Assemblies of covalent organic framework microcrystals: multiple-dimensional manipulation for enhanced applications

2D Covalent Organic Framework for Water Harvesting with Fast Kinetics and Low Regeneration Temperature

Atmospheric water harvesting represents a promising technique to address water stress. Advanced adsorbents have been rationally designed to achieve high water uptake, yet their water sorption kinetics and regeneration temperature greatly limit water production efficiency. Herein, we demonstrated that 2D covalent organic frameworks (COFs), featuring hydrophobic skeleton, proper hydrophilic site density, and 1D open channels significantly lowered the water diffusion and desorption energy barrier. DHTA-Pa COF showed a high water uptake of 0.48 g/g at 30 % R.H. with a remarkable adsorption rate of 0.72 L/Kg/h (298 K) and a desorption rate of 2.58 L/Kg/h (333 K). Moreover, more than 90 % adsorbed water could be released within 20 min at 313 K. This kinetic performance surpassed the reported porous materials and boosted the efficiency for multiple water extraction cycles. It may shed light on the material design strategy to achieve high daily water production with low-energy input.

Integrated carbon nanotube and triazine-based covalent organic framework composites for high capacitance performance

As a rising class of crystallographic organic polymers, covalent-organic frameworks (COFs) have high specific surface areas, ordered pore structures, and designability, which exhibit broad application prospects in the energy storage sector. However, their low electrical conductivity hinders their potential use in supercapacitors. To improve the electrical conductivity, we introduced carboxylated multi-walled carbon nanotubes to obtain a series of carbon nanotube@COF composites by a facile one-pot method, in which 2D TFA-COFs are in situ grown on the surface of carboxylated multi-walled carbon nanotubes. Among them, the CNT@TFA-COF-3 composite exhibits good crystallinity, regular pores, excellent stability and a specific surface area of 1034 m² g^-1. As expected, as a capacitive electrode material, the CNT@TFA-COF composite shows improved electrochemical performance. Notably, the value of specific capacitance of the CNT@TFA-COF-3 composite (338 F g^-1) is about 8.5, 4.9, and 7.5 times higher than those of TFA-COFs, CNTs, and the CNT/TFA-COF physically mixed complex at a current density of 1.0 A g^-1, respectively. Furthermore, the CNT@TFA-COF-3 supercapacitor exhibits long-term cycle chemical stability and splendid rate capability even after 7000 charge-discharge cycles. The successful preparation of the CNT@TFA-COF-3 composite can provide new ideas for the construction of new COF-based composites and the development of new materials for energy storage.

Carbon Dioxide Conversion Upgraded by Host-guest Cooperation between Nitrogen-Rich Covalent Organic Framework and Imidazolium-Based Ionic Polymer

The chemical conversion of CO₂ into value-added chemicals is one promising approach for CO₂ utilization. It is crucial to explore highly efficient catalysts containing task-specific components for CO₂ fixation. Here, a host-guest catalytic system was developed by integrating nitrogen-rich covalent organic framework (TT-COF) and imidazolium-based ionic polymer (ImIP), which serve as hydrogen-bonding donor and nucleophilic agent, respectively, for cooperatively facilitating the activation of the epoxides and subsequent CO₂ cycloaddition. The catalytic activity of the host-guest system was remarkably superior to those of ImIP, TT-COF, and their physical mixture. Furthermore, selective adsorption for CO₂ over N₂ rendered this catalytic system effective for the cycloaddition reaction of the simulated flue gas. The protocols for the unification of two catalytically active components provide new opportunities for the development of composite systems in multiple applications.

Fabrication of edge-curled petals-like covalent organic frameworks and their properties for extracting indole alkaloids from complex biological samples

In this study, a functionalized covalent-organic framework (COF) was first synthesized using porphyrin as the fabrication unit and showed an edge-curled, petal-like and well-ordered structure. The synthesized COF was then introduced to prepare porous organic polymer monolithic materials (POPMs). Two composite POPM/COF monolithic materials with rod shapes, referred to as sorbent A and sorbent B, were prepared in stainless steel tubes using different monomers. Sorbents A and B exhibited relatively uniform porous structures and enhanced specific surface areas of 153.14 m²/g and 80.01 m²/g, respectively. The prepared composite monoliths were used as in-tube solid-phase extraction (SPE) sorbents combined with HPLC for the on-line extraction and quantitative analytical systems. Indole alkaloids (from Catharanthus roseus G. Don and Uncaria rhynchophylla (Miq.) Miq. Ex Havil.) contained in mouse plasma were extracted and quantitatively analyzed using the online system. The two composite multifunctional monoliths showed excellent clean-up ability for complex biological matrices, as well as superior selectivity for target indole alkaloids. Method validation showed that the RSD values of the repeatability (n=6) were ≤ 3.46%, and the accuracy expressed by the spiked recoveries was in the ranges of 99.38%–100.91% and 96.39%–103.50% for vinca alkaloids and Uncaria alkaloids, respectively. Furthermore, sorbents A and B exhibited strong reusability, with RSD values ≤ 5.32%, which were based on the peak area of the corresponding alkaloids with more than 100 injections. These results indicate that the composite POPM/COF rod-shaped monoliths are promising media as SPE sorbents for extracting trace compounds in complex biological samples.

•

Edge-curled petals-like COF was synthesized using porphyrin as the fabrication unit.

•

In-tube monolithic POMP/COF composite SPE sorbents with rod-shape were fabricated.

•

The in-tube sorbents were used to extract hence indole alkaloids from complex samples.

•

The two homemade sorbents show strong reusability of more than 100 times.

Aggregation-Induced Enhanced Emission (AIEE)-Active Conjugated Mesoporous Oligomers (CMOs) with Improved Quantum Yield and Low-Cost Detection of a Trace Amount of Nitroaromatic Explosives

The article reports a straightforward strategy for the design and synthesis of highly luminescent conjugated mesoporous oligomers (CMOs) with an "aggregation-induced enhanced emission" (AIEE) feature through Wittig polymerization of a molecular rotor. Typical molecular rotors such as triphenylamine (TPA) and tetraphenylethene (TPE) as B2-, and A4- and A3-type nodes have been used to construct AIEE-active CMOs, namely, CMO1 and CMO2. The quick dissipation of the excited photons is successfully controlled by the restriction of rotation of the phenyl units through the formation of a mesoporous network scaffold in a solid/thin film, which provides high quantum yields for the interlocked CMO system. Both the CMOs are sensitive and selective to the various nitroaromatic explosives, whereas CMO1 is more sensitive (K_sv = 2.6 × 10⁶ M^-1) toward picric acid. The increased quenching constant for CMO1 is due to its increased quantum yield and high energy-transfer efficiency. The mechanism for sensing has been studied in detail. The larger pore size and pore density in the mesoporous network of CMO1 are found to be responsible for the greater extent of energy transfer from CMO1 to picric acid. Furthermore, CMO1 has been employed for low-cost filter-paper-based detection of a trace amount of nitroaromatic explosive materials.

Porous Ru(bpy)32+-Linked Polymers for Recyclable Photocatalysis of Enantioselective Alkylation of Aldehydes

Two metal porous organic polymers (POPs) that contain the [Ru(bpy)₃]²⁺ cores are prepared via one-pot Suzuki-Miyaura coupling reactions. Both Ru-POPs are thermally stable at up to 340 °C in air and do not dissolve in all solvents tested. One of the POPs has been revealed to be highly effective and reusable as a heterogeneous photocatalyst for visible light-driven enantioselective alkylation of aldehydes. After 10 cycles, the catalyst still maintains the enantioselectivity, while the activity just decreases slightly.

Water-Soluble 3D Covalent Organic Framework that Displays an Enhanced Enrichment Effect of Photosensitizers and Catalysts for the Reduction of Protons to H2

Covalent organic frameworks (COFs) are emerging porous polymers that have 2D or 3D long-range ordering. Currently available COFs are typically insoluble or decompose upon dissolution, which remarkably restricts their practical implementations. For 3D COFs, the achievement of noninterpenetration, which maximizes their porosity-derived applications, also remains a challenge synthetically. Here, we report the synthesis of the first highly water-soluble 3D COF (sCOF-101) from irreversible polymerization of a preorganized supramolecular organic framework through cucurbit[8]uril (CB[8])-controlled [2 + 2] photodimerization. Synchrotron X-ray scattering and diffraction analyses confirm that sCOF-101 exhibits porosity periodicity, with a channel diameter of 2.3 nm, in both water and the solid state and retains the periodicity under both strongly acidic and basic conditions. As an ordered 3D polymer, sCOF-101 can enrich [Ru(bpy)₃]²⁺ photosensitizers and redox-active polyoxometalates in water, which leads to remarkable increase of their photocatalytic activity for proton reduction to produce H₂.

Heteropore covalent organic frameworks: a new class of porous organic polymers with well-ordered hierarchical porosities

This review highlights the development of heteropore covalent organic frameworks, a new class of porous organic polymers which exhibit well-ordered heterogeneous/hierarchical porosities.

Facile synthesis of novel porous self-assembling hydrogen-bonding covalent organic polymers and their applications towards fluoroquinolone antibiotics adsorption

A series of porous hydrogen-bonding covalent organic polymers (H_COPs) have been synthesized based on three-composite building blocks through a quick and succinct method for fluoroquinolone antibiotics adsorption from aqueous solutions. The porous properties of the H_COPs were regulated and controlled by adjusting the lengths of linkers, and the crystallinity and stability were strengthened due to the introduction of hydrogen bonds in H_COPs. Taking advantage of the porous properties and π-conjugated phenyl rings, as well as functional –CO–NH– and –COOH groups, H_COPs removed organic pollutants from wastewater effectively and showed good reusability. The external adsorption behavior was analyzed using both kinetic analysis and isotherm analysis. The results showed that the adsorption obeys the pseudo-second order kinetic model and follows the Langmuir isotherm model. The obtained maximum adsorption capacity of the four H_COPs was arranged in sequence according to the specific surface areas and pore sizes. Furthermore, the internal mechanisms involving perforated porousness, electrostatic interaction, hydrophobic interaction, π–π electron-donor–acceptor (EDA) interaction and hydrogen bonding formation, were investigated in detail. We envisage broadly applying the H_COPs in the facile and effective management of environmental pollution.

A series of porous hydrogen-bonding covalent organic polymers (H_COPs) have been synthesized based on three-composite building blocks through a quick and succinct method for fluoroquinolone antibiotics adsorption from aqueous solutions.