Physico-chemical, functional, morphological, thermal properties and digestibility of Talipot palm (Corypha umbraculifera L.) flour and starch grown in Malabar region of South India

Impact of variety and drying methods on the physicochemical, functional, and thermal properties of Ethiopian potato (Plectranthus edulis) tuber flour

This study aimed to analyse the physicochemical, structural, functional, and thermal properties of flour from two indigenous Ethiopian Potato (Plectranthus edulis) varieties, Chanqua and Loffo, and to compare with wheat flour (WF). The study also investigated how oven and sun drying methods affected the physicochemical properties of the flours. The results demonstrated a significant distinction (p ≤ 0.05) between the flour samples and WF, attributable to variations in both the varieties and the drying methods except that no significant difference in pH was observed due to the varieties, and the fibre and ash content did not vary significantly with the drying methods. The moisture content (MC) of the flours ranged from 5.72 % in oven-dried Chanqua Ethiopian potato flour (OD-CEPF) to 7.53 % in sun-dried Loffo Ethiopian potato flour (SD-LEPF), both of which were lower compared to WF. The protein content varied from 4.47 % (SD-CEPF) to 5.93 % (OD-LEPF). FTIR tests revealed a significant impact on the structural changes, leading to variations in the location and intensity of infrared absorption peaks, particularly in sensitive regions. Whereas, the XRD patterns showed characteristic B-type diffraction, with a relative crystallinity (RC) of 31.97 % in CEPF and 30.53 % in LEPF having a significant difference (p ≤ 0.05) between them. LEPF had better flow properties than CEPF, with lower Hausner ratio (HR) (1.16 vs. 1.25), Carr's index (CI) (14.51 % vs. 20.26 %), and angle of repose (31.00° vs. 34.67°). It also showed significantly higher (p ≤ 0.05) water absorption capacity (WAC), oil absorption capacity (OAC) and swelling power (SP) properties than CEPF. The study also indicated notable distinctions in the thermal and paring properties of flours. The oven drying method was found to be superior in enhancing the physicochemical properties, with LEPF showing better physicochemical, functional, structural, and thermal properties than CEPF.

Controlled ethanol-mediated polyphenol removal from sunflower meal: Impact on physicochemical, structural, flow-behavior, and functional characteristics of isolated proteins

BACKGROUND

Polyphenols present in sunflower meal act on sunflower proteins by reacting directly with their structures and thus influencing their purity, solubility, crystallinity, and functionality. However, the effect on these properties of varying concentrations of ethanol used in dephenolization has yet to be explored. The present study aimed to explore the impact of dephenolization using varying ethanol concentrations (60%, 70%, 80%, and 90%) on the physicochemical, color, thermal, structural, functional, and flow behavior of protein isolates extracted from sunflower meal.

RESULTS

Protein isolates originating from meals that were dephenolized using higher ethanol concentrations exhibited a protein content of 836.10 g kg-1. As the concentration of ethanol increased, a reduction in crystallinity was observed from 24% to 14.15%. Fourier transform infrared (FTIR) spectroscopy revealed marked shifts in major peaks within the 1600 to 1700 cm-1 wavelength range, indicating significant structural and conformational changes. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) results demonstrated that dephenolization caused decline in molecular weight ranging from 25 kDa to 60 kDa. Dephenolization induced significant changes in surface morphology resulting in more heterogeneous and disordered surfaces as indicated by field emission-scanning electron microscopy (FE-SEM) micrographs. Overall improvement in the functional properties was observed, with an increase in solubility from 15.20% to 22.03%. Improvement in the flow behavior with an increase in porosity from 38% to 60% was also observed, due to dephenolization.

CONCLUSION

Dephenolization using 90% ethanol induced structural changes that enhanced physicochemical and functional characteristics of sunflower protein isolates by improving purity and solubility, reducing crystallinity, and increasing flow behavior. © 2024 Society of Chemical Industry.

Exploring differences in the physicochemical and nutritional properties of mango flours and starches

Mangoes contain several components that are beneficial for health, in addition to being potential sources of starch for the food industry. However, a substantial amount of fruit is lost in the field because it does not meet commercial standards, resulting in food losses and environmental damage. Herein, the physicochemical properties of mango flours and starches obtained from different parts of the fruit of two cultivars were evaluated. Mango peel flours have higher levels of proteins, fibers, minerals, carotenoids, ascorbic acid, and antioxidant activity than pulp flours, in addition to a higher yellowing index and water and oil-holding capacity, and can be used as a functional flour. The pulp flours, with the higher starch content, showed characteristics that make them valuable as a potential ingredient in soft baking and gluten-free products. Mango starches have circular and oval shapes, with a bimodal distribution. All starches showed an A-type crystallinity pattern. Pulp starches showed a higher peak viscosity and breakdown, with a lower setback, and can be used as a thickening or gelling agent. The higher thermal stability of kernel starch suggests its application in sauces, baking, dairy products, and canned foods.

Revealing the Mechanism of Ink Flaking from Surfaces of Palm Leaves (Corypha umbraculifera)

Palm leaves are the primary literary support in South and Southeast Asia before the widespread use of paper. However, palm leaf manuscripts face the threat of information loss due to the persistent issue of ink flaking during long-term preservation. Herein, we focus on studying the botanical structure, surface properties, and surface composition of palm leaves to gain an insightful understanding of the mechanism of ink flaking. According to the surface energy analysis, the surface of palm leaves is dominated by the dispersive component due to the presence of hydrophobic substances, resulting in the weak interaction between the handwriting and palm leaves. Moreover, the accumulation of silicon on palm leaves creates a "cuticle-silicon double layer", leading to a dense structure that hinders deep ink absorption. These two main reasons are considered to cause the ink flaking easily, which is further proven by the ink flaking test with the simulated palm leaf manuscripts. To the best of our knowledge, this is the first in-depth technical study on the adhesion performance of handwriting on plant leaves. This work also provides a theoretical basis for the study of the deterioration, adhesive repair, enhancement of flexibility, handwriting reinforcement, and beyond, which contributes to the conservation of precious palm leaf manuscripts.

Structural, Thermal, Rheological, and Morphological Characterization of the Starches of Sweet and Bitter Native Potatoes Grown in the Andean Region

This study aimed to extract and characterize the morphological, physicochemical, thermal, and rheological properties of the starches of native potatoes grown in the department of Puno. Among the varieties evaluated were sweet native potato varieties Imilla Negra (Solanum tuberosum spp. Andígena), Imilla Blanca (Solanum tuberosum spp. Andígena), Peruanita, Albina or Lomo (Solanum chaucha), and Sutamari, and the bitter potatoes Rucki or Luki (Solanum juzepczukii Buk), Locka (Solanum curtilobum), Piñaza (Solanum curtilobum), and Ocucuri (Sola-num curtilobum), acquired from the National Institute of Agrarian Innovation (INIA-Puno). The proximal composition, amylose content, and morphological, thermal, and rheological properties that SEM, DSC, and a rheometer determined, respectively, were evaluated, and the data obtained were statistically analyzed using a completely randomized design and then a comparison of means using Tukey's LSD test. The results show a significant difference in the proximal composition (p ≤ 0.05) concerning moisture content, proteins, fat, ash, and carbohydrates. Thus, the amylose content was also determined, ranging from 23.60 ± 0.10 to 30.33 ± 0.15%. The size morphology of the granules is 13.09-47.73 µm; for the thermal and rheological properties of the different varieties of potato starch, it is shown that the gelatinization temperature is in a range of 57 to 62 °C and, for enthalpy, between 3 and 5 J/g.

Physicochemical Composition and Antioxidant Activity of Five Gari Processed from Cassava Roots (Manihot esculenta Crantz) Harvested at Two Different Maturity Stages and Two Seasons

Gari is a partially gelatinized roasted fermented granular white or yellowish product made from storage roots of cassava. It is consumed as fast foods in many countries across the world. Physicochemical composition, particle size, colour, and antioxidant activities of five gari (92/0326, 96/1414, IRAD4115, EN, and AD) processed from fresh storage roots harvested at 12 months after planting (MAP) and 15MAP compared to four (4) commercial gari (M1, M2, M3, and M4) were evaluated. The analytical results revealed that colour value b∗ and particle size varied significantly (p < 0.05) among the gari samples. Bound flavonoid contents were lower than free flavonoids (3.93 to 10.50 mgQE/100 g and 2.40 to 8.85 mgQE/100 g, respectively). Fourier transform infrared confirmed the functional groups in all gari samples. The antioxidant activity of the bound phenolics showed significantly (p < 0.05) higher DPPH scavenging ability than free phenolics (gari M2: 2.70 μgTE/g). Similarly, the bound phenolics showed significant (p < 0.05) variation of HRSA scavenging activity (0.18-35.09 μgTE/g). However, the best HRSA scavenging activity was found with bound phenolics of gari 96/1414, whereas HRSA scavenging activity was not detected in gari 92/0326, 96/1414, and AD. The value of ABTS scavenging activity of gari varied significantly (p < 0.05) from 20.60 to 30.17 μgTE/g and from 20.70 to 34.39 for free and bound phenolics, respectively, while free phenolics showed higher FRAP value (7.97 mgTE/g) than the bound phenolics (4.59 mgTE/g). Additionally, phenolics and antioxidant activities showed significantly (p < 0.05) a positive correlation. The present study has provided an insight into the physicochemical composition, bioactive compounds, and antioxidant activities of various gari processed at different season and maturity period of harvesting. It reveals that consumers of cassava gari can get health benefits apart from the nutritional values.

Chachafruto starch: Physicochemical characterization, film-forming properties, and 3D printability

This work aimed to characterize the physicochemical, film-forming properties, and 3D printability of a nonconventional starch from chachafruto. The chachafruto native starch (CHS) presented an excellent extraction yield (10 % db) and purity (99 % db), along with an oval and round morphology, a smooth surface with few defects, and a mean diameter of 15.4 μm. The typical B-type diffraction pattern was observed in the CHS with a crystallinity of 17.4 %. The starch presented a paste temperature of 66.1 °C, an enthalpy of 11.5 J g-1, and a final viscosity of 596 Brabender Units. The thermal analysis demonstrated good thermal stability. The evaluated film presented a reduction in crystallinity (8.18 %) to the CHS, which generated a good elasticity in the material. Likewise, it presented a continuous structure without cracks, providing good barrier properties (2.3 × 10-9 g∙m-1∙s-1∙Pa-1) and high transparency. Meanwhile, 3D prints prepared with CHS showed good textural properties and high consistency. The morphological analysis showed that the prints generated organized cell structures. However, high concentrations of CHS were not efficient in obtaining 3D prints. The results of this work demonstrate the tremendous industrial potential of chachafruto as an unconventional source of starch and some alternative uses for adding value to the crop.

Effect of Single and Dual Modifications on Properties of Lotus Rhizome Starch Modified by Microwave and γ-Irradiation: A Comparative Study

A comparative study between two novel starch modification technologies, i.e., microwave (MI) and γ-irradiation (IR), is of important significance for their applications. The objective of this work is to compare the changes in lotus rhizome starch (LRS) subjected to single modifications by MI (thermal treatment) and IR (non-thermal treatment), and dual modification by changing the treatment sequence, i.e., microwave followed by irradiation (MI-IR) and irradiation followed by microwave (IR-MI). The amylose content of native and modified LRS varied from 14.68 to 18.94%, the highest and lowest values found for native and MI-LRS, respectively. IR-treated LRS showed the lowest swelling power (4.13 g/g) but highest solubility (86.9%) among native and modified LRS. An increase in light transmittance value suggested a lower retrogradation rate for dual-modified starches, making them more suitable for food application at refrigeration and frozen temperatures. Dual-modified LRS showed the development of fissures and dents on the surface of granules as well as the reduction in peak intensities of OH and CH2 groups in FTIR spectra. Combined modifications (MI and IR) reduced values of pasting parameters and gelatinization properties compared to native and microwaved LRS and showed improved stability to shear thinning during cooking and thermal processing. The sequence of modification also affected the rheological properties; the G′ and G″ of MI-IR LRS were lower (357.41 Pa and 50.16 Pa, respectively) than the IR-MI sample (511.96 Pa and 70.09 Pa, respectively), giving it a soft gel texture. Nevertheless, dual modification of LRS by combining MI and IR made more significant changes in starch characteristics than single modifications.

Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments

Talipot starch, a non-conventional starch source with a high yield (76%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08%.

Talipot palm (Corypha umbraculifera L.) a nonconventional source of starch: Effect of citric acid on structural, rheological, thermal properties and in vitro digestibility

Starch from talipot palm trunk (Corypha umbraculifera L.), a new starch source, was treated with different citric acid concentrations (5%, 10%, 20%, and 40% of the dry weight of starch) to produce citrate starch. The influence of citric acid treatment on physicochemical, pasting, structural, thermal, rheological, and digestibility properties of talipot palm starch were studied. A new peak at 1728 cm^-1 was observed in the Fourier-transform infrared spectroscopy (FTIR) spectra of citric acid-treated starches, which confirmed the formation of an ester bond between starch molecule and citric acid. The crystalline pattern of talipot palm starch was unaffected by citric acid treatment, whereas the relative crystallinity decreased from 16.35% to 3.06%. The Rapid Visco Analysis of starch treated with citric acid did not show any characteristic peaks, however, the untreated starch showed a peak viscosity of 3646 cP. The gelatinization parameters decreased with an increase in the degree of substitution, and the enthalpy of gelatinization (ΔH_gel) decreased from 11.19 J/g to 6.37 J/g. The in-vitro digestibility of talipot palm starch was decreased by citric acid treatment, and that of the slowly digestible starch (SDS) and resistant starches (RS) increased significantly (p ≤ 0.05) from 31.71% to 39.43% and 37.55% to 53.38%, respectively.

Banana pseudostem substitution in wheat flour biscuits enriches the nutritional and antioxidative properties with considerable acceptability

Biscuits prepared from composite flours substituted with unconventional plant resources have been considered important for enriching the overall nutritional quality. The present study was undertaken to explore the potential of banana pseudostem flour for the valorization of wheat flour biscuits. At the same time, the study attempts to address the problem of bioresource wastage as huge amounts of banana pseudostem are wasted every year after harvesting of the fruits. In this study, composite flours were prepared by partially substituting wheat flour with banana pseudostem core flour (BPF10, BPF20, BPF30) in different proportions (10, 20, 30% w/w), and biscuits were prepared from these composite flour formulations. Analyses of the physicochemical properties, pasting properties, colour and texture, quantification of phytochemicals and antioxidant properties, and overall sensory evaluation of the flours and biscuits were performed for comparative evaluation. BPF-substituted composite flours showed higher moisture and ash content, pasting temperature and water and oil absorption capacity. BPF-fortified biscuits were found to be rich in ash content, protein, proline, antioxidative phytochemicals, viz. phenols, flavonoids, tannins, ascorbate, and alkaloids, whereas fat, moisture content, and viscosity were comparatively lower than that of the control (wheat flour biscuits). Significant free radical scavenging activities of the BPF-substituted biscuits were also observed. Colour and texture analysis showed desirable changes in lightness (L*), yellowness (b*), chroma (C*), fracturability, and hardness of the BPF-substituted biscuits. Most importantly, considering the sensory characteristics like taste and crispiness, control and BPF10 biscuits were highly comparable. Therefore, the formulation of BPF-substituted biscuits presents an effective way to utilize banana pseudostems, which is also rich in nutraceutical and antioxidative properties.