Mining tailings and alkali activation: a comprehensive bibliometric review

Long-term performance: strength and metal encapsulation in alkali-activated iron ore tailings

Understanding the strength behavior and leaching characteristics of mining tailings stabilized with alkali-activated cements in the short, medium, and long term is crucial for the feasibility of material applications. In this context, this study assessed the stabilization/solidification of iron ore tailings (IOT) using alkali-activated binder (AAB) composed of sugarcane bagasse ash and eggshell lime at curing times of 7, 28, 60, 90, 180, and 365 days. Additionally, leaching tests were conducted, along with the examination of possible changes in the chemical and mineralogical composition resulting from exposure to acidic environments. Tests included unconfined compression strength (UCS), leaching, X-ray diffraction, and Fourier-transform infrared spectroscopy for the IOT-AAB mixtures. The highest increase in UCS was observed between 7 and 60 days, reaching 6.47 MPa, with minimal variation thereafter. The AAB-bonded IOT exhibited no metal toxicity over time. Elements Ba, Mn, Pb, and Zn present in IOT and ash were encapsulated in the cemented matrix, with complete encapsulation of all metals observed from 90 days of curing time. The mineralogy of the stabilized/solidified tailings showed no changes resulting from leaching tests. Characteristic bands associated with the presence of N-A-S-H gel were identified in both pre-leaching and post-leaching samples for all curing times analyzed. Exposure to acidic environments altered bands related to carbonate bonds formed in the IOT-AAB mixture.

Effect of phosphogypsum adding on setting kinetics and mechanical strength of geopolymers based on metakaolin or fly ash matrices

Our study aims to highlight the effects of the addition of phosphogypsum on certain fresh and hardened characteristics of geopolymer matrices based on metakaolin or fly ash. In the fresh state, workability and setting were studied by rheology and by the electrical conductivity measurement. The hardened state was characterized by XRD, DTA, SEM, and compressive strength measurement. Workability investigations reveal that the addition of phosphogypsum increases the viscosity, which limited the phosphogypsum addition rate to 15 wt% for metakaolin-based matrices and 12 wt% for fly ash-based matrices, with a setting retarding effect in both cases. Analyses of the matrices show dissolution of gypsum along with formation of sodium sulfate and calcium silicate hydrate. Moreover, the introduction of phosphogypsum to these matrices up to a mass rate of 6% has no significant effect on the mechanical strength. Beyond that rate, the compressive strength drops from a value of 55 MPa for the matrices without addition down to 35 MPa and 25 MPa when the addition rate is 12 wt% for the metakaolin-based and fly ash-based matrix, respectively. This degradation seems to be due to the increase in porosity created by addition of phosphogypsum.