Scaffolds derived from cancellous bovine bone support mesenchymal stem cells' maintenance and growth

An overview of the production of tissue extracellular matrix and decellularization process

Thousands of patients need an organ transplant yearly, while only a tiny percentage have this chance to receive a tissue/organ transplant. Nowadays, decellularized animal tissue is one of the most widely used methods to produce engineered scaffolds for transplantation. Decellularization is defined as physically or chemically removing cellular components from tissues while retaining structural and functional extracellular matrix (ECM) components and creating an ECM-derived scaffold. Then, decellularized scaffolds could be reseeded with different cells to fabricate an autologous graft. Effective decellularization methods preserve ECM structure and bioactivity through the application of the agents and techniques used throughout the process. The most valuable agents for the decellularization process depend on biological properties, cellular density, and the thickness of the desired tissue. ECM-derived scaffolds from various mammalian tissues have been recently used in research and preclinical applications in tissue engineering. Many studies have shown that decellularized ECM-derived scaffolds could be obtained from tissues and organs such as the liver, cartilage, bone, kidney, lung, and skin. This review addresses the significance of ECM in organisms and various decellularization agents utilized to prepare the ECM. Also, we describe the current knowledge of the decellularization of different tissues and their applications.

Assessing the biocompatibility of bovine tendon scaffold, a step forward in tendon tissue engineering

Tendon is a collagen-enriched, tough, and intricately arranged connective tissue that connects muscle to the bone and transmits forces, resulting in joint movement. High mechanical demands can affect normal tissues and may lead to severe disorders, which usually require replacement of the damaged tendon. In recent decades, various decellularization methods have been studied for tissue engineering applications. One of the major challenges in tendon decellularization is preservation of the tendon extracellular matrix (ECM) architecture to maintain natural tissue characteristics. The aim of the present study was to create a decellularized bovine Achilles tendon scaffold to investigate its cytocompatibility with seeded hAd-MSCs (human adipose derived-mesenchymal stem cells) and blastema tissue in vitro. Here, we describe a reliable procedure to decellularize bovine Achilles tendon using a combination of physical and chemical treatments including repetitive freeze-thaw cycles and the ionic detergent SDS, respectively. The decellularization effectiveness and cytocompatibility of the tendon scaffolds were verified by histological studies and scanning electron microscopy for up to 30 days after culture. Histological studies revealed hAd-MSC attachment and penetration into the scaffolds at 5, 10, 15 and 20 days of culture. However, a decrease in cell number was observed on days 25 and 30 after culture in vitro. Moreover, migration of the blastema tissue cells into the scaffold were shown at 10 to 25 days post culture, however, destruction of the scaffolds and reduction in cell number were observed on 30th day after culture. Our results suggest that this decellularization protocol is an effective and biocompatible procedure which supports the maintenance and growth of both hAd-MSCs and blastema cells, and thus might be promising for tendon tissue engineering.

Preparation of extracellular matrix of fish swim bladders by decellularization with supercritical carbon dioxide

Fish swim bladders used to be considered as byproducts or waste in fishery; however, they are potential materials for biological medicine with abundant collagen. In this work, an efficient noncytotoxic decellularization process using sodium dodecyl sulfate (SDS) ternary system assisted with supercritical carbon dioxide (scCO2) as the green extraction fluid and ethanol (ET) as the cosolvent has been developed to harvest acellular fish swim bladders (AFSBs). The experimental results show that the tissue treated by SDS assisted with scCO2 and ethanol at 37 °C and 25 MPa can be decellularized thoroughly and maintains intact fibers and uniform pore distribution, which resulting in a tensile strength of 5.61 MPa and satisfactory biocompatibility. Meanwhile, the residual SDS content in scCO2/SDS/ET ternary system is 0.0122% which is significantly lower than it in scCO2/SDS system due to the enhanced mass transfer rate of SDS in tissues by scCO2 with ethanol. The synergy between SDS and ethanol can enhance the diffusion coefficient and the solubility of SDS in scCO2, which reduced the contact time between SDS and tissues. Meaningfully, the results obtained in this work can not only provide a novel strategy to produce acellular matrix with superior properties, but also offer a further understanding of the decellularization through scCO2 extraction processing with the synergy of suitable detergent/cosolvent.

The in vitro analysis of migration and polarity of blastema cells in the extracellular matrix derived from bovine mesenteric in the presence of fibronectin

Cell migration is an essential process in embryonic development, wound healing, and pathological conditions. Our knowledge of cell migration is often based on the two dimentional evaluation of cell movement, which usually differs from what occurred in vivo. In this study, we investigated cellular migration from blastema tissue toward bovine decellularized mesentery tissue. In this regard, fibronectin (FN) was assessed to confirm cell migration. Therefore, we established a cell migration model using blastema cells migration toward the extracellular matrix derived from bovine mesenteric tissue. A physiochemical decellularization method was utilized based on freeze-thaw cycles and agitation in sodium dodecyl sulfate and Triton X-100 to remove cells from the extracellular matrix (ECM) of bovine mesenteric tissue. These types of matrices were assembled by the rings of blastema tissues originated from the of New Zealand rabbits pinna and cultured in a medium containing FN in different days in vitro, and then they are histologically evaluated, and the expression of the Tenascin C gene is analyzed. By means of tissue staining and after confirmation of the cell removal from mesenteric tissue, polarity, and migration of blastema cells was observed in the interaction site with this matrix. Also, the expression of the Tenascin C gene was assessed on days 15 and 21 following the cell culture process. The results showed that the three dimentional model of cellular migration of blastema cells along with the ECM could be a suitable model for investigating cell behaviors, such as polarity and cell migration in vitro.

Skeletal microenvironment system utilising bovine bone scaffold co-cultured with human osteoblasts and osteoclast-like cells

A three-dimensional ex vivo bone cell culture system mimicking the skeletal system is useful for bone tissue engineering and as drug discovery platforms. The present study aimed to establish a three-dimensional skeletal culture system using native bovine bone scaffolds and human bone cells. Bovine bone scaffolds were cultured with human foetal osteoblasts 1.19 and human peripheral blood mononuclear cells for 21 days under standard culture conditions. The following groups were established: Decalcified unseeded bone scaffold (DUBS) as baseline control, decalcified seeded bone scaffold (DSBS) to mimic osteoporosis condition and undecalcified seeded bone scaffold to mimic normal condition. The scaffold's porosity and cell attachment on the scaffolds were determined using scanning electron microscopy. Histological evaluation was used to examine changes in trabecular bone structure. Dual-energy X-ray absorptiometry analysis was performed to determine the bone mineral density (BMD) and bone mineral content (BMC) of the scaffolds. A compression test was performed to examine the total biomechanical strength of the scaffolds. The trabecular thickness and number increased, while the trabecular separationwas reduced slightly in DSBS than in DUBS (P>0.05). The BMD and BMC increased significantly (P<0.05), while the compressive strength only increased slightly in DSBS than in DUBS (P>0.05). In conclusion, the ex vivo skeletal microenvironment comprising native bovine bone scaffolds seeded with bone cells is structurally, functionally and mechanically comparable with natural bone. This system may be used as a platform to understand bone physiology and screen for potential drug candidates.

Fabrication of Decellularized Engineered Extracellular Matrix through Bioreactor-Based Environment for Bone Tissue Engineering

Extracellular matrix (ECM)-contained grafts can be achieved by decellularization of native bones or synthetic scaffolds. Limitations associated with harvesting the native bone has raised interest in preparing in vitro ECM bioscaffold for bone tissue engineering. Here, we intend to develop an ECM-contained construct via decellularizing an engineered gelatin-coated β-tricalcium phosphate (gTCP) scaffold. In order to find an optimal protocol for decellularization of cell-loaded gTCP scaffolds, they were seeded with buccal fat pad-derived stem cells. Then, four decellularization protocols including sodium dodecyl sulfate, trypsin, Triton X-100, and combined solution methods were compared for the amounts of residual cells and remnant collagen and alteration of scaffold structure. Then, the efficacy of the selected protocol in removing cells from gTCP scaffolds incubated in a rotating and perfusion bioreactor for 24 days was evaluated and compared with static condition using histological analysis. Finally, decellularized scaffolds, reloaded with cells, and their cytotoxicity and osteoinductive capability were evaluated. Complete removal of cells from gTCP scaffolds was achieved from all protocols. However, treatment with Triton X-100 showed significantly higher amount of remnant ECM. Bioreactor-incubated scaffolds possessed greater magnitude of ECM proteins including collagen and glycosaminoglycans. Reseeding the decellularized scaffolds also represented higher osteoinductivity of bioreactor-based scaffolds. Application of Triton X-100 as decellularization protocol and usage of bioreactors are suggested as a suitable technique for designing ECM-contained grafts for bone tissue engineering.

Development and evaluation of a novel beneficent antimicrobial bioscaffold based on animal waste-fish swim bladder (FSB) doped with silver nanoparticles

Treated fish wastes have found many applications in industry and medicine. Besides, nowadays low-cost scaffold with antimicrobial activity which can accelerates the process of wound healing is very demanding. In this study fish swim bladder (FSB), taken from Rutilus frisii, which is a disposable waste was doped with silver nanoparticles (AgNPs) and evaluated as antimicrobial wound dressing. The scanning electron microscopy (SEM) micrographs showed the presence of AgNPs on the scaffold. Histological observation confirmed cells and muscle removal from FSB and collagen preservation. There was significant antibacterial activity even in 50 ppm AgNPs concentration against pathogenic bacteria, swelling ratio was rather low, and cytotoxic assay revealed that the AgNPs-FSB scaffold had no toxic effect on human foreskin fibroblast (HFF) cells. Interestingly, despite the porous structure, the AgNPs-FSB scaffold was found to be a suitable barrier to microbial penetration even after 72 h. Further study showed the gradual release of AgNPs during 24 h. In conclusion, biofabricated FSB prepared in this study have appropriate characteristics notably encompassing a high quantity of collagen and broad-spectrum antimicrobial activity. Also, its porous structure made it suitable as a 3-D structure for the growth of cells and adding other antimicrobial nano-sized materials.

Bioactive poly(ε-caprolactone) microspheres with tunable open pores as microcarriers for tissue regeneration

Microparticles with porous structure can be applied as microcarriers for both cell culture and tissue regeneration. While well-controlled pore structure represents a critical challenge to be achieved. In the present study, in order to develop microcarriers for cell culture, a series of poly(ε-caprolactone) microspheres were fabricated with varied macroporous structures. Poly(ε-caprolactone) microspheres were prepared via the integration of the emulsion/solvent evaporation and particle leaching mechanisms. Particularly, by adjusting poly(ε-caprolactone) concentration and the ratio between the porogen paraffin and poly(ε-caprolactone), the microspheres with the pore size of 25.6-84.0 μm and the porosity of 57.4-75.5% were obtained. Further, the microspheres were subjected to alkaline hydrolysis, followed by surface coating with hydroxyapatite. These porous poly(ε-caprolactone) microspheres with surface modification well supported the adhesion and growth of human fibroblasts. Together, bioactive poly(ε-caprolactone) microspheres with controlled pore structure are potential to be applied in cell culture and tissue regeneration.

MC3T3 infiltration and proliferation in bovine trabecular scaffold regulated by dynamic flow bioreactor and augmented by low-intensity pulsed ultrasound

Background

Low-intensity pulsed ultrasound (LIPUS) has been used in both basic research and clinical settings for its therapeutic potential in promoting tissue healing. Clinical data has shown that LIPUS can accelerate fresh fracture healing. However, the treatment for aging osteoporosis and non-union is still unclear. In addition, the mechanism of ultrasound promoted bone healing has remained unknown.

Objective

It is proposed that noninvasive ultrasound treatment can enhance local fluid flow within the tissue to initiate remodeling and regeneration. The goal of this study was to evaluate the effects of dynamic ultrasound in promoting cellular mechanotransduction within bioengineered organic scaffolds to trigger osteogenesis and mineralization.

Methods

The experiment was designed in two-fold: to evaluate the role of LIPUS on osteoblastic-like (MC3T3) cell proliferation and mineralization in response to acoustic waves, using biomechanical rate-dependent signals in a bioreactor; and, to evaluate the new scaffold experimentation techniques, in order to generate a potential implantable biomaterial for orthopedic tissue regeneration and repair.

Results

LIPUS treatment on MC3T3 cells yielded enhanced cellular mineralization (**p < 0.001) in 3-D scaffolding, but reduced the total cell numbers (*p < 0.05), using Alizarin Red staining and cell counting analyses, respectively, in comparison to the control.

Conclusion

This study suggests that LIPUS, if applied at proper frequency and duty cycle, can promote cell mineralization within the 3-D organic scaffold under in vitro setting. The translational component of this experiment seeks to draw a parallel to the potential pre-treatment of scaffolds for implantation before orthopedic surgery, which could prove to greatly benefit the patient in accelerating fracture healing and tissue regeneration.

The Translational Potential of this Article

LIPUS stimulation was critical in contributing to the mechanical signaling transductions that activated bone enhancement parameters in MC3T3 cells regulated by bioreactor, and thus has potential to change how we pretreat scaffolds for orthopedic surgery and noninvasively accelerate healing in the future, e.g., in an extreme condition such as long-term space mission.

Magnesium Chloride promotes Osteogenesis through Notch signaling activation and expansion of Mesenchymal Stem Cells

Mesenchymal stem cells (MSC) are osteoblasts progenitors and a variety of studies suggest that they may play an important role for the health in the field of bone regeneration. Magnesium supplementation is gaining importance as adjuvant treatment to improve osteogenesis, although the mechanisms involving this process are not well understood. The objective of this study was to investigate the effects of magnesium on MSC differentiation. Here we show that in rat bone marrow MSC, magnesium chloride increases MSC proliferation in a dose-dependent manner promoting osteogenic differentiation and mineralization. These effects are reduced by 2-APB administration, an inhibitor of magnesium channel TRPM7. Of note, magnesium supplementation did not increase the canonical Wnt/β-catenin pathway, although it promoted the activation of Notch1 signaling, which was also decreased by addition of 2-APB. Electron microscopy showed higher proliferation, organization and maturation of osteoblasts in bone decellularized scaffolds after magnesium addition. In summary, our results demonstrate that magnesium chloride enhances MSC proliferation by Notch1 signaling activation and induces osteogenic differentiation, shedding light on the understanding of the role of magnesium during bone regeneration.

Decellularized Bone Matrix Scaffold for Bone Regeneration

Decellularized bone matrix is gaining a lot of attention as implantable biomaterials and/or biological scaffolds for bone tissue repair, and shows good clinical performance. This chapter describes the processing techniques and characterization protocols of decellularized bone. For the applications of the decellularized bone scaffold in promoting bone repair and regeneration, we discuss some of the current advances, and highlight the advantages and disadvantages of these scaffolds. Fabrication and application of the hydrogel derived from decellularized bone for bone tissue engineering are also presented.

Limb reconstruction with decellularized, non-demineralized bone in a young leporine model

Limb salvage from a variety of pathological processes in children is often limited by the unavailability of optimal allograft bone, or an appropriate structural bone substitute. In this study, we sought to examine a practical alternative for pediatric limb repair, based on decellularized, non-demineralized bone grafts, and to determine whether controlled recellularization prior to implantation has any impact on outcome. Growing New Zealand rabbits (n = 12) with a complete, critical-size defect on the left tibiofibula were equally divided into two groups. One group received a decellularized, non-demineralized leporine tibiofibula graft. The other group received an equivalent graft seeded with mesenchymal stem cells labeled with green fluorescent protein (GFP), at a fixed density. Animals were euthanized at comparable time points 3-8 weeks post-implantation. Statistical analysis was by the Student t-test and Fisher's exact test (P < 0.05). There was no significant difference in the rate of non-union between the two groups, including on 3D micro-CT. Incorporated grafts achieved adequate axial bending rigidity, torsional rigidity, union yield and flexural strength, with no significant differences or unequal variances between the groups. Correspondingly, there were no significant differences in extracellular calcium levels, or alkaline phosphatase activity. Histology confirmed the presence of neobone in both groups, with GFP-positive cells in the recellularized grafts. It was shown that osseous grafts derived from decellularized, non-demineralized bone undergo adequate remodeling in vivo after the repair of critical-size limb defects in a growing leporine model, irrespective of subsequent recellularization. This methodology may become a practical alternative for pediatric limb reconstruction.

Remineralized bone matrix as a scaffold for bone tissue engineering

There is a need for improved biomaterials for use in treating non-healing bone defects. A number of natural and synthetic biomaterials have been used for the regeneration of bone tissue with mixed results. One approach is to modify native tissue via decellularization or other treatment for use as natural scaffolding for tissue repair. In this study, our goal was to improve on our previously published alternating solution immersion (ASI) method to fabricate a robust, biocompatible, and mechanically competent biomaterial from natural demineralized bone matrix (DBM). The improved method includes an antigen removal (AR) treatment step which improves mineralization and stiffness while removing unwanted proteins. The chemistry of the mineral in the remineralized bone matrix (RBM) was consistent with dicalcium phosphate dihydrate (brushite), a material used clinically in bone healing applications. Mass spectrometry identified proteins removed from the matrix with AR treatment to include α-2 HS-glycoprotein and osteopontin, noncollagenous proteins (NCPs) and known inhibitors of biomineralization. Additionally, the RBM supported the survival, proliferation, and differentiation of human mesenchymal stromal cells (MSCs) in vitro as well or better than other widely used biomaterials including DBM and PLG scaffolds. DNA content increased more than 10-fold on RBM compared to DBM and PLG; likewise, osteogenic gene expression was significantly increased after 1 and 2 weeks. We demonstrated that ASI remineralization has the capacity to fabricate mechanically stiff and biocompatible RBM, a suitable biomaterial for cell culture applications.

Antigen removal for the production of biomechanically functional, xenogeneic tissue grafts

Xenogeneic tissues are derived from other animal species and provide a source of material for engineering mechanically functional tissue grafts, such as heart valves, tendons, ligaments, and cartilage. Xenogeneic tissues, however, contain molecules, known as antigens, which invoke an immune reaction following implantation into a patient. Therefore, it is necessary to remove the antigens from a xenogeneic tissue to prevent immune rejection of the graft. Antigen removal can be accomplished by treating a tissue with solutions and/or physical processes that disrupt cells and solubilize, degrade, or mask antigens. However, processes used for cell and antigen removal from tissues often have deleterious effects on the extracellular matrix (ECM) of the tissue, rendering the tissue unsuitable for implantation due to poor mechanical properties. Thus, the goal of an antigen removal process should be to reduce the antigen content of a xenogeneic tissue while preserving its mechanical functionality. To expand the clinical use of antigen-removed xenogeneic tissues as biomechanically functional grafts, it is essential that researchers examine tissue antigen content, ECM composition and architecture, and mechanical properties as new antigen removal processes are developed.