Study on Improvement of Extracellular Production of Recombinant Thermobifida fusca Cutinase by Escherichia coli

Engineered Geobacillus lipolytic enzymes - Attractive polyesterases that degrade polycaprolactones and simultaneously produce esters

Plastic pollution is one of the biggest environmental problems plaguing the modern world. Polyester-based plastics contribute significantly to this ecological safety concern. In this study, lipolytic biocatalysts GD-95RM and GDEst-lip developed based on lipase/esterase produced by Geobacillus sp. 95 strain were applied for the degradation of polycaprolactone films (Mn 45.000 (PCL45000) and Mn 80.000 (PCL80000)). The degradation efficiency was significantly enhanced by the addition of short chain alcohols. Lipase GD-95RM (1 mg) can depolymerize 264.0 mg and 280.7 mg of PCL45000 and PCL80000, films respectively, in a 24 h period at 30 °C, while the fused enzyme GDEst-lip (1 mg) is capable of degrading 145.5 mg PCL45000 and 134.0 mg of PCL80000 films in 24 h. The addition of ethanol (25 %) improves the degradation efficiency ~2.5 fold in the case of GD-95RM. In the case of GDEst-lip, 50 % methanol was found to be the optimal alcohol solution and the degradation efficiency was increased by ~3.25 times. The addition of alcohols not only increased degradation speeds but also allowed for simultaneous synthesis of industrially valuable 6-hydroxyhexonic acid esters. The suggested system is an attractive approach for removing of plastic waste and supports the principles of bioeconomics.

Overexpression and kinetic analysis of Ideonella sakaiensis PETase for polyethylene terephthalate (PET) degradation

Ideonella sakaiensis PET hydrolase (IsPETase) is a well-characterized enzyme for effective PET biodegradation. However, the low soluble expression level of the enzyme hampers its practical implementation in the biodegradation of PET. Herein, the expression of IsPETase^Mut, one of the most active mutants of IsPETase obtained so far, was systematically explored in E. coli by adopting a series of strategies. A notable improvement of soluble IsPETase^Mut was observed by using chaperon co-expression and fusion expression systems. Under the optimized conditions, GroEL/ES co-expression system yielded 75 ± 3.4 mg·L^-1 purified soluble IsPETase^Mut (GroEL/ES), and NusA fusion expression system yielded 80 ± 3.7 mg·L^-1 purified soluble NusA-IsPETase^Mut, which are 12.5- and 4.6-fold, respectively, higher than its commonly expression in E. coli. The two purified enzymes were further characterized. The results showed that IsPETase^Mut (GroEL/ES) displayed the same catalytic behavior as IsPETase^Mut, while the fusion of NusA conferred new enzymatic properties to IsPETase^Mut. Although NusA-IsPETase^Mut displayed a lower initial hydrolysis capacity than IsPETase^Mut, it showed a 1.4-fold higher adsorption constant toward PET. Moreover, the product inhibition effect of terephthalic acid (TPA) on IsPETase was reduced with NusA-IsPETase^Mut. Taken together, the latter two catalytic properties of NusA-IsPETase^Mut are more likely to contribute to the enhanced product release by NusA-IsPETase^Mut PET degradation for two weeks.

High-Level Extracellular Expression of a New β-N-Acetylglucosaminidase in Escherichia coli for Producing GlcNAc

N-acetyl-β-D glucosamine (GlcNAc) is wildly used in cosmetics, nutraceuticals and pharmaceuticals. The traditional chemical process for GlcNAc production from chitin causes serious acidic pollution. Therefore, the enzymatic hydrolysis becomes a great promising and alternative strategy to produce GlcNAc. β-N-acetylglucosaminidase (NAGase) can hydrolyze chitin to produce GlcNAc. Here, a GH3 family NAGase encoding gene BlNagZ from Bacillus licheniformis was expressed extracellularly in Escherichia coli guided by signal peptide PelB. The recombinant BlNagZ presented the best activity at 60°C and pH 5.5 with a high specific activity of 13.05 U/mg. The BlNagZ activity in the fermentation supernatant can reach 13.62 U/mL after optimizing the culture conditions, which is 4.25 times higher than optimization before. Finally, combining BlNagZ with chitinase ChiA we identified before, chitin conversion efficiency to GlcNAc can reach 89.2% within 3.5 h. In all, this study provided not only a high active NAGase, and a secreted expression strategy to reduce the cost of production, which is conducive to the industrial application.

Surface engineering of polyester-degrading enzymes to improve efficiency and tune specificity

Certain members of the carboxylesterase superfamily can act at the interface between water and water-insoluble substrates. However, nonnatural bulky polyesters usually are not efficiently hydrolyzed. In the recent years, the potential of enzyme engineering to improve hydrolysis of synthetic polyesters has been demonstrated. Regions on the enzyme surface have been modified by using site-directed mutagenesis in order to tune sorption processes through increased hydrophobicity of the enzyme surface. Such modifications can involve specific amino acid substitutions, addition of binding modules, or truncation of entire domains improving sorption properties and/or dynamics of the enzyme. In this review, we provide a comprehensive overview on different strategies developed in the recent years for enzyme surface engineering to improve the activity of polyester-hydrolyzing enzymes.

Extracellular expression of Thermobifida fusca cutinase with pelB signal peptide depends on more than type II secretion pathway in Escherichia coli

Our previous studies demonstrated that Thermobifida fusca cutinase is released into culture medium when expressed without a signal peptide in Escherichia coli, and this extracellular expression results from an enhanced membrane permeability caused by cutinase's phospholipid hydrolase activity. The present study investigated whether this phenomenon would also occur during the expression of cutinase fused to pelB signal peptide (pelB-cutinase). Secretion of fusion proteins of this type is generally believed to occur via type II secretion pathway. The results showed that when pelB-cutinase was expressed in a secB knockout strain, which has a defective type II secretion pathway, there was still a large amount of cutinase in the culture medium. Additional experiments confirmed that the periplasmic and cytoplasmic fractions of the expressing cells had hydrolytic activity toward phosphatidyl ethanolamine, and the recombinant cells showed correspondingly improved membrane permeability. All these phenomena were also observed in the parent E. coli strain. Moreover, the secretion efficiency of the inactive cutinase mutant was found to be significantly lower than that of pelB-cutinase in the parent E. coli. Based on these results, the phospholipid hydrolase activity of pelB-cutinase must play a larger role in its extracellular production than does type II secretion pathway.

Synthetic polyester-hydrolyzing enzymes from thermophilic actinomycetes

Thermophilic actinomycetes produce enzymes capable of hydrolyzing synthetic polyesters such as polyethylene terephthalate (PET). In addition to carboxylesterases, which have hydrolytic activity predominantly against PET oligomers, esterases related to cutinases also hydrolyze synthetic polymers. The production of these enzymes by actinomycetes as well as their recombinant expression in heterologous hosts is described and their catalytic activity against polyester substrates is compared. Assays to analyze the enzymatic hydrolysis of synthetic polyesters are evaluated, and a kinetic model describing the enzymatic heterogeneous hydrolysis process is discussed. Structure-function and structure-stability relationships of actinomycete polyester hydrolases are compared based on molecular dynamics simulations and recently solved protein structures. In addition, recent progress in enhancing their activity and thermal stability by random or site-directed mutagenesis is presented.

Secretion of recombinant archeal lipase mediated by SVP2 signal peptide in Escherichia coli and its optimization by response surface methodology

Towards the targeting of recombinant Thermoanaerobacter thermohydrosulfuricus lipase (TtL) for secretion into the culture medium of Escherichia coli, we have investigated a combination of the archeal lipase gene with a Salinovibrio metalloprotease (SVP2) signal peptide sequence. The SVP2 signal peptide has shown all necessary features of a leader sequence for high level secretion of a recombinant target protein in E. coli. Two sets of primers were designed for amplification of the corresponding gene fragments by PCR. Firstly, the PCR product of the TtL gene with designed restriction sites of SacI and HindIII was cloned into pQE-80L plasmid, named as pQE80L-TtL. Afterwards, the amplified fragment of SVP2 signal peptide with EcoRI and SacI restriction sites was also cloned into pQE80L-TtL and the final construct pQE-STL was obtained. A study on the extracellular expression of recombinant STL revealed that most of the enzyme activity was located in the periplasmic space. Glycine and Triton X-100 were investigated to determine whether the leakage of recombinant STL from the outer membrane was promoted, and it was revealed that glycine has a positive effect. Statistical media optimization design was then applied to optimize the effect of seven factors including glycine, Triton X-100, IPTG, yeast extract concentration, incubation time, induction time, and temperature on the extracellular expression of STL. The optimum conditions for the secretion of the lipase was obtained by incubating recombinant E. coli BL21 cells in the medium supplemented by 1.27% glycine and 24h of incubation in the presence of 0.2mM IPTG concentration.

Extracellular location of Thermobifida fusca cutinase expressed in Escherichia coli BL21(DE3) without mediation of a signal peptide

Cutinase is a multifunctional esterase with potential industrial applications. In the present study, a truncated version of the extracellular Thermobifida fusca cutinase without a signal peptide (referred to as cutinase(NS)) was heterologously expressed in Escherichia coli BL21(DE3). The results showed that the majority of the cutinase activity was located in the culture medium. In a 3-liter fermentor, the cutinase activity in the culture medium reached 1,063.5 U/ml (2,380.8 mg/liter), and the productivity was 40.9 U/ml/h. Biochemical characterization of the purified cutinase(NS) showed that it has enzymatic properties similar to those of the wild-type enzyme. In addition, E. coli cells producing inactive cutinase(NS)S130A were constructed, and it was found that the majority of the inactive enzyme was located in the cytoplasm. Furthermore, T. fusca cutinase was confirmed to have hydrolytic activity toward phospholipids, an important component of the cell membrane. Compared to the cells expressing the inactive cutinase(NS)S130A, the cells expressing cutinase(NS) showed increased membrane permeability and irregular morphology. Based on these results, a hypothesis of "cell leakage induced by the limited phospholipid hydrolysis of cutinase(NS)" was proposed to explain the underlying mechanism for the extracellular release of cutinase(NS).

Extracellular overexpression of recombinant Thermobifida fusca cutinase by alpha-hemolysin secretion system in E. coli BL21(DE3)

Background

Extracellular expression of proteins has an absolute advantage in a large-scale industrial production. In our previous study, Thermobifida fusca cutinase, an enzyme mainly utilized in textile industry, was expressed via type II secretory system in Escherichia coli BL21(DE3), and it was found that parts of the expressed protein was accumulated in the periplasmic space. Due to the fact that alpha-hemolysin secretion system can export target proteins directly from cytoplasm across both cell membrane of E. coli to the culture medium, thus in the present study we investigated the expression of cutinase using this alpha-hemolysin secretion system.

Results

T. fusca cutinase was fused with the specific signal peptide of alpha-hemolysin scretion system and expressed in E. coli BL21(DE3). In addition, HlyB and HlyD, strain-specific translocation components of alpha-hemolysin secretion system, were coexpressed to facilitate the enzyme expression. The cultivation of this engineered cell showed that cutinase activity in the culture medium reached 334 U/ml, which is 2.5 times that from type II secretion pathway under the same culture condition. The recombinant cutinase was further purified. Biochemical characterization of purified enzyme, which had an α-hemolysin secretion pathway signal peptide attached, had substrate specificity, pH and temperature profile, as well as application capability in bioscouring similar to that of wild-type cutinase.

Conclusions

In the present study, T. fusca cutinase was successfully secreted to the culture media by α-hemolysin secretion system. This is the first report of cutinase being efficiently secreted by this pathway. Due to the limited cases of successful expression of industrial enzyme by E. coli α-hemolysin secretion system, our study further explored the utilization of this pathway in industrial enzymes.