Genetically engineered organisms for bioremediation of pollutants in contaminated sites

Nano-biogenic heavy metals adsorptive remediation for enhanced soil health and sustainable agricultural production

Hazardous heavy metal (HM) pollution constitutes a pervasive global challenge, posing substantial risks to ecosystems and human health. The exigency for expeditious detection, meticulous monitoring, and efficacious remediation of HM within ecosystems is indisputable. Soil contamination, stemming from a myriad of anthropogenic activities, emerges as a principal conduit for HM ingress into the food chain. Traditional soil remediation modalities for HM elimination, while effective are labor-intensive, susceptible to secondary contamination, and exhibit limited efficacy in regions characterized by low metal toxicity. In response to these exigencies, the eco-friendly paradigm of bioremediation has garnered prominence as a financially judicious and sustainable remedial strategy. This approach entails the utilization of hyperaccumulators, Genetically Modified Microorganisms (GMM), and advantageous microbes. The current review offers a comprehensive elucidation of cutting-edge phyto/microbe-based bioremediation techniques, with a specific emphasis on their amalgamation with nanotechnology. Accentuating their pivotal role in advancing sustainable agricultural practices, the review meticulously dissects the synergistic interplay between plants and microbes, underscoring their adeptness in HM remediation sans secondary contamination. Moreover, the review scrutinizes the challenges intrinsic to implementing bioremediation-nanotechnology interface techniques and propounds innovative resolutions. These discernments proffer auspicious trajectories for the future of agriculture. Through the environmentally conscientious marvels of phyto/microbe bioremediation, an optimistic outlook emerges for environmental preservation and the cultivation of a sustainable, salubrious planet via the conduit of cleaner agricultural production.

Poor Respiratory Health is a Consequence of Dhaka's Polluted Air: A Bangladeshi Perspective

Dhaka, which is the capital and largest metropolis of Bangladesh, has seen an increase in the number of documented cases of respiratory disorders. Every day in Dhaka city, a remarkable number of patients are being diagnosed with poor respiratory conditions. The majority of these patients have no other severe disease history and mostly need to be exposed to outdoor air to meet their occupational requirements, indicating that the ailment may be associated with polluted air. As this is the most pressing issue that must be addressed in order to safeguard public health, we have made an effort to focus on the current situation surrounding the sources of air pollution in the city. Since this is a viewpoint article, we gathered data from various published articles, national dailies, and international reports generated by WHO, CDC, BBC, or other environmental news/report portals to highlight the public health issue related to respiratory health. Poor respiratory health is one of the main consequences of Dhaka's contaminated air, as determined by our analysis.

Recent Advances in Microbial-Assisted Remediation of Cadmium-Contaminated Soil

Soil contamination with cadmium (Cd) is a severe concern for the developing world due to its non-biodegradability and significant potential to damage the ecosystem and associated services. Industries such as mining, manufacturing, building, etc., rapidly produce a substantial amount of Cd, posing environmental risks. Cd toxicity in crop plants decreases nutrient and water uptake and translocation, increases oxidative damage, interferes with plant metabolism and inhibits plant morphology and physiology. However, various conventional physicochemical approaches are available to remove Cd from the soil, including chemical reduction, immobilization, stabilization and electro-remediation. Nevertheless, these processes are costly and unfriendly to the environment because they require much energy, skilled labor and hazardous chemicals. In contrasting, contaminated soils can be restored by using bioremediation techniques, which use plants alone and in association with different beneficial microbes as cutting-edge approaches. This review covers the bioremediation of soils contaminated with Cd in various new ways. The bioremediation capability of bacteria and fungi alone and in combination with plants are studied and analyzed. Microbes, including bacteria, fungi and algae, are reported to have a high tolerance for metals, having a 98% bioremediation capability. The internal structure of microorganisms, their cell surface characteristics and the surrounding environmental circumstances are all discussed concerning how microbes detoxify metals. Moreover, issues affecting the effectiveness of bioremediation are explored, along with potential difficulties, solutions and prospects.

The potential of microorganisms as biomonitoring and bioremediation tools for mercury-contaminated soils

Mercury (Hg) pollution is a global issue due to the high toxicity and wide dispersion of Hg around the world. Whether due to anthropogenic activities or natural processes, Hg emissions are steadily increasing, with very high levels in some regions, directly threatening human and ecosystem health. However, bacteria and fungi have evolved and adapted in response to Hg-induced stress and have developed tolerance mechanisms, notably based on the mer operon system that is involved in Hg uptake and biovolatilization via Hg reduction reactions. Other processes, such as bioaccumulation or extracellular sequestration, are involved in Hg resistance, and the study of contaminated soils has allowed the isolation of a number of microorganisms capable of these mechanisms, with strong potential for the implementation of bioremediation approaches. In addition to playing an important role in determining the fate of Hg in the biogeochemical cycle, these microorganisms can indeed be applied to reduce Hg concentrations or at least stabilize Hg for the remediation of polluted soils. Moreover, thanks to the development of biotechnological tools, bioremediation based on Hg-tolerant microorganisms can be optimized. Finally, these microorganisms are relevant candidates for biomonitoring, for example, through the engineering of biosensors, because the detection of Hg is a major issue in preserving the health of living beings.

Bioaccumulation and Bioremediation of Heavy Metals in Fishes-A Review

Heavy metals, the most potent contaminants of the environment, are discharged into the aquatic ecosystems through the effluents of several industries, resulting in serious aquatic pollution. This type of severe heavy metal contamination in aquaculture systems has attracted great attention throughout the world. These toxic heavy metals are transmitted into the food chain through their bioaccumulation in different tissues of aquatic species and have aroused serious public health concerns. Heavy metal toxicity negatively affects the growth, reproduction, and physiology of fish, which is threatening the sustainable development of the aquaculture sector. Recently, several techniques, such as adsorption, physio-biochemical, molecular, and phytoremediation mechanisms have been successfully applied to reduce the toxicants in the environment. Microorganisms, especially several bacterial species, play a key role in this bioremediation process. In this context, the present review summarizes the bioaccumulation of different heavy metals into fishes, their toxic effects, and possible bioremediation techniques to protect the fishes from heavy metal contamination. Additionally, this paper discusses existing strategies to bioremediate heavy metals from aquatic ecosystems and the scope of genetic and molecular approaches for the effective bioremediation of heavy metals.

Improvements in Bioremediation Agents and Their Modified Strains in Mediating Environmental Pollution

Environmental pollution has been a significant concern around the globe as the release of toxic pollutants is associated with carcinogenic, mutagenic, and teratogenic impacts on living organisms. Since microorganisms have the natural potential to degrade toxic metabolites into nontoxic forms, an eco-friendly approach known as bioremediation has been used to tackle toxic-induced pollution. Bioremediation has three fundamental levels, i.e., natural attenuation, bio-augmentation, and biostimulation in which the synthetic biology approach has been lately utilized to enhance the conventional bioremediation techniques. Recently, a more advanced approach of programmable nucleases such as zinc finger nucleases, tale-like effector nucleases, and clustered regularly interspaced short palindromic repeats Cas is being employed to engineer several bacterial, fungal, and algal strains for targeted mutagenesis by knocking in and out specific genes which are involved in reconstructing the metabolic pathways of native microbes. These genetically engineered microorganisms possess heavy metal resistance, greater substrate range, enhanced enzymatic activity, and binding affinity which accelerate the biodegradation of toxic pollutants to environmentally safe levels. This review provides a comprehensive understanding of how we can correlate the novel genetics-based approaches employed to produce genetically engineered microorganisms to enhance the biodegradation of hazardous pollutants, hence, developing a clean and sustainable ecosystem.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

Significance of microbial genome in environmental remediation

Environmental pollutants seriously threaten the ecosystem and health of various life forms, particularly with the rapid industrialization and emerging population. Conventionally physical and chemical strategies are being opted for the removal of these pollutants. Bioremediation, through several advancements, has been a boon to combat the existing threat faced today. Microbes with enzymes degrade various pollutants and utilize them as a carbon and energy source. With the existing demand and through several research explorations, Genetically Engineered Microorganisms (GEMs) have paved to be a successful approach to abate pollution through bioremediation. The genome of the microbe determines its biodegradative nature. Thus, methods including pure culture techniques and metagenomics are used for analyzing the genome of microbes, which provides information about catabolic genes. The information obtained along with the aid of biotechnology helps to construct GEMs that are cost-effective and safer thereby exhibiting higher degradation of pollutants. The present review focuses on the role of microbes in the degradation of environmental pollutants, role of evolution in habitat and adaptation of microbes, microbial degenerative genes, their pathways, and the efficacy of recombinant DNA (rDNA) technology for creating GEMs for bioremediation. The present review also provides a gist of existing GEMs for bioremediation and their limitations, thereby providing a future scope of implementation of these GEMs for a sustainable environment.

Petroleum Hydrocarbon Catabolic Pathways as Targets for Metabolic Engineering Strategies for Enhanced Bioremediation of Crude-Oil-Contaminated Environments

Anthropogenic activities and industrial effluents are the major sources of petroleum hydrocarbon contamination in different environments. Microbe-based remediation techniques are known to be effective, inexpensive, and environmentally safe. In this review, the metabolic-target-specific pathway engineering processes used for improving the bioremediation of hydrocarbon-contaminated environments have been described. The microbiomes are characterised using environmental genomics approaches that can provide a means to determine the unique structural, functional, and metabolic pathways used by the microbial community for the degradation of contaminants. The bacterial metabolism of aromatic hydrocarbons has been explained via peripheral pathways by the catabolic actions of enzymes, such as dehydrogenases, hydrolases, oxygenases, and isomerases. We proposed that by using microbiome engineering techniques, specific pathways in an environment can be detected and manipulated as targets. Using the combination of metabolic engineering with synthetic biology, systemic biology, and evolutionary engineering approaches, highly efficient microbial strains may be utilised to facilitate the target-dependent bioprocessing and degradation of petroleum hydrocarbons. Moreover, the use of CRISPR-cas and genetic engineering methods for editing metabolic genes and modifying degradation pathways leads to the selection of recombinants that have improved degradation abilities. The idea of growing metabolically engineered microbial communities, which play a crucial role in breaking down a range of pollutants, has also been explained. However, the limitations of the in-situ implementation of genetically modified organisms pose a challenge that needs to be addressed in future research.

Engineering microbes for enhancing the degradation of environmental pollutants: A detailed review on synthetic biology

Anthropogenic activities resulted in the deposition of huge quantities of contaminants such as heavy metals, dyes, hydrocarbons, etc into an ecosystem. The serious ill effects caused by these pollutants to all living organisms forced in advancement of technology for degrading or removing these pollutants. This degrading activity is mostly depending on microorganisms owing to their ability to survive in harsh adverse conditions. Though native strains possess the capability to degrade these pollutants the development of genetic engineering and molecular biology resulted in engineering approaches that enhanced the efficiency of microbes in degrading pollutants at faster rate. Many bioinformatics tools have been developed for altering/modifying genetic content in microbes to increase their degrading potency. This review provides a detailed note on engineered microbes - their significant importance in degrading environmental contaminants and the approaches utilized for modifying microbes. The genes responsible for degrading the pollutants have been identified and modified fir increasing the potential for quick degradation. The methods for increasing the tolerance in engineered microbes have also been discussed. Thus engineered microbes prove to be effective alternate compared to native strains for degrading pollutants.

Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.

Mechanism of Microbial Detoxification of Heavy Metals: A Review

Heavy metal contamination from anthropogenic activities has an adverse effect on the environment due to its cytotoxicity, carcinogenicity and mutagenicity. Environment harbours microorganisms, some of which have been found to modify physico-chemical conditions of their surrounding environment through certain processes such as detoxification, metal homeostasis, precipitation, redox transformations etc. Investigations in the past have shown that short term contact with metals of certain bacteria causes the selection of resistant bacteria within weeks, while a prolonged exposure showed selected strains able to thrive better. Hence biotic methods could assist removal of heavy metals based on biosorption or bioaccumulation by microorganisms, which are cost-effective and environmental friendly in the long run. Microbial remediation is influenced by biotic and environmental factors as also the contamination site characteristics. The aim of this paper is to highlight and review some of the mechanisms of microbial remediation through techniques such as biostimulation, bioaugmentation etc.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Microbial Interventions in Bioremediation of Heavy Metal Contaminants in Agroecosystem

Soil naturally comprises heavy metals but due to the rapid industrialization and anthropogenic events such as uncontrolled use of agrochemicals their concentration is heightened up to a large extent across the world. Heavy metals are non-biodegradable and persistent in nature thereby disrupting the environment and causing huge health threats to humans. Exploiting microorganisms for the removal of heavy metal is a promising approach to combat these adverse consequences. The microbial remediation is very crucial to prevent the leaching of heavy metal or mobilization into the ecosystem, as well as to make heavy metal extraction simpler. In this scenario, technological breakthroughs in microbes-based heavy metals have pushed bioremediation as a promising alternative to standard approaches. So, to counteract the deleterious effects of these toxic metals, some microorganisms have evolved different mechanisms of detoxification. This review aims to scrutinize the routes that are responsible for the heavy metal(loid)s contamination of agricultural land, provides a vital assessment of microorganism bioremediation capability. We have summarized various processes of heavy metal bioremediation, such as biosorption, bioleaching, biomineralization, biotransformation, and intracellular accumulation, as well as the use of genetically modified microbes and immobilized microbial cells for heavy metal removal.

Plants-Microorganisms-Based Bioremediation for Heavy Metal Cleanup: Recent Developments, Phytoremediation Techniques, Regulation Mechanisms, and Molecular Responses

Rapid industrialization, mine tailings runoff, and agricultural activities are often detrimental to soil health and can distribute hazardous metal(loid)s into the soil environment, with harmful effects on human and ecosystem health. Plants and their associated microbes can be deployed to clean up and prevent environmental pollution. This green technology has emerged as one of the most attractive and acceptable practices for using natural processes to break down organic contaminants or accumulate and stabilize metal pollutants by acting as filters or traps. This review explores the interactions between plants, their associated microbiomes, and the environment, and discusses how they shape the assembly of plant-associated microbial communities and modulate metal(loid)s remediation. Here, we also overview microbe-heavy-metal(loid)s interactions and discuss microbial bioremediation and plants with advanced phytoremediation properties approaches that have been successfully used, as well as their associated biological processes. We conclude by providing insights into the underlying remediation strategies' mechanisms, key challenges, and future directions for the remediation of metal(loid)s-polluted agricultural soils with environmentally friendly techniques.

Bioremediation of lignin derivatives and phenolics in wastewater with lignin modifying enzymes: Status, opportunities and challenges

Lignin modifying enzymes from fungi and bacteria are potential biocatalysts for sustainable mitigation of different potentially toxic pollutants in wastewater. Notably, the paper and pulp industry generates enormous amounts of wastewater containing high amounts of complex lignin-derived chlorinated phenolics and sulfonated pollutants. The presence of these compounds in wastewater is a critical issue from environmental and toxicological perspectives. Some chloro-phenols are harmful to the environment and human health, as they exert carcinogenic, mutagenic, cytotoxic, and endocrine-disrupting effects. In order to address these most urgent concerns, the use of oxidative lignin modifying enzymes for bioremediation has come into focus. These enzymes catalyze modification of phenolic and non-phenolic lignin-derived substances, and include laccase and a range of peroxidases, specifically lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), and dye-decolorizing peroxidase (DyP). In this review, we explore the key pollutant-generating steps in paper and pulp processing, summarize the most recently reported toxicological effects of industrial lignin-derived phenolic compounds, especially chlorinated phenolic pollutants, and outline bioremediation approaches for pollutant mitigation in wastewater from this industry, emphasizing the oxidative catalytic potential of oxidative lignin modifying enzymes in this regard. We highlight other emerging biotechnical approaches, including phytobioremediation, bioaugmentation, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-based technology, protein engineering, and degradation pathways prediction, that are currently gathering momentum for the mitigation of wastewater pollutants. Finally, we address current research needs and options for maximizing sustainable biobased and biocatalytic degradation of toxic industrial wastewater pollutants.

Perspectives of future water sources in Qatar by phytoremediation: biodiversity at ponds and modern approach

Anthropogenic and industrial wastewater (IWW) could be an additional future source of water to support the needs of the people of the State of Qatar. New lagoons have been built using modern technologies to optimize water use and waste recycling, as well as increasing the green spaces around the country. To achieve successful development of these new lagoons, lessons should be learned from the old ponds by examining their biodiversity, ecology, and the roles played by aquatic plants and algae to remediate wastewaters at these ponds. The perspectives of using IWW (from oil and gas activities), that is currently pumped deep into the ground are presented. Instead of causing great damage to groundwater, IWW can be stored in artificial ponds prepared for ridding it of all impurities and pollutants of various types, organic and inorganic, thereby making it serviceable for various human uses. Phycoremediation, bioremediation, and phytoremediation methods adopted by algae, bacteria and aquatic native plants are discussed, and special attention should be paid to those that proved successful in removing heavy metals and degrading organic compounds. At least three native plants namely: Amaranthus viridis, Phragmites australis, and Typha domingensis should be paid special attention, since these plants are efficient in remediation of arsenic and mercury; elements found abundantly in wastewater of gas activities. Some promising modern and innovative experiences and biotechnologies to develop efficient transgenic plants and microorganisms in removing and degrading pollutants are discussed, as an important strategy to keep the ecosystem clean and safe. Novelty statementIndustrial wastewater (IWW) could be an alternative source of water at the Arabian Gulf region. Currently, IWW is pumped deep into the ground causing a great damage to groundwater; little information about this issue has been reported. Such IWW can be stored in artificial ponds designed for ridding them of all impurities of various types; various remediation methods can be used. Modern biotechnology to develop transgenic plants and microorganisms to enhance these remediation methods can be adopted.

Futuristic avenues of metabolic engineering techniques in bioremediation

Bioremediation is a promising technology for the treatment of environmental contaminants and paving new avenues for the betterment of the environment. Over the last some years, several approaches have been employed to optimize the genetic machinery of microorganisms relevant to bioremediation. Metabolic engineering is one of them that provides a new insight for bioremediation. This review envisages the critical role of these techniques toward exploring the possibilities of the creation of a new pathway, leading to pathway expansion to new substrates by assembling of catabolic modules from different origins in the same microbial cell. The recombinant DNA technology and gene editing tools were also explored for the construction of metabolically engineered microbial strains for the degradation of complex pollutants. Moreover, the importance of CRISPR-Cas system for knock-in and knock-out of genes was described by using recent studies. Further, the idea of the cocultivation of more than one metabolic engineered microbial communities is also discussed, which can be crucial in the bioremediation of multiple and complex pollutants. Finally, this review also elucidates the effective application of metabolic engineering in bioremediation through these techniques and tools.

Plant-microbiome assisted and biochar-amended remediation of heavy metals and polyaromatic compounds ─ a microcosmic study

The study has been carried out to develop a plant-microbes assisted remediation technology to accelerate polyaromatic hydrocarbons (PAHs) degradation and heavy metals (HMs) removal in a microcosmic experiment. The quaternary mixture of PAHs (phenanthrene, anthracene, pyrene, and benzo[a] pyrene) and metals (Cr, Ni, and Pb) spiked the soil, constructing a microcosm; the microcosms were bioaugmented with newly developed plant bacterial consortia (Cpm₁ and Cpm₂). The microcosms were amended with biochar (sieved particle size 0.5-2 mm) as redox regulators to reduce oxidative stress of plant-microbe systems. To formulate the two plant-bacterial consortia, plant species were collected and bacteria were isolated from oil spill soil. The bacterial strains used in two formulated consortia includes ─ Cpm₁ (Enterobacter cloacae HS32, Brevibacillus reuszeri HS37, and Stenotrophomonas sp. HS16) and Cpm₂ (Acinetobacter junii HS29, Enterobacter aerogenes HS39 and Enterobacter asburiae HS22). The PAHs degradation and metal removal efficacy of the consortia (Cpm₁ and Cpm₂) were studied after 24 weeks of trial. The physicochemical properties of microcosm's soil (M₂ and M₃) were assessed after experimentation, which resulted in the finding that the soil exhibits dropped in pH from basic to neutral after application of the plant microbe's consortium. The electrical conductivity was lower in M₂ and M₃ soils, with a range between 1.60 and 1.80 mS/cm after the treatment. The Gas Chromatography/Mass Spectrometry (GC/MS) results illustrate how metabolites with the different molecular weight (M.W) were found in M₂ and M₃ soils (184─446), as a result of the plant-microbes mediated rhizodegradation of four spiked PAHs. The metals in microcosm's soil are very low in concentration after 24 weeks of trial when compared to control(M₁). The Cr, Ni and Pb removal percentages were found in 45.79, 42.19 and 44.85 in M₂. However, the removal percentages were found to be 45.41, 41.47 and 44.25 respectively for these same HMs in M₃ soil. Both the consortia that were newly developed showed similar trends of metals removal and PAHs degradation. This study provides a breakthrough in the area of rhizosphere engineering with the goal of maintaining a sustainable application of plant-microbes in ecosystem services.

Microbial bioremediation of oil contaminated seawater: A survey of patent deposits and the characterization of the top genera applied

Petroleum has been the world's major source of energy since the middle of the twentieth century, leading to positive changes but also social, political, and environmental problems worldwide. Oil contamination affects all ecosystems, and the remediation of polluted sites using environmentally friendly strategies is crucial. Here, we report an analysis of the patent documents of potential petroleum bioremediation techniques that use microbes to clean seawater. The patent search was performed using Orbit Intelligence®, SciFinder® and the Derwent World Patents Index®. A group of 500 patent documents were validated according to the search objective and carefully studied. Increases in patent deposits coincide with periods following widely reported oil spills, suggesting a relationship between media disclosure and stimulation of innovation activities. China leads the list of countries with patent applications in bioremediation with 152 deposits, followed by Russia with 133 and the US with 48. These three countries have completely different temporal deposit profiles, influenced by their historical, political, and economic scenarios. A total of 368 patents described degradation of the oil compounds exclusively by bacteria, 24 by fungi and yeasts, 1 by Archaea, 1 using a microalgal strain, and 32 by mixed consortia. The leading microbial genera found in the patents are Pseudomonas (114 patents), Bacillus (75), and Rhodococcus (60). In the top-10 list of microbial strains mostly cited/claimed, no genera are obligate hydrocarbonoclastic bacteria. This fact, together with the broad pattern found in the main International Patent Classification (IPC) codes, suggest that most of the documents are general bioremediation approaches and not focused on oil-polluted seawater. This work highlights the importance of stimulating the development of innovative environmentally friendly strategies focused on the degradation of oil hydrocarbons in marine ecosystems.

Microbial and Plant-Assisted Bioremediation of Heavy Metal Polluted Environments: A Review

Environmental pollution from hazardous waste materials, organic pollutants and heavy metals, has adversely affected the natural ecosystem to the detriment of man. These pollutants arise from anthropogenic sources as well as natural disasters such as hurricanes and volcanic eruptions. Toxic metals could accumulate in agricultural soils and get into the food chain, thereby becoming a major threat to food security. Conventional and physical methods are expensive and not effective in areas with low metal toxicity. Bioremediation is therefore an eco-friendly and efficient method of reclaiming environments contaminated with heavy metals by making use of the inherent biological mechanisms of microorganisms and plants to eradicate hazardous contaminants. This review discusses the toxic effects of heavy metal pollution and the mechanisms used by microbes and plants for environmental remediation. It also emphasized the importance of modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade heavy metals at a faster rate, highlighting recent advances in microbial bioremediation and phytoremediation for the removal of heavy metals from the environment as well as future prospects and limitations. However, strict adherence to biosafety regulations must be followed in the use of biotechnological methods to ensure safety of the environment.

High-throughput bioaccumulation, biotransformation, and production of silver and selenium nanoparticles using genetically engineered Pichia pastoris

A genetically modified Pichia pastoris strain overexpressing a metal-resistant variant of cytochrome b5 reductase enzyme was developed for silver and selenium biosorption and for nanoparticle production. The maximum recombinant enzyme expression level was approximately 31 IU/ml in the intercellular fluid after 24 h of incubation, and the capacity of the recombinant biomass for the biosorption of silver and selenium in aqueous batch models were measured as 163.90 and 63.71 mg/g, respectively. The ions were reduced in the presence of enzyme, leading to the formation of stable 70-180 nm metal nanoparticles. Various instrumental analyses confirmed the well-dispersed and crystalline nature of the spherical nanometals. The purified silver and selenium nanoparticles exhibited at least 10-fold less cytotoxicity toward HDF, EPG85-257, and T47D cells than silver nitrate and selenium dioxide. These results revealed that the engineered Pichia strain is an eco-friendly, rapid, high-throughput, and versatile reduction system for nanometal production.

Methane as a resource: can the methanotrophs add value?

Methane is an abundant gas used in energy recovery systems, heating, and transport. Methanotrophs are bacteria capable of using methane as their sole carbon source. Although intensively researched, the myriad of potential biotechnological applications of methanotrophic bacteria has not been comprehensively discussed in a single review. Methanotrophs can generate single-cell protein, biopolymers, components for nanotechnology applications (surface layers), soluble metabolites (methanol, formaldehyde, organic acids, and ectoine), lipids (biodiesel and health supplements), growth media, and vitamin B12 using methane as their carbon source. They may be genetically engineered to produce new compounds such as carotenoids or farnesene. Some enzymes (dehydrogenases, oxidase, and catalase) are valuable products with high conversion efficiencies and can generate methanol or sequester CO2 as formic acid ex vivo. Live cultures can be used for bioremediation, chemical transformation (propene to propylene oxide), wastewater denitrification, as components of biosensors, or possibly for directly generating electricity. This review demonstrates the potential for methanotrophs and their consortia to generate value while using methane as a carbon source. While there are notable challenges using a low solubility gas as a carbon source, the massive methane resource, and the potential cost savings while sequestering a greenhouse gas, keeps interest piqued in these unique bacteria.

Development of polyacrylamide chromium oxide as a new sorbent for solid phase extraction of As(iii) from food and environmental water samples

PACO was developed as an efficient adsorbent for preconcentration and trace determination of As(iii) with a detection limit of 0.45 μg L⁻¹.