Effect of Molecular Weight Reduction, Acetylation and Esterification on the Emulsification Properties of Citrus Pectin

Pectin from steam explosion-treated citrus peel exhibits good emulsion properties and bioavailability-promoting effect in vitro of nobiletin

Steam explosion (SE) is a potential method to modify pectin structure, which might be connected to its emulsifying characteristics and the bioavailability of encapsulated polymethoxyflavone like nobiletin. However, the relationship between SE-modified pectin and the bioavailability of encapsulated nobiletin is still unclear. In this study, nobiletin-loaded emulsion was fabricated using citrus pectin modified with SE (0.15-0.9 MPa, 3 min) as emulsifier for in vitro digestion study, and the transport and absorption of nobiletin in Caco-2 cells to investigate the bioavailability-promoting effect. The results showed that SE treatment lowered the droplet size of emulsion from 21.38 ± 2.30 μm to 2.14 ± 0.12 μm, enhanced the nobiletin encapsulation efficiency from 23.73 ± 0.78% to 86.27 ± 3.81%, improved the nobiletin bioaccessibility in vitro from 2.48 ± 0.10% to 25.42 ± 0.10% and increased the intracellular accumulation of nobiletin by over 10 times, even higher than that of Tween 80. In conclusion, pectin from SE-treated citrus peel exhibited good emulsion properties and bioavailability-promoting effect in vitro of nobiletin.

Extraction and characterization of pectin from coffee (Coffea arabica L.) pulp obtained from four different coffee producing regions

The pectin was extracted using H2SO4, HNO3, and HCl from the pulp of four coffee varieties (Harar, Sidama, Jimma, and Guji) collected from different regions of Ethiopia. The effect of extraction temperature, time, solid-to-liquid ratio, types of acid and coffee varieties on the physiochemical properties and yield of pectin were studied. A maximum pectin yield, which was 12.7 %, was obtained from Harar coffee pulp treated with H2SO4. The equivalent weight of the extracted pectin varied from 1111 to 1667 g/mol. The methoxyl contents of the extracted pectin ranged from 4.23 to 7.13 %. The degrees of esterification and anhydrouronic acid of the pectin ranged from 53 to 68.5 % and 35.5 to 68.8 %, respectively. The results show the yield and physiochemical properties of the coffee pulp pectin depend on extraction parameters, acid types, and coffee varieties. Moreover, the pectin extracted from coffee pulp showed strong gelling properties.

A study on the structure-functionality relationship of Solenaia oleivora protein under high-intensity ultrasonication processing

Solenaia oleivora is a valuable freshwater mussel endemic to China with a high content of high-quality proteins, but the lack of structural information and limited functionality of Solenaia oleivora proteins constrained their application in the food industry. This study investigates the changes in structural characteristics and functionality of Solenaia oleivora protein under ultrasound processing at power from 200 to 600 W. The ultrasound treatment caused increased contents of β-turn and α-helix, and the exposure of interior hydrophobic groups, resulting in the increased hydrophobicity by around 3 folds. The ultrasound treatment could significantly decrease particle size and increase surface charges of Solenaia oleivora proteins, facilitating the increase of hydrosolubility from 10.2% to 81.7%. These structural changes and increased hydrosolubility contributed to the enhancement of emulsifying and foaming properties, and in vitro digestibility. The results suggested that the ultrasound-treated Solenaia oleivora proteins possessed the potential as an alternative protein in food applications.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.20%), galacturonic acid content (91.19 g/100 g), degree of methylation and acetylation (66.93 and 23.87%), and molecular weight (3.89 × 105 g/mol) were obtained when sugar beet flakes were pretreated by hot-air drying, and the extraction was made with citric acid using plant material with particle sizes of 125-200 μm. This pectin also had high emulsion activity (51.42%) and emulsion stability (88.03%). The FT-IR spectra were similar, while pectin thermal behavior was affected by the drying pretreatment and extraction conditions. The results of this study showed that from this by-product of the sugar industry it can be extracted high quality pectin with rheological and emulsifying properties that are superior to commercial citrus and apple pectin.

Degree of methyl esterification: A key factor for the encapsulation of icaritin with pectin

Pectin is a promising nano-carrier. The degree of methyl esterification (DM) influences the physiochemical properties of pectin. However, the effect of DM on the encapsulation capacity of pectin remains unclear. In this work, low methyl-esterified pectin (LMP) and high methyl-esterified pectin (HMP) were prepared. The molecular weight, rheological properties of these pectins with various DM levels were determined. Then icaritin/pectin micelles (IPMs) were prepared using HMP and LMP. Notably, higher loading capacities (18.75-20.12 %) were observed in HMP-IPMs compared to LMP-IPMs (15.72-16.64 %). Furthermore, LMP-IPMs demonstrated a DM-dependent reduction in particle sizes, ranging from 449 to 527 nm. In contrast, the particle sizes of HMP-IPMs varied between 342 and 566 nm, with smaller particle sizes observed in HMP-IPMs at higher DM levels. A significant positive correlation was found between DM and the formation of IPMs, including encapsulation efficiency, loading capacity, Zeta potential, and polydispersity index. Alkali de-esterification showed a weak impact on the pectin structure. Hydroxyl groups like 7-OH and 5-OH of icaritin might be involved in the formation of IPMs. The hydrogen-bond interactions between pectin and icaritin could be enhanced as DM increased.

Bio-based surfactants derived from pectin

Surfactants derived from renewable resources and synthesized using renewable feedstock and sustainable methods have become a major research focus over the past decade in the surfactant industry. This research presents an approach for rapidly converting readily available polysaccharides, like pectin derived from fruit waste, into safely biodegradable surface-active polymers. Commercially available pectin was modified with n-alkyl amines having different alkyl chain lengths using potassium carbonate as a catalyst. The effect of pectin molecular weight, alkyl chain length and degree of substitution (DS) on surface-active properties of the modified pectin derivatives was studied. Surface tension decreased slightly with lowering molecular weight, whereas interfacial tension decreased dramatically. Cytotoxicity evaluations using human dermal fibroblast, HepG2 and Jurkat cells demonstrated that these polysaccharide-based surfactants exhibit lower cytotoxicity compared to the conventional surfactants such as octyl phenol ethoxylates (i.e., Triton™ X-100), and therefore are more environmentally friendly. Biodegradation studies show that all modified pectins are "ultimately biodegradable" except for Pectin-amide C8 (1:10).

Modification methods, biological activities and applications of pectin: A review

Pectin is a complex and functionally rich natural plant polysaccharide that is widely used in food, medical, and cosmetic industries. It can be modified to improve its properties and expand its applications. Modification methods for natural pectin can be divided into physical, chemical, enzymatic, and compound methods. Different modification methods can result in modified pectins (MPs) exhibiting different physicochemical properties and biological activities. The objectives of this paper were to review the various pectin modification methods explored over the last decade, compare their differences, summarize the impact of different modification methods on the biological activity and physicochemical properties of pectin, and describe the applications of MPs in food and pharmaceutical fields. Finally, suggestions and perspectives for the development of MPs are discussed. This review offers a theoretical reference for the rational and efficient processing of pectin and the expansion of its applications.

Applications of Plant Bioactive Compounds as Replacers of Synthetic Additives in the Food Industry

According to the Codex Alimentarius, a food additive is any substance that is incorporated into a food solely for technological or organoleptic purposes during the production of that food. Food additives can be of synthetic or natural origin. Several scientific evidence (in vitro studies and epidemiological studies like the controversial Southampton study published in 2007) have pointed out that several synthetic additives may lead to health issues for consumers. In that sense, the actual consumer searches for "Clean Label" foods with ingredient lists clean of coded additives, which are rejected by the actual consumer, highlighting the need to distinguish synthetic and natural codded additives from the ingredient lists. However, this natural approach must focus on an integrated vision of the replacement of chemical substances from the food ingredients, food contact materials (packaging), and their application on the final product. Hence, natural plant alternatives are hereby presented, analyzing their potential success in replacing common synthetic emulsifiers, colorants, flavorings, inhibitors of quality-degrading enzymes, antimicrobials, and antioxidants. In addition, the need for a complete absence of chemical additive migration to the food is approached through the use of plant-origin bioactive compounds (e.g., plant essential oils) incorporated in active packaging.

A critical review of RG-I pectin: sources, extraction methods, structure, and applications

In recent years, RG-I pectin isolated by low-temperature alkaline extraction methods has attracted the attention of a large number of researchers due to its huge health benefits. However, studies on other applications of RG-I pectin are still lacking. In this study, we summarized the sources (e.g. potato pulp, sugar beet pulp, okra, apple pomace, citrus peel, pumpkin, grapefruit, ginseng, etc.), extraction methods, fine structure and applications of RG-I pectin in physiological activities (e.g. anti-cancer, anti-inflammatory, anti-obesity, anti-oxidation, immune regulation, prebiotics, etc.), emulsions, gels, etc. These neutral sugar side chains not only endow RG-I pectin with various physiological activities but the entanglement and cross-linking of these side chains also endow RG-I pectin with excellent emulsifying and gelling properties. We believe that this review can not only provide a comprehensive reading for new workers interested in RG-I pectin, but also provide a valuable reference for future research directions of RG-I pectin.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

The Effects of Pectin Structure on Emulsifying, Rheological, and In Vitro Digestion Properties of Emulsion

Pectin, a complex hydrocolloid, attracts extensive attention and application stemming from its good emulsification. However, the source of emulsification remains a conundrum. In this experiment, the structures of six kinds of commercial pectin, including LM 101 AS (101), LM 104 AS (104), 121 SLOW SET (121), YM 150 H (150), LM 13 CG (13CG), and β-PECTIN (β-P) were determined, and the effects of pectin structure on emulsion emulsification, rheology and in vitro digestibility were studied. The results showed that the β-P pectin contained a higher content of protein, ferulic acid, and acetyl and had a lower interfacial tension; this pectin-stabilized emulsion exhibited a smaller droplet size and superior centrifugal and storage stability. The results showed that β-P pectin had higher contents of protein, ferulic acid, and acetyl and lower interfacial tension than other pectins, and its stabilized emulsion exhibited smaller droplet size and superior centrifugation and storage stability. Furthermore, the emulsion formed by the pectin with high molecular weight and degree of methoxylation (DM) had a higher viscosity, which can inhibit the aggregation of emulsion droplets to some extent. However, the DM of pectin affected the charge and digestion behavior of pectin emulsion to a great extent. The smaller the DM, the more negative charge the emulsion carried, and the higher the release rate of free fatty acids. The results provided a basis for the rational selection and structural design of the pectin emulsifier.

In Vitro Release of Anthocyanins from Microencapsulated Natal Plum (Carissa macrocarpa) Phenolic Extract in Alginate/Psyllium Mucilage Beads

Natal plum (Carissa macrocarpa) contains anthocyanins, cyanidin 3-O-β-sambubioside (Cy-3-Sa), and cyanidin 3-O-glucoside (Cy-3-G) that possess great bioactive properties. During in vitro gastrointestinal digestion, Cy-3-Sa and Cy-3-G are highly sensitive to pH changes and have low bioaccessibility rates of 7.9% and 22%, respectively. This study aimed to therefore use microencapsulation techniques to improve the bioaccessibility of Cy-3-Sa and Cy-3-G. The crude anthocyanin-rich extract was extracted from freeze-dried Natal plum fruit using ultrasonic-assisted ethanol extraction. The anthocyanin-rich extract was encapsulated using the ionic gelation method. Four distinct carrier agents, namely sodium alginate, pectin, xanthan gum and psyllium mucilage were used to form the wall materials. Encapsulation efficiency was highest for alginate/psyllium mucilage beads (93.67%), while alginate showed the least efficiency (86.80%). Scanning Electron Microscopy revealed a cracked and porous structure for the Natal plum extract and a continuous smooth structure for all the beads. Fourier transform infrared spectroscopy showed peaks at 3300 and 1610 cm⁻¹, confirming the presence of polyphenols and polysaccharides in all beads. Thermal stability was higher for the alginate/psyllium mucilage beads and the observed thermal transitions were due to the bonds formed between the polymers and the polyphenols. Alginate beads combined with xanthan gum, pectin, and psyllium mucilage showed a prolonged release of anthocyanins compared to alginate in vitro alone. The highest anthocyanin bioaccessibility was obtained from alginate/psyllium mucilage beads (85.42 ± 1.03%). The results showed the effectiveness of alginate/psyllium mucilage beads in improving stability and in vitro anthocyanin release.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Extraction of Pectin from Satsuma Mandarin Peel: A Comparison of High Hydrostatic Pressure and Conventional Extractions in Different Acids

Satsuma mandarin peel pectin was extracted by high hydrostatic pressure-assisted citric acid (HHPCP) or hydrochloric acid (HHPHP), and the physiochemical, structural, rheological and emulsifying characteristics were compared to those from conventional citric acid (CCP) and hydrochloric acid (CHP). Results showed that HHP and citric acid could both increase the pectin yield, and HHPCP had the highest yield (18.99%). Structural characterization, including NMR and FTIR, demonstrated that HHPHP showed higher Mw than the other pectins. The viscosity of the pectin treated with HHP was higher than that obtained with the conventional method, with HHPHP exhibiting significantly higher viscosity. Interestingly, all the pectin emulsions showed small particle mean diameters (D_4,3 being 0.2–1.3 μm) and extremely good emulsifying stability with centrifugation and 30-day storage assays, all being 100%. Satsuma mandarin peel could become a highly promising pectin source with good emulsifying properties, and HHP-assisted acid could be a more efficient method for pectin extraction.

Improving method, properties and application of polysaccharide as emulsifier

At present, there are still some problems for the emulsification of polysaccharides such as lack of green, efficient and industrialized methods, lack of systematic and in-depth structure-activity relationship, and need of expanding its application scope. The physical, chemical and biological methods for improving the emulsifying of polysaccharides, the emulsifying properties and influencing factors of polysaccharides and application in food were reviewed herein. It was pointed out that the future research should focus on the effect of physical-biological synergistic function on the emulsification of polysaccharides, the effect of processing process on the structure and emulsification mechanism of polysaccharides, and further expanding the application field of polysaccharides with emulsification activity to improve the quality of products.

Structural and Emulsifying Properties of Citric Acid Extracted Satsuma Mandarin Peel Pectin

Satsuma mandarin peel pectin (MPP) was extracted by citric acid and its structure and emulsifying ability were evaluated. Structural characterization, including NMR, FTIR, monosaccharide compositions demonstrated that MMP showed lower DM value and higher Mw than commercial citrus pectin (CCP). In addition, MPP exhibited significantly better emulsification performance than CCP. When MPP concentration was increased to 1%, 1.5% (10 g/L, 15 g/L) and the pH was 3 (acidic condition), a stable emulsion containing 10% oil fraction could be obtained. The particle size of the obtained emulsion was ranging from 1.0–2.3 μm, its emulsifying activity ranged from 93–100% and emulsifying stability was 94–100%. Besides, MPP can better ensure the storage stability of higher oil ratio emulsions. The results demonstrated that the stable emulsifying properties of MPP may largely depend on the lower DM value and higher Mw. MPP could be used as a novel polysaccharide emulsifier, especially under acidic conditions, providing a promising alternative for natural emulsifiers that could be used in the food industry.

Production and molecular characterization of tailored citrus pectin-derived compounds

In this study, tailored-made citrus pectin-derived compounds were produced through controlled enzymatic and/or chemical modifications of commercial citrus pectin with different degrees of methylesterification (DM) and similar average molecular weight (M_W). In the first treatment, degradation of the citrus pectin (CP) materials by endo-polygalacturonase (EPG) yielded pectins with average M_w's (between 2 and 60 kDa). Separation and identification of the oligosaccharide fraction present in these samples, revealed the presence of non-methylesterified galacturonic acid oligomers with degree of polymerization (DP) 1-5. In the second treatment, exploiting the combined effect of EPG and pectin lyase, compounds with M_W between 2 and 21 kDa, containing methylesterified and non-methylesterified polygalacturonans (DP 1-6), were generated. Finally, CP was sequentially modified by chemical saponification and the action of EPG. A sample of DM 11% and M_W 2.7 kDa, containing POS (DP 1-5), was produced. Diverse pectin-derived compounds were successfully generated for further studies exploring their functionality.

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

In the context of the increasing interest in natural food ingredients, the emulsifying and emulsion-stabilizing properties of three rhamnogalacturonan-rich apple pectin-derived samples were assessed by evaluating a range of physicochemical properties. An apple pectin (AP74) was structurally modified by a β-eliminative reaction to obtain a RG-I-rich pectin sample (AP-RG). Subsequent acid hydrolysis of AP-RG led to the generation of pectin material with partially removed side chains (in particular arabinose depleted) (AP-RG-hydrolyzed), thus exhibiting differences in rhamnose, arabinose, and galactose in comparison to AP-RG. All samples exhibited surface activity to some extent, especially under acidic conditions (pH 2.5). Furthermore, the viscosity of the samples was assessed in relation to their emulsion-stabilizing properties. In a stability study, it was observed that the non-degraded AP74 sample at pH 2.5 exhibited the best performance among all the apple pectin-derived samples evaluated. This emulsion presented relatively small oil droplets upon emulsion production and was less prone to creaming than the emulsions stabilized by the (lower molecular weight) RG-I-rich materials. The AP-RG and AP-RG-hydrolyzed samples presented a slightly better emulsion stability at pH 6.0 than at pH 2.5. Yet, neither pectin sample was considered having good emulsifying and emulsion-stabilizing properties, indicated by the presence of coalesced and flocculated oil droplets.

Structural and emulsion stabilizing properties of pectin rich extracts obtained from different botanical sources

The presented research studied the emulsifying and emulsion stabilizing capacity of pectin samples isolated from different plant origin: apple, carrot, onion and tomato. The acid extracted pectin samples showed distinct structural properties. Specifically, apple pectin showed a high degree of methylesterification (78.41 ± 0.83%), carrot pectin had the lowest concentration of other co-eluted cell wall polymers, onion pectin displayed a bimodal molar mass distribution suggesting two polymer fractions with different molar mass and tomato pectin was characterized by a high protein content (16.48 ± 0.05%). The evaluation of the emulsifying and emulsion stabilizing potential of the pectin samples included investigating their ability to lower the interfacial tension next to a storage stability study of pectin stabilized o/w emulsions. Creaming behavior as well as the evolution of the oil droplet size were thoroughly examined during storage using multiple analytical techniques. Overall, smaller oil droplet sizes were obtained at pH 2.5 compared to pH 6.0 indicating better emulsifying capacity at lower pH. The lowest emulsion stability was observed in emulsions formulated with tomato pectin in which weak flocculation and relatively fast creaming affected emulsion stability. Onion pectin clearly showed the most promising emulsifying and emulsion stabilizing potential. At both pH conditions, emulsions stabilized by the onion pectin sample displayed highly stable oil droplet sizes during the whole storage period. The presence of the two polymer fractions in this sample can play an important role in the observed stability. In future work, it could be evaluated if both fractions contribute to emulsion stability in a synergistic way. In conclusion, this work showed that pectin samples extracted from different plant origin display diverse structural properties resulting in varying emulsifying and emulsion stabilizing potential. Polymer molar mass potentially plays a major role in the structure-function relation.

Development of nanoparticles coated with cassava bagasse pectin (Manihot esculenta Crantz) containing β-carotene for mucoadhesive applications

Pectin (PC) extracted from a solid residue from cassava roots (Manihot esculenta Crantz) was used to coat nanoparticles (NP) containing β-carotene (BC) aiming at the gastrointestinal administration of this lipophilic nutraceutical. The NP were prepared by spontaneous emulsification method using food grade components. Pectin-coated NP have been successfully prepared as confirmed by the increased particle size and negative surface charges due to the pectin's anionic nature. NP showed spherical shape and monodisperse distribution, with a mean size of 21.3 nm (polydispersity index (PDI) 0.29) for BC PC T80-NP (nanoparticle with β-carotene, pectin and Tween 80) and 261.4 nm (PDI 0.1) for BC PC T20-NP (nanoparticle with β-carotene, pectin and Tween 20). BC was encapsulated at amounts of 530 and 324 µg/ml for BC PC T80-NP and BC PC T20-NP, respectively, with high encapsulation efficiency (> 95%), increasing its antioxidant capacity in vitro, besides no cytotoxic effect. However, only BC PC T20-NP was stable over a 90 days storage period (4°C) and revealed a strong interaction between pectin and mucin. These results suggest that pectin-coated BC PC T20-NP is a promising strategy to improve the bioavailability and permeation of BC for administration through mucosal surfaces.

The Effect of Different Extraction Conditions on the Physical Properties, Conformation and Branching of Pectins Extracted from Cucumis melo Inodorus

The extraction of pectin involves the physico-chemical hydrolysis and solubilisation of pectic polymers from plant tissues under the influence of several processing parameters. In this study, an experimental design approach was used to examine the effects of extraction pH, time and temperature on the pectins extracted from Cucumis melo Inodorus. Knowledge of physical properties (intrinsic viscosity and molar mass), dilute solution conformation (persistence length and mass per unit length), together with chemical composition, was then used to propose a new method, which can estimate the length and number of branches on the pectin RG-I region. The results show that physical properties, conformation and the length and number of branches are sensitive to extraction conditions. The fitting of regression equations relating length and number of branches on the pectin RG-I region to extraction conditions can, therefore, lead to tailor-made pectins with specific properties for specific applications.

Interfacial properties of ultrahigh methoxylated pectin

The interfacial properties of ultrahigh methoxylated pectin (UHMP) prepared via esterification of citrus pectin (CP) were investigated. The intrinsic viscosity ([η]) of pectin was significantly decreased from 1211.5 mL/g to 294.9 mL/g as the degree of methylation (DM) increased from 63.18 ± 0.08% to 91.52 ± 0.11%. Surface tension (γ) analysis indicated that UHMP had a critical micelle concentration (CMC) of 0.8 g/L, which was slightly smaller than that of sugar beet pectin (SBP) (1.0 g/L). The morphology of the UHMP aggregation presented a network structure and irregular clusters at 10 μg/mL and 1 μg/mL based on atomic force microscopy (AFM). Transmission electron microscopy (TEM) observations further confirmed the self-aggregation behaviours and rod-like micelles of UHMP. The surface excess (Γ) was 1.69 ± 0.17 μmol/m² for UHMP, which was lower than the values of SBP (1.88 ± 0.21 μmol/m²) and CP (2.91 ± 0.57 μmol/m²). Correspondingly, UHMP possessed the highest molecular area (A) of 0.99 ± 0.10 nm². Thus, UHMP was proposed to be more flexible and extendable at the interface. The interfacial shear rheology study suggested that UHMP was able to form an elastic-dominant interfacial film to stabilize the oil/water interface.

Pectin recovery and characterization from lemon juice waste streams

BACKGROUND

Pectin characteristics from different parts of lemon fruit (Citrus limon L.) were studied as a basis for assessing their suitability for functional applications. Pectin was extracted from lemon albedo, lemon core parts and membranes, and lemon extract using an aqueous extraction protocol. The composition and structural properties of the isolated pectins were examined by means of complementary analytical methods to assess their molecular characteristics for potential industrial applications.

RESULTS

The isolation protocol yielded pectins that were predominantly composed of galacturonic acid, with differences in the degree of methylation and neutral sugars content, and with low protein content, indicating high-purity materials. The same extraction protocol resulted in differences in yield and purity between the three different parts of lemon fruit, and in structural variations in the pectin backbone, as evidenced by differences in sugar composition and molecular weight. Solutions of the isolated lemon pectins exhibited pseudoplastic behavior. Macromolecular characterization showed that the lemon extract pectin had the highest molecular weight and hydrodynamic volume, followed by lemon core and lemon albedo pectin.

CONCLUSION

The work demonstrates that pectins with distinct structural properties may be extracted from different parts of lemon wastes and used for different technological purposes. © 2019 Society of Chemical Industry.

Polysaccharides at fluid interfaces of food systems

Fabrication of next generation polysaccharides with interfacial properties is driven by the need to create high performance surfactants that operate at extreme environments, as for example in complex food formulations or in the gastrointestinal tract. The present review examines the behaviour of polysaccharides at fluid food interfaces focusing on their performance in the absence of any other intentionally added interfacially active components. Relevant theoretical principles of colloidal stabilisation using concepts that have been developed for synthetic polymers at interfaces are firstly introduced. The role of protein that in most cases is present in polysaccharide preparations either as contaminant or as integral part of the structure is also discussed. Critical assessment of the literature reveals that although protein may contribute to emulsion formation mostly as an anchor for polysaccharides to attach, it is not the determinant factor for the long-term emulsion stability, irrespectively of polysaccharide structure. Interfacial performance of key polysaccharides is also assessed revealing shared characteristics in their modes of adsorption. Conformation of polysaccharides, as affected by the composition of the aqueous solvent needs to be closely controlled, as it seems to be the underlying fundamental cause of stabilisation events and appears to be more important than the constituent polysaccharide sugar-monomers. Finally, polysaccharide adsorption is better understood by regarding them as copolymers, as this approach may assist to better control their properties with the aim to create the next generation biosurfactants.