Physicochemical properties of chitosan-based films incorporated with limonene

Waste to wealth: Polyhydroxyalkanoates (PHA) production from food waste for a sustainable packaging paradigm

The growing demand for sustainable food packaging and the increasing concerns regarding environmental pollution have driven interest in biodegradable materials. This paper presents an in-depth review of the production of Polyhydroxyalkanoates (PHA), a biodegradable polymer, from food waste. PHA-based bioplastics, particularly when derived from low-cost carbon sources such as volatile fatty acids (VFAs) and waste oils, offer a promising solution for reducing plastic waste and enhancing food packaging sustainability. Through optimization of microbial fermentation processes, PHA production can achieve significant efficiency improvements, with yields reaching up to 87 % PHA content under ideal conditions. This review highlights the technical advancements in using PHA for food packaging, emphasizing its biodegradability, biocompatibility, and potential to serve as a biodegradable alternative to petroleum-based plastics. However, challenges such as high production costs, mechanical limitations, and the need for scalability remain barriers to industrial adoption. The future of PHA in food packaging hinges on overcoming these challenges through further research and innovation in production techniques, material properties, and cost reduction strategies, along with necessary legislative support to promote widespread use.

Application of chitosan films incorporated with Zanthoxylum limonella essential oil for extending shelf life of pork

This study aimed to produce chitosan films incorporated with Zanthoxylum limonella essential oil for extending shelf life. The volatile compounds of Z. limonella essential oil were identified by gas chromatography-mass spectrometry consisting of limonene, α-phellandrene, ρ-cymene, and sabinene as major compounds. In this study, the addition of Z. limonella essential oil at concentrations of 0 %, 2 %, and 4 % in chitosan film was assessed for its antibacterial activity against Escherichia coli and Staphylococcus aureus. Chitosan film incorporated with 4 % essential oil demonstrated the most significant antibacterial effect against E. coli and S. aureus in comparison to the chitosan film without essential oil due to the synergistic effects on antibacterial activity. The physical and mechanical properties of the chitosan films incorporated with Z. limonella oil developed were also assessed. The addition of essential oil to chitosan films led to improvements in mechanical strength and flexibility, while minimal changes were observed in terms of water solubility, water vapor permeability, and thermal stability. The findings emphasize that this innovative film not only extends the shelf life of pork without chemical preservatives but is also a fully bio-based material. Consequently, it shows great potential to be used as active packaging within the food industry.

Limonene and its derived oligomer as bioactive additives in starch/coffee husks biocomposites for food packaging applications

In this study, antioxidant, and antimicrobial starch-based biocomposite films reinforced with coffee husks (S/CH) were developed by incorporating either limonene (LM) (S/CH/LM) or its oligomer derivative, poly(limonene) (PLM) (S/CH/PLM), at different concentrations (5-10 % w/w of starch). Through a comprehensive assessment of film properties, morphology, and structure, a comparative analysis between the two additives was proposed. Scanning electron microscopy (SEM) revealed some defects throughout the polymer matrix after additive incorporation. The tensile strength (TS) and modulus of elasticity (ME) showed a decrease upon the inclusion of both LM and PLM, while the elongation at break (E) increased. Notably, PLM exhibited outstanding antioxidant capacity, enhancing the films by 108 % over control samples. Additionally, at just 5 % concentration, PLM effectively inhibited the growth of Escherichia coli ATCC 11775 (35.33 ± 2.52 mm) and demonstrated an impressive UV-Vis barrier, comparable to the highest amount of LM incorporated. Therefore, this research highlights the potential of coffee husk-reinforced starch biocomposites with limonene-derived additives as a promising solution for food packaging applications. The comparative analysis sheds light on the advantages of using the PLM in terms of antioxidant and antimicrobial properties, contributing to the advancement of active packaging technologies.

Improving chitosan performance in the simultaneous adsorption of multiple polycyclic aromatic hydrocarbons by oligo(β-pinene) incorporation

The occurrence of persistent organic pollutants in aquatic bodies, namely polycyclic aromatic hydrocarbons (PAHs), has been increasingly detected. The presence of such contaminants represents a serious threat to human health due to their toxicity. Therefore, aiming to provide a novel and efficient alternative for PAHs' removal from water, the present study assesses the effect of oligo(β-pinene) blended with chitosan for the adsorption of these pollutants. Oligo(β-pinene) with phenyl end-groups was synthesized by organocatalyzed atom transfer radical polymerization (O-ATRP) and incorporated in different concentrations (6, 12, and 18 %) to chitosan films. The oligo(β-pinene) loading in the chitosan matrix impressively improved this polysaccharide adsorption capacity. The formulation containing 12 % of oligomer demonstrated a contaminant removal performance three times higher (298.82 %) than pure chitosan during only 1 h of the decontamination process. Adsorption isotherms showed an improved uptake of PAHs with the increase of the contaminants' concentration in the aqueous media due to the formation of a higher concentration gradient. Additionally, a comprehensive characterization of oligo(β-pinene)/chitosan formulation was performed to provide a better understanding of the interactions between the components of the blends. Overall, it was concluded that oligo(β-pinene)/chitosan blends can be used as a high-performance and sustainable alternative for PAHs removal.

Development of Pomegranate Peel Extract and Nano ZnO Co-Reinforced Polylactic Acid Film for Active Food Packaging

The multifunctional packaging used for fresh food, such as antioxidant and antimicrobial packaging, can reduce food waste. In this work, a polylactic acid (PLA)-based composite film with antioxidant and antibacterial properties was prepared by using nano-zinc oxide (ZnONPs) and pomegranate peel extract (PEE) via the solvent-casting method. Different amounts of PEE (0.5, 1, 1.5 and 2 wt%) and 3 wt% ZnONPs were added to PLA to produce the active films. The results of various characterizations (SEM, XRD, etc.) showed that ZnONPs and PEE were uniformly dispersed in PLA film. Compared to PLA films, the PLA/ZnONPs/PEE films showed an increased UV barrier, water vapor permeability and elongation at break, and decreased transparency and tensile strength. In addition, the antioxidant activity of the composite film was evaluated based on DPPH and ABTS. The maximum DPPH and ABTS scavenging activities of PLA/ZnONPs/PEE were 96.2 ± 0.8% and 93.1 ± 0.5%. After 24 h, PLA/ZnONPs/PEE composite film inhibited 1.4 ± 0.05 Log CFU/mL of S. aureus and 8.2 ± 0.35 Log CFU/mL of E. coli, compared with the blank group. The results showed that PLA/ZnONPs/PEE composite film had good antibacterial and antioxidant activities. Therefore, the composite film showed great potential for food packaging.

Double-Layered Films Based on Furcellaran, Chitosan, and Gelatin Hydrolysates Enriched with AgNPs in Yerba Mate Extract, Montmorillonite, and Curcumin with Rosemary Essential Oil

Double-layered active films based on furcellaran (1st layer-FUR), chitosan, and gelatin hydrolysates (2nd layer-CHIT+HGEL) were successfully prepared. Bioactive ingredients were added to the 1st film layer: AgNPs, which were synthesized in situ with yerba mate extract; montmorillonite clay (MMT); and different loads of ethanolic curcumin (CUR) extract enriched with rosemary essential oil (REO). SEM images confirmed the presence of AgNPs with a size distribution of 94.96 ± 3.33 nm throughout the films, and AFM and SEM photos indicated that the higher substance concentrations had rougher and more porous film microstructures. However, the water vapor transmission rate was reduced only at the lowest load of this ingredient. Despite the tensile strength of the films having decreased, the incorporation of the compounds showed a tendency towards reducing the modulus of elasticity, resulting in a lower stiffness of the composites. The addition of CUR and AgNPs improved the UV light barrier properties of the materials. The presented films showed quick reactions to changes in the pH value (from orange to red along with an increase in pH from 2 to 10), which indicates their potential use as indicators for monitoring the freshness of food products. Composite No. 2 showed the highest antimicrobial potential, while none of the presented films showed an antifungal effect. Finally, the antioxidant activities of the films increased dramatically at higher AgNP and CUR loads, suggesting an outstanding potential for active food packaging applications.