Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Facile Green Gamma Irradiation of Water Hyacinth Derived-Fluorescent Carbon Dots Functionalized Thiol Moiety for Metal Ion Detection

Fluorescent sensor-based carbon dots (CDs) have significantly developed for sensing metal ions because of their great physical and optical properties, including tunable fluorescence emission, high fluorescence quantum yield, high sensitivity, non-toxicity, and biocompatibility. In this research, a green synthetic approach via simple gamma irradiation for the carbon dot synthesis from water hyacinth was developed since water hyacinth has been classified as an invasive aquatic plant containing cellulose, hemicellulose, and lignin. The thiol moiety (SH) was further functionalized on the surface functional groups of CDs as the "turn-off" fluorescent sensor for metal ion detection. Fluorescence emission displayed a red shift from 451 to 548 nm when excited between 240 and 500 nm. The quantum yield of CDs-SH was elucidated to be 13%, with strong blue fluorescence emission under ultraviolet irridiation (365 nm), high photostability and no photobleaching. The limit of detection was determined at micromolar levels for Hg2+, Cu2+, and Fe3+. CDs-SH could be a real-time monitoring sensor for Hg2+ and Cu2+ as fluorescence quenching was observed within 2 min. Furthermore, paper test-strip based CDs-SH could be applied to detect these metal ions.

Increasing detection sensitivity of fluorescent polymeric sensors containing fluorescein derivatives by Au NPs

New fluorescent polymeric sensors containing in situ photogenerated gold nanoparticles (Au NPs) and fluorescein-based copolymers are reported. They are tested as efficient fluorescent chemosensors for the sensitive detection of toxic divalent metal ions, such as Co²⁺, Cu²⁺, Cd²⁺, (UO₂)²⁺, Pb²⁺, Zn²⁺and Hg²⁺. Their fluorescence quenching process depends on the concentration of metal cations and is comparatively analyzed for both the starting copolymers and the corresponding hybrid materials. Thus, the best results are recorded for uranyl (4 × 10^-6 M) and copper ions (16 × 10^-6 M), respectively. The detection limits of the investigated hybrid materials are lower by an order of magnitude compared to the starting copolymers, while the fluorescence quenching mechanism mainly occurred by a dynamic process, following a linear Stern-Volmer relationship. Thus, the report fundamentally confirms the influence of small amounts of Au NP (2 wt%) on the improved sensitivity of the final fluorescent sensors.

Colorimetric multi-channel sensing of metal ions and advanced molecular information protection based on fish scale-derived carbon nanoparticles

Some nanosystems based on carbon nanomaterials have been used for fluorescent chemical/biosensing, elementary information processing, and textual coding. However, little attention has been paid to utilizing biowaste-derived carbon nanomaterials for colorimetric multi-channel sensing and advanced molecular information protection (including text and pattern information). Herein, fish scale-derived carbon nanoparticles (FSCN) were prepared and used for colorimetric detection of metal ions, encoding, encrypting and hiding text- and pattern-based information. The morphology and composition of FSCN were analyzed by TEM, XRD, FTIR, and XPS, and it was found that the FSCN-based multi-channel colorimetric sensing system can detect Cr⁶⁺ (detection limit of 56.59 nM and 13.32 nM) and Fe³⁺ (detection limit of 81.55 nM) through the changes of absorption intensity at different wavelengths (272, 370, and 310 nm). Moreover, the selective responses of FSCN to 20 kinds of metal ions can be abstracted into a series of binary strings, which can encode, hide, and encrypt traditional text-based and even two-dimensional pattern-based information. The preparation of carbon nanomaterials derived from waste fish scales can stimulate other researcheres' enthusiasm for the development and utilization of wastes and promoting resource recycling. Inspired by this work, more researches will continue to explore the world of molecular information technology.

A novel ratiometric fluorescence probe for the detection of copper (II) and silver(I) based on assembling dye-doped silica core-shell nanoparticles with gold nanoclusters

A creatively designed and constructed a multifunctional ratiometric fluorescence probe is reported by assembling glutathione (GSH)-protected gold nanoclusters (AuNCs) with fluorescein-doped mesoporous silica nanoparticle (FS) for the detection of Cu²⁺ and Ag⁺ ions, which could eliminate most interferences by self-calibration. Under the excitation at 450 nm, the fluorescence connected with AuNCs can rapidly respond by quenching or enhancement, respectively, for Cu²⁺ and Ag⁺ ions, while the fluorescein isothiocyante (FITC) fluorescence served as reference with negligible change. The fluorescence intensity ratio showed good linear relationships with Cu²⁺ and Ag⁺ concentrations in the range 0.5-10 μM and 0.1-8 μM, respectively. The detection limits were as low as 140 nM and 60 nM for Cu²⁺ and Ag⁺ ions, respectively. The color change induced by fluorescent intensity ratio variation could also be employed for visual discrimination. The AuNC-embedded FS (FS-Au) nanoprobe was successfully used for Cu²⁺ and Ag⁺ ion determination in drinking water and intracellular Cu²⁺ imaging, which exhibits promising prospects in cost-effective and rapid determination of both Cu²⁺ and Ag⁺ with good sensitivity and selectivity.

A new Fe/N doped carbon dot naocatalytic amplification-aptamer SERS/RRS/Abs trimode assay platform for ultratrace Pb2

Nanocatalytic amplification of carbon dots is a new way to improve sensitivity. The preparation of the high catalytic activity and stable iron/nitrogen-doped carbon dot (CD_BFe) sol and its application in aptamer (Apt) assay have not been reported yet. In this paper, a simple hydrothermal procedure for the preparation of CD_BFe derived from Fe²⁺-2,2'-bipyridine complex has been developed. It is found that CD_BFe has a strong catalytic effect on the indicator reaction of glyoxal (C₂H₂O₂) reduction of HAuCl₄ to produce gold nanoparticle (AuNP) probe with strong surface enhanced Raman scattering (SERS) at 1617 cm^-1, resonance Rayleigh scattering (RRS) effect at 370 nm and absorption (Abs) at 550 nm. A rapid and sensitive CD_BFe catalytic amplification Apt method for SERS/RRS/Abs trimode detecting ultratrace lead ions was established, based on the Apt reaction mediated the nanocatalytic indicator reaction. The results show that the SERS intensity and Pb(II) concentration have a good linear relationship in the range of 1.3-16 pM, and the detection limit is the lowest. In addition, Hg(II) and As(III) can also be measured by this naocatalytic amplification- Apt assay platform.

Conductive electrospun composite fibers based on solid-state polymerized Poly(3,4-ethylenedioxythiophene) for simultaneous electrochemical detection of metal ions

Conductive composite fibers containing poly (3,4-ethylenedioxythiophene) (PEDOT) and silver nanoparticles (AgNPs) were fabricated by emulsion electrospinning of 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) in toluene together with aqueous solution of poly (vinyl alcohol) (PVA) and silver nanoparticles (AgNPs) in the presence of sodium dodecylsulfate followed by heat treatment at 70 °C to convert DBEDOT to conductive PEDOT via solid state polymerization (SSP). The composite fibers were characterized by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy and thermogravimetric analysis. The PEDOT/PVA/AgNPs composite fibers deposited on a screen-printed carbon electrode (SPCE) surface exhibited good electrochemical response and was applied for simultaneous detection of heavy metal ions in a mixture, namely Zn(II), Cd(II), and Pb(II) via square wave anodic stripping voltammetry (SWASV). With added Bi⁺³ into the detection system, the bismuth film formed on the electrode allows effective alloy formation with the deposited heavy metals obtained upon reduction of the heavy metal ions, the detection of heavy metal ions after stripping was successfully accomplished with a linear range of 10-80 ppb and limits of detections (LOD) of 6, 3 and 8 ppb for Zn(II), Cd(II), and Pb(II), respectively.

Utilization of waste biomass of Poa pratensis for green synthesis of n-doped carbon dots and its application in detection of Mn2+ and Fe3

In this study, a novel and sustainable approach was used to synthesize nitrogen-doped carbon dots (NCDs) from the waste biomass of Poa Pratensis (Kentucky bluegrass (KB)) by a facile hydrothermal method. The prepared KBNCDs were subjected to various characterization techniques, including X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and Fourier-transform infrared spectroscopy to verify the formation of carbon dots and their surface functional groups. The KBNCDs exhibited good hydrophilic fluorescence (FLU) properties with an acceptable quantum yield (7%). The synthesized KBNCDs showed excitation wavelength-dependent FLU emission behavior with strong cyan-blue FLU upon irradiation with 365 nm UV-light. The hydrophilic optical properties of the as-synthesized KBNCDs were used to detect Fe³⁺ and Mn²⁺ ions in an aqueous medium with good selectivity and sensitivity. It was found that the FLU of the KBNCDs is quenched in the presence of Fe³⁺ and Mn²⁺ ions, and the quenching rate was linear with the concentration of Fe³⁺ and Mn²⁺ ions. The limit of detection (LOD) of KBNCDs with metal ions was calculated using the Stern-Volmer relationship. The LOD values for Fe³⁺ or Mn²⁺ ions were calculated as 1.4 and 1.2 μM, respectively with the detection range from 5.0 to 25 μM. Based on these results, this study provides an underpinning for the development of KBNCD as FLU sensors that can be used in aqueous media.

Efficient and portable cellulose-based colorimetric test paper for metal ion detection

Fabrication of metal ion detection materials generally involved problems such as high cost and complicated processes of pretreatment and operation. Herein, a novel colorimetric test paper for metal ions detection was developed based on functionalized cellulose fibers. Acetoacetyl groups were introduced on cellulose fibers by a surface esterification process. The obtained cellulose acetoacetate (CAA) fibers were made into CAA paper via a paper-making process. The CAA paper possessed robust mechanical property, thermal stability selectivity and rapid response to Fe³⁺ and Cu²⁺ ions, with an obvious naked-eye color change within 5 s. The mechanism of this visual recognition for metal ions due to that the acetoacetyl groups coordination chelated with metal ion to form six-membered ring structure, further leading to the color change of the materials. It provided a facile and universal method to prepare efficient and portable cellulose-based test paper, which has great potential in metal ion detection field.

The Preparation of Cu(II)- and Ag(I)-responsive Carbon Nanodots from the Right Amino-acid Carbon Source

Carbon nanodots (CDs) have exhibited excellent sensing capability for various metal ions. However, it is difficult to determine the selectivity of CDs to metal ions. In this work, we chose appropriate carbon source to design CD sensors against Cu(II) and Ag(I). Glycine, histidine and leucine have been confirmed to form complexes with Cu(II) and Ag(I), and were applied to prepare CDs using microwave heating method. The as-prepared CDs inherited the specific ion-binding capability from their carbon source and could response to both Cu(II) and Ag(I). The response sensitivity corresponded to the binding energy between the carbon source and metal ions. These experimental results are very important for the further design of CD sensors for a large variety of analytes.

Simultaneous detection of trace Ag(I) and Cu(II) ions using homoepitaxially grown GaN micropillar electrode

Driven by the motivation to quantitively control and monitor trace metal ions in water, the development of environmental-friendly electrodes with superior detection sensitivity is extremely important. In this work, we report the design of a stable, ultrasensitive and biocompatible electrode for the detection of trace Ag⁺ and Cu²⁺ ions by growing n-type GaN micropillars on conductive p-type GaN substrate. The electrochemical measurement based on cyclic voltammetry indicates that the GaN micropillars exhibit quasi-reversible and mass-controlled reaction in redox probe solution. In the application of trace Ag⁺ and Cu²⁺ determination, the GaN micropillars show superior sensitivity and excellent conductivity by presenting a detection limit of 3.3 ppb for Ag⁺ and 3.3 ppb for Cu²⁺. Comparative studies on the electrochemical response of GaN micropillars and GaN film in the simultaneous Ag⁺ and Cu²⁺ detection reveal that GaN micropillars show three orders of magnitude higher stripping peak current than GaN film. It is assumed that the microarray morphology with large active area and the hydrophilia nature of GaN micropillars are responsible for the excellent sensitivity. This work will open up some opportunities for GaN nanostructure electrodes in the application of trace metal ions detection.

Ultra sensitive detection of Cd (II) using reduced graphene oxide/carboxymethyl cellulose/glutathione modified electrode

The present work describes the electrochemical detection of Cd²⁺ using reduced graphene oxide (rGO), carboxymethyl cellulose (CMC) and glutathione (GSH) modified glassy carbon electrode (GCE) by Square Wave Anodic Stripping Voltammetry (SWASV). The prepared nanocomposite was characterized by X-ray diffraction (XRD), RAMAN, Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS). The influence of experimental parameters such as effect of pH, choice of supporting electrolyte, deposition time and deposition potential, were optimized. Under the optimized conditions, the linear relationship between the current intensity and Cd²⁺ concentration (2-20 nM) was I (μA) = -6.78 (c/nM) + 4.547 (R² = 0.996). The detection limit and sensitivity achieved for the modified electrode were 0.05 nM and 4.5 μA/nM respectively. Finally, rGO/CMC/GSH/GCE was successfully demonstrated for the detection of Cd²⁺ in real samples, and the results were compared with AAS analysis.