Electronic effect on the optical properties and sensing ability of AIEgens with ESIPT process based on salicylaldehyde azine

Organoplatinum Complex Exhibiting Aggregation-Enhanced Emission (AEE) and Dual-Channel Ion-Sensing Properties by Terminating the Molecular Configuration Transformation (MCT) and Excited-State Intramolecular Proton Transfer (ESIPT)

Emitters produce weak emissions when they undergo structural changes such as molecular configuration transformation (MCT) or excited-state intramolecular proton transfer (ESIPT) but give out strong emissions after terminating these distortions. Herein, an organoplatinum complex, Pt-ppy-ABP, carrying a salicylaldehyde-based Schiff base unit is synthesized. It exhibits weak emission in dilute solutions but shows bright emission at the aggregated state or after interacting with F- and Zn2+. This suggests that it has an aggregation-enhanced emission (AEE) property and holds potential in ion detection. Supported by theoretical calculations and femtosecond transient absorption results, this complex suffers excited-state structural changes including MCT from a square-planar configuration to a tetrahedral one, as well as intramolecular rotation of a monodentate ligand and ESIPT, showing weak emission in its solutions. At the aggregated state, it releases strong yellow emissions because of the restraints of MCT and ligand rotation. Upon interacting with F- or Zn2+, it emits bright-red or -green emissions, achieving detection limits of 10-7 M. The sensing mechanism is concluded as deprotonation- and coordination-induced ESIPT terminations, respectively. Given its AEE property and ion-responsive emissions, its application in information encryption is also explored. Finally, these findings should provide valuable clues for the developments of chemosensors with dual-channel recognition abilities.

Multi-site isomerization of synergistically regulated stimuli-responsive AIE materials toward multi-level decryption

Stimuli-responsive aggregation-induced emission (AIE) materials are highly sensitive and rapidly responsive to external signals, making them ideal solid materials for anti-counterfeiting encryption. However, the limited conformational and packing variations resulting from regio-isomerization with a single substituent restricts the stimuli-responsive behavior of these materials. In this work, several AIE-active regio-structural isomers based on the salicylaldehyde Schiff base scaffold have been straightforwardly obtained through multiple substitutions with bromide and triphenylamine moieties. Solvent-effect experiments demonstrate their different orders of charge-transfer and excited-state intramolecular proton transfer upon photoexcitation, indicating the regulation of excited-state processes via multi-site isomerization. These isomers also demonstrate mechanochromism and acidichromism, allowing for adjustable stimuli-responsive effects. As a demonstration, p-Br-TPA with both mechanochromism and acidichromism can be synergistically utilized for multi-level decryption. This study successfully regulates the evolution of excited states through multi-site isomerization, offering a general approach for achieving tunable stimuli-responsive properties in AIE-active salicylaldehyde Schiff bases toward multi-level decryption.

Manipulation of excited-state intramolecular proton transfer by electron-donor substitution for high performance fluoride ions sensing

Excited-state intramolecular proton transfer (ESIPT) molecules has been using as a variety of functionalityled molecular systems. To investigate the relationship between the electron-donor substitution and luminescent properties of ESIPT luminogens, four 2-(2-hydroxyphenyl) benzothiazole derivatives with donor-π-acceptor (D-π-A)-structured were synthesized. The distinct fluorescence properties of them were found to be highly dependent on the electron-donor moiety (triphenylamine and anthracenyl), its substituent position (para and meta position) and solvent polarity. The M-TPA, P-En, and M-En showed ESIPT emission in organic solvents, while the P-TPA showed intramolecular charge transfer process (ICT) emission. It is due to the synergistic effect of the aggregation-induced emission (AIE) and ESIPT, that M-TPA and M-En exhibited high solid-state quantum yields and large Stokes shifts. They were used as a probe for detecting F-, which resulted in rapid colorimetric, high sensitivity and good selectivity. The M-TPA was a turn-on fluorescent probe, which had the best detection property, and the limit of detection was as low as 11 nM. Because M-TPA displayed phenol anion emission in DMSO and F- causes the deprotonation of the M-TPA, which led to significant red shift of the absorption band and enhancement of fluorescence emission. This work provides a reliable strategy for designing high-performance fluorescent sensor via ESIPT manipulation.

Proton coupled isomerization in double-hydrogen-bonding-center salicylaldehyde azine

The proton transfer dynamics of Schiff bases are of great importance due to the application potential. The excited state intramolecular proton transfer (ESIPT) of photochromic salicylaldehyde azine (SAA) in solutions was investigated by experimental and computational methods. Two distinguished spectral bands are observed in transient absorption spectra upon the photoexcitation with 400 nm. From the delayed stimulated emission signals, the ESIPT process is determined to be within <200 fs. Subsequently, the photoprotonated products undergo the vibrational relaxation with several picoseconds and the following isomerization with tens of picoseconds. These processes are significantly affected by the polarity of the solvents. The longest component with nanosecond scale can be explained to the relaxation to the enol structure. According to our observations, the SAA molecules with symmetric double-hydrogen-bonding-centers undergo single proton transfer rather than double proton transfer and subsequent intramolecular isomerization.

Cobalt Hydrogen-Bonded Organic Framework as a Visible Light-Driven Photocatalyst for CO2 Cycloaddition Reaction

A novel cobalt hydrogen-bonded organic framework (Co-HOF, C24H14CoN4O8) was synthesized from a mixed linker, that is, 2,5-pyridinedicarboxylic acid (PDC) and 2,2'-bipyridyl (BPY) linkers and cobalt ion through a simple, one-pot, low-cost, and scalable solvothermal method. The Co-HOF was fully characterized using several analytical and spectroscopic techniques including single-crystal X-ray diffraction, diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy. The Co-HOF exhibits high thermal and chemical stabilities compared to previously reported HOF materials. Moreover, Co-HOF shows excellent photocatalytic activity under visible light irradiation due to its narrow band gap of 2.05 eV. The cycloaddition reaction of CO2 to variable epoxides was investigated to evaluate the photocatalytic performance of Co-HOF under visible light radiation and was found to produce the corresponding cyclic carbonates in yields up to 99.9%.

An ESIPT solvatochromic fluorescent and colorimetric probe for sensitive and selective detection of copper ions in environmental samples and cell lines

Copper is one of the most important transition metals in our body for various physiological functions. An imbalance in the homeostasis of copper in our body can lead to various neurological disorders such as Alzheimer's disease, Parkinson's, and Menkes disease. As a result, there is a need for the detection of excess copper present in the environment and the human system. In this work, we have designed a quinoline-based fluorescent/colorimetric probe (QHS) for rapid and selective detection of copper ions via quenching of fluorescence/color change from yellow to peach which is visible to the naked eye. The probe displayed high selectivity towards copper(II), i.e., Cu(II) in the presence of different metal analytes in water samples. The sensing mechanism of the probe was confirmed by NMR, HRMS, IR spectroscopy, and SEM. The detection limit of Cu(II) ions was found to be 0.493 μM which is lower than the tolerable limit of copper (20 μM) in drinking water as per the EPA. The probe was also utilized for the visualization of Cu(II) in cell lines. The probe was also demonstrated for its application in real-time detection of aqueous samples using portable paper strips.

A caprylate esterase-activated fluorescent probe for sensitive and selective detection of Salmonella enteritidis

Salmonella enteritidis is one of the most common foodborne pathogens. Many methods have been developed to detect Salmonella, but most of them are expensive, time-consuming, and complex in experimental procedures. Developing a rapid, specific, cost-effective, and sensitive detection method is still demanded. In this work, a practical detection method is presented using salicylaldazine caprylate as the fluorescent probe, which could be hydrolyzed by caprylate esterase liberated from Salmonella lysed by phage, to form strong fluorescent salicylaldazine. The Salmonella could be detected accurately with a low limit of detection of 6 CFU/mL and a broad concentration range of 10-10⁶ CFU/mL. Moreover, this method was successfully used for the rapid detection of Salmonella in milk within 2 h through pre-enrichment by ampicillin-conjugated magnetic beads. The novel combination of fluorescent turn-on probe salicylaldazine caprylate and phage ensures this method has excellent sensitivity and selectivity.

Effect of a Substituent on the Properties of Salicylaldehyde Hydrazone Derivatives

The present study investigates the effect of the substitution of salicylaldehyde hydrazones at two selected positions, i.e., the para-position with regard to the proton-donating and proton-accepting centers forming the hydrogen bridge. A detailed analysis of structural data obtained by theoretical approaches and X-ray experiments, together with original resonance Hammett's constants, indicates that the strength of the intramolecular hydrogen bonding present in salicylaldehyde hydrazones can be selectively modulated by substitution of the parent molecular system with the chemical group of known π-electron-donating or -accepting properties. Our findings provide an insight into planning synthesis pathways for salicylaldehyde hydrazone species and predicting their result with regard to their H-bonding and related physical and chemical properties.

Spectroscopic characterization and assessment of microbiological potential of 1,3,4-thiadiazole derivative showing ESIPT dual fluorescence enhanced by aggregation effects

In the presented study, advanced experimental techniques, including electronic absorption and fluorescence spectroscopies [with Resonance Light Scattering (RLS)], measurements of fluorescence lifetimes in the frequency domain, calculations of dipole moment fluctuations, quantum yields, and radiative and non-radiative transfer constants, were used to characterize a selected analogue from the group of 1,3,4-thiadiazole, namely: 4-[5-(naphthalen-1-ylmethyl)-1,3,4-thiadiazol-2-yl]benzene-1,3-diol (NTBD), intrinsically capable to demonstrate enol → keto excited-states intramolecular proton transfer (ESIPT) effects. The results of spectroscopic analyses conducted in solvent media as well as selected mixtures were complemented by considering biological properties of the derivative in question, particularly in terms of its potential microbiological activity. The compound demonstrated a dual fluorescence effect in non-polar solvents, e.g. chloroform and DMSO/H₂O mixtures, while in polar solvents only a single emission maximum was detected. In the studied systems, ESIPT effects were indeed observed, as was the associated phenomenon of dual fluorescence, and, as demonstrated for the DMSO: H₂O mixtures, the same could be relatively easily induced by aggregation effects related to aggregation-induced emission (AIE). Subsequently conducted quantum-chemical (TD-)DFT calculations supported further possibility of ESIPT effects. The following article provides a comprehensive description of the spectroscopic and biological properties of the analyzed 1,3,4-thiadiazole derivatives, highlighting its potential applicability as a very good fluorescence probes as well as a compound capable of high microbiological activity.

Tale of COF-on-MOF Composites with Structural Regulation and Stepwise Luminescence Enhancement

Integrating metal-organic framework (MOF)-covalent organic framework (COF) allows versatile engineering of hybrid materials with properties superior to pristine components, especially COFs suffered from aggregation-caused quenching (ACQ), unlocking more possibilities to improve the luminescence of COFs. In this work, we prepared various MOF@COF composites with different COF layer thicknesses, in which stable UiO-66-NH₂ served as the inner substrate and 1,3,5-benzenetricarboxaldehyde (BT), and 3,3'-dihydroxybenzidine (DH) were used to construct a COF layer. In addition to the conventional preparation method, we increased the ratio of BT and DH to be 1:2.5, and impressively, the morphologies of acquired UC (1:2.5) materials were quite different from the previous reticular structure and gradually extended from the spherical structure to the prickly structure with the increase of COF monomers. Remarkably, all of the UC materials possessed better luminescence properties than individual COF due to the limited COF layers. Meanwhile, UC-1 materials with an optimal COF layer displayed the strongest emission. In comparison with a single COF, the quantum yields of UC-1 and UC-1 (1:2.5) were increased nearly 7 times and 5 times, respectively. Moreover, the fluorescence of UC-1 materials was progressively enhanced via selective F^- sensing. This work is expected to shed light on the potential hybridization of MOF-COF with structural adjustment, morphological design, and luminescence enhancement.

Excited State Intramolecular Proton Transfer (ESIPT) from -NH2 to the Carbon Atom of a Naphthyl Ring

Excited state intramolecular proton transfer (ESIPT) has been documented from an amino NH₂ group to a carbon atom of an adjacent aromatic ring. This finding changes the paradigm, as hitherto such processes have not been considered as plausible due to slow protonation of carbon and low (photo)acidity of the NH₂ group. The ESIPT was studied by irradiation of 2-(2-aminophenyl)naphthalene in CH₃CN-D₂O, whereupon regiospecific incorporation of deuterium takes place at the naphthalene position 1, with a quantum yield of Φ = 0.11. A synergy of experimental and computational investigations completely unraveled the mechanism of this important photochemical reaction. Upon excitation to the photoreactive S₂(L_a) state, a favorable redistribution of charge sets the stage for ESIPT to the carbon atom in naphthalene position 1. H₂O molecules are needed, as they increase the excitation energy and oscillator strength for the population of the S₂(L_a) state. The gain in energy is used to surmount a small energy barrier on the pathway from the Franck-Condon geometry to the conical intersection with the S₀, delivering aza-quinone methide.

Near-Infrared multifunctional theranostic agent with Wave-Like aggregates modulated by substituent position effect

Precise design of organic photosensitizers (PSs) promoted the technological innovation for multimodal imaging-guided synergistic therapy. Nonetheless, various group substitution could not only optimize the basic photophysical behavior, but possibly change the aggregate, which handicaps the deep understanding of the "Formula-Aggergete-Property" relationship. Bearing this in mind, herein two isomers, named 6-TDE and 7-TDE, were prepared via substituting position modification. Among them, 6-TDE exhibited the grid-like structure, while 7-TDE presented wavy-like structure. Despite the aggregates were different, 6-TDE and 7-TDE shared common features including partly twisted backbone and non-overlapped-orbit, hence resulting in similar optical physical behavior such as decent extinction coefficient, near-IR emission, large stockes shifts, etc. Meanwhile, though two PSs could both generated Type-I and Type-II ROS, 7-TDE possessed smaller singlet-triplet splitting (ΔE_ST), which exhibited favorable ROS as well as outstanding mitochondrial targeting, achieving efficient photodynamic therapy (PDT) effect. During this process, mitochondrial autophagy could be tracked and observed effectively and in real-time. Moreover, 7-TDE presented outstanding performance in multimodal imaging, including fluorescence imaging (FLI), photoacousticimaging (PAI) and photothermal imaging (PTI). This study enriches the strategy of precise molecular engineering to optimize theranostic agents.

Visualising the Emerging Platform of Using Microalgae as a Sustainable Bio-Factory for Healthy Lipid Production through Biocompatible AIE Probes

Nowadays, a particular focus is using microalgae to get high-valued health beneficiary lipids. The precise localisation of the lipid droplets (LDs) and biochemical changes are crucial to portray the lipid production strategy in algae, but it requires an in vivo tool to rapidly visualise LD distribution. As a novel strategy, this study focuses on detecting lipid bioaccumulation in a green microalga, Chlamydomonas reinhardtii using the aggregation-induced emission (AIE) based probe, 2-DPAN (C24H18N2O). As the messenger molecule and stress biomarker, hydrogen peroxide (H2O2) activity was detected in lipid synthesis with the AIE probe, TPE-BO (C38H42B2O4). Distinctive LDs labelled with 2-DPAN have elucidated the lipid inducing conditions, where more health beneficiary α-linolenic acid has been produced. TPE-BO labelled H2O2 have clarified the involvement of H2O2 during lipid biogenesis. The co-staining procedure with traditional green BODIPY dye and red chlorophyll indicates that 2-DPAN is suitable for multicolour LD imaging. Compared with BODIPY, 2-DPAN was an efficient sample preparation technique without the washing procedure. Thus, 2-DPAN could improve traditional fluorescent probes currently used for lipid imaging. In addition, the rapid, wash-free, multicolour AIE-based in vivo probe in the study of LDs with 2-DPAN could advance the research of lipid production in microalgae.

Strategic Substitution of -OH/-NR2 (R=Et, Me) Imparts Colorimetric Switching between F- and Hg2+ by Salicyaldehyde/Benzaldehyde-Quinoxaline Conjugates

We herein report two salicyaldehyde-quinoxaline (HQS and HQSN) conjugates and a benzaldehyde-quinoxaline (QBN) conjugate to fabricate selective chemosensors for F^- and Hg²⁺ in the micromolar range. This work demonstrates how sensing outcomes are affected by modulating proton acidity by introducing an electron donating group, -NEt₂ , in the probe backbone. Interestingly, the un-substituted probe HQS can selectively detect F^- , whereas HQSN and QBN are selective for Hg²⁺ . In order to gain insights into the mechanism of sensing, geometry optimizations have been carried out on QS^(-1) , QS^(-1) ⋅⋅⋅HF, QSN^(-1) and QSN^(-1) ⋅⋅⋅HF and the experimental data are validated in terms of free energy and pK_a values. Detailed DFT and TD-DFT analyses provide ample support towards the mechanism of sensing of the analytes.

Aggregation-Induced Emission-Active Fluorescent Polymer: Multi-Targeted Sensor and ROS Scavenger

A multi-functional polymer with aggregation-induced emission (AIE)-active salicylaldehyde azine (SA) functionality and reactive oxygen species (ROS)-responsive thioether groups is readily prepared via thiol-ene click polymerization of SA derivative diacrylate monomer, poly(ethylene glycol) diacrylate, and 3,6-dioxa-1,8-octanedithiol. The obtained AIE-active polymer exhibited an unexpected strong emission in amide solvents compared to that in other common organic solvents that was dramatically decreased by adding a trace amount of water, suggesting that the polymer could be utilized as a water trace indicator in amide solvents. In the backbone, the PEG segments make the polymer well dispersed in water and the ROS-responsive thioether groups enable this polymer as a promising ROS scavenger, with embedded SA moieties as a fluorescent indicator for the hemolysis determination. Due to the ability of SA moieties to complex with Cu²⁺, this AIE polymer can also be utilized as a fluorescent sensor for selective Cu²⁺ detection in real-world water samples. Thus, this multi-functional polymer is anticipated to be well applied in biological and environmental applications.

Rational construction of AIEgens with wide color tunability and their specific lipid droplet imaging applications

Organic light-emitting materials with aggregation-induced emission (AIE) character have experienced a rapid development in imaging, visualization and sensing. In this paper, by installing rotors to an aggregation-caused quenching (ACQ) compound, we constructed an AIE luminogen (AIEgens) system (A2-A4, B1-B3) with wide emission tunability, which covers almost all regions of visible light (400-780 nm). The calculated energy gap of the compounds is consistent with the value of the absorption transition. In the biological experiments, B3 showed excellent lipid droplet (LD) targeting ability in PC12 cells, and higher photostability compared with the commercial LDs bioprobe. Moreover, as a hydrophobic compound, B3 can distinguish blood from a hyperlipidemia patient and normal people. Thus, this study provides a strategy to construct red/NIR fluorescent materials with AIE character, and further apply it to identify the blood of people with hyperlipidemia.

Fabricating a fluorescence resonance energy transfer system with AIE molecular for sensitive detection of Cu(II) ions

The aggregation-induced emission (AIE) luminogens has exhibited strong potential in fabricating the fluorescence resonance energy transfer (FRET) system. In this paper one efficient FRET system was fabricated in aqueous solution based on an AIE molecular (T) and Nile Red (NiR) dyes: T acts as the energy donor and NiR acts as the energy acceptor with a ratio of 250:1. The energy-transfer efficiency from the donor to acceptor is 82.52%, and the antenna effect is 24.9. Base on this data, a very low detection limit for Cu²⁺ was calculated to be 35.5 pM. This method displays penitential application on fluorescence probe for small ions or molecular detection by light-harvesting system based on a simple AIE donor under physiological conditions.

Visualizing Dynamic Performance of Lipid Droplets in a Parkinson's Disease Model via a Smart Photostable Aggregation-Induced Emission Probe

Parkinson’s disease (PD) is a complex neurodegenerative disease affected by diverse factors, and lipid droplets (LDs) are increasingly recognized as major players in PD because of their relevance to neuron activity. However, long-term dynamic changes of LDs and their relative activity remain unclear. Here, an aggregation-induced emission (AIE) probe named 2-DPAN was prepared and employed to visualize dynamic processes of LDs in a 6-hydroxydopamine model of PD for the first time, and LDs' accumulation-peak/plateau-decrease were confirmed. We further found a close relationship between LDs and variation in mitochondrial activity. Strikingly, the progression of cell death was accelerated by lipase, whereas pre-stimulation of LDs by unsaturated fatty acid-oleic acid decreased the death process by inhibiting excessive reactive oxygen species (ROS) and fatty acid production, thereby protecting mitochondria. The utilization of 2-DPAN demonstrates the importance of LDs in neuronal homeostasis, and effective tuning of LDs may prevent or inhibit PD progression.

•

2-DPAN monitors the dynamic changes of Lipid droplets (LDs) in Parkinson disease

•

LDs' dynamic change process including three phases, accumulation-plateau-decrease

•

LDs' change trend was highly correlated with mitochondrial disruption

•

Efficient tuning of LDs could slow the PD progress

A stable AIEgen cis-diarylethene-based ‘ESIPT’ benchmark

A stable AIEgen locked by the seven-membered ring hydrogen bond and steric hindrance which made ‘ESIPT’ take place. It features a highly fluorescence in aggregate and solid states and large Stokes shift in solution.

Aggregation-Induced Emission Luminogens: Union Is Strength, Gathering Illuminates Healthcare

The rapid development of healthcare techniques encourages the emergence of new molecular imaging agents and modalities. Fluorescence imaging that enables precise monitoring and detection of biological processes/diseases is extensively investigated as this imaging technique has strengths in terms of high sensitivity, excellent temporal resolution, low cost, and good safety. Aggregation-induced emission luminogens (AIEgens) have recently emerged as a new class of emitters that possess several notable features, such as high brightness, large Stokes shift, marked photostability, good biocompatibility, and so on. So far, AIEgens are widely explored and exhibit superb performance in the area of biomedicine and life sciences. Herein, this review summarizes and discusses the recent investigations of AIEgens for in vivo diagnosis and therapy including long-term tracking, 3D angiography, multimodality imaging, disease theranostics, and activatable sensing. Collectively, these results reveal that AIEgens are of great promise for in vivo biomedical applications. It is hoped that this review will lead to new insights into the development of advanced healthcare materials.