Novel magnetic nanoparticles as adsorbent in ultrasound-assisted micro-solid-phase extraction for rapid pre-concentration of some trace heavy metal ions in environmental water samples: desirability function

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Selective and fast magnetic dispersive solid phase micro-extraction of copper and lead in water and vegetables after synthesis of magnetic mesoporous carbon

Magnetic mesoporous carbon (Fe3O4@C, MMC) was synthesized and characterized. It was used for the first time as a sorbent for the magnetic dispersive solid phase microextraction (M-dSPμE) of copper and lead in water and vegetables. FAAS was used to determine the analyte concentrations after elution. The MMC was found to be have surface area of 145.9 m2 g-1 and average pore diameter of 15 nm. The analytical parameters affecting M-dSPμE of copper and lead were optimized. They were pH of sample, 6; eluent, 2 mol L-1 HCl (3 mL); and sample volume, 250 mL. The MMC reaches equilibrium very fast without vortexing for adsorption and only 5 s for elution. The LOD and PF of the M-dSPμE method for copper and lead were found to be 0.87 μg L-1 and 83 for Cu(II) and 2.8 μg L-1 and 167 for Pb(II), respectively. The precision of the M-dSPμE method was found to be ≤ 3.2%. The M-dSPμE method was verified by certificate reference materials (TMDA-53.3 Fortified Lake water and NIST SRM 1573a Tomato Leaves). It was successfully applied to the determination of copper and lead in lake water, wastewaters, sea water, radish, spinach, lettuce, and celery samples.

Environmentally friendly nanoflower Al2O3@carbon spheres as adsorbent for dispersive solid-phase microextraction of copper and lead in food and water samples

A fast and simple dispersive solid-phase microextraction method (d-SPμE) was described for the determination of copper and lead in food, water, and sediments using FAAS. Firstly, nanoflower Al2O3@carbon spheres composite (NF Al2O3@CSs) was synthesized and then characterized. The obtained NF Al2O3@CSs was used for the d-SPμE of copper and lead in aqueous solutions. The influence of important parameters like pH, contact time, eluent conditions, volume of sample, and competing ion effects on the d-SPμE efficiency of copper and lead was investigated. They were pH, 7; eluent, 2 mol L-1 HCl (2 mL); sample volume, 250 mL for copper and 150 mL for lead with recoveries ≥90%. The adsorption and elution of analytes on NF Al2O3@CSs were realized quickly without vortexing. The LODs of the d-SPμE for copper and lead were found to be 0.69 μg L-1 and 2.8 μg L-1, respectively, while its PF was 125 for copper and 75 for lead. The intra-day precision and inter-day repeatability (RSD%, n = 7) were 1.3% and 1.6% for Cu(II) and 2.3% and 3.2% for Pb(II), respectively. Finally, the accuracy of the d-SPμE was investigated by determination of the analytes in four certified reference materials (TMDA-53.3 Lake water, NW-TMDA-54.6 Lake water, NIST 1573a Tomato leaves, and NIST RM 8704 Buffalo River Sediment). The analyte recoveries together with analyses of dam water, river water, wastewater, sea water, sumac, tea, chocolate, and lentils were studied. The results indicate that recoveries ranged from 90 to 103% in water samples and 91 to 110% in food samples.

Nickel hydroxide nanoflower-based dispersive solid-phase extraction of copper from water matrix

In this work, a dispersive solid-phase extraction method based on Ni(OH)₂ nanoflowers (Ni(OH)₂-NFs-DSPE) was developed to separate and preconcentrate copper ions from tap water samples for determination by flame atomic absorption spectrometry (FAAS). Ni(OH)₂-NFs was synthesized using a homogeneous precipitation technique and used as sorbent for copper preconcentration. X-ray diffraction, scanning electron microscopy, and Fourier-transform infrared spectroscopy were used to characterize the synthesized sorbent. All experimental variables were carefully optimized to achieve a high enhancement factor of 107.5-folds with respect to the detection sensitivity of the conventional FAAS. The proposed method's analytical parameters including LOD, LOQ, and linear range were determined as 1.33 μg/L, 4.42 μg/L, and 3.0-40 μg/L, respectively. To assess the applicability and reliability of the developed method, optimal conditions were applied to tap water samples and satisfactory percent recoveries (94-103%) were obtained for the samples spiked at 20 and 30 μg/L. This validated the accuracy and feasibility of the developed method to real samples. The developed method can be described as a simple, efficient, and rapid analytical approach for the accurate determination of trace copper ions in water samples.

Biocompatible magnetite nanoparticles coated with ionic liquid-based surfactantas a hydrophilic sorbent for dispersive solid phase microextraction of cephalosporins prior to their quantitation by HPTLC

Extraction of highly hydrophilic compounds from biological fluids including urine or plasma samples is a dilemma due to high hydrophilicity of the matrix itself. The main aim of the current work is to explore the competence of ionic liquid (IL)-based surfactant-coated mineral oxide nanoparticles (NPs) in dispersive solid-phase microextraction (d-SPME) of highly hydrophilic analytes taking cefoperazone (CPZ) as a model analyte for the study. The IL-based surfactant coated Fe₃O₄ NPs is utilized as an innovative adsorbent for the separation and pre-concentration of CPZ after intramuscular injection (I.M) in rabbits. The utilized magnetite NPs were synthesized via simple and reliable co-precipitation procedure, which doesn't require any air-free environment and depends on a single iron (III) salt. Characterization of the as-synthesized NPs was achieved by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX). Surface area measurements show that Fe₃O₄ NPs have large surface area of 75 m² g^-1. The developed approach utilizes the unique properties of the IL-based surfactant including multiple polar interaction types provided by the polar head in addition to merits of Fe₃O₄ nanoparticles, which include large adsorptive capacity and magnetic properties, to improve separation, save time, and achieve satisfactory recovery. Comprehensive study was developed for the factors, that affect the adsorption capacity such as pH, NPs amount, IL-based surfactant concentration, ionic strength, adsorption time, and desorption conditions. Moreover, the adsorption data was fitted to Langmuir and second-order kinetic models as reflected by the reasonable determination coefficients of 0.9319 and 0.9726, respectively. Under the optimized conditions, the developed approach achieves good correlation coefficient of 0.9975, and 0.9981 over linearity range of 0.7-12.0 and 4.0-50.0 µg mL^-1 for both CPZ standard solutions and spiked rabbit plasma, respectively. It also provides good sensitivity expressed by the low values of limit of detection (LOD) of 0.2 and 1.2 µg mL^-1 and limit of quantitation (LOQ) of 0.7 and 4.0 µg mL^-1 for both the standard solutions and spiked plasma, respectively. The developed approach was also applied successfully for monitoring CPZ in rabbit plasma samples with satisfactory recovery % (83-110). In addition, a detailed pharmacokinetic study is performed where pharmacokinetic parameters of CPZ in rabbit plasma samples were calculated.

A new strategy for the combination of supramolecular liquid phase microextraction and UV-Vis spectrophotometric determination for traces of maneb in food and water samples

A novel and green method was developed for enrichment of maneb (manganese ethylene-bisdithiocarbamate) with a supramolecular solvent liquid phase microextraction method. The microextraction method has been used for the first time in the literature for separation-preconcentration of maneb. 1-decanol and tetrahydrofuran were used in the supramolecular solvent formation. The Mn²⁺ content of maneb was extracted in the supramolecular solvent phase as 1-(2-pyridylazo)-2-naphthol complex at pH 12.0. Manganese concentration was determined by UV-Vis spectrophotometer at 555 nm. Then, the maneb concentration equivalent to manganese concentration was calculated. The analytical parameters which effective in the method, including pH, volume of reagents, and sample volume were optimized. The limit of detection and the limit of quantification values for maneb were calculated as 2.22 μg L^-1 and 7.32 μg L^-1, respectively. The method was successfully applied in the analysis of the maneb content of water and food samples.