the adsorption process and assess the interactions among the influencing factors on DCF removal efficiency; including contact time, adsorbent dosage, initial pH, solution temperature, and DCF concentration. Adsorption isotherm results showed a good fitting with the Langmuir isotherm model with an exceptional adsorption capacity value of 2594 mg g^-1 at 30 °C, which was highly superior to the previously reported adsorbents. In addition, kinetic and thermodynamic investigations further illustrated that the adsorption process was fast (equilibrium time = 50 min) and endothermic. The regeneration of GO/ZIF-8/γ-AlOOH nanocomposite using acetic acid solution (10% v/v) after a simple magnetic separation was confirmed in five consecutive cycles, which eliminate the usage of organic solvents. The nanocomposite has also shown a superior performance in treating a simulated hospital effluent that contained various pharmaceuticals as well as other organic, and inorganic constituents.

Adsorption-photocatalytic processes for removal of pentachlorophenol contaminant using FeNi3/SiO2/ZnO magnetic nanocomposite under simulated solar light irradiation

The adsorption followed by photocatalytic degradation process was examined for the pentachlorophenol (PCP) removal from aqueous solution. These processes were accomplished by using FeNi₃/SiO₂/ZnO magnetic nanocomposite as an adsorbent-photocatalytic agent and under the irradiation of solar light. The magnetic nanocomposite used was first synthesized and then was characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD) spectroscopy. The PCP removal efficiency was tested for various factors, including pH, PCP concentration, and nanocomposite dose at different contact times. The characterization results of TEM, FE-SEM, and VSM analysis showed that the synthesized nanoparticles are amorphous and tend to agglomerate due to their high super-paramagnetic property. In addition, the EDX technique showed that the Zn and O elements had the highest weight percent in the synthesized nanocomposite, respectively. On the other hand, XRD analysis revealed that the crystalline size of the nanoparticles was about 42 nm. The kinetic of PCP degradation followed the pseudo-first-order model with R² = 0.978. According to the results of the isotherm study, the adsorption of PCP onto the nanoparticles followed the Freundlich model. The results of adsorption-photocatalytic degradation experiments showed that 100% removal of PCP was obtained at optimum conditions of pH = 3, nanocomposite dose = 0.5 g/L, contact time = 180 min, and initial PCP concentration of 10 mg/L. Through the results obtained from this study, the adsorption process followed by solar light photocatalytic degradation process using FeNi₃/SiO₂/ZnO magnetic nanocomposite is found to be an efficacious treatment method for the removal of PCP contaminant from water and wastewater.

Fabrication of chitosan-coated mixed spinel ferrite integrated with graphene oxide (GO) for magnetic extraction of viral RNA for potential detection of SARS-CoV-2

Genetic variants of the COVID-19 causative virus have been arising and circulating globally. In many countries, especially in developing ones with a huge population, vaccination has become one of the major challenges. SARS-CoV-2 variants' fast transmission rate has an upsurge in the COVID cases, leading to more stress on health systems. In the current COVID-19 scenario, there is the requirement of more adequate diagnostic approaches to check the COVID-19 spread. Out of many diagnostic approaches, a magnetic nanoparticle-based reverse transcription polymerase chain reaction could be nontrivial. The use of magnetic nanoparticles is to separate nucleic acid of SARS-CoV-2 from the patient samples and apply for SARS-CoV-2 detection in an easy and more effective way. Herein, the magnetic nanoparticles are synthesized using the solgel autocombustion methods and then successfully coated with biopolymer (chitosan) using ultrasonication. Chitosan-coated nanoparticles are successfully integrated into the graphene oxide sheets to introduce carboxyl groups. Crystallite size calculation, morphological and magnetic studies of synthesized magnetic nanoparticles, and multifunctional magnetic nanoparticles are done using XRD, SEM, TEM, and VSM, respectively. Besides, the potentiality of the fabricated nanocomposites in RNA extraction protocol is also discussed with schematic representation.

In situ decorated Au NPs on chitosan-encapsulated Fe3O4-NH2 NPs as magnetic nanocomposite: Investigation of its anti-colon carcinoma, anti-gastric cancer and anti-pancreatic cancer

Chitosan is a linear polysaccharide and non-toxic bioactive polymer with a wide variety of applications due to its functional properties such as ease of modification, and biodegradability. In this investigation, magnetic cores (Fe₃O₄) were synthesized using a fabrication method involving coprecipitation of Fe²⁺ and Fe³⁺. Then the magnetic nanoparticles were encapsulated by chitosan layers. In the next step, magnetite-gold composite nanoparticles were synthesized with spherical shapes and sizes ranging from 20 to 30 nm, using sodium citrate as a natural reducing agent. The morphological and physicochemical features of the material were determined using several advanced techniques like FT-IR, ICP analysis, FESEM, EDS, XRD, TEM, XPS and VSM. In the biological part of the present study, the cell viability of Fe₃O₄, HAuCl₄, and Fe₃O₄@CS/AuNPs was very low against human colorectal carcinoma cell lines i.e. Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29, human gastric cancer cell lines i.e. MKN45, AGS, and KATO III, and human pancreatic cancer cell lines i.e. PANC-1, AsPC-1, and MIA PaCa-2. The IC50 of Fe₃O₄@CS/AuNPs against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, HT-29, MKN45, AGS, KATO III, PANC-1, AsPC-1, and MIA PaCa-2 cell lines were 385, 429, 264, 286, 442, 498, 561, 513, 528, and 425 μg/mL, respectively. Thereby, the best cytotoxicity results of our Fe₃O₄@CS/AuNPs were observed in the case of the HCT 116 cell line. Seemingly, the present nanoparticles may be used for the treatment of several types of gastro-duodenal cancers especially colon, gastric, and pancreatic cancers in near future.

MOF-derived cluster-shaped magnetic nanocomposite with hierarchical pores as an efficient and regenerative adsorbent for chlortetracycline removal

The presence of large amounts of antibiotic residues can potentially threaten environmental sustainability and human health. Thus, it is imperative to develop convenient and effective technologies for eliminating antibiotics from aquatic environments, which are major contaminant reservoirs. Herein, based on Zn/Fe-MIL-88B, we designed and synthesized a magnetic nanocomposite (MC) that contains hierarchical pores and as an effective and regenerative adsorbent for the removal of chlortetracycline (CTC) from water. The characteristics of the MC and its CTC adsorption performance were investigated systematically. The synthesized MC sample pyrolyzed at 800 °C (MC-800) consisted of metallic iron and N/O-doped graphitic carbon along with cluster-like particles with a mesoporous structure. Further, the adsorption of CTC on MC-800 (maximum adsorption amount of 1158.0 mg/g) could be described using the Freundlich isotherm model and a pseudo-second-order model, indicating that the surface of MC-800 was heterogeneous. The adsorption is likely driven by weak chemical forces, including hydrogen bond formation, cation-π electron donor-acceptor (EDA), and π-π EDA interactions. Finally, MC-800 could be recovered readily through facile magnetic separation and regenerated such that its adsorption rate remained higher than 85% even after five cycles.

Concentrative isolation of uranium traces in aqueous solutions via resurfaced-magnetic carbon nanotube suspension

The concentrative isolation of metal traces from aqueous solutions is of vital importance for environmental and industrial processes. Developing reliable systems of nanoscale that can be fine-tuned to effectively isolate these metals remains an intriguing aim which can potentially beget economic benefits and mitigate major environmental concerns. Here we demonstrate a conceptual metal extraction system where magnetic multi-wall carbon nanotubes (M-MWCNTs) are surface-equipped with a molecular network of polyethylenimine (PEI) to serve as a reusable nano-ionic exchanger, referred to as "M-MWCNTs-PEI". The designed nano-ionic exchanger forms readily stable suspensions with the metal-bearing aqueous solutions eliminating the need for vigorous agitation. Besides, it can be magnetically manipulated and separated in/from the solution. To exemplify its potential for the isolation of metal traces, the M-MWCNTs-PEI was tested with the uranium trace ions in aqueous media. The M-MWCNTs-PEI featured distinct sorption capacity of ~488 mg/g at pH 6, with moderate, but stable, binding affinity toward uranium ions. As such, excellent isolation performance is demonstrated while bound uranium ions are effectively concentrated and recovered from the interfacial PEI molecular network. This was efficiently achieved by exposing the loaded M-MWCNTs-PEI to solutions of small volumes and specific chemistry. Such combined qualities of large capacity and reusability have not been observed with the previously reported ion exchange systems. Altogether, our observations here demonstrate how functional systems of nanoscale can be adapted for industrial applications while this concept can be extended to address other important resources such as rare-earth and lanthanide elements.

Metal-organic framework MIL101 (Cr)-NH2 functionalized magnetic graphene oxide for ultrasonic-assisted magnetic solid phase extraction of neonicotinoid insecticides from fruit and water samples

In this work, a magnetic nanocomposite composed of graphene oxide (GO), silica-coated cobalt ferrite (CoFe2O4@SiO2) nanoparticles and amino-functionalized metal-organic framework (MIL 101 (Cr)-NH2) was fabricated and employed for ultrasonic-assisted magnetic solid phase extraction (UA-MSPE) of neonicotinoid insecticides. Various techniques such as Fourier transform infrared (FT-IR) spectrometry, vibrating sample magnetometry (VSM), energy-dispersive X-ray spectroscopy (EDS) and field emission scanning electron microscope (FE-SEM) measurements were executed to investigate features and morphology of the adsorbent. The magnetic graphene oxide functionalized MIL-101 (Cr)-NH2 (MGO/MIL) combines the advantages of magnetic GO and MIL 101(Cr)-NH2 such as excellent thermal and chemical stability, high surface area, accessible coordinative unsaturated sites, sufficient stability in aqueous solutions and rapid and easy separation from the solution. Some of the important extraction factors such as type and volume of desorption solvent, desorption time, salt concentration, adsorbent amount, pH and extraction time were investigated in detail to achieve high MSPE recovery. In optimal condition, the limits of detection (LODs) for Acetamiprid and Imidacloprid were achieved 0.022 and 0.019 ng mL-1, respectively. Good determination coefficients (R2 more than 0.9990) with satisfactory linearity in the range of 0.064-3500 ng mL-1 were found for this method. The relative standard deviations for intra- and inter-day analyses were in the range of 3.93-4.56% and 7.80-8.50%, respectively. The method was successfully used for analyzing of neonicotinoid insecticides in water and fruit samples and acceptable recoveries from 82.13% to 102.27% were obtained. The results indicated that the nanocomposite is feasible for the adsorption of trace amounts of the target analytes from the fruit and water samples.

Ag NPs on chitosan-alginate coated magnetite for synthesis of indazolo[2,1-b]phthalazines and human lung protective effects against α-Guttiferin

Biocomposite nanomaterials have been evolved as the new generation catalysts and therapeutic supplement in these days. Magnetically isolation has added new features to this category. This has encouraged us to synthesize a novel Ag NP adorned chitosan-alginate dual bio-polysaccharide (two of the more versatile polysaccharides) modified core-shell magnetic nanocomposite (Fe₃O₄/CS-Alg/Ag NPs). The material was meticulously characterized following different physicochemical techniques, such as, FT-IR, ICP-OES, FESEM, EDX, atomic mapping, TEM, VSM, XRD and XPS studies. The as synthesized material was catalytically explored in the one-pot multicomponent synthesis of biologically potent 2H-indazolo[2,1-b]phthalazine-trione derivatives involving a wide range of substrates. The reactions were ended up with excellent yields under solvent-free heating conditions. The catalyst recyclability, heterogeneity and leaching tests were performed to ensure its high stability and robustness. It could be reused as much as 10 times in succession with almost unchanged catalytic performances. In the lung protective part of the present research, the human lung toxicity was induced by α-Guttiferin. The cell viability of lung MRC-5, CCD19Lu, WI-38, and BEAS-2B cell lines was measured by trypan blue assay. Caspase-3 activity was assessed by the caspase activity colorimetric assay kit and mitochondrial membrane potential of lung cells was studied by Rhodamine123 fluorescence dye. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) test was used to show DNA fragmentation and apoptosis of lung cells. Also, the Rat inflammatory cytokine assay kit was used to measure the concentrations of inflammatory cytokines. The catalyst-treated cell cutlers significantly (p ≤ 0.01) reduced the DNA fragmentation, caspase-3 activity, and inflammatory cytokines concentrations, and raised the mitochondrial membrane potential and cell viability in the high concentration of α-Guttiferin-treated lung MRC-5, CCD19Lu, WI-38, and BEAS-2B cells. The best result of lung protective properties of catalyst against α-Guttiferin was seen in the high dose of catalyst i.e., 4 μg. DPPH test revealed similar antioxidant potentials for catalyst and butylated hydroxytoluene. The catalyst inhibited half of the DPPH molecules in the concentration of 171 μg/mL. According to the above results, catalyst can be administrated as a lung protective drug for the treatment of lung diseases after approving in the clinical trial studies in humans.

In situ immobilization of ultra-fine Ag NPs onto magnetic Ag@RF@Fe3O4 core-satellite nanocomposites for the rapid catalytic reduction of nitrophenols

Novel magnetic Ag@RF@Fe₃O₄ core-satellite (MCS) nanocomposites were prepared through in situ photoreduction upon bridging Fe(III) and Ag⁺ via hydroxyl groups in resorcinol formaldehyde (RF) resin by virtue of the coordination effect. The catalytic activity of MCS nanocomposites was evaluated based on catalytic 4-nitrophenol (4-NP) reduction with NaBH₄ as the reducing agent. It was noteworthy that the MCS-3 was beneficial to obtain a superior reaction rate constant of 2.27 min^-1 and a TOF up to 72.7 h^-1. Moreover, the MCS could be easily recovered by applying an external magnetic field and was reused for five times without significantly decrease in catalytic activity. Kinetic and thermodynamic study revealed that catalytic 4-NP reduction using MCS nanocatalysts obeyed the Langmuir-Hinshelwood mechanism and was controlled by the diffusion rate of substrates. Overall, the immobilization of ultra-fine Ag nanoparticles and the extremely negative potentials around MCS nanocomposites, which were effective for the diffusion of reactants, synergistically accelerated the catalytic reduction reactions.

Optimization, equilibrium, adsorption behavior and role of surface functional groups on graphene oxide-based nanocomposite towards diclofenac drug

Aquatic contamination of diclofenac (DCF), an emergent non-steroidal anti-inflammatory drug (NSAIDs), can result in adverse effects to many ecosystems through biomagnification. Hence, introducing effective remediation techniques to sequester the pharmaceutical wastes is highly fundamental to prevent their accumulation in the environment. Generally, adsorption has been presented as a green and efficient approach. Herein, we report the characterization and application of the novel magnetic nanocomposite (GO@CoFe₂O₄) derived from cobalt-based ferrite (CoFe₂O₄) and graphene oxide (GO) for DCF adsorption. For the optimization procedure, the response surface methodology (RSM) was adopted to investigate the impacts of DCF concentration (1.6-18.4 mg/L), DCF dosage (0.08-0.92 g/L), and solution pH (2.6-9.4) to find the optimum conditions for DCF removal, at 10.5 mg/L, 0.74 g/L, and pH 4, respectively. For the adsorption experiments, the kinetic, isotherm, thermodynamic, and intraparticle diffusion models were systematically studied. Moreover, we have elucidated the role of functional groups on the surface of GO@CoFe₂O₄ in enhancing the adsorption of DCF drug. With good removal efficiency (up to 86.1%), high maximum adsorption capacity (32.4 mg/g), GO@CoFe₂O₄ can be a potential candidate to eliminate DCF drug from water.

Enhanced adsorption performance and regeneration of magnetic Fe3O4 nanoparticles assisted extracellular polymeric substances in sulfonamide-contaminated water

It is still unclear about the superiority of the nanoscale Fe₃O₄-assisted extracellular polymeric substances (EPS) compared to traditional EPS and its application feasibility in sulfonamide-contaminated aqueous system. This study reported eco-friendly and reusable EPS/Fe₃O₄ was applied in the sulfonamide-contaminated water treatment, including sulfamethoxazole (SMX), sulfamerazine (SM1), sulfamethazine (SM2) and sulfadiazine (SDZ), respectively. EPS/Fe₃O₄ exhibited the adsorption performance of 77.93%, 74.13%, 65.62%, and 56.64% for SMX, SM1, SM2 and SDZ, respectively, increased by 7.93%, 19.02%, 13.78% and 9.93% compared to traditional EPS. The initial pH value tuned adsorption performance via varying existing species of each sulfonamides. The adsorption process could be well fitted by Freundlich and pseudo-second-order kinetics models. Moreover, the multiple evidences from SEM, FTIR, zeta potential and XRD explained the adsorption mechanisms (i.e., chemisorption, ion exchange, hydroxyl group and hydrophobicity). Desorption and recycle adsorption experiments demonstrated the well regeneration ability of EPS/Fe₃O₄ as biosorbent (67.12% adsorption performance for SMX after five adsorption-desorption cycles), suggesting EPS/Fe₃O₄ was considered as a superior choice for sulfonamide-contaminated water treatment compared to the unrecyclable EPS.

A simple and effective synthesis of magnetic γ-Fe2O3@SiO2@TiO2-Ag microspheres as a recyclable photocatalyst: dye degradation and antibacterial potential

PURPOSE AND METHODS

In this study, an effective technique for synthesizing γ-Fe₂O₃@SiO₂@TiO₂-Ag magnetically separable photocatalyst was introduced by combining co-precipitation, sol-gel, and photo-deposition methods. A series of analyses including FTIR, SEM, EDS, XRD, and VSM were applied to characterize the prepared materials and the investigations on photocatalytic activity of the prepared composites were accomplished.

RESULTS

Compared to bare γ-Fe₂O₃@SiO₂@TiO₂, the Ag-doped composite was more active in terms of photocatalytic characteristics. By applying γ-Fe₂O₃@SiO₂@TiO₂-Ag, the decomposition rate of the Basic blue 41 reached to about 94% after 3 h of UV irradiation; this rate was 63% for pure γ-Fe₂O₃@SiO₂@TiO₂. The results indicated that the dye degradation kinetics followed first-order kinetic model. During the five cycles of separation, it was observed that the Ag-doped composite was greatly effective and stable in terms of recycling. Moreover, the results indicated that antibacterial activity of γ-Fe₂O₃@SiO₂@TiO₂-Ag was remarkably stronger than that of pure Fe₂O₃@SiO₂@TiO₂ particles.

CONCLUSION

It was concluded that by modifying magnetic TiO₂ by silver nanoparticles, charge separation was eased by catching photo-generated electrons, resulted in an enhanced photo- and biological activity. Graphical abstract.

Carbon-based magnetic nanocomposite as catalyst for persulfate activation: a critical review

The activation of persulfate to produce active radicals has been attracting wide attention in environmental remediation fields. Among various catalysts, non-metal carbocatalysts and carbon-based composites have shown attractive prospects given that they are environmental-friendly, highly efficient, abundant, and diverse. In this paper, the use of carbon-based magnetic nanocomposites as catalysts for persulfate activation was reviewed and discussed. The preparation methods of carbon-based magnetic nanocomposites were first briefly summarized. Subsequently, the use of activated carbon, carbon nanotubes, graphene oxide, biochar, and nanodiamond-based magnetic composites to activate persulfate was discussed, respectively. A synergetic effect between carbon materials and magnetic nanoparticles facilitated the activation process because of the increased electron transfer capacity, good dispersity of magnetic nanoparticles, and good repeatability and separability. Both radical and non-radical pathways were detected in the activation processes, but the specific mechanisms were greatly influenced by the components of the catalyst and solution conditions. And fundamental studies were needed to clarify the inner mechanisms of the process. In the end, strategies for enhancing the catalytic performances of carbon-based magnetic nanocomposites were suggested. It is expected that this review will provide some inspirations for developing highly efficient and green catalyst, as well as sulfate radical-based advanced oxidation technology for the remediation water environment.

Preparation and Characterization of Agar Based Magnetic Nanocomposite for Potential Biomedical Applications

PURPOSE

The purpose of the present study was to make a biocompatible agar based composite material via incorporation of appropriate additives within the agar matrix for potential applications in drug delivery and biomedical fields.

METHODOLOGY

Agar based composites were prepared by the incorporation of magnetic iron oxide nano particles, graphite and sodium aluminum as additives in different proportions within the agar matrix by a simple thermophysico- mechanical method. The as prepared agar based composites were then characterized by different techniques i.e. FTIR, SEM, TGA, XRD and EDX analyses. The FTIR peaks confirmed the presence of each component in the agar composite. SEM images showed the uniform distribution of each component in the agar composite. TGA study showed the thermal stability range of different composite sheets. XRD pattern revealed the crystallinity and EDX analysis confirmed the elemental composition of the prepared composites. The prepared agar based composites were evaluated for antimicrobial activities against three pathogenic bacterial strains Escherichia coli, Staphylococcus aureus and Klebsiella pneumonia and the result indicated efficient antimicrobial activities for all composites.

CONCLUSION

From the overall study, it was concluded that due to the non-toxic nature, thermal stability and excellent antibacterial properties, the prepared agar based composites can receive potential biomedical applications.

Hierarchically structured ternary heterojunctions based on Ce3+/ Ce4+ modified Fe3O4 nanoparticles anchored onto graphene oxide sheets as magnetic visible-light-active photocatalysts for decontamination of oxytetracycline

The main prerequisite of an active visible-light-driven photocatalyst is to effectively utilize the visible light to induce electron-hole (e^-/h⁺) pairs of expanded lifetime. To this end, for the first time, the ternary heterojunctions of CeO₂/Fe₃O₄ /Graphene oxide and Ce³⁺/ Fe₃O₄ /Graphene oxide (CeO₂/Fe₃O₄/GO and Fe_2.8Ce_0.2O₄/GO) were prepared via facile ultrasonic-assisted procedures and employed for destruction of oxytetracycline (OTC) under visible light irradiation. The changes in the relative crystal structure, morphology, atomic and surface functional group composition, magnetic, and optic properties of magnetite were uncovered by various techniques. The substantial degradation and mineralization of OTC via visible light/Fe_2.8Ce_0.2O₄/GO system were thoroughly discussed in terms of narrowed band gap energy, the principal function of Ce³⁺/Ce⁴⁺ and Fe²⁺/Fe³⁺ redox pairs and GO platelets, enhanced charge separation and transfer, and enlarged active surface area. Furthermore, the performance of visible light/Fe_2.8Ce_0.2O₄/GO system was evaluated for treating real wastewater and its efficiency was investigated using a number of enhancers and scavengers. Finally, the generated byproducts in the course of photodegradation were determined and the oxidation pathway, photocatalytic kinetics, and plausible mechanism were proposed. The results confirmed that the introduced Ce ions and graphene oxide sheets boost the photo-catalytic efficiency of magnetite for photodegradation of OTC.

Extraction of plasmid DNA by use of a magnetic maghemite-polyaniline nanocomposite

We describe the use of a hybrid magnetic nanocomposite (HMNC) for the extraction and purification of plasmid DNA (pDNA) from Escherichia coli aqueous solutions. The HMNC, which was synthesized via emulsion polymerization, was characterized by transmission electron microscopy, scanning electron microscopy, UV-Vis spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering and magnetic measurements. The results confirmed the incorporation of polyaniline (Pani) in its conducting form onto a core formed by the magnetic iron oxide, with the hybrid particles presenting an average size of (95 ± 30) nm and a saturation magnetization of 30 emu/g. The yield, purity and quality of the pDNA purified by using the Pani HMNC were evaluated by UV-Vis spectroscopy, agarose gel electrophoresis, and Polymerase Chain Reaction (PCR), respectively. An average yield of ~6.9 μg was obtained in the DNA extraction process, with the collected material presenting a good purity (a ₳260/280 ratio in the 1.68-1.82 range) and an excellent quality, as confirmed by subsequent PCR assays. Hence, this HMNC appears as a promising material for use in pDNA purification protocols, and we suggest that this novel HMNC-based methodology can be of general interest and find widespread application in different biomedical procedures.