Characterization of a Whole-Cell Biotransformation Using a Constitutive Lysine Decarboxylase from Escherichia coli for the High-Level Production of Cadaverine from Industrial Grade l-Lysine

An integrated cofactor and co-substrate recycling pathway for the biosynthesis of 1,5-pentanediol

BACKGROUND

1,5-pentanediol (1,5-PDO) is a linear diol with an odd number of methylene groups, which is an important raw material for polyurethane production. In recent years, the chemical methods have been predominantly employed for synthesizing 1,5-PDO. However, with the increasing emphasis on environmentally friendly production, it has been a growing interest in the biosynthesis of 1,5-PDO. Due to the limited availability of only three reported feasible biosynthesis pathways, we developed a new biosynthetic pathway to form a cell factory in Escherichia coli to produce 1,5-PDO.

RESULTS

In this study, we reported an artificial pathway for the synthesis of 1,5-PDO from lysine with an integrated cofactor and co-substrate recycling and also evaluated its feasibility in E.coli. To get through the pathway, we first screened aminotransferases originated from different organisms to identify the enzyme that could successfully transfer two amines from cadaverine, and thus GabT from E. coli was characterized. It was then cascaded with lysine decarboxylase and alcohol dehydrogenase from E. coli to achieve the whole-cell production of 1,5-PDO from lysine. To improve the whole-cell activity for 1,5-PDO production, we employed a protein scaffold of EutM for GabT assembly and glutamate dehydrogenase was also validated for the recycling of NADPH and α-ketoglutaric acid (α-KG). After optimizing the cultivation and bioconversion conditions, the titer of 1,5-PDO reached 4.03 mM.

CONCLUSION

We established a novel pathway for 1,5-PDO production through two consecutive transamination reaction from cadaverine, and also integrated cofactor and co-substrate recycling system, which provided an alternative option for the biosynthesis of 1,5-PDO.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Recent advances in microbial production of diamines, aminocarboxylic acids, and diacids as potential platform chemicals and bio-based polyamides monomers

Recently, bio-based manufacturing processes of value-added platform chemicals and polymers in biorefineries using renewable resources have extensively been developed for sustainable and carbon dioxide (CO₂) neutral-based industry. Among them, bio-based diamines, aminocarboxylic acids, and diacids have been used as monomers for the synthesis of polyamides having different carbon numbers and ubiquitous and versatile industrial polymers and also as precursors for further chemical and biological processes to afford valuable chemicals. Until now, these platform bio-chemicals have successfully been produced by biorefinery processes employing enzymes and/or microbial host strains as main catalysts. In this review, we discuss recent advances in bio-based production of diamines, aminocarboxylic acids, and diacids, which has been developed and improved by systems metabolic engineering strategies of microbial consortia and optimization of microbial conversion processes including whole cell bioconversion and direct fermentative production.

From Enzyme to Preparative Cascade Reactions with Immobilized Enzymes: Tuning Fe(II)/α-Ketoglutarate-Dependent Lysine Hydroxylases for Application in Biotransformations

Fe(II)/α-ketoglutarate-dependent dioxygenases (KDOs) catalyze a broad range of selective C–H oxidation reactions. However, the difficult production of KDOs in recombinant E. coli strains and their instability in purified form have so far limited their application in preparative biotransformations. Here, we investigated the immobilization of three KDOs (CaKDO, CpKDO, FjKDO) that catalyze the stereoselective hydroxylation of the L-lysine side chain using two one-step immobilization techniques (HaloTag®, EziG™). The HaloTag®-based immobilisates reached the best results with respect to residual activity and stability. In preparative lab-scale experiments, we achieved product titers of 16 g L−1 (3S)-hydroxy-L-lysine (CaKDO) and (4R)-hydroxy-L-lysine (FjKDO), respectively, starting from 100 mM L-lysine. Using a HaloTag®-immobilized lysine decarboxylase from Selenomonas ruminantium (SrLDC), the (3S)-hydroxy-L-lysine from the CaKDO-catalyzed reaction was successfully converted to (2S)-hydroxy-cadaverine without intermediate product purification, yielding a product titer of 11.6 g L−1 in a 15 mL consecutive batch reaction. We propose that covalent in situ immobilization is an appropriate tool to access the preparative potential of many other KDOs.

Ameliorating end-product inhibition to improve cadaverine production in engineered Escherichia coli and its application in the synthesis of bio-based diisocyanates

Cadaverine is an important C5 platform chemical with a wide range of industrial applications. However, the cadaverine inhibition on the fermenting strain limited its industrial efficiency of the strain. In this study, we report an engineered Escherichia coli strain with high cadaverine productivity that was generated by developing a robust host coupled with metabolic engineering to mitigate cadaverine inhibition. First, a lysine producing E. coli was treated with a combination of radiation (ultraviolet and visible spectrum) and ARTP (atmospheric and room temperature plasma) mutagenesis to obtain a robust host with high cadaverine tolerance. Three mutant targets including HokD, PhnI and PuuR are identified for improved cadaverine tolerance. Further transcriptome analysis suggested that cadaverine suppressed the synthesis of ATP and lysine precursor. Accordingly, the related genes involved in glycolysis and lysine precursor, as well as cadaverine exporter was engineered to release the cadaverine inhibition. The final engineered strain was fed-batch cultured and a titer of 58.7 g/L cadaverine was achieved with a yield of 0.396 g/g, both of which were the highest level reported to date in E. coli. The bio-based cadaverine was purified to >99.6% purity, and successfully used for the synthesis of polyurethane precursor 1,5-pentamethylene diisocyanate (PDI) through the approach of carbamate decomposition.

Fabrication of bio-based polyamide 56 and antibacterial nanofiber membrane from cadaverine

A green bioprocess for the fabrication of nanofiber membranes from the biomaterial polyamide 56 (PA56) via electrospinning was proposed. Cadaverine, as the precursor of PA56, was first produced from recombinant Escherichia coli using the whole-cell biotransformation of lysine. PA56 was then fabricated by mixing adipic acid with purified cadaverine obtained from solvent extraction and distillation. The thermal properties of the fabricated PA56 are as follows: a melting point of 250 °C, a crystallization point of 220 °C, and a degradation temperature of 410 °C. A PA56 nanofiber membrane (PAM) was further prepared via electrospinning. Dyed membranes (P-Dye) were obtained by the reaction of Reactive Red 141 dye with the amino group of PAM. Poly-(hexamethylene biguanide) (PHMB) was attached to the P-Dye to create P-Dye-PHMB. On the other hand, PAM with alginate, used to facilitate PHMB attachment (P-Alg-PHMB), was compared with P-Dye-PHMB in terms of antibacterial activity against pathogenic strains of E. coli and Pseudomonas putida. P-Alg-PHMB showed excellent antibacterial efficiency for E. coli (97%) and P. putida (100%). The proposed bioprocess can be used to fabricate novel membranes for biomedical applications and functional textiles.

Improvement of cadaverine production in whole cell system with baker's yeast for cofactor regeneration

Cadaverine, 1,5-diaminopentane, is one of the most promising chemicals for biobased-polyamide production and it has been successfully produced up to molar concentration. Pyridoxal 5'-phosphate (PLP) is a critical cofactor for inducible lysine decarboxylase (CadA) and is required up to micromolar concentration level. Previously the regeneration of PLP in cadaverine bioconversion has been studied and salvage pathway pyridoxal kinase (PdxY) was successfully introduced; however, this system also required a continuous supply of adenosine 5'-triphosphate (ATP) for PLP regeneration from pyridoxal (PL) which add in cost. Herein, to improve the process further a method of ATP regeneration was established by applying baker's yeast with jhAY strain harboring CadA and PdxY, and demonstrated that providing a moderate amount of adenosine 5'-triphosphate (ATP) with the simple addition of baker's yeast could increase cadaverine production dramatically. After optimization of reaction conditions, such as PL, adenosine 5'-diphosphate, MgCl₂, and phosphate buffer, we able to achieve high production (1740 mM, 87% yield) from 2 M L-lysine. Moreover, this approach could give averaged 80.4% of cadaverine yield after three times reactions with baker's yeast and jhAY strain. It is expected that baker's yeast could be applied to other reactions requiring an ATP regeneration system.

Integrated gene engineering synergistically improved substrate-product transport, cofactor generation and gene translation for cadaverine biosynthesis in E. coli

Several approaches for efficient production of cadaverine, a bio-based diamine with broad industrial applications have been explored. Here, Serratia marcescens lysine decarboxylase (SmcadA) was expressed in E. coli; mild surfactants added in biotransformation reactions; the E. coli native lysine/cadaverine antiporter cadB, E. coli pyridoxal kinases pdxK and pdxY overexpressed and synthetic RBS libraries screened. Addition of mild surfactants and overexpression of antiporter cadB increased cadaverine biosynthesis of SmcadA. Moreover, expression of pdxY gene yielded 19.82 g/L in a reaction mixture containing added cofactor precursor pyridoxal (PL), without adding exogenous PLP. The screened synthetic RBS1, applied to fully exploit pdxY gene expression, ultimately resulted in PLP self-sufficiency, producing 27.02 g/L cadaverine using strain T7R1_PL. To boost SmcadA catalytic activity, the designed mutants Arg595Lys and Ser512Ala had significantly improved cumulative cadaverine production of 219.54 and 201.79 g/L respectively compared to the wild-type WT (181.62 g/L), after 20 h reaction. Finally, molecular dynamics simulations for WT and variants indicated that increased flexibility at the binding sites of the protein enhanced residue-ligand interactions, contributing to high cadaverine synthesis. This work demonstrates potential of harnessing different pull factors through integrated gene engineering of efficient biocatalysts and gaining insight into the mechanisms involved through MD simulations.

High-efficiency and low-cost production of cadaverine from a permeabilized-cell bioconversion by a Lysine-induced engineered Escherichia coli

Cadaverine is the monomer of bio-based nylons polyamide 5.4, 5.6 and 5.10. In this study, a litre-scale integrated strategy was developed for high-efficiency and low-cost production of cadaverine using an engineered Escherichia coli. Firstly, the engineered strain BL21-P_cad-CadA induced by cheap l-lysine-HCl instead of IPTG was constructed. Then the permeabilized cells were served as the biocatalyst for the production of cadaverine, because the enhanced permeability facilitated the mass transfer of the substrate and the release of products. After the replacement of industrial materials and the solution of the scale-up permeabilization process, cadaverine concentration reached 205 g/L with the yield of 92.1% after 20 h in a 2 L bioconversion system, achieving the level of industrial production. Furthermore, the costs of industrial materials for 2 L integrated strategy ($2.78) was only 1/11 of the lab reagents ($30.88). Therefore, the proposed strategy is a promising candidate for the industrial process of cadaverine.

Microbial Engineering for Production of N-Functionalized Amino Acids and Amines

N-functionalized amines play important roles in nature and occur, for example, in the antibiotic vancomycin, the immunosuppressant cyclosporine, the cytostatic actinomycin, the siderophore aerobactin, the cyanogenic glucoside linamarin, and the polyamine spermidine. In the pharmaceutical and fine-chemical industries N-functionalized amines are used as building blocks for the preparation of bioactive molecules. Processes based on fermentation and on enzyme catalysis have been developed to provide sustainable manufacturing routes to N-alkylated, N-hydroxylated, N-acylated, or other N-functionalized amines including polyamines. Metabolic engineering for provision of precursor metabolites is combined with heterologous N-functionalizing enzymes such as imine or ketimine reductases, opine or amino acid dehydrogenases, N-hydroxylases, N-acyltransferase, or polyamine synthetases. Recent progress and applications of fermentative processes using metabolically engineered bacteria and yeasts along with the employed enzymes are reviewed and the perspectives on developing new fermentative processes based on insight from enzyme catalysis are discussed.

Crystal structure, thermodynamics, and crystallization of bio-based polyamide 56 salt

Polyamide 56 is regarded as one of the most promising materials for the textile industry. This report gives the crystallization route of high-quality polyamide 56 monomers, and its crystal structure, transformation behaviors, and solubility.

High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase

Cadaverine is a C5 diamine monomer used for the production of bio-based polyamide 510. Cadaverine is produced by the decarboxylation of l-lysine using a lysine decarboxylase (LDC). In this study, we developed recombinant Escherichia coli strains for the expression of LDC from Hafnia alvei. The resulting recombinant XBHaLDC strain was used as a whole cell biocatalyst for the high-level bioconversion of l-lysine into cadaverine without the supplementation of isopropyl β-d-1-thiogalactopyranoside (IPTG) for the induction of protein expression and pyridoxal phosphate (PLP), a key cofactor for an LDC reaction. The comparison of results from enzyme characterization of E. coli and H. alvei LDC revealed that H. alvei LDC exhibited greater bioconversion ability than E. coli LDC due to higher levels of protein expression in all cellular fractions and a higher specific activity at 37 °C (1825 U/mg protein > 1003 U/mg protein). The recombinant XBHaLDC and XBEcLDC strains were constructed for the high-level production of cadaverine. Recombinant XBHaLDC produced a 1.3-fold higher titer of cadaverine (6.1 g/L) than the XBEcLDC strain (4.8 g/L) from 10 g/L of l-lysine. Furthermore, XBHaLDC, concentrated to an optical density (OD₆₀₀) of 50, efficiently produced 136 g/L of cadaverine from 200 g/L of l-lysine (97% molar yield) via an IPTG- and PLP-free whole cell bioconversion reaction. Cadaverine synthesized via a whole cell biocatalyst reaction using XBHaLDC was purified to polymer grade, and purified cadaverine was successfully used for the synthesis of polyamide 510. In conclusion, an IPTG- and PLP-free whole cell bioconversion process of l-lysine into cadaverine, using recombinant XBHaLDC, was successfully utilized for the production of bio-based polyamide 510, which has physical and thermal properties similar to polyamide 510 synthesized from chemical-grade cadaverine.