Glucose-sensitive liposomes incorporating hydrophobically modified glucose oxidase

Temperature and oxidation-sensitive dioleoylphophatidylethanolamine liposome stabilized with poly(ethyleneimine)/(phenylthio)acetic acid ion pair

Temperature and oxidation-sensitive liposomes were prepared by stabilizing dioleoylphosphatidylethanolamine (DOPE) bilayers with the ion pair of poly(ethyleneimine)/(phenylthio)acetic acid (PEI/PTA). An upper critical solution temperature (UCST) behavior was observed when PEI/PTA ion pair was suspended in an aqueous solution. It was observed that the UCST increased with increasing PTA content. The ion pair was self-assembled into nanospheres owing to its amphiphilic property which was confirmed by transmission electron microscopy. The FT-IR spectroscopic spectrum showed that the ion pair formed a salt bridge between the amino group and the carboxyl group and the PTA content in the ion pair was readily oxidized by H₂O₂. Further, DOPE liposomal membranes could be stabilized with PEI/PTA ion pair. Due to the amphiphilic property, the ion pair played a role as a stabilizer for the formation of DOPE liposomes. The liposome released its payload in a temperature-responsive manner, possibly because when the temperature is raised, the ion pair loses its amphiphilic property and can be detached from the liposomal membrane. The liposome was also oxidation-responsive in terms of release, possibly because the amphiphilic property of the ion pair disappears when the PTA is oxidized.

Recent strategies towards the surface modification of liposomes: an innovative approach for different clinical applications

Liposomes are very useful biocompatible tools used in diverse scientific disciplines, employed for the vehiculation and delivery of lipophilic, ampiphilic or hydrophilic compounds. Liposomes have gained the importance as drug carriers, as the drugs alone have limited targets, higher toxicity and develop resistance when used in higher doses. Conventional liposomes suffer from several drawbacks like encapsulation inefficiencies and partially controlled particle size. The surface chemistry of liposome technology started from simple conventional vesicles to second generation liposomes by modulating their lipid composition and surface with different ligands. Introduction of polyethylene glycol to lipid anchor was the first innovative strategy which increased circulation time, delayed clearance and opsonin resistance. PEGylated liposomes have been found to possess higher drug loading capacity up to 90% or more and some drugs like CPX-1 encapsuled in such liposomes have increased the disease control up to 73% patients suffering from colorectal cancer. The surface of liposomes have been further liganded with small molecules, vitamins, carbohydrates, peptides, proteins, antibodies, aptamers and enzymes. These advanced liposomes exhibit greater solubility, higher stability, long-circulating time and specific drug targeting properties. The immense utility and demand of surface modified liposomes in different areas have led their way to the modern market. In addition to this, the multi-drug carrier approach of targeted liposomes is an innovative method to overcome drug resistance while treating ceratin tumors. Presently, several second-generation liposomal formulations of different anticancer drugs are at various stages of clinical trials. This review article summarizes briefly the preparation of liposomes, strategies of disease targeting and exclusively the surface modifications with different entities and their clinical applications especially as drug delivery system.

Oxidation-Triggerable Liposome Incorporating Poly(Hydroxyethyl Acrylate-co-Allyl methyl sulfide) as an Anticancer Carrier of Doxorubicin

Since cancer cells are oxidative in nature, anti-cancer agents can be delivered to cancer cells specifically without causing severe normal cell toxicity if the drug carriers are designed to be sensitive to the intrinsic characteristic. Oxidation-sensitive liposomes were developed by stabilizing dioleoylphosphatidyl ethanolamine (DOPE) bilayers with folate-conjugated poly(hydroxyethyl acrylate-co-allyl methyl sulfide) (F-P(HEA-AMS)). The copolymer, synthesized by a free radical polymerization, was surface-active but lost its surface activity after AMS unit was oxidized by H₂O₂ treatment. The liposomes with F-P(HEA-AMS) were sensitive to H₂O₂ concentration (0%, 0.5%, 1.0%, and 2.0%) in terms of release, possibly because the copolymer lost its surface activity and its bilayer-stabilizing ability upon oxidation. Fluorescence-activated cell sorting (FACS) and confocal laser scanning microscopy (CLSM) revealed that doxorubicin (DOX)-loaded liposomes stabilized with folate-conjugated copolymers markedly promoted the transport of the anti-cancer drug to cancer cells. This was possible because the liposomes were readily translocated into the cancer cells via receptor-mediated endocytosis. This liposome would be applicable to the delivery carrier of anticancer drugs.

Injectable self-assembled peptide hydrogels for glucose-mediated insulin delivery

Closed-loop glucose-responsive insulin delivery with excellent biocompatibility has the potential to improve the health and quality of life of diabetic patients.

pH-sensitive peptide hydrogel for glucose-responsive insulin delivery

Glucose-responsive system is one of important options for self-regulated insulin delivery to treat diabetes, which has become an issue of great public health concern in the world. In this study, we developed a novel and biocompatible glucose-responsive insulin delivery system using a pH-sensitive peptide hydrogel as a carrier loaded with glucose oxidase, catalase and insulin. The peptide could self-assemble into hydrogel under physiological conditions. When hypoglycemia is encountered, neighboring alkaline amino acid side chains are significantly repulsed due to reduced local pH by the enzymatic conversion of glucose into gluconic acid. This is followed by unfolding of individual hairpins, disassembly and release of insulin. The glucose-responsive hydrogel system was characterized on the basis of structure, conformation, rheology, morphology, acid-sensitivity and the amount of consistent release of insulin in vitro and vivo. The results illustrated that our system can not only regulate the blood glucose levels in vitro but also in mice models having STZ-induced diabetes.

STATEMENT OF SIGNIFICANCE

In this report, we have shown the following significance supported by the experimental results. 1. We successfully developed, characterized and screened a novel pH-responsive peptide. 2. We successfully developed a novel and biocompatible pH-sensitive peptide hydrogel as glucose-responsive insulin delivery system loaded with glucose oxidase, catalase and insulin. 3. We successfully confirmed that the hydrogel platform could regulate the blood glucose level in vitro and in vivo. Overall, we have shown enough significance and novelty with this smart hydrogel platform in terms of biomaterials, peptide chemistry, self-assembly, hydrogel and drug delivery. So we believe this manuscript is suitable for Acta Biomaterialia.

Light- and temperature-responsive liposomes incorporating cinnamoyl Pluronic F127

Light- and temperature-responsive liposomes were prepared by immobilizing cinnamoyl Pluronic F127 (CP F127) on the surface of egg phosphatidylcholine liposomes. CP F127 was prepared by a condensation reaction, and the molar ratio of cinnamoyl group to Pluronic F127 was calculated to be 1:1.4 on (1)H NMR spectrum. The cinnamoyl group of CP F127 was readily dimerized under the irradiation of a UV light (254 nm, 6 W). CP F127 decreased the absolute value of the zeta potential of liposome possibly because it can shift the hydrodynamic plane away from the liposome surface. The size of liposome decorated with CP F127, measured on a dynamic light scattering machine and observed on a TEM, was larger than that of bare liposome. The liposome bearing CP F127 seemed to fuse and aggregate each other. The liposome released calcein, a fluorescence dye, in response to a UV irradiation, possibly because the photo-dimerization of cinnamoyl group perturbs the liposomal membrane. Moreover, the liposome released the dye in response to a temperature change, possible due to the phase transition of Pluronic F127 layer on the liposomal surface or the hydrophobic interaction of the polymer with liposomal membrane.

NANOMATERIALS FOR PROTEIN MEDIATED THERAPY AND DELIVERY

There has been a significant amount of research done on liposomes and nanoparticles as drug carriers for protein drugs. Proteins and enzymes have been used both as targeting moieties and for their therapeutic potential. High specificity and rapid reaction rates make proteins and enzymes excellent candidates for therapeutic treatment, but some limitations exist. Many of these limitations can be addressed by a well studied nanotechnology based delivery system. Such a system can provide a medium for delivery, stabilization of the drugs, and enable site specific accumulation of drugs. Nanomedicines such as these have great potential to revolutionize the pharmaceutical industry and improve healthcare worldwide.

Nanoencapsulation of quercetin and resveratrol into elastic liposomes

Based on the fact that quercetin (QUE) and resveratrol (RES) induce a synergic inhibition of the adipogenesis and increase apoptosis in adipocytes, and that sodium deoxycholate (SDC) has necrotic effects, the nanoencapsulation of QUE and RES into SDC-elastic liposomes is proposed as a new approach for dissolving the subcutaneous fat. The concentration of constituents and the effect of the drug incorporation into cyclodextrin inclusion complexes on the stability of QUE/RES-loaded liposomes were studied. The best liposomal formulation reduced the use of phosphatidylcholine and cholesterol in 17.7% and 68.4%, respectively. Liposomes presented a mean diameter of 149nm with a polydispersion index of 0.3. The zeta potential of liposomes was slightly negative (-13.3mV) due to the presence of SDC in the phospholipid bilayer. Encapsulation efficiency of QUE and RES into liposomes was almost 97%. To summarize, QUE/RES-loaded elastic liposomes are stable and suitable for subcutaneous injection, thereby providing a new strategy for reducing subcutaneous fat.

Liposomes incorporating hydrophobically modified silk fibroin: pH-dependent release

pH-sensitive liposomes were prepared by modifying the surface of egg phosphatidylcholine (EPC) liposomes with hydrophobically modified silk fibroin (HmSF). For the hydrophobic modification of SF, palmitic acid residues were covalently attached to SF through amide bond. According to the result of TNBS assay, about 90% of amino groups of SF participated in the conjugation reaction with palmitic acid N-hydroxysuccinimide ester, and the number of palmitic acid residue per SF molecule was calculated to be 15.3. The fluorescence quenching of calcein in liposomal suspension decreased from about 80-50%, when the ratio of HmSF to phospholipid increased from 1:20 to 1:5. The maximum degree of release from liposomes incorporating HmSF (of which HmSF to phospholipid ratio was 1:20) for 5 min was about 95% at pH 4.5, 25% at pH 5.0, and 5% at pH 5.5, and no appreciable amount of release was observed in the range of pH 6.5 to pH 8.0. Under acidic conditions, HmSF is likely to perturb the packing of phospholipid in liposomal membrane, possibly due to the unionization of the carboxylic groups of the silk protein.