Atmospheric Pressure Plasma Pretreatment of Sugarcane Bagasse: The Influence of Moisture in the Ozonation Process

Advances in physicochemical pretreatment strategies for lignocellulose biomass and their effectiveness in bioconversion for biofuel production

The inherent recalcitrance of lignocellulosic biomass is a significant barrier to efficient lignocellulosic biorefinery owing to its complex structure and the presence of inhibitory components, primarily lignin. Efficient biomass pretreatment strategies are crucial for fragmentation of lignocellulosic biocomponents, increasing the surface area and solubility of cellulose fibers, and removing or extracting lignin. Conventional pretreatment methods have several disadvantages, such as high operational costs, equipment corrosion, and the generation of toxic byproducts and effluents. In recent years, many emerging single-step, multi-step, and/or combined physicochemical pretreatment regimes have been developed, which are simpler in operation, more economical, and environmentally friendly. Furthermore, many of these combined physicochemical methods improve biomass bioaccessibility and effectively fractionate ∼96 % of lignocellulosic biocomponents into cellulose, hemicellulose, and lignin, thereby allowing for highly efficient lignocellulose bioconversion. This review critically discusses the emerging physicochemical pretreatment methods for efficient lignocellulose bioconversion for biofuel production to address the global energy crisis.

Comparison between cold plasma, ultrasonication, and alkaline hydrogen peroxide pretreatments of garden waste to enhance humification in subsequent composting with kitchen waste: Performance and mechanisms

This study compared the performance and mechanisms of cold plasma, ultrasonication, and alkali-assisted hydrogen peroxide for garden waste pretreatment to advance humification in composting with kitchen waste. High-throughput sequencing integrated with Functional Annotation of Prokaryotic Taxa was used to relate bacterial dynamics to humification. Results show that all pretreatment techniques accelerated humification by 37.5% - 45.7% during composting in comparison to the control treatment. Ultrasonication and alkalization preferred to decompose lignocellulose to produce humus precursors in garden waste, thereby facilitating humus formation at the beginning of composting. By contrast, cold plasma was much faster and simpler than other pretreatment techniques to effectively disrupt the surface structure and reduce the crystallinity of garden waste to enrich functional bacteria for aerobic chemoheterotrophy, xylanolysis, cellulolysis, and ligninolysis during composting. As such, a more robust bacterial community was developed after cold plasma pretreatment to advance humification at the mature stage of composting.

Pretreatment and fermentation of lignocellulosic biomass: reaction mechanisms and process engineering

At a time of rapid depletion of oil resources, global food shortages and solid waste problems, it is imperative to encourage research into the use of appropriate pre-treatment techniques using regenerative raw materials such as lignocellulosic biomass.

Unconventional Pretreatment of Lignocellulose with Low-Temperature Plasma

Lignocellulose represents a potential supply of sustainable feedstock for the production of biofuels and chemicals. There is, however, an important cost and efficiency challenge associated with the conversion of such lignocellulosics. Because its structure is complex and not prone to undergo chemical reactions very easily, chemical and mechanical pretreatments are usually necessary to be able to refine them into the compositional building blocks (carbohydrates and lignin) from which value-added platform molecules, such as glucose, ethylene glycol, 5-hydroxymethylfurfural, and levulinic acid, and biofuels, such as bioderived naphtha, kerosene, and diesel fractions, will be produced. Conventional (wet) methods are usually polluting, aggressive, and highly energy consuming, so any alternative activation procedure of the lignocellulose is highly recommended and anticipated in recent and future biomass research. Lignocellulosic plasma activation has emerged as an interesting (dry) treatment technique. In the long run, in particular, in times of fairly accessible renewable electricity, plasma may be considered as an alternative to conventional pretreatment methods, but current knowledge is too little and examples too few to guarantee that statement. This review therefore highlights recent knowledge, advancements, and shortcomings in the field of plasma treatment of cellulose and lignocellulose with regard to the (structural and chemical) effects and impact on the future of pretreatment methods.

Effect of ozonolysis parameters on the inhibitory compound generation and on the production of ethanol by Pichia stipitis and acetone-butanol-ethanol by Clostridium from ozonated and water washed sugarcane bagasse

Sugarcane bagasse (SCB) was ozone pretreated and detoxified by water washing, applying a L9(3)(4) orthogonal array (OA) design of experiments to study the effect of pretreatment parameters (moisture content, ozone concentration, ozone/oxygen flow and particle size) on the generation of inhibitory compounds and on the composition of hydrolysates of ozonated-washed samples. Ozone concentration resulted the highest influence process parameter on delignification and sugar release after washing; while, for inhibitory compound formation, moisture content also had an important role. Ozone expended in pretreatment related directly with sugar release and inhibitory compound formation. Washing detoxification was effective, providing non-inhibitory hydrolysates. Maximum glucose and xylose release yields obtained were 84% and 67%, respectively, for ozonated-washed SCB. Sugar concentration resulted in the decisive factor for biofuels yields. Ethanol production achieved an 88% yield by Pichia stipitis, whereas Clostridium acetobutylicum produced 0.072gBUTANOL/gSUGAR and 0.188gABE/gSUGAR, and, Clostridium beijerinckii 0.165gBUTANOL/gSUGAR and 0.257gABE/gSUGAR.

Effect of ozonolysis pretreatment parameters on the sugar release, ozone consumption and ethanol production from sugarcane bagasse

A L9(3)(4) orthogonal array (OA) experimental design was applied to study the four parameters considered most important in the ozonolysis pretreatment (moisture content, ozone concentration, ozone/oxygen flow and particle size) on ethanol production from sugarcane bagasse (SCB). Statistical analysis highlighted ozone concentration as the highest influence parameter on reaction time and sugars release after enzymatic hydrolysis. The increase on reaction time when decreasing the ozone/oxygen flow resulted in small differences of ozone consumptions. Design optimization for sugars release provided a parameters combination close to the best experimental run, where 77.55% and 56.95% of glucose and xylose yields were obtained, respectively. When optimizing the grams of sugar released by gram of ozone, the highest influence parameter was moisture content, with a maximum yield of 2.98gSUGARS/gO3. In experiments on hydrolysates fermentation, Saccharomyces cerevisiae provided ethanol yields around 80%, while Pichia stipitis was completely inhibited.

Saccharification of ozonated sugarcane bagasse using enzymes from Myceliophthora thermophila JCP 1-4 for sugars release and ethanol production

The saccharification of ozonated sugarcane bagasse (SCB) by enzymes from Myceliophthora thermophila JCP 1-4 was studied. Fungal enzymes provided slightly higher sugar release than commercial enzymes, working at 50°C. Sugar release increased with temperature increase. Kinetic studies showed remarkable glucose release (4.99 g/L, 3%w/w dry matter) at 60°C, 8 h of hydrolysis, using an enzyme load of 10 FPU (filter paper unit). FPase and β-glucosidase activities increased during saccharification (284% and 270%, respectively). No further significant improvement on glucose release was observed increasing the enzyme load above 7.5 FPU per g of cellulose. Higher dry matter contents increased sugars release, but not yields. The fermentation of hydrolysates by Saccharomyces cerevisiae provided glucose-to-ethanol conversions around to 63%.

Ozonolysis: An advantageous pretreatment for lignocellulosic biomass revisited

Ozonolysis, as a lignocellulosic biomass pretreatment, goes back to 80s; however, in the last years it is becoming widespread again owing to its efficiency and mild operation conditions. Ozone reacts preferably with lignin than carbohydrates, promoting biomass destructuration and delignification, and so the sugar release by enzymatic hydrolysis. The hydrolysate from pretreated biomass has being used as sugars source for second-generation fuels production, mainly ethanol, methane and hydrogen. Short-chain carboxylic acids are the main inhibitory compounds generated, being properly removed by water washing. The most common inhibitory compounds reported for other pretreatments, furfural and HMF (5-hydroxymethylfurfural), are not found in ozone-pretreated hydrolysates. Composition of pretreated biomass and ozone consumption depends on several process parameters: reactor design, moisture content, particle size, pH, reaction time, ozone/air flow and ozone concentration. Additional studies are necessary to clarify process parameters effect and to optimize the process to achieve high yields with economic feasibility.

Combined pretreatment using ozonolysis and ball milling to improve enzymatic saccharification of corn straw

Two clean pretreatments, ozonolysis (OZ) and planetary ball milling (BM) were applied separately and in combination to improve the enzymatic hydrolysis of corn straw. Pretreatment of corn straw by OZ and BM alone improved the enzymatic hydrolysis significantly, primarily through delignification and decrystallization of cellulose, respectively. When combined, OZ-BM and BM-OZ pretreatments made the enzymatic hydrolysis more efficient. The glucose and xylose yield of corn straw treated with OZ for 90 min followed by BM for 8 min (OZ90-BM8) reached to 407.8 and 101.9 mg/g-straw, respectively under cellulase loading of 15 FPU/g-straw, which was fivefold more than that of untreated straw. Under much lower cellulase loading of 1.5 FPU/g-straw, the glucose and xylose yield of treated straw OZ90-BM8 remained at 416.0 and 108.4 mg/g-straw, respectively, while the yield of untreated straw decreased. These findings indicate that the combined OZ-BM can be used as a promising pretreatment for corn straw.