Prevalent intrinsic emission from nonaromatic amino acids and poly(amino acids)

Multi-Step and Switchable Energy Transfer in Photoluminescent Organosilicone Capsules

Light-harvesting is of vital importance for many events, such as photosynthesis. To efficiently gather and transfer solar energy, delicate antenna is needed, which has been achieved by algae and plants. However, construction of efficient light-harvesting systems using multiple, artificial building blocks is still challenging. Here, blue-emitting organosilicone capsules containing carbon dots (denoted as CDs-Si) in ethanol are prepared, which can effectively transfer energy to green-emitting (silicone-functionalized bodipy, Si-BODIPY) or red-emitting (rhodamine b, RhB) dyes. In ternary system, sequential Förster resonance energy transfer from CDs-Si to Si-BODIPY and further to RhB is realized, which is accompanied with a less pronounced, parallel FRET directly from CDs-Si to RhB. The overall efficiency of energy transfer reaches ≈86%. By introducing a photoswitch (1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene, DAE) to the system, the emission becomes switchable under alternative illumination with UV and visible light, leading to the formation of smart artificial light-harvesting systems.

ε-Poly-l-lysine: A Naturally Occurring Biodegradable Polypeptide for Selective Detection of 5-Nitroimidazole Antibiotics in Animal Products and Living Cells via Fluorescence

The 5-nitroimidazole (5-NI) class of antibiotics, such as metronidazole, ornidazole, secnidazole, and tinidazole, are widely used to prevent bacterial infection in humans and livestock industries. However, their overuse contaminates the farmed animal products and water bodies. Hence, a selective, sensitive, and cost-effective method to detect 5-NI antibiotics is the need of the hour. Herein, we report a rapid, inexpensive, and efficient sensing system to detect 5-NI drugs using an as-prepared solution of ε-poly-l-lysine (ε-PL), a naturally occurring and biodegradable homopolypeptide that has an intrinsic fluorescence via clustering-triggered emission. The low nanomolar detection limit (3.25-3.97 nM) for the aforementioned representative 5-NI drugs highlights the sensitivity of the system, outperforming most of the reported sensors alike. The resulting fluorescence quenching was found to be static in nature. Importantly, excellent recovery (100.26-104.41%) was obtained for all real samples and animal products tested. Visual detection was demonstrated by using paper strips and silica gel for practical applications. Furthermore, ε-PL could detect 5-NI antibiotics in living 3T3-L1 mouse fibroblast cells via cellular imaging. Taken together, the present work demonstrates the detection of 5-NI antibiotics using a biocompatible natural polypeptide, ε-PL, and represents a simple and inexpensive analytical tool for practical application.

Water-Soluble Luminescent Polymers with Room-Temperature Phosphorescence Based on the α-Amino Acids

Nonconventional luminophores have received increasing attention, owing to their fundamental importance, advantages in outstanding biocompatibility, easy preparation, environmental friendliness, and potential applications in sensing, imaging, and encryption. Purely organic molecules with outstanding fluorescence and room-temperature phosphorescence (RTP) have emerged as a new library of benign afterglow agents. However, the cost, toxicity, high reactivity, and poor stability of materials also limit their practical applications. Therefore, some natural products, synthetic compounds, and biomolecules have entered horizons of people. The as-designed exhibits sky blue and green fluorescence emission and green RTP emission (a lifetime of 343 ms and phosphorescence quantum of 15.3%) under air condition. This study presents an organic fluorescence for biological imaging and RTP for anti-counterfeiting and encryption based on amino acids, maleic anhydride and 4-vinylbenzenesulfonic acid sodium salt hydrate. This study provides a strategy for nonconventional luminophores in designing and synthesizing pure organic RTP materials.

Controllable Blue Shift and Enhancement Emission during the Gradually Increasing Molecular Weight of Polyacrylamide

Nonconventional luminescent polymers have become research hotspots due to their advantages such as persistent room temperature phosphorescence (p-RTP) emission and strong film-forming properties. It is proven that the molecular weight (MW) of such luminescent polymers has a significant impact on their emission over a large range, generally with a red shift as the MW increases. Herein, four controllable MW polyacrylamides are prepared via reversible addition-fragmentation chain transfer polymerization (RAFT), and their photoluminescence quantum yield and p-RTP lifetimes gradually increase with the increasing MW. The emission of p-RTP gradually shifts blue with increasing MW, which is likely due to the gradually changing interactions between the electron-rich portion in RAFT reagent and the increasing acrylamide (AM) units in the molecular chain. These can be reasonably explained through small angle X-ray scattering, the clustering-triggered emission (CTE) mechanism, and supported by theoretical calculations. Powder with controllable p-RTP capability has the potential for strategic anti-counterfeiting encryption. The above results not only promote the development of the CTE mechanism toward more precise explanations but also provide new ideas for the preparation of nonconventional luminescent polymers with controllable p-RTP emission performance.

Early events during the aggregation of Aβ16-22-derived switch-peptides tracked using Protein Charge Transfer Spectra

BACKGROUND

Understanding Aβ aggregation and inhibiting it at early stages is of utmost importance in treating Alzheimer's and other related amyloidogenic diseases. However, majority of the techniques to study Aβ aggregation mainly target the late stages; while those used to monitor early stages are either expensive, use extrinsic dyes, or do not provide information on molecular level interactions. Here, we investigate the early events of Aβ16-22(KLVFFAE) aggregation using Aβ16-22 derived switch-peptides (SwPs) through a novel label-free approach employing Protein Charge Transfer Spectra (ProCharTS).

RESULTS

When pH is increased from 2 to 7.2, the Aβ-derived switch peptides undergo controlled self-assembly, where the initial random coil peptides convert into β-sheet. We leveraged the intrinsic absorbance/luminescence arising from ProCharTS among growing peptide oligomers to observe the aggregation kinetics in real-time. In comparison to monomer, the lysine and glutamate headgroups in the peptide oligomer are expected to come in proximity enhancing ProCharTS intensity due to photoinduced electron transfer. With a combination of Aβ-derived switch-peptides and ProCharTS, we obtained structural insights on the early stages of Aβ-derived SwP aggregation in four unique peptides. Increase in scatter corrected ProCharTS absorbance (250-500 nm) and luminescence (320-720 nm) along with decreased mean luminescence lifetime (2.3-0.8 ns) characterize the initial stages of aggregation monitored for 1-96 h depending on the peptide. We correlated the results with Circular Dichroism (CD), 8-anilino-1-naphthalenesulfonic acid (ANS) and Thioflavin T (ThT) measurements.

SIGNIFICANCE

We demonstrate ProCharTS as an intrinsic analytical probe with following advantages over other conventional methods to track aggregation: it is a label-free probe; it's intensity can be measured using a UV-Vis spectrophotometer; it is more sensitive in detecting the early molecular events in aggregation compared to ANS and ThT; and it can provide information on specific contacts made between charged headgroups of Lysine/Glutamate in the oligomer.

Red-Shifted Luminescence of Acrylonitrile-Containing Copolymers: A Matter of One Methyl Unit

Copolymerization provides an effective approach to tune the photophysical properties of non-conventional luminescent polymers (NCLPs). In this study, the controlling of intrinsic emissions of polyacrylonitrile (PAN) copolymers is revealed by a delicate difference of secondary monomers. The introduction of methacrylate comonomers can induce a 70-nm red-shifting in the PL emission of copolymers compared with that of acrylate-containing copolymers. The mechanism of such "copolymerization induced red-shifting" in PAN copolymers is investigated. It is demonstrated that the presence of the α-methyl group in the copolymers can enhance the chain rigidity and through-space conjugation (TSC) of C≡N groups, resulting in the red-shifting of emission.

Size Isn't Everything: Geometric Tuning in Polycyclic Aromatic Hydrocarbons and Its Implications for Carbon Nanodots

Recent developments in light-emitting carbon nanodots and molecular organic semiconductors have seen renewed interest in the properties of polycyclic aromatic hydrocarbons (PAHs) as a family. The networks of delocalized π electrons in sp2-hybridized carbon grant PAHs light-emissive properties right across the visible spectrum. However, the mechanistic understanding of their emission energy has been limited due to the ground state-focused methods of determination. This computational chemistry work, therefore, seeks to validate existing rules and elucidate new features and characteristics of PAHs that influence their emissions. Predictions based on (time-dependent) density functional theory account for the full 3-dimensional electronic structure of ground and excited states and reveal that twisting and near-degeneracies strongly influence emission spectra and may therefore be used to tune the color of PAHs and, hence, carbon nanodots. We particularly note that the influence of twisting goes beyond torsional destabilization of the ground-state and geometric relaxation of the excited state, with a third contribution associated with the electric transition dipole. Symmetries and peri-condensation may also have an effect, but this could not be statistically confirmed. In pursuing this goal, we demonstrate that with minimal changes to molecular size, the entire visible spectrum may be spanned by geometric modification alone; we have also provided a first estimate of emission energy for 35 molecules currently lacking published emission spectra as well as clear guidelines for when more sophisticated computational techniques are required to predict the properties of PAHs accurately.

Chirality-Regulated Clusteroluminescence in Polypeptides

The low emission efficiency of clusteroluminogens restricts their practical applications in the fields of sensors and biological imaging. In this work, the clusteroluminescence of ordered/disordered polypeptides was observed, and the photoluminescence (PL) intensity of polypeptides can be modulated by the chirality of amino acid residues. Polyglutamates with different chiral compositions were synthesized, and the racemic polypeptides exhibited a significantly higher PL intensity than the enantiopure ones. This emission originates from the n-π* transition between C═O groups of polypeptides and is enhanced by clusterization of polypeptides. CD and Fourier transform infrared spectra demonstrated that the enantiopure and racemic polypeptides form α-helix and random coil structures, respectively. The disordered polypeptides can form more chain entanglements and interchain interactions because of their high flexibility, leading to more clusterizations and stronger PL intensity. The rigidity of ordered helical structures restrains the chain entanglements, and the formation of intrachain hydrogen bonds between amide groups of the backbone impairs the interchain interaction between polypeptides, resulting in lower PL intensity. The PL intensity of the polypeptides can also be manipulated by the addition of urea or trifluoroacetic acid. Our study not only elucidates the chirality/order-based structure-property relationship of clusteroluminescence in peptide-based polymers but also offers implications for the rational design of fluorescent peptides/proteins.

Barbier Polymerization-Induced Emission towards Fully Substituted Polyethylene Analogues with Non-Traditional Intrinsic Luminescence

The properties of polyethylene are highly dependent on the variety and quantity of substitutions. Generally, polyethylene can only be fully substituted with fluorine atoms, mainly e. g., polytetrafluoroethylene and nafion, because atomic radius of fluorine atom is small enough. The preparation of fully substituted polyethylene analogues (FSPEA) and their non-traditional intrinsic luminescence (NTIL) are attractive, especially for substitutions with relatively larger atomic radii than a fluorine atom. Here, Barbier polymerization-induced emission (PIE) is demonstrated as a universal method for the molecular design of NTIL type FSPEAs with intriguing aggregation-induced emission (AIE) behaviors. Through Barbier polymerization of diphenyldichloromethane and different peroxyesters in the presence of Mg in one pot, a series of FSPEAs, including polytriphenylethanol (PTPE), polydiphenylfurylethanol (PDPFE), polydiphenylthiophenylethanol (PDPTE) and polydiphenylnaphthylethanol (PDPNE) have been successfully prepared. Further potential applications for explosive detection, artificial light-harvesting system and white phosphor-converted light-emitting diode are investigated. Therefore, this work opens up a new approach for the molecular design of FSPEA with non-conjugated luminescence, which may cause inspirations to different research fields like polyolefin and luminescent materials.

Inorganic salt recrystallization strategy for achieving ultralong room temperature phosphorescence through structural confinement and aluminized reconstruction

Achieving highly efficient and stable room temperature phosphorescence (RTP) with ultralong lifetime is critical for the multi-purpose applications of phosphorescent materials. In this work, we propose an inorganic salt heating recrystallization strategy to simultaneously improve the lifetime, quantum efficiency, and stability of phosphorescent scandium/leucine microspheres (Sc/Leu-MSs). Inorganic salt-treated Sc/Leu-MSs are obtained by simply heating and drying inorganic salt solution containing Sc/Leu-MSs, which can achieve a maximum lifetime increase of 4.42-times from 208.37 ms (Sc/Leu-MSs) to 920.08 ms (Al2(SO4)3-treated Sc/Leu-MSs), accompanied by a RTP intensity increase up to 24.08-times. The enhancement mechanism of RTP efficiency is attributed to the stabilization of triplet excitons caused by inorganic salt coating that suppresses molecular motion and isolates oxygen on the one hand, and the efficient intersystem crossing promoted by aluminized reconstruction-caused duplex heavy atom effects on the other hand. This study provides new design principle and a facile strategy to construct RTP materials with ultralong lifetime, high phosphorescent quantum efficiency, and high stability for promising applications such as anti-counterfeiting and light emitting diodes.

The Key Role of Molecular Packing in Luminescence Property: From Adjacent Molecules to Molecular Aggregates

The luminescence materials act as the key components in many functional devices, as well as the detection and imaging systems, which can be permeated in each aspect of modern life, and attract more and more attention for the creative technology and applications. In addition to the diverse properties of organic luminogens, the multiple molecular packing at aggregated states frequently offers new and/or exciting performance. However, there still lacks comprehensive analysis of molecular packing in these organic materials, resulting in an increased gap between molecular design and practical applications. In this review, from the basic knowledge of organic compounds as single molecules, to the discernable property of excimer, charge transfer (CT) complex or self-assembly systems by adjacent molecules, and finally to the opto-electronic performance of molecular aggregates, the relevant factors to molecular packing and practical applications are discussed.

Hydrogen-Bonding-Driven Nontraditional Photoluminescence of a β-Enamino Ester

Nontraditional luminogens (NTLs) do not contain any conventional chromophores (large π-conjugated structures), but they do show intrinsic photoluminescence. To achieve photoluminescence from NTLs, it is necessary to increase the extent of through-space conjugation (TSC) and suppress nonradiative decay. Incorporating strong physical interactions such as hydrogen bonding is an effective strategy to achieve this. In this work, we carried out comparative studies on the photoluminescence behaviors of two β-enamino esters with similar chemical structures, namely methyl 3-aminocrotonate (MAC) and methyl (E)-3-(1-pyrrolidinyl)-2-butenoate (MPB). MAC crystal emits blue fluorescence under UV irradiation. The critical cluster concentration of MAC in ethanol solutions was determined by studying the relationship between the photoluminescence intensity (UV-visible absorbance) and concentration. Furthermore, MAC exhibits solvatochromism, and its emission wavelength redshifts as the solvent polarity increases. On the contrary, MPB is non-emissive in both solid state and solutions. Crystal structures and theoretical calculation prove that strong inter- and intramolecular hydrogen bonds lead to the formation of large amounts of TSC of MAC molecules in aggregated states. No hydrogen bonds and thus no effective TSC can be formed between or within MPB molecules, and this is the reason for its non-emissive nature. This work provides a deeper understanding of how hydrogen bonding contributes to the luminescence of NTLs.

Photoluminescence in mammal fur: 111 years of research

Photoluminescence in the pelage of mammals, a topic that has gained considerable recent research interest, was first documented in the 1700s and reported sporadically in the literature over the last century. The first detailed species accounts were of rabbits and humans, published 111 years ago in 1911. Recent studies have largely overlooked this earlier research into photoluminescent mammalian taxa and their luminophores. Here we provide a comprehensive update on existing research on photoluminescence in mammal fur, with the intention of drawing attention to earlier pioneering research in this field. We provide an overview on appropriate terminology, explain the physics of photoluminescence, and explore pigmentation and the ubiquitous photoluminescence of animal tissues, before touching on the emerging debate regarding visual function. We then provide a chronological account of research into mammalian fur photoluminescence, from the earliest discoveries and identification of luminophores to the most recent studies. While all mammal fur is likely to have a general low-level photoluminescence due to the presence of the protein keratin, fur glows luminously under ultraviolet light if it contains significant concentrations of tryptophan metabolites or porphyrins. Finally, we briefly discuss issues associated with preserved museum specimens in studies of photoluminescence. The study of mammal fur photoluminescence has a substantial history, which provides a broad foundation on which future studies can be grounded.

Designing Nonconventional Luminescent Materials with Efficient Emission in Dilute Solutions via Modulation of Dynamic Hydrogen Bonds

Nonconventional luminescent materials (NLMs) which do not contain traditional aromatic chromophores are of great interest due to their unique chemical structures, optical properties, and their potential applications in various areas, such as cellular imaging and chemical sensing. However, most reported NLMs show weak or no emission in dilute solutions, which severely limits their applications. In this work, dynamic hydrogen bonds were utilized to design NLMs with efficient emission in dilute solutions. To further validate the results, polymers P1 and P2 were successfully prepared and investigated. It was found that the luminescence quantum efficiency of P1 and P2 at a concentration of 0.1 mg/mL in water solution was 8.9 and 0.6%, respectively. The high efficiency can be attributed to the fact that polymer P1 has more intra- or intermolecular dynamic hydrogen bonds and other short interactions than P2 in dilute solutions, allowing P1 to achieve the through-space conjugation effect to increase the degree of system conjugation, restrict molecular motion, and decrease nonradiative transitions, which can effectively improve luminescence. In addition, polymer P2 exhibits the characteristics of clustering-triggered emission, excitation wavelength-dependent and concentration-dependent fluorescence properties, excellent photobleaching resistance, low cytotoxicity, and selective recognition of Fe³⁺. The present study investigates the manipulation of luminescence properties of NLMs in dilute solutions through the modulation of dynamic hydrogen bonds. This approach can serve as a semi-empirical technique for designing and building innovative NLMs in the times ahead.

A Comprehensive Analysis of the Intrinsic Visible Fluorescence Emitted by Peptide/Protein Amyloid-like Assemblies

Amyloid aggregation is a widespread process that involves proteins and peptides with different molecular complexity and amino acid composition. The structural motif (cross-β) underlying this supramolecular organization generates aggregates endowed with special mechanical and spectroscopic properties with huge implications in biomedical and technological fields, including emerging precision medicine. The puzzling ability of these assemblies to emit intrinsic and label-free fluorescence in regions of the electromagnetic spectrum, such as visible and even infrared, usually considered to be forbidden in the polypeptide chain, has attracted interest for its many implications in both basic and applied science. Despite the interest in this phenomenon, the physical basis of its origin is still poorly understood. To gain a global view of the available information on this phenomenon, we here provide an exhaustive survey of the current literature in which original data on this fluorescence have been reported. The emitting systems have been classified in terms of their molecular complexity, amino acid composition, and physical state. Information about the wavelength of the radiation used for the excitation as well as the emission range/peak has also been retrieved. The data collected here provide a picture of the complexity of this multifaceted phenomenon that could be helpful for future studies aimed at defining its structural and electronic basis and/or stimulating new applications.

Excitation-Dependent Multicolour Luminescence of Organic Materials: Internal Mechanism and Potential Applications

Excitation-dependent emission (Ex-de) materials have been of considerable academic interest and have potential applications in real life. Such multicolour luminescence is a characteristic exception to the ubiquitously accepted Kasha's rule. This phenomenon has been increasingly presented in some studies on different luminescence systems; however, a systematic overview of the mechanisms underlying this phenomenon is currently absent. Herein, we resolve this issue by classifying multicolour luminescence from single chromophores and dual/ternary chromophores, as well as multiple emitting species. The underlying processes are described based on electronic and/or geometrical conditions under which the phenomenon occurs. Before we present it in categories, related photophysical and photochemical foundations are introduced. This systematic overview will provide a clear approach to designing multicolour luminescence materials for special applications.

Poly-L-aspartic acid based nonconventional luminescent biomacromolecules with efficient emission in dilute solutions for Al3+ detection

Nonconventional luminescent macromolecules exhibiting bright fluorescence or phosphorescence emission at high concentrations and solid-state have attracted significant attention due to their promising application in different fields. However, most reported nonconventional luminescent macromolecules show weak or no emission in dilute solutions, limiting their large-scale applications. Herein, nonconventional luminescent biomacromolecules with hydrophobic rigid chains, hydrophilic flexibility and inter- or intra-molecular hydrogen bonding interactions were proposed to achieve effective luminescence in dilute solutions. Poly-L-aspartic acid (PASA) with a fluorescence quantum yield of 4.6 % in a dilute solution (0.8 mg/mL) was synthesized to validate this design strategy. The fluorescence intensity of PASA solution increased with the increase of the concentration, demonstrating a clustering-triggered emission (CTE) effect. Furthermore, the fluorescence intensity significantly enhanced when adding Al³⁺ into PASA aqueous solution via the Al³⁺ recognition effect. The detection limits for Al³⁺ (1.71 × 10^-6 mol/L) meet the World Health Organization (WHO) requirements for food detection. At last, PASA solid-state samples exhibit room temperature phosphorescence emission.

Molecular-level enhanced clusterization-triggered emission of nonconventional luminophores in dilute aqueous solution

Nonconjugated and nonaromatic luminophores based on clustering-triggered emission derived from through-space conjugation have drawn emerging attention in recent years. The reported nonconventional luminophores are emissive in concentrated solution and/or in the solid state, but they tend to be nonluminescent in dilute solution, which greatly limits their sensing and imaging applications. Herein, we design unique clusteroluminogens through modification of cyclodextrin (CD) with amino acids to enable the intermolecular and intramolecular clusterization of chromophores in CD-based confined space. The resulted through-space interactions along with conformation rigidification originated from hydrogen bond interaction and complexation interaction generate blue to cyan fluorescence even in the dilute solution (0.035 wt.%, quantum yield of 40.70%). Moreover, the prepared histidine-modified CD (CDHis) is demonstrated for fluorescent detection of chlortetracycline with high sensitivity and selectivity. This work provides a new and universal strategy to synthesize nonconventional luminophores with bright fluorescence in dilute aqueous solution through molecular-level enhanced clusterization-triggered emission.

One-Pot Synthesis of Stimuli-Responsive Fluorescent Polymers through Polymerization-Induced Emission

Stimuli-responsive opposite emission (A)/absorption (B) polymer material (A∪B = Ω and A∩B = Ø) represents a novel polymer material that is difficult to prepare. Here, we demonstrate a one-pot strategy for the molecular design of stimuli-responsive opposite emission/absorption polymer material with intriguing properties of opposite emission/absorption and aggregation-induced emission (AIE) type nontraditional intrinsic luminescence (NTIL) in the visible region, through reversible addition-fragmentation chain transfer polymerization-induced emission (PIE) of the N,N-dimethyl-triphenylmethanol moiety. Investigations reveal that NTIL is due to the through-space conjugation effect caused by polymer chain entanglement, when increasing the repeating unit number. The corresponding stimuli-responsive opposite emission/absorption properties are derived from the carbocation-quinoid mechanism, which enables the fluorescence encryption capability. This work therefore demonstrates the proof of concept of a novel opposite emission/absorption polymer material that might cause inspiration in different fields.

A Dynamic Supramolecular H-bonding Network with Orthogonally Tunable Clusteroluminescence

Enabling dynamically tunable emissive systems offers opportunities for constructing smart materials. Clusteroluminescence, as unconventional luminescence, has attracted increasing attention in both fundamental and applied sciences. Herein, we report a supramolecular poly(disulfides) network with tunable clusteroluminescence. The reticular H-bonds synergize the rigidity and mobility of dynamic networks, and endow the resulting materials with mechanical adaptivity and robustness, simultaneously enabling efficient clusteroluminescence and phosphorescence at 77 K. Orthogonally tunable luminescence are achieved in two manners, i.e., slow backbone disulfide exchange and fast side-chain metal coordination. Further exploration of the reprocessability and chemical closed-loop recycling of intrinsic dynamic networks for sustainable materials is feasible. We foresee that the synergistic strategy of dynamic chemistry offers a novel pathway and potential opportunities for smart emissive materials.

Intrinsic Fluorescence in Peptide Amphiphile Micelles with Protein-Inspired Phosphate Sensing

Although peptide amphiphile micelles (PAMs) have been widely studied since they were developed in the late 1990s, to the author’s knowledge, there have been no reports that PAMs intrinsically fluoresce without a fluorescent tag, according to the aggregation-induced emission (AIE) effect. This unexpected fluorescence behavior adds noteworthy value to both the peptide amphiphile and AIE communities. For PAMs, intrinsic fluorescence becomes another highly useful feature to add to this well-studied material platform that features precise synthetic control, tunable self-assembly, and straightforward functionalization, with clear potential applications in bioinspired materials for bioimaging and fluorescent sensing. For AIE, it is extremely rare and highly desirable for one platform to exhibit precise tunability on multiple length scales in aqeuous solutions, positioning PAMs as uniquely well-suited for systematic AIE mechanistic study and sequence-specific functionalization for bioinspired AIE applications. In this work, the author proposes that AIE occurs across intermolecular emissive pathways created by the closely packed peptide amide bonds in the micelle corona upon self-assembly, with maximum excitation and emission wavelengths of 355 and 430 nm, respectively. Of the three PAMs evaluated here, the PAM with tightly packed random coil peptide conformation and maximum peptide length had the largest quantum yield, indicating that tuning molecular design can further optimize the intrinsic emissive properties of PAMs. To probe the sensing capabilities of AIE PAMs, a PAM was designed to incorporate a protein-derived phosphate-binding sequence. It detected phosphate down to 1 ppm through AIE-enhanced second-order aggregation, demonstrating that AIE in PAMs leverages tunable biomimicry to perform protein-inspired sensing.

Clustering-Triggered Emission of EPS-605 Nanoparticles and Their Application in Biosensing

Natural carbohydrates with intrinsic luminescent properties have drawn increasing attention thanks to their fundamental importance and promising applications. To expand the range of natural nonconventional biomacromolecule luminogens and to gain deep insights into their emission mechanism, we prepared EPS-605, a naturally occurring spherical nanoparticle based on negatively charged exopolysaccharides (EPS), and studied its emission behavior. It was found that EPS-605 was highly emissive in the aggregate state, such as powder and film. Furthermore, EPS-605 aqueous solutions exhibited concentration-enhanced emission characteristics. According to fluorescence spectra and confocal images, the fluorescence phenomenon of EPS-605 was not affected by the pH value and the carbon sources. The emission behavior of EPS-605 was attributed to the clustering-triggered emission (CTE) mechanism. Moreover, EPS-605 was successfully utilized for Fe3+ detection since its fluorescence could be selectively quenched by Fe3+. It could be used to detect Fe3+ with a low limit of detection (0.06 μM) and a wide detection range from 0.05 to 250 μM. Overall, these findings not only benefit the exploitation of EPS-based nonconventional biomacromolecule luminogens, but also reveal the potential applications of EPS-605 in biosensing/bioimaging, anticounterfeiting, and encryption owing to its excellent biocompatibility, environmental friendliness, and intrinsic photoluminescence property.

Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

Fluorescence sensing can not only identify a target substrate qualitatively but also achieve the purpose of quantitative detection through the change of the fluorescence signal. It has the advantages of immense sensitivity, rapid response, and excellent selectivity. The proposed aggregation-induced emission (AIE) concept solves the problem of the fluorescence of traditional fluorescent molecules becoming weak or quenched in high concentration or aggregated state conditions. Schiff base fluorescent probes have the advantages of simple synthesis, low toxicity, and easy design. They are often used for the detection of various substances. In this review we cover late developments in Schiff base compounds with AIE characteristics working as fluorescence sensors.

Hyperbranched Polyborate: A Non-conjugated Fluorescent Polymer with Unanticipated High Quantum Yield and Multicolor Emission

Non-conjugated fluorescent polymers have attracted great attention due to their excellent biocompatibility and environmental friendliness. However, it remains a huge challenge to obtain a polymer with high fluorescence quantum yield (QY) and multicolor emission simultaneously. Herein, we reported three kinds of nonaromatic hyperbranched polyborates (P1-P3) with multicolor emission, surprisingly, P2 also exhibits an unanticipated high QY (54.1 %). The natural bond orbital (NBO) analysis and density functional theory (DFT) calculation results revealed that the synergistic effect of rigid BO₃ planar and flexible carbon chain, as well as the through-space dative bond in supramolecular aggregate, were the key factors contributing to the ultrahigh QY of P2. Moreover, the applications of P2 in Fe³⁺ ions detection and cell imaging were also investigated. This work provides a new perspective for designing non-conjugated fluorescent polymers with both high QY and multicolor emission.

Anionic polymerization of nonaromatic maleimide to achieve full-color nonconventional luminescence

Nonconventional or nonconjugated luminophore without polycyclic aromatics or extended π-conjugation is a rising star in the area of luminescent materials. However, continuously tuning the emission color within a broad visible region via rational molecular design remains quite challenging because the mechanism of nonconventional luminescence is not fully understood. Herein, we present a new class of nonconventional luminophores, poly(maleimide)s (PMs), with full-color emission that can be finely regulated by anionic polymerization even at ambient temperature. Interestingly, the general characteristics of nonconventional luminescence, cluster-triggered emission, e.g., concentration-enhanced emission, are not observed in PMs. Instead, PMs have features similar to aggregation-caused quenching due to boosted intra/inter-molecular charge transfer. Such a biocompatible luminescent material synthesized from a low-cost monomer shows great prospects in large-scale production and applications, including security printing, fingerprint identification, metal ion recognition, etc. It also provides a new platform of rational molecular design to achieve full-color nonconventional luminescence without any aromatics.

Nonconventional luminophores without extended π-conjugation is a rising star in the area of luminescent materials but continuously tuning the emission color within a broad visible region via rational molecular design remains challenging. Here, the authors present poly(maleimide)s as a new class of nonconventional luminophores with fully tunable room temperature color emission that can be regulated by anionic polymerization

Tunable Photoluminescence Properties of Cotton Fiber With Gradually Changing Crystallinity

The alkali mercerizing process of semicrystalline cotton fiber (CF) is widely used in the printing and dyeing industry. The crystallinity change in the mercerizing process has been studied and certain laws have been obtained, but there is still a certain distance between the theoretical research results and the practical applications. CF is almost composed of cellulose, combined with the photoluminescence (PL) phenomenon of cellulose; herein, the varying crystallinity is correlated with its PL behavior after being treated with different concentrations of NaOH. In line with the characteristics of nonconventional luminogens, CF enjoys excitation-dependent emission and persistent room temperature phosphorescence (p-RTP) behavior. The emission spectra of all samples under the same excitation wavelength indicate that the change of CF crystallinity has a significant impact on its fluorescence and p-RTP emission. As the concentration of NaOH increases, the varying trend of quantum efficiency (QY) is consistent with the changed crystallinity of CF. Interestingly, the lifetime of p-RTP is exactly the opposite of the crystallinity change law. Clustering-triggered emission (CTE), crystallization-Induced Phosphorescence (CIP) mechanism, and the swelling due to hydrated sodium ions can reasonably explain these interesting photophysical processes, which also can be supported by theoretical calculations. The above studies have basically clarified the inherent law between the crystalline change of CF and the PL emission behavior during the alkali treatment process, which can be used as a theoretical reference for real-time monitoring of CF crystallinity changes using the spectral method in the actual cotton mercerizing process.

Guanine Analogue-Based Assemblies: Construction and Luminescence Functions

As one of the natural nucleobases, guanine has attracted increasing interest in molecular self-assembly science because of its abundant interaction sites and high electron cloud density. Guanines, guanine derivatives, and guanine-rich DNA sequence are able to self-assemble into versatile aggregate structures by the means of hydrogen bonds and π-π, ion-dipole, solvophobic, and electrostatic interactions. Recent advances have shown that many guanine analogue-based (G-based) luminescent aggregates exhibit promising applications for fluorescent and chemiluminescent sensing and circularly polarized luminescence (CPL). This perspective summarizes the state-of-art strategies for constructing G-based assemblies and presents representative examples for luminescence functions. Finally, the inspirations are provided for exploiting unique G-based systems and luminescent G-based assemblies.

Clustering emission of cucurbit[n]urils in the solid- and solution-state induced by the outer surface interactions of cucurbit[n]urils

Atypical luminescent compounds that do not contain conventional chromophores emit light due to clustering and have important basic research value and a broad range of potential applications. To date, most atypical luminescent compounds are small molecules or polymers containing groups such as cyano, carbonyl and hydroxyl. In this work, driven by some sporadic and accidental luminescence phenomena observed for cucurbit[n]urils (Q[n]s), the luminescent properties and mechanism of Q[n]s in the solid- and solution-state were systematically studied and the clustering emission of Q[n]s confirmed. Our experiments have revealed that the self-induced outer-surface interactions of Q[n]s (OSIQ) are the most important driving force resulting in the clustering emission of Q[n]s. Substances that can weaken the effect of self-induced OSIQ, such as the presence of various aromatic compounds and anions, may weaken or quench the clustering emission of Q[n]s. This not only reveals the new characteristics and mechanism of the clustering emission of Q[n]s, but also provides new insights on how to utilize the clustering emission of Q[n]s and construct new types of macrocyclic luminescence systems.

Room-Temperature Phosphorescence of Nicotinic Acid and Isonicotinic Acid: Efficient Intermolecular Hydrogen-Bond Interaction in Molecular Array

Pure organic room-temperature phosphorescence (RTP) has attracted wide interest due to its unique advantages and promising applications. However, it is still challenging to develop efficient RTP through precise molecular design. In this work, RTP is observed from two simple aromatic acids, nicotinic acid (NA) and isonicotinic acid (INA), in the crystal state. Single crystal structure analysis indicates that an intense hydrogen bond between the pyridine nitrogen atom and the carboxyl group results in zigzag and linear molecular packing modes in NA and INA crystal. From theoretical calculations, the hydrogen bond can effectively promote the intersystem crossing process and stabilize triplet exciton. The identical molecular orientations in the molecular array contribute to the larger dipole moment of INA as compared to that of NA, which should be responsible for the red-shifted photoluminescence and RTP of INA. When the hydrogen bond is destructed by grinding or deprotonation, the RTP decreases sharply, further confirming the crucial role of the hydrogen bond on RTP.

Role of Charged Amino Acids in Sullying the Fluorescence of Tryptophan or Conjugated Dansyl Probe in Monomeric Proteins

When Trp/dansyl probe conjugated to a monomeric protein is photoexcited, it is assumed that all emitted fluorescence originates solely from them. In this work, we show that hidden unconventional intrinsic chromophores (called ProCharTS) that originate from confined charge clusters in the protein can contaminate Trp/dansyl emission. Previous work has shown that charge recombination among charge-separated excited states of monomeric proteins, rich in charged residues, can emit weak luminescence (300-700 nm) overlapping with ProCharTS absorption (250-800 nm) and Trp (300-400 nm) and dansyl (400-600 nm) emission. We examine how this overlap taints the fluorescence arising from Trp/dansyl. We compared the effect of dense aqueous solutions of amino acids, Lys/Glu/Asp/Arg/His, on the fluorescence intensity decay/spectrum of N-acetyl-l-tryptophan amide (NATA). Significant broadening on the red side of Trp emission spectrum was observed solely in the presence of lysine, which appeared to be the most potent in altering the mono-exponential fluorescence decay of NATA. Interestingly, NATA in the presence of proteins α₃C and dehydrin (DHN1), which are rich in Lys residues, showed substantial deviation from mono-exponential fluorescence decay in contrast to PEST wt and Symfoil-4P pv2, which lack Lys residues. Remarkably, Trp emission spectra among charge-rich proteins like α₃W, PEST M1, and DHN1 CW1 were altered on the red side of Trp emission. Emission spectrum of dansyl-labeled human serum albumin (HuSA) was broadened and its fluorescence quenched with gradual addition of excess unlabeled HuSA, which displays bountiful ProCharTS luminescence. Our results unveil the additive influence of ProCharTS luminescence on Trp/dansyl emission with no measurable evidence of energy transfer.

Hydrated hydroxide complex dominates the AIE property of nonconjugated polymeric luminophores

Nontraditional intrinsic luminescence (NTIL) which always accompanied with aggregation-induced emission (AIE) features has received considerable attention due to their importance in the understanding of basic luminescence principle and potential practical applications. However, the rational modulation of the NTIL of nonconventional luminophores remains difficult, on account of the limited understanding of emission mechanisms. Herein, the emission colour of nonconjugated poly(methyl vinyl ether-alt-maleic anhydride) (PMVEMA) could be readily regulated from blue to red by controlling the alkalinity during the hydrolysis process. The nontraditional photoluminescence with AIE property was from the new formed p-band state, resulting from the strong overlapping of p orbitals of the clustered O atoms through space interactions. Hydrated hydroxide complexes embedded in the entangled polymer chain make big difference on the clustering of O atoms which dominates the AIE property of nonconjugated PMVEMA. These new insights into the photoluminescence mechanism of NTIL should stimulate additional experimental and theoretical studies and could benefit the molecular-level design of nontraditional chromophores for optoelectronics and other applications. This article is protected by copyright. All rights reserved.