Face masks: a COVID-19 protector or environmental contaminant?

Effects of COVID-19 on coastal and marine environments: Aggravated microplastic pollution, improved air quality, and future perspective

The COVID-19 pandemic during 2020-2023 has wrought adverse impacts on coastal and marine environments. This study conducts a comprehensive review of the collateral effects of COVID-19 on these ecosystems through literature review and bibliometric analysis. According to the output and citation analysis of these publications, researchers from the coastal countries in Asia, Europe, and America payed more attentions to this environmental issue than other continents. Specifically, India, China, and USA were the top three countries in the publications, with the proportion of 19.55%, 18.99%, and 12.01%, respectively. The COVID-19 pandemic significantly aggravated the plastic and microplastic pollution in coastal and marine environments by explosive production and unproper management of personal protective equipment (PPE). During the pandemic, the estimated mismanaged PPE waste ranged from 16.50 t/yr in Sweden to 250,371.39 t/yr in Indonesia. In addition, the PPE density ranged from 1.13 × 10-5 item/m2 to 2.79 item/m2 in the coastal regions worldwide, showing significant geographical variations. Besides, the emerging contaminants released from PPE into the coastal and marine environments cannot be neglected. The positive influence was that the COVID-19 lockdown worldwide reduced the release of air pollutants (e.g., fine particulate matter, NO2, CO, and SO2) and improved the air quality. The study also analyzed the relationships between sustainable development goals (SDGs) and the publications and revealed the dynamic changes of SDGs in different periods the COVID-19 pandemic. In conclusion, the air was cleaner due to the lockdown, but the coastal and marine contamination of plastic, microplastic, and emerging contaminants got worse during the COVID-19 pandemic. Last but not least, the study proposed four strategies to deal with the coastal and marine pollution caused by COVID-19, which were regular marine monitoring, performance of risk assessment, effective regulation of plastic wastes, and close international cooperation.

Mechanical upcycling of single-use face mask waste into high-performance composites: An ecofriendly approach with cost-benefit analysis

The COVID-19 pandemic created an unprecedented demand for PPE, with single-use face masks emerging as a critical tool in containing virus transmission. However, the extensive use and improper disposal of these single-use face masks, predominantly composed of non-biodegradable plastics, has exacerbated environmental challenges. This research presents an innovative method for mechanically upcycling PPEs used in medical sectors i.e. single use face masks. The study investigates a facile approach for reclamation of infection-free and pure polypropylene (PP) plastic from discarded single use face masks (W-PP) and blends it with various vegetable oil percentages (5, 10 and 20 %), resulting in a versatile material suitable for various applications. Melt flow index, rheological behaviour, DSC and FTIR were employed to investigate the effect of vegetable oil/radical initiator through chemical grafting on W-PP properties. The results demonstrate significant enhancements in the tensile strength and modulus of W-PP when blended with vegetable oil and a radical initiator. There was a marked increase in tensile strength (33 %) and strain (55 %) compared to untreated W-PP, rendering W-PP both robust and flexible. Furthermore, we employed this upcycled W-PP in the fabrication of glass fibre-reinforced composites, resulting in notable enhancements in both tensile strength and impact resistance. The upcycled W-PP demonstrates excellent potential for various applications, such as sheet forming and 3D printing, where the non-brittleness of plastics plays a pivotal role in manufacturing high-quality products. The cost-benefit analysis of this approach underscores the potential of upcycling PPE waste as a sustainable solution to mitigate plastic pollution and conserve valuable resources. The applications of this upcycled material span a wide range of industries, including automotive composites, packaging, and 3D printing.

Fabrication of Poly(Lactic Acid)@TiO2 Electrospun Membrane Decorated with Metal-Organic Frameworks for Efficient Air Filtration and Bacteriostasis

The development of high-performance filtration materials is essential for the effective removal of airborne particles, and metal-organic frameworks (MOFs) anchored to organic polymer matrices are considered to be one of the most promising porous adsorbents for air pollutants. Nowadays, most air filters are generally based on synthetic fiber polymers derived from petroleum residues and have limited functionality, so the use of MOFs in combination with nanofiber air filters has received a lot of attention. Here, a conjugated electrostatic spinning method is demonstrated for the one-step preparation of poly(lactic acid) (PLA) nanofibrous membranes with a bimodal diameter distribution and the anchoring of Zeolitic Imidazolate Framework-8 (ZIF-8) by the introduction of TiO2 and in situ generation to construct favorable multiscale fibers and rough structures. The prepared PLA/TZ maintained a good PM2.5 capture efficiency of 99.97%, a filtration efficiency of 96.43% for PM0.3, and a pressure drop of 96.0 Pa, with the highest quality factor being 0.08449 Pa-1. Additionally, ZIF-8 was uniformly generated on the surface of PLA and TiO2 nanofibers, obtaining a roughened structure and a larger specific surface area. An enhanced filtration retention effect and electrostatic interactions, as well as active free radicals, can be generated for the deep inactivation of bacteria. Compared with the unmodified membrane, PLA/TZ prepared antibacterial characteristics induced by photocatalysis and Zn2+ release, with excellent bactericidal effects against S. aureus and E. coli. Overall, this work may provide a promising approach for the development of efficient biomass-based filtration materials with antimicrobial properties.