The effect of pathologic venous valve on neighboring valves: fluid-structure interactions modeling

Platelet accumulation in an endothelium-coated elastic vein valve model of deep vein thrombosis is mediated by GPIbα-VWF interaction

Deep vein thrombosis is a life-threatening disease that takes millions of people's lives worldwide. Given both technical and ethical issues of using animals in research, it is necessary to develop an appropriate in vitro model that would recapitulate the conditions of venous thrombus development. We present here a novel microfluidics vein-on-a-chip with moving valve leaflets to mimic the hydrodynamics in a vein, and Human Umbilical Vein Endothelial Cell (HUVEC) monolayer. A pulsatile flow pattern, typical for veins, was used in the experiments. Unstimulated human platelets, reconstituted with the whole blood, accumulated at the luminal side of the leaflet tips proportionally to the leaflet flexibility. Platelet activation by thrombin induced robust platelet accrual at the leaflet tips. Inhibition of glycoprotein (GP) IIb-IIIa did not decrease but, paradoxically, slightly increased platelet accumulation. In contrast, blockade of the interaction between platelet GPIbα and A1 domain of von Willebrand factor completely abolished platelet deposition. Stimulation of the endothelium with histamine, a known secretagogue of Weibel-Palade bodies, promoted platelet accrual at the basal side of the leaflets, where human thrombi are usually observed. Thus, platelet deposition depends on the leaflet flexibility, and accumulation of activated platelets at the valve leaflets is mediated by GPIbα-VWF interaction.

Importance of Non-Newtonian Computational Fluid Modeling on Severely Calcified Aortic Valve Geometries - Insights from Quasi-Steady State Simulations

The Newtonian model has commonly been used to represent the viscosity of blood in the aorta, despite blood itself being a non-Newtonian fluid. This is justified where shear rates tend to be large. However, we hypothesized that using the Newtonian model to predict the hemodynamics on the aortic valve, particularly in those with severe calcifications, is inaccurate owing to valve leaflet geometry irregularities inducing multiple regions of low shear rates, <100 s-1, where a Newtonian model is invalid. We investigated the use of three fluid models: Newtonian, Carreau, and Quemada on a healthy and calcified valve and compared their ability to capture important hemodynamic parameters of time averaged wall shear stress (TAWSS) and the oscillatory shear index (OSI). Our findings indicate that when the shear rates were large enough, >100 s-1, use of a Newtonian model was justified for the ventricularis side of the leaflet. However, in spatial regions of low shear rates, <100 s-1, specifically on the inner cusps of the fibrosa side of the valve, TAWSS calculations under a Newtonian model were found to be much lower when compared with their non-Newtonian Carreau and Quemada counterparts. We hereby conclude that in order to facilitate more accurate computational flow simulations in severe aortic valve calcification which is subjected to relatively large spatial regions of low shear (<100 s-1), a non-Newtonian model should be applied.

Paying the price for standing tall: Fluid mechanics of prostate pathology

BACKGROUND

Age-dependent increase in the incidence of benign prostatic hyperplasia (BPH) and prostate cancer (PCa) are both related to cell proliferation and survival controlled by intraprostatic free testosterone (FT) concentration. Paradoxically, BPH and PCa occur as circulating testosterone levels decrease, so any possible relationship between testosterone levels and development of BPH and PCa remains obscure.

RESULTS

In BPH the enlarging prostate is exposed to high testosterone levels arriving directly from the testes at concentrations about hundredfold higher than systemic FT. This occurs because venous blood from the testes is diverted into the prostate due to the elevated hydrostatic pressure of blood in the internal spermatic veins (ISVs). Elevated pressure is caused by the destruction of one-way valves (clinically detected as varicocele), a unique phenomenon related to human erect posture. While standing, human males are ISVs vertically oriented, resulting in high intraluminal hydrostatic pressures-a phenomenon not found in quadrupeds. In this communication, we demonstrate the fluid mechanics' phenomena at the basis of varicocele leading to prostate pathology.

CONCLUSIONS

So far, varicocele has been studied mostly for its etiologic role in male infertility and, thus, for its effects on the testes. It is becoming clear that varicocele is a major etiologic factor in BPH and likely also in PCa. Restoring normal testicular venous pressure by treatment of the abnormal ISV's in varicocele has been shown to avert the flow from the prostate with the effect of reducing prostate volume, alleviating symptoms of BPH, and increasing concentrations of circulating FT.

Advances in Engineering Venous Valves: The Pursuit of a Definite Solution for Chronic Venous Disease

Native venous valves enable proper return of blood to the heart. Under pathological conditions (e.g., chronic venous insufficiency), venous valves malfunction and fail to prevent backward flow. Clinically, this can result in painful swelling, varicose veins, edema, and skin ulcerations leading to a chronic wound situation. Surgical correction of venous valves has proven to drastically reduce these symptoms. However, the absence of intact leaflets in many patients limits the applicability of this strategy. In this context, the development of venous valve replacements represents an appealing approach. Despite acceptable results in animal models, no venous valve has succeeded in clinical trials, and so far no single prosthetic venous valve is commercially available. This calls for advanced materials and fabrication approaches to develop clinically relevant venous valves able to restore natural flow conditions in the venous circulation. In this study, we critically discuss the approaches attempted in the last years, and we highlight the potential of tissue engineering to offer new avenues for valve fabrication. Impact statement Venous valves prosthesis offer the potential to restore normal venous flow, and to improve the prospect of patients that suffer from chronic venous disease. Current venous valve replacements are associated with poor outcomes. A deeper understanding of the approaches attempted so far is essential to establish the next steps toward valve development, and importantly, tissue engineering constitutes a unique toolbox to advance in this quest.

The role of valve stiffness in the insurgence of deep vein thrombosis

Deep vein thrombosis is a life-threatening development of blood clots in deep veins. Immobility and blood flow stagnancy are typical risk factors indicating that fluid dynamics play an important role in the initiation of venous clots. However, the roles of physical parameters of the valves and flow conditions in deep vein thrombosis initiation have not been fully understood. Here, we describe a microfluidics in vitro method that enabled us to explore the role of valve elasticity using in situ fabrication and characterisation. In our experimental model the stiffness of each valve leaflet can be controlled independently, and various flow conditions were tested. The resulting complex flow patterns were detected using ghost particle velocimetry and linked to localised thrombus formation using whole blood and an aqueous suspension of polystyrene particles. In particular, valves with leaflets of similar stiffness had clot formation on the valve tips whereas valves with leaflets of different stiffness had clot formation in the valve pocket.

Effect of valve lesion on venous valve cycle: A modified immersed finite element modeling

The present study aimed to understand the effect of venous valve lesion on the valve cycle. A modified immersed finite element method was used to model the blood–tissue interactions in the pathological vein. The contact process between leaflets or between leaflet and sinus was evaluated using an adhesive contact method. The venous valve modeling was validated by comparing the results of the healthy valve with those of experiments and other simulations. Four valve lesions induced by the abnormal elasticity variation were considered for the unhealthy valve: fibrosis, atrophy, incomplete fibrosis, and incomplete atrophy. The opening orifice area was inversely proportional to the structural stiffness of the valve, while the transvalvular flow velocity was proportional to the structural stiffness of the valve. The stiffening of the fibrotic leaflet led to a decrease in the orifice area and a stronger jet. The leaflet and blood wall shear stress (WSS) in fibrosis was the highest. The softening of the atrophic leaflet resulted in overly soft behavior. The venous incompetence and reflux were observed in atrophy. Also, the atrophic leaflet in incomplete atrophy exhibited weak resistance to the hemodynamic action, and the valve was reluctant to be closed owing to the large rotation of the healthy leaflet. Low blood WSS and maximum leaflet WSS existed in all the cases. A less biologically favorable condition was found especially in the fibrotic leaflet, involving a higher mechanical cost. This study provided an insight into the venous valve lesion, which might help understand the valve mechanism of the diseased vein. These findings will be more useful when the biology is also understood. Thus, more biological studies are needed.

Fluid-structure interaction simulations of venous valves: A monolithic ALE method for large structural displacements

Venous valves are bicuspidal valves that ensure that blood in veins only flows back to the heart. To prevent retrograde blood flow, the two intraluminal leaflets meet in the center of the vein and occlude the vessel. In fluid-structure interaction (FSI) simulations of venous valves, the large structural displacements may lead to mesh deteriorations and entanglements, causing instabilities of the solver and, consequently, the numerical solution to diverge. In this paper, we propose an arbitrary Lagrangian-Eulerian (ALE) scheme for FSI simulations designed to solve these instabilities. A monolithic formulation for the FSI problem is considered, and due to the complexity of the operators, the exact Jacobian matrix is evaluated using automatic differentiation. The method relies on the introduction of a staggered in time velocity to improve stability, and on fictitious springs to model the contact force of the valve leaflets. Because the large structural displacements may compromise the quality of the fluid mesh as well, a smoother fluid displacement, obtained with the introduction of a scaling factor that measures the distance of a fluid element from the valve leaflet tip, guarantees that there are no mesh entanglements in the fluid domain. To further improve stability, a streamline upwind Petrov-Galerkin (SUPG) method is employed. The proposed ALE scheme is applied to a two-dimensional (2D) model of a venous valve. The presented simulations show that the proposed method deals well with the large structural displacements of the problem, allowing a reconstruction of the valve behavior in both the opening and closing phase.