Core/shell FePd/Pd catalyst with a superior activity to Pt in oxygen reduction reaction

FePd nanowires modified with cyclodextrin as improved catalysts: effect of the alloy composition on colloidal stability and catalytic capacity

FePd nanowires of different compositions are thoroughly characterized and assessed as catalysts for the reduction reaction of 4-nitrophenol to 4-aminophenol.

Recent Advances in Electrocatalysts for Proton Exchange Membrane Fuel Cells and Alkaline Membrane Fuel Cells

The rapid progress of proton exchange membrane fuel cells (PEMFCs) and alkaline exchange membrane fuel cells (AMFCs) has boosted the hydrogen economy concept via diverse energy applications in the past decades. For a holistic understanding of the development status of PEMFCs and AMFCs, recent advancements in electrocatalyst design and catalyst layer optimization, along with cell performance in terms of activity and durability in PEMFCs and AMFCs, are summarized here. The activity, stability, and fuel cell performance of different types of electrocatalysts for both oxygen reduction reaction and hydrogen oxidation reaction are discussed and compared. Research directions on the further development of active, stable, and low-cost electrocatalysts to meet the ultimate commercialization of PEMFCs and AMFCs are also discussed.

The Synthesis and Characterization of Novel Bi-/Trimetallic Nanoparticles and Their Nanocomposite Membranes for Envisaged Water Treatment

The impact of worldwide water scarcity, further exacerbated by environmental pollution, necessitates the development of effective water treatment membranes. Herein, we report the synthesis and characterization of nanocomposite membranes containing hyperbranched polyethyleneimine (HPEI) stabilized bi-and trimetallic nanoparticles. These membranes were prepared by blending a pre-grafted Polyethersulfone (PES) powder with the Pd@Fe@HPEI and Pd@FeAg@HPEI nanoparticles followed by phase inversion. The membranes, together with stabilized nanoparticles, were characterized by several analytical techniques, such as attenuated total reflectance–Fourier transform infra-red spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), optical contact angle (OCA), scanning electron microscopy (SEM), atomic force microscopy (AFM), and high-resolution transmission electron microscopy (HRTEM). These techniques revealed the elemental composition, zerovalent nature of the nanoparticles, and their small and even size distribution. Surface analysis showed chemical bonding between the polymeric functional groups and the supported nanoparticles. Furthermore, the nanocomposite membranes were found to be hydrophilic. Additionally, the membranes were investigated for swelling (water uptake), porosity, pore size, pure water permeation fluxes, and they indicated a decreased protein adhesion property. As such, the membranes fabricated in this work indicate the required properties for application in water treatment.

Engineering the electronic and strained interface for high activity of PdMcore@Ptmonolayer electrocatalysts for oxygen reduction reaction

Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level, which is important for designing electrocatalysts with high activity and durability. Herein, core-shell structured Pd₃M@Pt/C nanoparticles with binary PdM alloy cores (M = Fe, Ni, and Co) and a monolayer Pt shell were successfully synthesized with diverse interfaces. Among these, Pd₃Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance, roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference. The significantly enhanced activity is attributed to the combined effects of strain engineering, interfacial electron transfer, and improved Pt utilization. Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition (Pd₃Fe) optimizes the surface oxygen adsorption energy, thereby rendering excellent electrocatalytic activity. Future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.

Rh-doped PdAg nanoparticles as efficient methanol tolerance electrocatalytic materials for oxygen reduction

Direct methanol fuel cells (DMFCs) have received extensive attention on their high efficiency, high reliability, and no carbon emission. Unfortunately, the poor methanol tolerance and sluggish oxygen reduction reaction (ORR) at cathode have seriously hindered their further development. Herein we report the synthesis of a new class of Rh-doped PdAg alloy nanoparticles (NPs) for boosting ORR activity with high methanol tolerance capacity concurrently. The ORR mass activity of typical Rh₄Pd₄₀Ag₅₆ NPs is 4.2 times higher than that of commercial Pt catalyst. Moreover, it shows a great methanol tolerance capability by maintaining 92.4% in ORR mass activity in alkaline solution with 0.1 mol L^-1 methanol, against a big decrease of almost 100% for commercial Pt. Even after 30,000 potential cycles with 1.0 mol L^-1 methanol, Rh₄Pd₄₀Ag₅₆ NPs still retain ORR mass activity of up to 68.3%. DFT calculations reveal that excellent ORR performance with excellent methanol tolerance originates the active d-band-pinning engineering for an efficient site-independent electron-transfer. A generalized d-band mediated fine electron-transfer tuning path has blueprinted for effectively minimizing intrinsic ORR barriers with high current density. The present work highlights the key role of Rh doping in enhancing the ORR activity and methanol tolerance ability of PdAg NPs for future high-performance DMFCs.

Fe-Based Nano-Materials in Catalysis

The role of iron in view of its further utilization in chemical processes is presented, based on current knowledge of its properties. The addition of iron to a catalyst provides redox functionality, enhancing its resistance to carbon deposition. FeO_x species can be formed in the presence of an oxidizing agent, such as CO₂, H₂O or O₂, during reaction, which can further react via a redox mechanism with the carbon deposits. This can be exploited in the synthesis of active and stable catalysts for several processes, such as syngas and chemicals production, catalytic oxidation in exhaust converters, etc. Iron is considered an important promoter or co-catalyst, due to its high availability and low toxicity that can enhance the overall catalytic performance. However, its operation is more subtle and diverse than first sight reveals. Hence, iron and its oxides start to become a hot topic for more scientists and their findings are most promising. The scope of this article is to provide a review on iron/iron-oxide containing catalytic systems, including experimental and theoretical evidence, highlighting their properties mainly in view of syngas production, chemical looping, methane decomposition for carbon nanotubes production and propane dehydrogenation, over the last decade. The main focus goes to Fe-containing nano-alloys and specifically to the Fe–Ni nano-alloy, which is a very versatile material.

Identification of Active Hydrogen Species on Palladium Nanoparticles for an Enhanced Electrocatalytic Hydrodechlorination of 2,4-Dichlorophenol in Water

Clarifying hydrogen evolution and identifying the active hydrogen species are crucial to the understanding of the electrocatalytic hydrodechlorination (EHDC) mechanism. Here, monodisperse palladium nanoparticles (Pd NPs) are used as a model catalyst to demonstrate the potential-dependent evolutions of three hydrogen species, including adsorbed atomic hydrogen (H*_ads), absorbed atomic hydrogen (H*_abs), and molecular hydrogen (H₂) on Pd NPs, and then their effect on EHDC of 2,4-dichlorophenol (2,4-DCP). Our results show that H*_ads, H*_abs, and H₂ all emerge at -0.65 V (vs Ag/AgCl) and have increased amounts at more negative potentials, except for H*_ads that exhibits a reversed trend with the potential varying from -0.85 to -0.95 V. Overall, the concentrations of these three species evolve in an order of H*_abs < H*_ads < H₂ in the potential range of -0.65 to -0.85 V, H*_ads < H*_abs < H₂ in -0.85 to -1.00 V, and H*_ads < H₂ < H*_abs in -1.00 to -1.10 V. By correlating the evolution of each hydrogen species with 2,4-DCP EHDC kinetics and efficiency, we find that H*_ads is the active species, H*_abs is inert, while H₂ bubbles are detrimental to the EHDC reaction. Accordingly, for an efficient EHDC reaction, a moderate potential is desired to yield sufficient H*_ads and limit H₂ negative effect. Our work presents a systematic investigation on the reaction mechanism of EHDC on Pd catalysts, which should advance the application of EHDC technology in practical environmental remediation.