Reductive immobilization of Re(VII) by graphene modified nanoscale zero-valent iron particles using a plasma technique

Efficient removal of perrhenate/pertechnetate by a pyridinium-based porous polymer

The extraction of 99TcO4- from radioactive effluents is extremely crucial for the purposes of nuclear disposal and environmental remediation. Herein, utilizing a facile and low-cost synthesis method, we report a pyridinium-based cationic polymer network, CPP-Cl, with impressive adsorption performance and ultrafast adsorption kinetics towards ReO4-. The structure featuring highly density of charged pyridinium units was synthesized, making it an effective adsorbent for capturing ReO4-. The material showed fast ReO4- adsorption kinetics reaching adsorption equilibrium within 30 s, an excellent capture capability of 1069.7 mg/g, and exceptional separation efficiency of 94.3% for removing 1000 ppm ReO4-. Furthermore, it possessed excellent reusability in multiple sorption/desorption trials and good uptake capacity within a widely ranging pH values. It is noteworthy that the extraction efficiency of CPP-Cl for ReO4- from simulated nuclear waste can be up to 94.2%. The favorable performance of the material in multiple tests revealed that CPP-Cl has tremendous potential as a high-efficiency sorbent for capturing 99TcO4-/ReO4- in complex nuclear associated environmental systems.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Removal of radionuclide 99Tc from aqueous solution by various adsorbents: A review

Technetium isotope 99Tc is a main radioactive waste produced in the process of nuclear reaction, which has the characteristics of long half-life and strong environmental mobility, and can be bio-accumulated in organisms, resulting in serious threat to human health and ecosystem. Adsorption method is widely used in the field of removing radionuclides from water due to the advantages of high treatment rate, simple and mature industrial application. In this review paper, the recent advances in research and application of various adsorption materials for 99Tc pollution treatment were summarized and analyzed for the first time, including inorganic adsorbents, such as activated carbon, zero-valent iron, metallic minerals, clay minerals, layered double hydroxides (LDHs), tin-based materials, and sulfur-based materials; organic adsorbents, such as porous organic polymers (POPs), covalent-organic frameworks (COFs), metal-organic frameworks (MOFs), and ion exchange resin; and biological adsorbents, such as biopolymers (chitosan, cellulose, alginate), and microbial cells. The performance characteristics and the adsorption kinetics and isotherms of various adsorption materials were discussed. This review could deepen the understanding of the adsorptive removal of 99Tc from aqueous solution, and provide a reference for the future research in this field.

Selective scandium ion capture through coordination templating in a covalent organic framework

The use of coordination complexes within covalent organic frameworks can significantly diversify the structures and properties of this class of materials. Here we combined coordination chemistry and reticular chemistry by preparing frameworks that consist of a ditopic (p-phenylenediamine) and mixed tritopic moieties-an organic ligand and a scandium coordination complex of similar sizes and geometries, both bearing terminal phenylamine groups. Changing the ratio of organic ligand to scandium complex enabled the preparation of a series of crystalline covalent organic frameworks with tunable levels of scandium incorporation. Removal of scandium from the material with the highest metal content subsequently resulted in a 'metal-imprinted' covalent organic framework that exhibits a high affinity and capacity for Sc3+ ions in acidic environments and in the presence of competing metal ions. In particular, the selectivity of this framework for Sc3+ over common impurity ions such as La3+ and Fe3+ surpasses that of existing scandium adsorbents.

Design and Application of Materials for Sequestration and Immobilization of 99Tc

⁹⁹Technetium (⁹⁹Tc) is a hazardous radionuclide that poses a serious environmental threat. The wide variation and complex chemistries of liquid nuclear waste streams containing ⁹⁹Tc often create unique, site specific challenges when sequestering and immobilizing the waste in a matrix suitable for long-term storage and disposal. Therefore, an effective management plan for ⁹⁹Tc containing liquid radioactive wastes (such as storage (tanks) and decommissioned wastes) will likely require a variety of suitable materials/matrixes capable of adapting to and addressing these challenges. In this review, we discuss and highlight the key developments for effective removal and immobilization of ⁹⁹Tc liquid waste in inorganic waste forms. Specifically, we review the synthesis, characterization, and application of materials for the targeted removal of ⁹⁹Tc from (simulated) waste solutions under various experimental conditions. These materials include (i) layered double hydroxides (LDHs), (ii) metal-organic frameworks (MOFs), (iii) ion-exchange resins (IERs) as well as cationic organic polymers (COPs), (iv) surface modified natural clay materials (SMCMs), and (v) graphene-based materials (GBMs). Second, we discuss some of the major and recent developments toward ⁹⁹Tc immobilization in (i) glass, (ii) cement, and (iii) iron mineral waste forms. Finally, we present future challenges that need to be addressed for the design, synthesis, and selection of suitable matrixes for the efficient sequestration and immobilization of ⁹⁹Tc from targeted wastes. The purpose of this review is to inspire research on the design and application of various suitable materials/matrixes for selective removal of ⁹⁹Tc present globally in different radioactive wastes and its immobilization in stable/durable waste forms.

Constructing Cationic Metal-Organic Framework Materials Based on Pyrimidyl as a Functional Group for Perrhenate/Pertechnetate Sorption

Cationic metal-organic framework (MOF) materials are widely used in the anion separation field, but there are few reports of pyrimidyl ligands as building units. In this work, three new cationic MOFs based on pyrimidyl as functional group ligands were synthesized for the removal of radioactive pertechnetate from aqueous solution. The pyrimidyl ligands were designed by incorporating pyrimidyl units into the skeletons of benzene, triphenylamine, and tetraphenylethylene, respectively. Taking advantage of multiple coordination sites of pyrimidyl groups, three cationic MOFs (ZJU-X11, ZJU-X12, and ZJU-X13) with diverse structures were solvothermally synthesized using silver ion as the metal node. Scanning electron microscopy-energy-dispersive spectroscopy mapping demonstrated that these three cationic MOFs could capture ReO₄^- via anion exchange, but the sorption capabilities were distinctly different. With 95% removal toward ReO₄^-, ZJU-X11 showed the strongest anion-exchange competence among the three MOFs. According to the results of batch experiments, ZJU-X11 could achieve sorption equilibrium within 10 min, remove 518 mg of ReO₄^- per 1 g of ZJU-X11, remove most of ReO₄^- after four recycles, and maintain satisfactory selectivity in the presence of excess competing anions, which is one of the best MOF materials for removing ReO₄^-/TcO₄^- among the three cationic MOFs. This work indicates that the pyrimidyl group is a promising multiple site to build versatile cationic MOFs.

High-performance removal of radionuclides by porous organic frameworks from the aquatic environment: A review

Dealing with unwanted nuclear waste is still a serious issue from the point of view of humans and the environment because of its harmful and dangerous effects. Recently, porous organic frameworks (POFs) have gained an increasing concern as effective materials in the removal of various types of hazardous metal ions, especially radioactive metal ions. POFs are a unique class that included covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) with strong covalent bonds, large surface area, high adsorption capacity, tunable porosity, and a porous structure with more efficient than conventional adsorbents. This review highlights the recent developments of POFs for the rapid elimination of radionuclide. The unique characteristics, adsorption properties, and interaction mechanisms between radioactive metal ions and the POF-based materials are summarized. Also, prospects for enhancing the performance of POFs to capture radioactive metal ions are discussed.

Removal of organic compounds by nanoscale zero-valent iron and its composites

During the latest several decades, the continuous development of the economy and industry has brought more and more serious organic pollutants to the natural environment, which have inevitably aroused severe menace to human health and the environmental system. The nano zero-valent iron (NZVI) particles and NZVI-based materials have widely applied to remove organic pollutants. This article reviews the key advancements of different methods for the synthesis of NZVI and NZVI-based materials. Different modification methods (e.g., doped NZVI, encapsulated NZVI and supported NZVI) are also introduced detailedly for overcoming the defects of NZVI such as aggregation and easy oxidation. The removal of different organic pollutants including dyes, halogenated organic compounds, nitro-organic compounds, phenolic compounds, pesticides, and antibiotics are summarized. The interaction mechanisms, including adsorption, reduction, and active oxidation of organic pollutants by NZVI/NZVI-based composites, are discussed. The dyes are mainly removed by destroying their chromogenic group according to the reduction or the Fenton-like reaction with NZVI. The removal of halogenated organic compounds (HOCs) is realized by the dehalogenation process, including reductive elimination, hydrogenolysis, and hydrogenation. As for the nitro-organic compounds, three different reduction pathways as nitro-reduction (into amino), cleavage at the carbon‑nitrogen bond or denitration of the NO₂ group may take effect. The phenolic compounds can be mineralized into inorganic molecules, including CO₂ and H₂O, by Fenton oxidation. This review might provide the basis for future studies on developing more effective NZVI-based materials for the treatment of wastewaters contaminated by organic pollutants.

Task-Specific Tailored Cationic Polymeric Network with High Base-Resistance for Unprecedented 99TcO4 - Cleanup from Alkaline Nuclear Waste

Direct removal of 99TcO4 - from alkaline nuclear waste is desirable because of the nuclear waste management and environmental protection relevant to nuclear energy but is yet to be achieved given that combined features of decent base-resistance and high uptake selectivity toward anions with low charge density have not been integrated into a single anion-exchange material. Herein, we proposed a strategy overcoming these challenges by rationally modifying the imidazolium unit of a cationic polymeric network (SCU-CPN-4) with bulky alkyl groups avoiding its ring-opening reaction induced by OH- because of the steric hindrance effect. This significantly improves not only the base-resistance but also the affinity toward TcO4 - as a result of enhanced hydrophobicity, compared to other existing anion-exchange materials. More importantly, SCU-CPN-4 exhibits record high uptake selectivity, fast sorption kinetics, sufficient robustness, and promising reusability for removing 99TcO4 - from the simulated high-level waste stream at the U.S. Savannah River Site, a typical alkaline nuclear waste, in both batch experiment and dynamic column separation test for the first time.

99TcO4- Separation through Selective Crystallization Assisted by Polydentate Benzene-Aminoguanidinium Ligands

⁹⁹Tc is one of the most abundant radiotoxic isotopes in used nuclear fuel with a high fission yield and a long half-life. Effective removal of pertechnetate (TcO₄^-) from an aqueous solution is important for nuclear waste separation and remediation. Herein, we report a series of facilely obtained benzene-linked guanidiniums that could precipitate TcO₄^- and its nonradioactive surrogate ReO₄^- from a high-concentration acidic solution through self-assembly crystallization. The resulting perrhenate and pertechnetate solids exhibit exceptionally low aqueous solubility. The benzene-linked guanidiniums hold one of the highest TcO₄^- removal capacities (1279 mg g^-1) among previously reported materials and possess a removal percentage of 59% for ReO₄^- in the presence of Cl^- over 50 times. The crystallization mechanism was clearly illustrated by the single-crystal structures and density functional theory calculations, indicating that TcO₄^- is captured through a charge-assisted hydrogen bonding interaction and stabilized by π-π stacking layers. In addition, the removal process is easily recycled and no toxic organic reagents are introduced. This work provides a green approach to preliminarily separate TcO₄^- from high-level nuclear wastes.

Does soluble starch improve the removal of Cr(VI) by nZVI loaded on biochar?

A novel material that nano zero valent iron (nZVI) loaded on biochar with stable starch stabilization (nZVI/SS/BC) was synthesized and used for the removal of hexavalent chromium [Cr(VI)] in simulated wastewater. It was indicated that as the pyrolysis temperature of rice straw increased, the removal rate of Cr(VI) by nZVI/SS/BC first increased and then decreased. nZVI/SS/BC made from biochar pyrolyzed at 600 °C (nZVI/SS/BC600) had the highest removal efficiency and was suitable for a wide pH range (pH 2.1-10.0). The results showed that 99.67% of Cr(VI) was removed by nZVI/SS/BC600, an increase of 45.93% compared to the control group, which did not add soluble starch during synthesis. The pseudo-second-order model and the Langmuir model were more in line with reaction. The maximum adsorption capacity for Cr(VI) by nZVI/SS/BC600 was 122.86 mg·g^-1. The properties of the material were analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), and X-ray diffraction (XRD). The results showed that the nZVI particles were uniformly supported on the biochar, and the BET surface areas of nZVI/SS/BC was 40.4837 m²·g^-1, an increase of 8.79 times compared with the control group. Mechanism studies showed that soluble starch reduced the formation of metal oxides, thereby improving the reducibility of the material, and co-precipitates were formed during the reaction. All results indicated that nZVI/SS/BC was a potential repair material that can effectively overcome the limitations of nZVI and achieve efficient and rapid repair of Cr(VI).

Radiation synthesis of imidazolium-based ionic liquid modified silica adsorbents for ReO4− adsorption

A series of ionic liquid functionalized silica-based adsorbents were synthesized and used to remove ReO₄⁻ from simulated radioactive wastewater.

Removal of heavy metals and radionuclides from water using nanomaterials: current scenario and future prospects

There is an increase in concern about the hazardous effects of radioactivity due to the presence of undesirable radioactive substances in our vicinity. Nuclear accidents such as Chernobyl (1986) and Fukushima (2011) have further raised concerns towards such incidents which have led to contamination of water bodies. Conventional methods of water purification are less efficient in decontamination of radioisotopes. They are usually neither cost-effective nor environmentally friendly. However, nanotechnology can play a vital role in providing practical solutions to this problem. Nano-engineered materials like metal oxides, metallic organic frameworks, and nanoparticle-impregnated membranes have proven to be highly efficient in treating contaminated water. Their unique characteristics such as high adsorption capacity, large specific surface area, high tensile strength, and excellent biocompatibility properties make them useful in the field of water purification. This review explores the present status and future prospects of nanomaterials as the next-generation water purification systems that can play an important role in the removal of heavy metals and radioactive contaminants from aqueous solutions.

Study on Synthesis and Adsorption Properties of ReO4 - Ion-Imprinted Polymer

In this work, an ion imprinted polymer (ReO₄ ^--IIP) of the perrhenate ion based on acrylamide (AM) and acrylic acid (AA) was prepared by solution polymerization using ReO₄ ^- as a template ion, N,N-methylenebisacrylamide (NMBA) as cross-linkers, hydrogen peroxide-vitamin C (H₂O₂-Vc) as an initiator, and a mixed solution of water (H₂O) and methanol (CH₃OH) with volume ratio v(H₂O)/v(CH₃OH) = 3:7 as a solvent. During the process of synthesis condition investigation and optimization, the adsorption capacity (Q) and the separation degree (R) in the equimolar concentration mixture solutions of NH₄ReO₄ and KMnO₄ were adopted as indexes, and the obtained optimal conditions were as follows: the molar ratios of NMBA, NH₄ReO₄, AA, H₂O₂, and Vc to AM were 5.73, 0.052, 1.29, 0.02, and 0.003, and the temperature and time of polymerization were 40 °C and 28 h, respectively. Under optimal conditions, the sample with indexes, Q and R of 0.064 mmol/g and 3.20, were harvested. What is more, a further reusability study found that good adsorption selectivity was maintained after repeating the experiment 9 times. Taking the non-IP prepared under the same conditions as a control, Fourier transform infrared spectroscopy, transmission electron microscopy, and Brunauer Emmett Teller were used to characterize the structure of the ReO₄ ^--IIP prepared under the optimal conditions. Finally, the kinetic study results showed that the zero-order kinetic model could better describe the adsorption process. The thermodynamic study results showed that the Langmuir model was more suitable for describing the isotherm adsorption process of the IIP.

The effects of carbon disulfide driven functionalization on graphene oxide for enhanced Pb(II) adsorption: Investigation of adsorption mechanism

The surface properties of graphene oxide (GO) have been identified as the key effects on the adsorption of Pb(II) from aqueous solutions in this study. This study reveals the effect of the surface reactivity of GO via Carbon Disulfide (CS₂) functionalization for Pb(II) adsorption. After successfully preparing CS₂ functionalized GO (GOCS), the specific techniques were applied to investigate Pb(II) adsorption onto GOCS. Results indicated that the new sulfur-containing functional groups incorporated onto GOCS significantly enhanced Pb(II) adsorption capacity on GOCS than that of GO, achieving an improvement of 31% in maximum adsorption capacity increasing from 292.8 to 383.4 mg g^-1. The equilibrium adsorption capacity for GOCS was 280.2 mg g^-1 having an improvement of 83.2% over that of 152.97 mg g^-1 for GO at the same initial concentration of 150 mg L^-1 under the optimal pH of 5.7. Moreover, the results of adsorption experiments showed an excellent fit to the Langmuir and Pseudo-Second-Order models indicating the monolayer and chemical adsorption, respectively. The mechanism for Pb(II) adsorption on GOCS was proposed as the coordination, electrostatic interactions, cation-pi interactions, and Lewis acid-base interactions. The regeneration study showed that GOCS had an appreciable reusability for Pb(II) adsorption with the adsorption capacity of 208.92 mg g^-1 after five regeneration cycles. In summary, GOCS has been proved to be a novel, useful, and potentially economic adsorbent for the high-efficiency removal of Pb(II) from aqueous solutions.

Structural Diversity of Bipyridinium-Based Uranyl Coordination Polymers: Synthesis, Characterization, and Ion-Exchange Application

As well-known functional groups with excellent electro/photochromic and ion-exchange properties, bipyridinium motifs have been used in functionalized metal-organic coordination polymers, but they are still rarely applied to construct actinide coordination polymers. In this work, we utilized a bipyridinium-based carboxylic acid, 1,1'-bis(4-carboxyphenyl)-4,4'-bipyridinium bis(chloride) ([H₂bcbp]Cl₂), as the organic ligand to assemble with uranyl cations. By the introduction of different kinds of auxiliary ligands and adjustment of the pH, five novel uranyl coordination compounds, 1-5, have been synthesized through hydrothermal reactions. Starting from uranyl ions and terephthalic acid (H₂TP) and H₂bcbp ligands, [(UO₂)₂(bcbp)(TP)₂]·3H₂O (1) has a wave-shaped two-dimensional (2D) structure consisting of dinuclear units connected by terephthalate linkers and further supported by the longer H₂bcbp ligands. [(UO₂)₂(bcbp)(PA)₂]·4H₂O (2) has a zigzag chain of dimeric uranium units, and [(UO₂)₂(bcbp)(bpdc)₂]·5H₂O (3) forms a one-dimensional ribbonlike structure. The 2D structures of [(UO₂)(bcbp)(OH)(H₂O)]·Cl (4) and [(UO₂)(bcbp)Cl]·Cl (5) are similar, both of which are constructed from dinuclear uranyl units and bcbp^2- ligands. Furthermore, the performance for perrhenate removal of compound 4 with a cationic framework is assessed, and we found that compound 4 can efficiently remove ReO₄^- from an aqueous solution in a wide range of pH values. This work extends the library of viologen derivative-based uranyl coordination polymers, provides to some extent broader insights into actinide coordination chemistry of functionalized ligands, and may facilitate the ion-exchange applications of related coordination polymers.

Efficient Photocatalytic Reduction of Aqueous Perrhenate and Pertechnetate

The pertechnetate anion (⁹⁹TcO₄^-) is a long-lived radioactive species that is soluble in aqueous solution, in contrast to sparingly soluble ⁹⁹TcO₂. Results are reported for photocatalytic reduction and removal of perrhenate (ReO₄^-), a nonradioactive surrogate for ⁹⁹TcO₄^-, using a TiO₂ (P25) nanoparticle suspension in formic acid under UV-visible irradiation. Re(VII) removal up to 98% was achieved at pH = 3 under air or N₂. The proposed mechanism is Re(VII)/Re(IV) reduction mediated by reducing radicals (^·CO₂^-) from oxidation of formic acid, not direct reduction by photogenerated electrons of TiO₂. Recycling results indicate that photocatalytic reduction of ReO₄^- exhibits excellent regeneration and high activity with >95% removal even after five cycles. ⁹⁹Tc(VII) is more easily reduced than Re(VII) in the presence of NO₃^- with very slow redissolution of reduced ⁹⁹Tc. This study presents a novel method for the removal of ReO₄^-/⁹⁹TcO₄^- from aqueous solution, with potential application for deep geological disposal.

Porous iron material for TcO4- and ReO4- sequestration from groundwater under ambient oxic conditions

Technetium-99 (⁹⁹Tc) is a major contaminant at nuclear power plants and several US Department of Energy sites. Its most common aqueous species, pertechnetate (TcO₄^-), is very mobile in the environment, and currently there are no effective technologies for its sequestration. In this work, a porous iron (pFe) material was investigated for TcO₄^- and perrhenate (ReO₄^-) sequestration from artificial groundwater. The pFe was significantly more effective than granular iron for both TcO₄^- and ReO₄- sequestration under oxic conditions. The Tc removal capacity was 27.5 mg Tc/g pFe at pH ˜6.8, while the Re removal capacity was 23.9 mg Re/g pFe at pH ˜10.6. Tc K-edge XANES and EXAFS analyses indicated that the removed Tc species was 70-80% Tc(IV) that was likely incorporated into Fe corrosion products (i.e., Fe(OOH), Fe₃O₄) and 20-30% unreduced TcO₄^-. In contrast, the removed Re species was ReO₄^- only, without detectable Re(IV). In addition, the sequestered ReO₄^- was not extracted (<3%) by 0.1 M Na₂SO₄ and 1 M KI solution, which indicated that ReO₄^- and by chemical analogy, unreduced TcO₄^-, was likely incorporated into Fe corrosion products. This inexpensive pFe material may be applied to the sequestration and stabilization of ⁹⁹TcO₄^- from contaminated environments and nuclear waste streams.

K2Ti6O13 hybridized graphene oxide: Effective enhancement in photodegradation of RhB and photoreduction of U(VI)

The environmental pollutions by organic pollutants and radionuclides have aroused great concern. Developing highly efficient elimination methods becomes an imperious demand. In this study, a nanocomposite of K₂Ti₆O₁₃ (KTO) nanobelts hybridized graphene oxide (GO) nanosheets (GO/KTO) was used to photodegrade RhB (dye) and photoreduce U(VI) (radionuclide), which was synthesized by a facile hydrothermal method. The adsorption capacity and the slope (k) of the curve -ln(C/C) versus time in photodegradation of RhB by GO/KTO were higher than that by GO and KTO. In the presence of different free radical scavengers, superoxide radical (·O₂^-) was found to play the most significant role in the reaction. The XPS experiment indicates U(VI) was successfully photoreduced to less toxic U(IV). The pH dependent photocatalytic experiments on RhB and U(VI) both showed the best performance at neutral pH value (from pH 6 to pH 8). To investigate the reason for the enhanced photocatalysis of GO/KTO, the morphology/microstructure, optical and photo-electrochemical properties were examined. The enhanced abilities of separation of photo electrons and holes and the adsorption of GO/KTO were ascribed to the structure of KTO nanobelts laying on the surface of GO nanosheets, which may maximize the contacting area between KTO and GO, and thus greatly reduce the surface related oxygen defects to enhance the electron interface transfer between KTO and GO and decrease the recombination efficiency of electrons and holes. These results showed the GO/KTO has great application potential in environmental treatment of organic pollutants and high valent heavy/radionuclide ions at neutral condition.

Effective Removal of Anionic Re(VII) by Surface-Modified Ti2CT x MXene Nanocomposites: Implications for Tc(VII) Sequestration

Environmental contamination by ⁹⁹Tc(VII) from radioactive wastewater streams is of particular concern due to the long half-life of ⁹⁹Tc and high mobility of pertechnetate. Herein, we report a novel MXene-polyelectrolyte nanocomposite with three-dimensional networks for enhanced removal of perrhenate, which is pertechnetate simulant. The introduction of poly(diallyldimethylammonium chloride) (PDDA) regulates the surface charge and improves the stability of Ti₂CT _x nanosheet, resulting in Re(VII) removal capacity of up to 363 mg g^-1, and fast sorption kinetics. The Ti₂CT _x/PDDA nanocomposite furthermore exhibits good selectivity for ReO₄^- when competing anions (such as Cl^- and SO₄^2-) coexist at a concentration of 1800 times. The immobilization mechanism was confirmed as a sorption-reduction process by batch sorption experiments and X-ray photoelectron spectroscopy. The pH-dependent reducing activity of Ti₂CT _x/PDDA nanocomposite toward Re(VII) was clarified by X-ray absorption spectroscopy. As the pH increases, the local environment gradually changes from octahedral-coordinated Re(IV) to tetrahedral-coordinated Re(VII). The overall results suggest that Ti₂CT _x/PDDA nanocomposite may be a promising candidate for efficient elimination of Tc contamination. The reported surface modification strategy might result in applications of MXene-based materials in environmental remediation of other oxidized anion pollutants.

Development of α- and γ-Fe2O3 decorated graphene oxides for glyphosate removal from water

In this study, the proposed adsorbent composed of graphene oxide (GO) functionalized by magnetic nanoparticles of iron oxide (α-γ-Fe2O3) was obtained by a simple ultrasonication process. This new material was used for the removal of glyphosate in water. The nanoparticulated iron oxide used was synthesized by means of a modified sol-gel method, which does not use organic solvents. The adsorbent material (GO-α-γ-Fe2O3) obtained was characterized by magnetic measurements, and it can be proved that it has superparamagnetic properties, allowing fast and efficient magnetic separation. The equilibrium time for the adsorption of glyphosate when using GO-α-γ-Fe2O3 was 2 hours and the maximum removal was 92% at 15°C, with a maximum adsorption capacity of 46.8 mg g-1. Langmuir model and pseudo-second-order kinetic model correlated satisfactorily to the experimental data. The thermodynamic parameters showed that the adsorption of glyphosate on GO-α-γ-Fe2O3 was spontaneous, exothermic and thermodynamically favorable at temperature of 15-45°C. Thus the adsorbent material GO-α-γ-Fe2O3 proposed in this study is considered a good candidate to be used in the removal of glyphosate from aqueous solutions, presenting high adsorption capacity, low cost and magnetic properties that facilitate the separation of the adsorbent material.

Fabrication of core-shell α-MnO2@polydopamine nanocomposites for the efficient and ultra-fast removal of U(vi) from aqueous solution

The development of functional nanoparticles with ultra-fast and high adsorption capacities is an important strategy for wastewater treatment. Here, α-MnO2@polydopamine nanocomposites (α-MnO2@PDAs) were synthesized by coating α-MnO2 nanowires with polydopamine and were used to remove U(vi) from solutions. The α-MnO2@PDAs possessed a large surface area (22.8 m2 g-1), excellent dispersibility, and abundant surface functional groups. The adsorption of U(vi) was clearly influenced by pH rather than ionic strength, which suggested inner-sphere surface complexation. The adsorption could reach equilibrium within 5 min, and the kinetics was well fitted by the pseudo-second-order model. The maximum adsorption capacity determined from the Langmuir model at 298 K and different pH values was in the order of pH 5.0 (383.14 mg g-1) > 8.0 (213.22 mg g-1) > 3.0 (158.73 mg g-1), which indicated that the α-MnO2@PDAs could still remove U(vi) efficiently at a pH of 8, which is close to the pH of natural water. Spectroscopic analyses suggested that favourable adsorption occurred on active binding sites, e.g., phenolic O-H and amide functional groups. The higher removal efficiency of the α-MnO2@PDAs for U(vi) was due to electrostatic attraction and surface complexation. Moreover, the practical applicability of the α-MnO2@PDAs in the treatment of real wastewater was confirmed by their high adsorption capacity for U(vi) from natural or synthetic water.

Reduced graphene oxide-nano zero value iron (rGO-nZVI) micro-electrolysis accelerating Cr(VI) removal in aquifer

Nanoscale zero-valent iron (nZVI) assembled on graphene oxide (GO) (rGO-nZVI) composites were synthesized by reduction of GO and ferrous ions with potassium borohydride, for use in Cr(VI) removal from aqueous solution. The results showed that the two-dimensional structure of GO could provide a skeleton support for Fe⁰, thus overcoming the bottleneck of aggregation for nZVI. Also, rGO-nZVI would form a ferric-carbon micro-electrolysis system in Cr(VI)-contaminated aquifers, enhancing and accelerating electron transfer, exhibiting high rate and capacity for Cr(VI) removal. The optimum dosage of the applied rGO-nZVI was linearly correlated with the initial Cr(VI) concentration. Characterization of rGO-nZVI before and after reaction with Cr(VI) revealed the process of Cr(VI) removal: rGO-nZVI firstly transferred electrons from Fe⁰ cores via their Fe(II)/Fe(III) shells to the GO sheet; there, negatively charged Cr(VI) received electrons and changed into positively charged Cr(III), which was adsorbed by the negatively charged GO sheet, avoiding the capping and passivating of nZVI. rGO-nZVI formed a good electrically conductive network, and thus had long-term electron releasing properties, which was important for groundwater remediation.

99TcO4- remediation by a cationic polymeric network

Direct removal of ⁹⁹TcO₄^- from the highly acidic solution of used nuclear fuel is highly beneficial for the recovery of uranium and plutonium and more importantly aids in the elimination of ⁹⁹Tc discharge into the environment. However, this task represents a huge challenge given the combined extreme conditions of super acidity, high ionic strength, and strong radiation field. Here we overcome this challenge using a cationic polymeric network with significant TcO₄^- uptake capabilities in four aspects: the fastest sorption kinetics, the highest sorption capacity, the most promising uptake performance from highly acidic solutions, and excellent radiation-resistance and hydrolytic stability among all anion sorbent materials reported. In addition, this material is fully recyclable for multiple sorption/desorption trials, making it extremely attractive for waste partitioning and emergency remediation. The excellent TcO₄^- uptake capability is elucidated by X-ray absorption spectroscopy, solid-state NMR measurement, and density functional theory analysis on anion coordination and bonding.

The novel PEI-modified biochars and their application for the efficient elimination of Cr(VI) from aqueous solutions

In this study, the polyethyleneimine (PEI) was grafted onto the biochars from chestnut shells and nori via the cross-linking reaction. Scanning electron microscopy, transmission electron microscopy and Fourier transferred infrared spectroscopy analysis indicated that the PEI was successfully grafted on the surface of biochars. The PEI modified and pristine biochars were used as adsorbents to remove Cr(VI) from aqueous solutions as a function of pH, ionic strength, contact time and initial concentrations of Cr(VI) through batch technique. The strongly pH-dependent and ionic strength-independent of Cr(VI) sorption indicated that the sorption was mainly dominated by electrostatic interaction and inner-sphere surface complexation. The maximum sorption capacities of PEI modified chestnut shell and nori biochars were 141.42 and 222.84 mg/g, respectively, which were significantly higher than those of pristine biochars. The PEI grafted onto the biochars significantly enhanced Cr(VI) sorption capacity because PEI, which contains volumes of amine/imine groups, provided an excellent platform for Cr(VI) ions removal. In addition, the sorption-desorption experimental results indicated that the PEI modified biochars possessed a stable and recyclable performance. All these results manifested that the PEI modified biochars could be applied as environmentally friendly and efficient adsorbents for the removal of Cr(VI) from wastewater.

Metal-organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.