Evaluation of potential toxic heavy metal contamination in soil, fly ash, vegetables and grain crops along with associated ecological and health risk assessment of nearby inhabitants of a thermal power station in Jharkhand (India)

Toxicity assessment of heavy metals translocation in maize grown in the Ganges delta floodplain soils around the Payra power plant in Bangladesh

As a cereal crop, maize ranked third place after wheat and rice in terms of land area coverage for its cultivation, and in Bangladesh, it ranked second place after rice in its production. As the substitution of wheat products, maize has been used widely in baking for human consumption and animal fodder. However, maize grown in this soil around the coal-burning power plant may cause heavy metals uptake that poses a risk to humans. The study was conducted at the maize fields in the Ganges delta floodplain soils of Bangladesh to know the concentration of eight heavy metals (Ni, Cr, Cd, Mn, As, Cu, Zn, and Pb) in soil and maize samples using an inductively coupled plasma mass spectrometer (ICP-MS) and to estimate the risk of heavy metals in maize grains. Mean concentrations of heavy metals (mg/kg) in soil were in decreasing order of Zn (10.12) > Cu (10.02) > Mn (5.48) > Ni (4.95) > Cr (3.72) > As (0.51) > Pb (0.27) > Cd (0.23). The plant tissues showed the descending order of heavy metal concentration as roots > grains > stems > leaves. BCF values for As, Cd, Pb, and Mn in roots were higher than 1.0, indicating considerable accumulation of these elements in maize via roots. Total hazard quotient (ƩTHQ) of heavy metals through maize grain consumption was 3.7E+00 and 3.9E+00 for adults and children, respectively, indicating non-cancer risk to the consumers. Anthropogenic influences contributed to the heavy metals enrichment in the Ganges delta floodplain soils around the thermal plant, and potential risks (non-carcinogenic and carcinogenic) were observed due to the consumption of maize grain cultivated in the study area.

Modern perspectives of heavy metals alleviation from oil contaminated soil: A review

Heavy metal poisoning of soil from oil spills causes serious environmental problems worldwide. Various causes and effects of heavy metal pollution in the soil environment are discussed in this article. In addition, this study explores new approaches to cleaning up soil that has been contaminated with heavy metals as a result of oil spills. Furthermore, it provides a thorough analysis of recent developments in remediation methods, such as novel nano-based approaches, chemical amendments, bioremediation, and phytoremediation. The objective of this review is to provide a comprehensive overview of the removal of heavy metals from oil-contaminated soils. This review emphasizes on the integration of various approaches and the development of hybrid approaches that combine various remediation techniques in a synergistic way to improve sustainability and efficacy. The study places a strong emphasis on each remediation strategy that can be applied in the real-world circumstances while critically evaluating its effectiveness, drawbacks, and environmental repercussions. Additionally, it discusses the processes that reduce heavy metal toxicity and improve soil health, taking into account elements like interactions between plants and microbes, bioavailability, and pollutant uptake pathways. Furthermore, the current study suggests that more research and development is needed in this area, particularly to overcome current barriers, improve our understanding of underlying mechanisms, and investigate cutting-edge ideas that have the potential to completely transform the heavy metal clean up industry.

Evaluation of energy potential of MSW in the Tamale metropolis, Ghana: An assessment of solid waste characteristics and energy content

In the present investigation, a thorough examination of waste composition was undertaken in the Tamale Metropolis, Ghana. The methodology employed was carefully designed, incorporating both commercial and residential sectors as well as various socioeconomic classes. Source-based sampling of waste materials covered a range of locations, including households, markets, hotels, and restaurants, while socioeconomic-based categorization followed the zoning of the metropolis. Waste audit sampling involved collecting a total of 90 batches of solid waste over the three-month period from August to October 2023. The primary objectives were to physically characterize the waste and evaluate its chemical properties through proximate and ultimate analysis of waste fractions, aiming to determine the waste-to-energy potential and compatibility with waste-to-energy technologies. The study revealed that the Tamale Metropolis generates 176.1 tons/day of Municipal Solid Waste (MSW) at a rate of 0.47 kg/capita/day.Organic matter constituted the majority (44.9%), followed by inert, miscellaneous, and plastic waste at 20% each. The remaining 14.3% comprised paper, metal, glass, leather, and textile components. Notably, the hospitality sector exhibited the highest organic matter content at 62.3%, contrasting with average households and markets at 44.9% and 13.1%, respectively. Moisture content ranged from 5.4% to 12.6%, volatile solids from 21.8% to 77.2%, and gross calorific values from 7.9 MJ/kg to 28.9 MJ/kg. Household waste demonstrated the highest energy content at 6693.8 kcal/kg, followed by hotels/restaurants (2003.94 kcal/kg) and markets (1883.62 kcal/kg). This study's findings offer valuable insights that can inform the development of effective policies by regulatory bodies such as the Public Utility Regulatory Commission (PURC) and the Ghana Ministry of Energy, as well as city authorities like the Tamale Metropolitan Assembly and the Environmental Protection Agency. These insights can be used to address waste and energy challenges in the metropolis.Implications: The findings reveal critical insights with substantial implications for stakeholders and regulatory bodies. It emphasizes the waste-to-energy potential of various waste fractions, highlighting the need for sustainable municipal waste management strategies. Particularly, the high organic content in the hospitality sector presents significant energy recovery opportunities. For bodies like the Public Utility Regulatory Commission and the Ghana Ministry of Energy, this data is crucial for developing policies that support waste-to-energy technologies. Additionally, the Tamale Metropolitan Assembly and the Environmental Protection Agency can use these insights to improve local waste management practices, customizing interventions to address specific sectoral waste composition. The study also underlines the importance of ongoing monitoring to ensure the effectiveness of these strategies over time.

Comparative assessment of pantothenic, aspartic, ascorbic and tartaric acids assisted Pb-phytoextraction by sunflower (Helianthus annuus L.)

Phytoextraction of lead (Pb) is a challenging task due to its extremely low mobility within soil and plant systems. In this study, we tested the influence of some novel chelating agents for Pb-phytoextraction using sunflower. The Pb was applied at control (0.0278 mM) and 4.826 mM Pb as Pb(NO3)2 through soil-spiking. After 10 days of Pb addition, four different organic ligands (aspartic, ascorbic, tartaric, and pantothenic acids) were added to the soil at 1 mM concentration each. respectively. In the absence of any chelate, sunflower plants grown at 4.826 mM Pb level accumulated Pb concentrations up to 104 µg g-1 DW in roots, whereas 64 µg g-1 DW in shoot. By contrast, tartaric acid promoted significantly Pb accumulation in roots (191 µg g-1 DW; + 45.5%) and shoot (131.6 µg g-1 DW; + 51.3%). Pantothenic acid also resulted in a significant Pb-uptake in the sunflower shoots (123 µg g-1 DW; + 47.9%) and in roots (177.3 µg g-1 DW; + 41.3%). The least effective amongst the chelates tested was aspartic acid, but it still contributed to + 40.1% more Pb accumulation in the sunflower root and shoots. In addition, plant growth, biochemical, and ionomic parameters were positively regulated by the organic chelates used. Especially, an increase in leaf Ca, P, and S was evident in Pb-stressed plants in response to chelates. These results highlight that the use of biocompatible organic chelates positively alters plant physio-biochemical traits contributing to higher Pb-sequestration in sunflower plant parts.

Elevated Uptake and Translocation Patterns of Heavy Metals in Different Food Plants Parts and Their Impacts on Human Health

Irrigation with contaminated wastewater is a common practice in cultivation of crops and vegetables in many developing countries due to the scarcity of available fresh water. The present study has investigated the transfer and mobilization trends of heavy metals in different crops and vegetables plants grown in contaminated soil and waterbody. The translocation patterns of metals from polluted sources into different organs of plants bodies such as roots and edible parts and associated health risks have been evaluated simultaneously. Total of 180 different environmental samples including food plants, agricultural soil, and irrigation water were collected and analyzed. Heavy metal concentrations (Fe, Ni, Mn, Pb, Cu, Cd, As) in water, soil, and different parts of crops and vegetable plants were compared with the permissible levels reported by FAO/WHO, EU, and USEPA. Different metals contents within the food plants were found to be in the order of Fe > Mn > Ni > Cu > Pb > Cd > As. Pollution load index (PLI) data indicate that soil is highly polluted with Cd as well as moderately contaminated by As and Cu. Bioconcentration factor (BCF) analysis showed excessive accumulation of some heavy metals in crops and vegetables. Target hazard quotient (THQ) and target carcinogenic risk (TCR) analysis data showed higher carcinogenic and non-carcinogenic risks for both adult and children from the consumption of metal-contaminated food items. The results of metal pollution index (MPI), estimated daily intake (EDI), and hazard index (HI) analyses demonstrated the patterns of metals pollution in different food plants.

Concentration, speciation and risk effects of multiple environmentally sensitive trace elements in respirable fine-grained fly ash

Respirable fine-grained fly ash (RFA) is captured very inefficiently by existing air purification devices of power plant, leading to increasing concerns regarding their migration and subsequent interaction with body due to fine particle size and its complex toxic composition. Trace elements of RFA in three groups with five different sizes between 8-13 µm were analyzed in terms of available concentration, speciation and risk effects. The concentration, pollution level and ecological risk level of elements in RFA were related to particle sizes. Chronic non-carcinogenic effect risk (NER) and carcinogenic effect risk (CER) were negatively correlated with particle size. The individual weight of exposed subjects, corresponding trace elements concentration and ingestion rate in RFA were three significant variables influencing CER. NER and CER had a tenfold exaggerated effect when calculated using total element concentration of RFA. In addition to individual differences and exposure conditions, trace element properties, speciation and available concentration were the dominant factor responsible for ecological and environmental effects of trace elements in RFA, following the order As>Ni, Mn>Cr>Pb>Cu>Zn. Results of this work highlight the effects and differences of trace elements in RFA on ecology and health, and provide a basis for further pollution control and human health warning.

Superabsorbent hydrogels based on natural polysaccharides: Classification, synthesis, physicochemical properties, and agronomic efficacy under abiotic stress conditions: A review

Superabsorbent polymers (SAPs) are a class of polymers that have attracted tremendous interest due to their multifunctional properties and wide range of applications. The importance of this class of polymers is highlighted by the large number of publications, including articles and patents, dealing with the use of SAPs for various applications. Within this framework, this review provides an overview of SAPs and highlights various key aspects, such as their history, classification, and preparation methods, including those related to chemically or physically cross-linked networks, as well as key factors affecting their performance in terms of water absorption and storage. This review also examines the potential use of polysaccharides-based SAPs in agriculture as soil conditioners or slow-release fertilizers. The basic aspects of SAPs, and methods of chemical modification of polysaccharides are presented and guidelines for the preparation of hydrogels are given. The water retention and swelling mechanisms are discussed in light of some mathematical empirical models. The nutrient slow-release kinetics of nutrient-rich SAPs are also examined on the basic of commonly used mathematical models. Some examples illustrating the advantages of using SAPs in agriculture as soil conditioners and agrochemical carriers to improve crop growth and productivity are presented and discussed. This review also attempts to provide an overview of the role of SAPs in mitigating the adverse effects of various abiotic stresses, such as heavy metals, salinity, and drought, and outlines future trends and prospects.

Green synthesis of silver nanoparticles and its environmental sensor ability to some heavy metals

This study marks a pioneering effort in utilizing Vachellia tortilis subsp. raddiana (Savi) Kyal. & Boatwr., (commonly known as acacia raddiana) leaves as both a reducing and stabilizing agent in the green "eco-friendly" synthesis of silver nanoparticles (AgNPs). The research aimed to optimize the AgNPs synthesis process by investigating the influence of pH, temperature, extract volume, and contact time on both the reaction rate and the resulting AgNPs' morphology as well as discuss the potential of AgNPs in detecting some heavy metals. Various characterization methods, such as UV-vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR), Zeta sizer, EDAX, and transmitting electron microscopy (TEM), were used to thoroughly analyze the properties of the synthesized AgNPs. The XRD results verified the successful production of AgNPs with a crystallite size between 20 to 30 nm. SEM and TEM analyses revealed that the AgNPs are primarily spherical and rod-shaped, with sizes ranging from 8 to 41 nm. Significantly, the synthesis rate of AgNPs was notably higher in basic conditions (pH 10) at 70 °C. These results underscore the effectiveness of acacia raddiana as a source for sustainable AgNPs synthesis. The study also examined the AgNPs' ability to detect various heavy metal ions colorimetrically, including Hg2+, Cu2+, Pb2+, and Co2+. UV-Vis spectroscopy proved useful for this purpose. The color of AgNPs shifts from brownish-yellow to pale yellow, colorless, pale red, and reddish yellow when detecting Cu2+, Hg2+, Co2+, and Pb2+ ions, respectively. This change results in an alteration of the AgNPs' absorbance band, vanishing with Hg2+ and shifting from 423 to 352 nm, 438 nm, and 429 nm for Cu2+, Co2+, and Pb2+ ions, respectively. The AgNPs showed high sensitivity, with detection limits of 1.322 × 10-5 M, 1.37 × 10-7 M, 1.63 × 10-5 M, and 1.34 × 10-4 M for Hg2+, Cu2+, Pb2+, and Co2+, respectively. This study highlights the potential of using acacia raddiana for the eco-friendly synthesis of AgNPs and their effectiveness as environmental sensors for heavy metals, showcasing strong capabilities in colorimetric detection.

Accumulation, potential risk and source identification of toxic metal elements in soil: a case study of a coal-fired power plant in Western China

Coal-fired power plants (CPP) usually release massive numerous amounts of potentially toxic metal(loid)s (PTMs) into nearby ecosystems. There have been relatively few studies targeted on the ecological influences of PTMs related to the CPP in arid area. In this work, the distribution pattern, source apportionment and environmental risks of As, Cd, Cr, Hg, Pb and a couple of seldom monitored PTMs (Se, Zn, Co, Cu, Fe, Mn and Ni) in the soils near a coal electricity integration base were investigated in Hami, a city in northwestern China. Nemerow synthesis pollution index, geo-accumulation index and ecological risk index were used to assess pollution state of these PTMs in soils, and ordinary Kriging interpolation was used to analyze the spatial distribution for these elements. Methods of CA, PCA, CA and PAM were carried out for quantitative source analysis. The research outcome includes: (1) the contents of individual PTMs in most samples were greater than the background values, the pollution degrees of Se, Pb, Hg, Cd and As were significant, and some areas exceeded the warning threshold value; (2) the main sources of these PTMs were natural sources (35%), coal mine sewage (11%), atmospheric release during coal combustion (21%), dust generated from coal and combustion products (33%); (3) attention should be paid to the open-pit coal mines, shaft coal mines and ash dumps where the contents of metal elements were significantly polluted; and (4) wind is the main driving forces of PTMs migration in arid areas.

Essential role of multi-element data in interpreting elevated element concentrations in areas impacted by both natural and anthropogenic influences

Background

This article presents a detailed analysis of a dataset consisting of 27 elements found in soils, soil eluates, and vegetables from private gardens in a region with a long history of coal mining and burning. With coal being one of the world's most significant energy sources, and previous studies highlighting elevated element levels in vegetables from this region, the objective of this study was to identify the factors that impact soil geochemistry and metal(loid) uptake in plants.

Methods

Total major and trace element concentrations were analyzed in soils, soil eluates and vegetables by high resolution inductively coupled plasma mass spectrometry. The vegetable samples included six species: fennel, garlic, lettuce, parsley, onion, and radicchio. Each plant was divided into roots, stems, leaves, and/or bulbs and analyzed separately. In addition, the soil pollution status, bioavailable fractions and transfer factors from soil and soil eluates to different plant parts were determined.

Results

The comprehensive dataset revealed that, apart from the substrate enriched with various elements (Al, As, Co, Cr, Mo, Ni, Pb, Sb, Sn, Ti, U, V, and Zn), other anthropogenic factors such as the legacy of coal mining and combustion activities, associated industries in the area, transport, and agricultural practices, also influence the elevated element concentrations (Cd, Cu, Fe, Mn, and Se) in locally grown vegetables. The transfer factors based on element concentrations in aqueous soil eluates and element bioavailable fractions confirmed to be an effective tool for evaluating metal uptake in plants, emphazising to some extent the effects of plant species and revealing unique patterns for each pollution source within its environmental context (e.g., Cd, Mo, S, and Se in this case). The study highlights the crucial importance of utilizing comprehensive datasets that encompass a multitude of factors when interpreting the impacts of element uptake in edible plants.

Arbuscular mycorrhizas amplify the risk of heavy metal transfer to human food chain from fly ash ameliorated agricultural soils

Soil contaminants threaten global food security by posing threats to food safety through food chain pollution. Fly ash is a potential agent of soil contamination that contains heavy metals and hazardous pollutants. However, being rich in macro- and micronutrients that have direct beneficial effects on plant growth, fly ash has been recommended as a low-cost soil ameliorant in agriculture in countries of the Global South. Arbuscular mycorrhizal fungi (AMF), ubiquitous in agricultural soils, enhance efficiency of plant nutrient uptake from soils but can equally increase uptake of toxic pollutants from fly ash ameliorated soils to edible crop tissues. We investigated AMF-mediated amplification of nutrient and heavy metal uptake from fly ash amended soils to shoots, roots and grains of barley. We used a microcosm-based experiment to analyse the impacts of fly ash amendments to soil in concentrations of 0 (control), 15, 30 or 50% respectively, on root colonization by AMF Rhizophagus irregularis and AMF-mediated transfer of N, P and heavy metals: Ni, Co, Pb and Cr to barley tissues. These concentrations of fly ash are equivalent to 0, 137, 275 and 458 t ha^-1 respectively, in soil. Root AMF colonization correlated negatively with fly ash concentration and was not detected at 50% fly ash amendment. Shoots, roots and grains of mycorrhizal barley grown with 15, 30 and 50% fly ash amendments had significantly higher concentrations of Ni, Co, Pb and Cr compared to the control and their respective non-mycorrhizal counterparts. Presence of heavy metals in barley plants grown with fly ash amended soil and their increased AMF-mediated translocation to edible grains may significantly enhance the volume of heavy metals entering the human food chain. We recommend careful assessment of manipulation of agricultural soils with fly ash as heavy metal accumulation in agricultural soils and human tissues may cause irreversible damage.

Potential Mechanism of Long-Term Immobilization of Pb/Cd by Layered Double Hydroxide Doped Chicken-Manure Biochar

Layered double hydroxide (LDH)-doped chicken-manure biochar (CMB) with long-term stability was synthesized to immobilize Pb/Cd. MgAl-Cl-LDH-doped CMB (MHs) showed prominent long-term oxidation resistance and the least biodegradation sensitivity. Efficient Pb/Cd adsorption was observed on MHs, and the maximum adsorption capacities of Pb(II)/Cd(II) reached 1.95 mmol/g and 0.65 mmol/g, respectively. Precipitation and isomorphous substitution were identified as the key adsorption mechanisms, which formed highly stable Pb/Cd species (PbAl-CO₃-LDH, Pb₃(OH)₂CO₃, CdAl-Cl-LDH and CdCO₃). Pb(II) and Cd(II) precipitated with CO₃^2- in MHs; meanwhile, Mg(II) and Ca(II) in LDH layers were substituted by Pb(II) and Cd(II) respectively. Therefore, MHs had the potential for long-term stability of Pb/Cd. Moreover, complexation and electrostatic adsorption also contributed to the Pb/Cd immobilization to a certain extent. When 5% MHs (w/w) was applied to Pb/Cd contaminated smelting site soils, the soil pH increased from 5.9 to 7.3. After applying MHs for 25 d, the content of bioavailable Pb(II) and Cd(II) decreased by 98.8% and 85.2%, respectively, and the content of soluble Pb and Cd dropped by 99.5% and 96.7%. This study paves the way for designing a novel LDH doped CMB as efficient Pb/Cd immobilizers for smelting site soils.